This line was effectively hardcoding a specific stream_post_policy,
overriding the value already present in the event, to no purpose.
(I believe it got here via cargo-culting induced by #13787.)
This commit removes is_old_stream property from the stream objects
returned by the API. This property was unnecessary and is essentially
equivalent to 'stream_weekly_traffic != null'.
We compute sub.is_old_stream in stream_data.update_calculated_fields
in frontend code and it is used to check whether we have a non-null
stream_weekly_traffic or not.
Fixes#15181.
This likely fix a bug that can leak thousands of messages into the
invalid state where:
* user_message.flags.active_mobile_push_notification is True
* user_message.flags.read is True
which is intended to be impossible except during the transient process
between marking messages as read sending the "remove push
notifications" event.
The bug is that if a user who is declaring bankruptcy with 10,000s of
unreads ends up having the database query to mark all of those as read
take 60s, the Django/uwsgi request will time out and kill the process.
If the postgres transaction still completes, we'll end up with the
second half of this function never being run.
A safer ordering is to do the smaller queries first.
We do this in a loop for correctness in the unlikely event there are
more than 10,000 of these.
Fixes#15285
This event will be used more now for guest users when moving
topic between streams (See #15277). So, instead of deleting
messages in the topic as part of different events which is
very slow and a bad UX, we now handle the messages to delete in
bulk which is a much better UX.
After merging PR #15355 we found that CircleCI may send
super minimal payloads. This does not seem to depend on
.circleci/config.yml since we received two different
types of payloads off of the same configuration.
Signed-off-by: Hemanth V. Alluri <hdrive1999@gmail.com>
This is designed to have no user-facing change unless the client
declares bulk_message_deletion in its client_capabilities.
Clients that do so will receive a single bulk event for bulk deletions
of messages within a single conversation (topic or PM thread).
Backend implementation of #15285.
This commits adds restriction on admins to set message retention policy.
We now only allow only organization owners to set message retention
policy.
Dropdown for changing retention policy is disabled in UI for admins also.
Whenever we use API queries to mark messages as read we now increment
two new LoggingCount stats, messages_read::hour and
messages_read_interactions::hour.
We add an early return in do_increment_logging_stat function if there
are no changes (increment is 0), as an optimization to avoid
unnecessary database queries.
We also log messages_read_interactions::hour Logging stat
as the number of API queries to mark messages as read.
We don't include tests for the case where do_update_pointer is called
because do_update_pointer will most likely be removed from the
codebase in the near future.
This uses `where_active_push_notification()` instead of
the flag condition to keep it consistent with the app
code as we use the same function to filter active push
notifications everywhere else.
Overrides some of internal functions of python-social-auth
to handle native flow.
Credits to Mateusz Mandera for the overridden functions.
Co-authored-by: Mateusz Mandera <mateusz.mandera@zulip.com>
This adds a powerful end-to-end test for Zulip's API documentation:
For every documented API endpoint (with a few declared exceptions that
we hope to remove), we verify that every API response received by our
extensive backend test suite matches the declared schema.
This is a critical step towards being able to have complete, high
quality API documentation.
Fixes#15340.
When doing query for same topic names in a stream, we should do a
case-insensitive exact match for the topic, since that's the data
model for topics in Zulip.
This is a test case verifying the current codebase produces incorrect
results. All the messages should have been edited in this case
regardless of the topic's case unless they belong to a different
stream.
Generated by pyupgrade --py36-plus --keep-percent-format.
Now including %d, %i, %u, and multi-line strings.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
The Python 3.6 style does support non-total and even partially-total
TypedDict, but total gives us better guarantees.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
The narrow parameter was incorrectly documented as a one-level array
rather than an array of arrays, and the tests incorrectly expected
this due to a combination of design and implementation bugs.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Use read-only types (List ↦ Sequence, Dict ↦ Mapping, Set ↦
AbstractSet) to guard against accidental mutation of the default
value.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
There seems to have been a confusion between two different uses of the
word “optional”:
• An optional parameter may be omitted and replaced with a default
value.
• An Optional type has None as a possible value.
Sometimes an optional parameter has a default value of None, or None
is otherwise a meaningful value to provide, in which case it makes
sense for the optional parameter to have an Optional type. But in
other cases, optional parameters should not have Optional type. Fix
them.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
We triage on the event's "op" field instead
of using the type check.
And then we still get the implicit assertion
that we any "add" event produces a dict
for "subscriptions", since we dereference it
in the assertion for "subscribers".
Fixes#2665.
Regenerated by tabbott with `lint --fix` after a rebase and change in
parameters.
Note from tabbott: In a few cases, this converts technical debt in the
form of unsorted imports into different technical debt in the form of
our largest files having very long, ugly import sequences at the
start. I expect this change will increase pressure for us to split
those files, which isn't a bad thing.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Automatically generated by the following script, based on the output
of lint with flake8-comma:
import re
import sys
last_filename = None
last_row = None
lines = []
for msg in sys.stdin:
m = re.match(
r"\x1b\[35mflake8 \|\x1b\[0m \x1b\[1;31m(.+):(\d+):(\d+): (\w+)", msg
)
if m:
filename, row_str, col_str, err = m.groups()
row, col = int(row_str), int(col_str)
if filename == last_filename:
assert last_row != row
else:
if last_filename is not None:
with open(last_filename, "w") as f:
f.writelines(lines)
with open(filename) as f:
lines = f.readlines()
last_filename = filename
last_row = row
line = lines[row - 1]
if err in ["C812", "C815"]:
lines[row - 1] = line[: col - 1] + "," + line[col - 1 :]
elif err in ["C819"]:
assert line[col - 2] == ","
lines[row - 1] = line[: col - 2] + line[col - 1 :].lstrip(" ")
if last_filename is not None:
with open(last_filename, "w") as f:
f.writelines(lines)
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
This commit adds three `.pysa` model files: `false_positives.pysa`
for ruling out false positive flows with `Sanitize` annotations,
`req_lib.pysa` for educating pysa about Zulip's `REQ()` pattern for
extracting user input, and `redirects.pysa` for capturing the risk
of open redirects within Zulip code. Additionally, this commit
introduces `mark_sanitized`, an identity function which can be used
to selectively clear taint in cases where `Sanitize` models will not
work. This commit also puts `mark_sanitized` to work removing known
false postive flows.
This commit adds 'add_query_to_redirect_url' to one additional
function which had not yet been written when
'add_query_to_redirect_url' was introduced. This helper centralizes
URL manipulation for redirects, making it easier to add Pysa
sanitization in subsequent commits.
This new endpoint returns a 'user' dictionary which, as of now,
contains a single key 'is_subscribed' with a boolean value that
represents whether the user with the given 'user_id' is subscribed
to the stream with the given 'stream_id'.
Fixes#14966.
The only clients that should use the typing
indicators endpoint are our internal clients,
and they should send a JSON-formatted list
of user_ids.
We now enforce this, which removes some
complexity surrounding legacy ways of sending
users, such as emails and comma-delimited
strings of user_ids.
There may be a very tiny number of mobile
clients that still use the old emails API.
This won't have any user-facing effect on
the mobile users themselves, but if you type
a message to your friend on an old mobile
app, the friend will no longer see typing
indicators.
Also, the mobile team may see some errors
in their Sentry logs from the server rejecting
posts from the old mobile clients.
The error messages we report here are a bit
more generic, since we now just use REQ
to do validation with this code:
validator=check_list(check_int)
This also allows us to remove a test hack
related to the API documentation. (We changed
the docs to reflect the modern API in an
earlier commit, but the tests couldn't be
fixed while we still had the more complex
semantics for the "to" parameter.)
Tim Abbott
sahil839
Hashir Sarwar
Anders Kaseorg
Mateusz Mandera
Aman Agrawal
Hemanth V. Alluri
arpit551
Dinesh
orientor
Steve Howell
Anders Kaseorg
Graham Bleaney
Kartik Srivastava
Steve Howell