Kind of unfortunate because the `sudo` interface for running a command
is objectively better -- a list of arguments, rather than a string to
be re-parsed by the shell. But some bare-bones machine images lack
`sudo`, so this makes things a bit more portable.
We'll make this the normal behavior soon, once we're satisfied with
our arrangements for sending the admin straight to realm creation and
using the app without configuring email. The instructions in the docs
will also have to change accordingly, of course.
This causes us to give an error if you pass the installer any
positional arguments, e.g. with `--`. There's no reason you'd want
to do this, but I accidentally did it by passing an extra `--` to
the `test-install/install` wrapper and spent a few minutes on
confused debugging.
This gives us just one way of adopting a self-signed cert, rather than
one script which would generate a new one and an option to another
which would symlink to the system's snakeoil cert. Now those two
codepaths converge, and do the same thing.
The small advantage of generating our own over the alternative is that
it lets us set the name in the cert to EXTERNAL_HOST, rather than the
system's hostname as embedded in the system snakeoil certs. Not a big
deal, but might make things go slightly smoother if some browsers are
lenient (in a way that they probably shouldn't be.)
Before this fix, the installer has an extremely annoying bug where
when run inside a container with `lxc-attach`, when the installer
finishes, the `lxc-attach` just hangs and doesn't respond even to
C-c or C-z. The only way to get the terminal back is to root around
from some other terminal to find the PID and kill it; then run
something like `stty sane` to fix the messed-up terminal settings
left behind.
After bisecting pieces of the install script to locate which step
was causing the issue, it comes down to the `service camo restart`.
The comment here indicates that we knew about an annoying bug here
years ago, and just swept it under the rug by skipping this step
when in Travis. >_<
The issue can be reproduced by running simply `service camo restart`
under `lxc-attach` instead of the installer; or `service camo start`,
following a `service camo stop`. If `lxc-attach` is used to get an
interactive shell, these commands appear to work fine; but then when
that shell exits, the same hang appears. So, when we start camo
we're evidently leaving some kind of mess that entangles the daemon
with our shell.
Looking at the camo initscript where it starts the daemon, there's
not much code, and one flag jumps out as suspicious:
start-stop-daemon --start --quiet --pidfile $PIDFILE -bm \
--exec $DAEMON --no-close -c nobody --test > /dev/null 2>&1 \
|| return 1
start-stop-daemon --start --quiet --pidfile $PIDFILE -bm \
--no-close -c nobody --exec $DAEMON -- \
$DAEMON_ARGS >> /var/log/camo/camo.log 2>&1 \
|| return 2
What does `--no-close` do?
-C, --no-close
Do not close any file descriptor when forcing the daemon
into the background (since version 1.16.5). Used for
debugging purposes to see the process output, or to
redirect file descriptors to log the process output.
And in fact, looking in /proc/PID/fd while a hang is happening finds
that fd 0 on the camo daemon process, aka stdin, is connected to our
terminal.
So, stop that by denying the initscript our stdin in the first place.
This fixes the problem.
The Debian maintainer turns out to be "Zulip Debian Packaging Team",
at debian@zulip.com; so this package and its bugs are basically ours.
This provides a major simplification for non-production installs,
including our own testing (it's already in both the test-install
harness script and the "production" test suite) as well as potential
admins evaluating Zulip.
Ultimately this should probably be the default behavior, with perhaps
something shown to admins on the web as a reminder and link to help on
installing a better certificate. For now, pending working through
that, just get the behavior in and leave it opt-in.
The third-party `install-yarn.sh` script uses `curl`, and we invoke it
in `install-node`. So we need to install it as a dependency.
We've mostly gotten away with this because it's common for `curl` to
already be installed; but it isn't always.
This updates commit 11ab545f3 "install: Set the locale ..."
to be somewhat cleaner, and to explain more in the commit message.
In some environments, either pip itself fails or some packages fail to
install, and setting the locale to en_US.UTF-8 resolves the issue.
We heard reports of this kind of behavior with at least two different
sets of symptoms, with 1.7.0 or its release candidates:
https://chat.zulip.org/#narrow/stream/general/subject/Trusty.201.2E7.20Upgrade/near/302214https://chat.zulip.org/#narrow/stream/production.20help/subject/1.2E6.20to.201.2E7/near/306250
In all reported cases, commit 11ab545f3 or equivalent fixed the issue.
Setting LC_CTYPE is redundant when also setting LC_ALL, because LC_ALL
overrides all `LC_*` environment variables; so skip that. Also move
the line in `install` to a more appropriate spot, and adjust the
comments.
This allows the installer to continue using this script for the
`standalone` method, while the no-argument form now uses the same
`webroot` method as the renewal cron job, suitable for running
by hand to adopt Certbot after initial install.
This causes the cron job to run only when a Zulip-managed certbot
install is actually set up.
Inside `install`, zulip.conf doesn't yet exist when we run
setup-certbot, so we write the setting later. But we also give
setup-certbot the ability to write the setting itself, so that we
can recommend it in instructions for adopting certbot in an
existing Zulip installation.
This should make it easier to script the installation process, and
also conveniently are the options one would want for the --certbot
option.
Significantly modified by tabbott to have a sane right interface,
include --help, and avoid printing all the `set -x` garbage before the
usage notices.
Historically, one has needed to build a release tarball in order to
use/test the Zulip installer, but you could upgrade a Zulip server
from Git. However, the only reason for that requirement was that we
didn't run `tools/update-prod-static` as part of the install script if
it's required. A good test for that case is whether we're in a Git
repository, but a better one is to check whether the prod-static
content exists in the tarball paths.
Fixes#3704.
This should make it much more likely that users see this before
waiting a long time for other things to happen, since the `apt-get
dist-upgrade` step is really slow. We can't move further to the top,
since this requires `lsb_release` to be installed.
This indirectly causes the RabbitMQ node name for new Zulip
installations to default to zulip@localhost, which would eliminate the
persistent problems we have had
Fixes#194, #465, #1375, #1751.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
This adds a dependency on the realpath package on trusty; we could try
to remove it if needed, but given that realpath is included in
coreutils on Xenial (and presumably anything else modern), I think
it's reasonable to add it.
Fixes#1797.
generate-secrets.py now requires --development for development environment
setup or --production for production environment setup (and one of these
options is mandatory).
This solves the problem that it was somewhat easy to accidentally run
generate-secrets.py without the `-d` option while doing manual development
environment setup.
Fixes: #1911.
Because rabbitmq doesn't support changing the nodename of a running
rabbitmq node, Zulip installations suffered a plague of issues where
e.g. a Zulip server would reboot, the hostname would change, and
suddenly the local rabbitmq instance being used by Zulip would stop
working.
We address this problem by using, by default, a fixed rabbitmq
nodename, but providing server administrators the option to set the
rabbitmq nodename used by Zulip however they choose.
To upgrade an existing server to use this new configuration, one will
need to add something like the following to /etc/zulip/zulip.conf:
[rabbitmq]
nodename = zulip@localhost
However, I don't believe we have the puppet code in place to make this
work correctly at initial installation without rabbitmq-server being
already installed (but off), as we can easily setup in Travis CI but I
haven't been willing to do for the installer. So for now, this just
fixes our Travis CI problems.
Fixes: #1579.
This reverts commit 3f95e567c1.
Apparently `apt-add-repository` fails periodically in CI. I suspect
this is some sort of silly networking problem, but given that all
we're saving is a few lines of code, the old version was better if
this fails basically ever.
Previously, the install script would fail if you passed various
non-default puppet rules, since the code to configure and restart
services that runs later on in the install script largely ran
unconditionally, regardless of whether the relevant service was
actually installed on the target system.
This should make the main install script reusable for installing
e.g. a dedicated Postgres server for use with Zulip.
Camo is a caching image proxy, used in Zulip to avoid mixed-content
warnings by proxying HTTP image content over HTTPS. We've been using
it in zulip.com production for years; this change makes it available
in standalone Zulip deployments.
With this change, we are now testing the production static asset
pipeline and installation process in a new testing job (and also run
the frontend/backend tests separately).
This means that changes that break the Zulip static asset pipeline or
production installation process are more likely to fail tests. The
testing is imperfect in that it does not have proper isolation -- we
build a complete Zulip development environment and then install a
Zulip production environment on top of it, so e.g. any apt
dependencies installed for Zulip development will still be available
for the Zulip production environment. But, it's better than nothing!
A good v2 of this would be to have the production setup process just
install the minimum stuff needed to run `build-release-tarball` and
then uninstall it / clean it up so that we can do a more clear
production installation, but that's more work.
While the docu on https://www.zulip.org/server.html says:
```
cd /root/zulip
./scripts/setup/install
```
This script downloads the `python-django-guardian_1.3-1~zulip4_all.deb` file to current working dir (`/root/zulip` if you follow the docu), but tries to install it from /root/.
This fails obviously. So i changed the download location to /tmp/.
We don't use apache in the main app -- only for the SSO situation --
this code was just copied from our own install script. And it caused
problems at CUSTOMER13 because they installed Apache in preparation for
the SSO integration, but restarting it failed.
(imported from commit 3f2961574134847c836e8b69736f60d9f8790201)
Greg Price
Tim Abbott
rht
Igor Tokarev
Anders Kaseorg
Diptanshu8
Taranjeet Singh
Tim Abbott
Alexander Trost
Eklavya Sharma
Vladislav Manchev
Andreas Litt
Tim Abbott
David Roe
Jonathan Dahan
Luke Faraone
Zev Benjamin