On a system where ‘apt-get update’ has never been run, ‘apt-cache
policy’ may show no repositories at all. Try to correct this with
‘apt-get update’ before giving up.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
The certbot package installs its own systemd timer (and cron job,
which disabled itself if systemd is enabled) which updates
certificates. This process races with the cron job which Zulip
installs -- the only difference being that Zulip respects the
`certbot.auto_renew` setting, and that it passes the deploy hook.
This means that occasionally nginx would not be reloaded, when the
systemd timer caught the expiration first.
Remove the custom cron job and `certbot-maybe-renew` script, and
reconfigure certbot to always reload nginx after deploying, using
certbot directory hooks.
Since `certbot.auto_renew` can't have an effect, remove the setting.
In turn, this removes the need for `--no-zulip-conf` to
`setup-certbot`. `--deploy-hook` is similarly removed, as running
deploy hooks to restart nginx is now the default; pass
`--no-directory-hooks` in standalone mode to not attempt to reload
nginx. The other property of `--deploy-hook`, of skipping symlinking
into place, is given its own flog.
We've had a number of unhappy reports of upgrades failing due to
webpack requiring too much memory. While the previous commit will
likely fix this issue for everyone, it's worth improving the error
message for failures here.
We avoid doing the stop+retry ourselves, because that could cause an
outage in a production system if webpack fails for another reason.
Fixes#20105.
Since the upgrade to Webpack 5, we've been seeing occasional reports
that servers with roughly 4GiB of RAM were getting OOM kills while
running webpack.
Since we can't readily optimize the memory requirements for webpack
itself, we should raise the RAM requirements for doing the
lower-downtime upgrade strategy.
Fixes#20231.
scripts.lib.node_cache expects Yarn to be in /srv/zulip-yarn, so if
it’s installed somewhere else, even if it’s the right version, we need
to reinstall it.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
It recently started failing on Debian 10 (buster). We immediately
follow this by replacing these packages with our own versions from
pip.txt, anyway.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
The support for bullseye was added in #17951
but it was not documented as bullseye was
frozen and did not have proper configuration
files, hence wasn't documented.
Since now bullseye is released as a stable
version, it's support can be documented.
The usual output from this command looks like
Notice: Compiled catalog for localhost in environment production in 2.33 seconds
Notice: /Stage[main]/Zulip::Apt_repository/Exec[setup_apt_repo]/returns: current_value 'notrun', should be ['0'] (noop)
Notice: Class[Zulip::Apt_repository]: Would have triggered 'refresh' from 1 event
Notice: Stage[main]: Would have triggered 'refresh' from 1 event
Notice: Applied catalog in 1.20 seconds
which doesn’t seem abnormally alarming, and hiding it makes failures
harder to diagnose.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
These changes are all independent of each other; I just didn’t feel
like making dozens of commits for them.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Nonexistent processes and groups passed to `supervisortctl status` are
printed to STDOUT as follows:
```
$ supervisorctl status zulip-django nonexistent-process nonexistent-group:*
nonexistent-process: ERROR (no such process)
nonexistent-group: ERROR (no such group)
zulip-django RUNNING pid 16043, uptime 17:31:31
```
On supervisor 4 and above, this exits with an exit code of 4;
previously, it returned exit code 0. Ubuntu 18.04 has version 3.3.1,
and Ubuntu 20.04 has version 4.1.0.
Skip any lines with `ERROR (no such ...)`, and accept exit code 4 from
`supervisorctl status`.
This parameter is somewhat useful, and adding this also fixes a
regression where purge-old-deployments would crash since the changes
around c5580607a7 because of
inconsistent supported args lists.
Fixes#16659.
If the server is behind a reverse proxy with http_only=True, the
requests made by email-mirror-postfix need to use http, as https
doesn't work.
Staging and other hosts that are `zulip::app_frontend_base` but not
`zulip::app_frontend_once` do not have a
/etc/supervisor/conf.d/zulip/zulip-once.conf and as such do not have
`zulip_deliver_scheduled_emails` or `zulip_deliver_scheduled_messages`
and thus supervisor will fail to reload.
Making the contents of `zulip-workers` contingent on if the server is
_also_ a `-once` server is complicated, and would involve using Concat
fragments, which severely limit readability.
Instead, expel those two from `zulip-workers`; this is somewhat
reasonable, since they are use an entirely different codepath from
zulip_events_*, using the database rather than RabbitMQ for their
queuing.
This commit will allow us to pass the arguments in the
'clean...' functions when calling the `main` function (in
`provision`). It also changes args parsing
function location to `if __name__ == "__main__"` block as
we wouldn't need it to parse args when we call the
function.
We convert the `clean-unused-caches` script to a
python file so we can run it in provision by importing it
instead of running the script, hence saving some time.
Appending data back-to-back without serializing it loses the
information about where the breaks between them lie, which can lead to
different inputs having the same hash.
Using puppet modules from the puppet forge judiciously will allow us
to simplify the configuration somewhat; this specifically pulls in the
stdlib module, which we were already using parts of.
This moves the `.asc` files into subdirectories, and writes out the
according `.list` files into them. It moves from templates to
written-out `.list` files for clarity and ease of
implementation (Debian and Ubuntu need different templates for
`zulip`), and as a way of making explicit which releases are supported
for each list. For the special-case of the PGroonga signing key, we
source an additional file within the directory.
This simplifies the process for adding another class of `.list` file.
Add support for custom database names and database users, which can be
set with the `--postgresql-database-name` and
`--postgresql-database-user` install script options. If these
parameters aren't provided, then the defaults remain "zulip".
Fixes#17662.
Co-authored-by: Alex Vandiver <alexmv@zulip.com>
Add a helper `run_psql_as_postgres` function in
`scripts/lib/zulip_tools.py`. This is preparatory refactoring for the
work to add custom database and user names.
Fixes this error when running the installer from a directory that
isn’t world-readable:
+ su zulip -c 'git config --global user.email anders@zulip.com'
fatal: cannot come back to cwd: Permission denied
Signed-off-by: Anders Kaseorg <anders@zulip.com>
When upgrading from a pre-4.0 release, scripts/stop-server logic would
check whether supervisord configuration files were present to
determine what it needed to restart, but only considered paths to
those files that are introduced in Zulip 4.0.
Fixed#18493.
This ensures that the `git describe` queries that we run for caching
Zulip's Git version are guaranteed to include recent releases.
This change ensures that we have accurate output even if we're pointed
at a fork of Zulip that never updates its tags.
Additionally, it will make it possible to record the
`git merge-base upstream/master` in future commits.
Note that because we run this code before unpacking the new version,
the pre-upgrade version of this code runs.
As a result, we cannot assume that the upstream repository exists.
This removes a possible window where an installer error could leave
`nvm` in a state where it had prepended the full path to the
newly-installed `npm` to `$PATH`; we would like to avoid `nvm`
fiddling with path whenever possible (ref ebe930ab2c).
During the upgrade process of a postgresql-only Zulip installation,
(`puppet_classes = zulip::profile::postgresql` in
`/etc/zulip/zulip.conf`) either `scripts/start-server` or
`scripts/stop-server` fail because they try to handle supervisor
services that are not available (e.g. Tornado) since only
`/etc/supervisor/conf.d/zulip/zulip_db.conf` is present and not
`/etc/supervisor/conf.d/zulip/zulip.conf`.
While this wasn't previously supported, it's a pretty reasonable thing
to do, and can be readily supported by just adding a few conditionals.
Thumbor and tc-aws have been dragging their feet on Python 3 support
for years, and even the alphas and unofficial forks we’ve been running
don’t seem to be maintained anymore. Depending on these projects is
no longer viable for us.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
The `en_US.UTF-8` locale may not be configured or generated on all
installs; it also requires that the `locales` package be installed.
If users generate the `en_US.UTF-8` locale without adding it to the
permanent set of system locales, the generated `en_US.UTF-8` stops
working when the `locales` package is updated.
Switch to using `C.UTF-8` in all cases, which is guaranteed to be
installed.
Fixes#15819.
In some cases, puppet can end up restarting supervisord services - which
will use code from the old deployment, because when puppet runs,
/home/zulip/deployments/current still points there. Thus restart-server
needs to be used in favor of start-server, unless we know that puppet
has been skipped.
Previous versions of zulip used `nvm alias default ...` to have `nvm`
prepend the full path to the latest `node` install to the `PATH` in
root's shell. Unfortunately, this means that `update-prod-static`,
when called from `upgrade-zulip-stage-2` after an upgrade of node in
`install-node`, would still have the full path to the _old_ `node` at
the start of its PATH, because the PATH of `upgrade-zulip-stage-2`
would still be unchanged.
Bootstrap out of this by setting a known-reasonable PATH during
upgrade, and remove the problematic `nvm alias default` behaviour.
Fixes#18258.
In Debian, becoming root as `su` does not alter the `$PATH`; this can
lead to the root user not having `/usr/sbin` in its path, and thus
the `useradd zulip` step of the installer fails.
Fixes#17441.
This commit removes redundant yarn cache by removing the old
version directories, i.e. All the directory under `~/.cache/yarn`
except `~/.cache/yarn/v6` (current version directory).
Fixes#15964.
The path which contains all of the Zulip supervisor files changed in
3ab9b31d2f to make it easier to purge
now-unwanted supervisor configuration files. However, the paths that
the zulip upgrade process, and restart-server, look at were not
adjusted.
Fix the supervisor configuration file paths.
3314fefaec started needing `python3-yaml`, but incorrectly claimed
that it was always an indirect dependency; it is a dependency of
`ubuntu-minimal` on 20.04, but not required on 18.04 or Debian. We
cannot install it in puppet because then is definitionally too late;
it is needed at load time by `zulip-puppet-apply`.
Install `python3-yaml`, but guarded by a simple check so as to not
further slow most installs.
Fixes#18179.
The stacktraces here are seldom useful -- for the calls to
upgrade-stage-2, we know precisely what was run. For the `run`
wrapper, the output contains the command that failed, which is
sufficient to identify where in the upgrade process it was. Showing
more stacktrace below the actual error merely confuses users and
scrolls the real error off of the screen.
For installs which use the `upgrade-zulip-from-git` process, the
deployment directory is a git checkout. This means that an
administrator can, as an emergency tool, run `git revert` and similar
commands -- assuming there is a `~/.gitconfig` set up for the zulip
user.
Add commands to `scripts/lib/install` to create a `~/.gitconfig` file
at installation time. The `user.name` and `user.email` fields are set
to the hostname and passed-in `--email` value, respectively.
Fixes#18039.
0663b23d54 changed zulip-puppet-apply to
use the venv, because it began using `yaml` to parse the output of
puppet to determine if changes would happen.
However, not every install ends with a venv; notably, non-frontend
servers do not have one. Attempting to run zulip-puppet-apply on them
hence now fails.
Remove this dependency on the venv, by installing a system
python3-yaml package -- though in reality, this package is already an
indirect dependency of the system. Especially since pyyaml is quite
stable, we're not using it in any interesting way, and it does not
actually add to the dependencies, it is preferable to parsing the YAML
by hand in this instance.
When exception is raised inside an exception handler, Python 3
helpfully prints both tracebacks separated by “During handling of the
above exception, another exception occurred:”. But when we’re using
an exception handler to retry the same operation, multiple tracebacks
are just noise. Suppress the earlier one using PEP 409 syntax.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
This means that in steady-state, `zulip-puppet-apply` is expected to
produce no changes or commands to execute. The verification step of
`setup-apt-repo` is quite fast, so this cleans up the output for very
little cost.
The class names need to be renamed even if we are not about to run
puppet ourselves; otherwise, deployments which rely on running puppet
themselves will still have the wrong class names.
These are respected by `urllib`, and thus also `requests`. We set
`HTTP_proxy`, not `HTTP_PROXY`, because the latter is ignored in
situations which might be running under CGI -- in such cases it may be
coming from the `Proxy:` header in the request.
Anders Kaseorg
Alex Vandiver
Tim Abbott
rht
Gaurav Pandey
manavdesai27
Mateusz Mandera
Riken Shah
Adam Birds
Robert Imschweiler
Siddharth Asthana
Ganesh Pawar
Sutou Kouhei