It seems like orange is the loudest possible color to
denote a quasi-neutral-idle state, so we hope to
replace it with another color.
This commit does not change any styling.
I removed the sentences in the doc, since they are
kind of too vague to be useful. If we want to say that
the idle state is correlated with the half-orange
circles in the buddy list, then we want to say that
more specifically.
The node test was slightly inaccurate.
I added `# etc.` to try to make it clear that
these are just examples.
I removed the puppeteer example, so that we
don't lie about "run in just a few seconds".
Renames `/docs/documentation/user.md` to reflect the rebranding
from "user documentation" to "help center documentation".
Also, fixes any linking in the docs to that file.
Updates the tutorial for writing help center articles to encourage
contributors to add to or enhance the existing help center docs
before writing a new articles for new features.
Also, generally updates references to 'user documentation' to be
'help center documentation'.
Additionally, updates some headers within the tutorials for clarity
and consistency, and adds some linkifying throughout the section on
writing documentation.
The RabbitMQ docs state ([1]):
RabbitMQ nodes and CLI tools (e.g. rabbitmqctl) use a cookie to
determine whether they are allowed to communicate with each
other. [...] The cookie is just a string of alphanumeric
characters up to 255 characters in size. It is usually stored in a
local file.
...and goes on to state (emphasis ours):
If the file does not exist, Erlang VM will try to create one with
a randomly generated value when the RabbitMQ server starts
up. Using such generated cookie files are **appropriate in
development environments only.**
The auto-generated cookie does not use cryptographic sources of
randomness, and generates 20 characters of `[A-Z]`. Because of a
semi-predictable seed, the entropy of this password is thus less than
the idealized 26^20 = 94 bits of entropy; in actuality, it is 36 bits
of entropy, or potentially as low as 20 if the performance of the
server is known.
These sizes are well within the scope of remote brute-force attacks.
On provision, install, and upgrade, replace the default insecure
20-character Erlang cookie with a cryptographically secure
255-character string (the max length allowed).
[1] https://www.rabbitmq.com/clustering.html#erlang-cookie
Zulip writes a `rabbitmq.config` configuration file which locks down
RabbitMQ to listen only on localhost:5672, as well as the RabbitMQ
distribution port, on localhost:25672.
The "distribution port" is part of Erlang's clustering configuration;
while it is documented that the protocol is fundamentally
insecure ([1], [2]) and can result in remote arbitrary execution of
code, by default the RabbitMQ configuration on Debian and Ubuntu
leaves it publicly accessible, with weak credentials.
The configuration file that Zulip writes, while effective, is only
written _after_ the package has been installed and the service
started, which leaves the port exposed until RabbitMQ or system
restart.
Ensure that rabbitmq's `/etc/rabbitmq/rabbitmq.config` is written
before rabbitmq is installed or starts, and that changes to that file
trigger a restart of the service, such that the ports are only ever
bound to localhost. This does not mitigate existing installs, since
it does not force a rabbitmq restart.
[1] https://www.erlang.org/doc/apps/erts/erl_dist_protocol.html
[2] https://www.erlang.org/doc/reference_manual/distributed.html#distributed-erlang-system
This is required in order to lock down the RabbitMQ port to only
listen on localhost. If the nodename is `rabbit@hostname`, in most
circumstances the hostname will resolve to an external IP, which the
rabbitmq port will not be bound to.
Installs which used `rabbit@hostname`, due to RabbitMQ having been
installed before Zulip, would not have functioned if the host or
RabbitMQ service was restarted, as the localhost restrictions in the
RabbitMQ configuration would have made rabbitmqctl (and Zulip cron
jobs that call it) unable to find the rabbitmq server.
The previous commit ensures that configure-rabbitmq is re-run after
the nodename has changed. However, rabbitmq needs to be stopped
before `rabbitmq-env.conf` is changed; we use an `onlyif` on an `exec`
to print the warning about the node change, and let the subsequent
config change and notify of the service and configure-rabbitmq to
complete the re-configuration.
The Erlang `epmd` daemon listens on port 4369, and provides
information (without authentication) about which Erlang processes are
listening on what ports. This information is not itself a
vulnerability, but may provide information for remote attackers about
what local Erlang services (such as `rabbitmq-server`) are running,
and where.
`epmd` supports an `ERL_EPMD_ADDRESS` environment variable to limit
which interfaces it binds on. While this environment variable is set
in `/etc/default/rabbitmq-server`, Zulip unfortunately attempts to
start `epmd` using an explicit `exec` block, which ignores those
settings.
Regardless, this lack of `ERL_EPMD_ADDRESS` variable only controls
`epmd`'s startup upon first installation. Upon reboot, there are two
ways in which `epmd` might be started, neither of which respect
`ERL_EPMD_ADDRESS`:
- On Focal, an `epmd` service exists and is activated, which uses
systemd's configuration to choose which interfaces to bind on, and
thus `ERL_EPMD_ADDRESS` is irrelevant.
- On Bionic (and Focal, due to a broken dependency from
`rabbitmq-server` to `epmd@` instead of `epmd`, which may lead to
the explicit `epmd` service losing a race), `epmd` is started by
`rabbitmq-server` when it does not detect a running instance.
Unfortunately, only `/etc/init.d/rabbitmq-server` would respects
`/etc/default/rabbitmq-server` -- and it defers the actual startup
to using systemd, which does not pass the environment variable
down. Thus, `ERL_EPMD_ADDRESS` is also irrelevant here.
We unfortunately cannot limit `epmd` to only listening on localhost,
due to a number of overlapping bugs and limitations:
- Manually starting `epmd` with `-address 127.0.0.1` silently fails
to start on hosts with IPv6 disabled, due to an Erlang bug ([1],
[2]).
- The dependencies of the systemd `rabbitmq-server` service can be
fixed to include the `epmd` service, and systemd can be made to
bind to `127.0.0.1:4369` and pass that socket to `epmd`, bypassing
the above bug. However, the startup of this service is not
guaranteed, because it races with other sources of `epmd` (see
below).
- Any process that runs `rabbitmqctl` results in `epmd` being started
if one is not currently running; these instances do not respect any
environment variables as to which addresses to bind on. This is
also triggered by `service rabbitmq-server status`, as well as
various Zulip cron jobs which inspect the rabbitmq queues. As
such, it is difficult-to-impossible to ensure that some other
`epmd` process will not win the race and open the port on all
interfaces.
Since the only known exposure from leaving port 4369 open is
information that rabbitmq is running on the host, and the complexity
of adjusting this to only bind on localhost is high, we remove the
setting which does not address the problem, and document that the port
is left open, and should be protected via system-level or
network-level firewalls.
[1]: https://bugs.launchpad.net/ubuntu/+source/erlang/+bug/1374109
[2]: https://github.com/erlang/otp/issues/4820
As a consequence:
• Bump minimum supported Python version to 3.7.
• Move Vagrant environment to Debian 10, which has Python 3.7.
• Move CI frontend tests to Debian 10.
• Move production build test to Debian 10.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
With tweaks to security-model.md by tabbott to expand the SSO acronym.
Ignored, but still needs discussion on whether we should exclude this
rule:
```
The word ‘install’ is not a noun.
✗ ...ble to connect to the client during the install process: So you'll need to shut down a...
^^^^^^^
✓ ...ble to connect to the client during the installation process: So you'll need to shut down a...
A_INSTALL: a/the + install
The word ‘install’ is not a noun.
✗ ...detected at install time will cause the install to abort. If you already have PostgreSQ...
^^^^^^^
✓ ...detected at install time will cause the installation to abort. If you already have PostgreSQ...
A_INSTALL: a/the + install
```
This page contains a lot of other material related to GSoC than
just project ideas.
We would also want to add a redirect from the old URL to the new
one from the RTD admin page.
Because Camo includes logic to deny access to private subnets, routing
its requests through Smokescreen is generally not necessary. However,
it may be necessary if Zulip has configured a non-Smokescreen exit
proxy.
Default Camo to using the proxy only if it is not Smokescreen, with a
new `proxy.enable_for_camo` setting to override this behaviour if need
be. Note that that setting is in `zulip.conf` on the host with Camo
installed -- not the Zulip frontend host, if they are different.
Fixes: #20550.
For `no_serve_uploads`, `http_only`, which previously specified
"non-empty" to enable, this tightens what values are true. For
`pgroonga` and `queue_workers_multiprocess`, this broadens the
possible values from `enabled`, and `true` respectively.
Restarting the uwsgi processes by way of supervisor opens a window
during which nginx 502's all responses. uwsgi has a configuration
called "chain reloading" which allows for rolling restart of the uwsgi
processes, such that only one process at once in unavailable; see
uwsgi documentation ([1]).
The tradeoff is that this requires that the uwsgi processes load the
libraries after forking, rather than before ("lazy apps"); in theory
this can lead to larger memory footprints, since they are not shared.
In practice, as Django defers much of the loading, this is not as much
of an issue. In a very basic test of memory consumption (measured by
total memory - free - caches - buffers; 6 uwsgi workers), both
immediately after restarting Django, and after requesting `/` 60 times
with 6 concurrent requests:
| Non-lazy | Lazy app | Difference
------------------+------------+------------+-------------
Fresh | 2,827,216 | 2,870,480 | +43,264
After 60 requests | 3,332,284 | 3,409,608 | +77,324
..................|............|............|.............
Difference | +505,068 | +539,128 | +34,060
That is, "lazy app" loading increased the footprint pre-requests by
43MB, and after 60 requests grew the memory footprint by 539MB, as
opposed to non-lazy loading, which grew it by 505MB. Using wsgi "lazy
app" loading does increase the memory footprint, but not by a large
percentage.
The other effect is that processes may be served by either old or new
code during the restart window. This may cause transient failures
when new frontend code talks to old backend code.
Enable chain-reloading during graceful, puppetless restarts, but only
if enabled via a zulip.conf configuration flag.
Fixes#2559.
[1]: https://uwsgi-docs.readthedocs.io/en/latest/articles/TheArtOfGracefulReloading.html#chain-reloading-lazy-apps
Palash
Tim Abbott
Anders Kaseorg
jai2201
Alex Vandiver
Alya Abbott
Lauryn Menard
Steve Howell
Raghav Luthra
Eeshan Garg
rht
Alya Abbott
Abhijeet Prasad Bodas
Rishabh-792
BIKI DAS