Failing to remove all of the rules which were added causes action at a
distance with other tests. The two methods were also only used by
test code, making their existence in zerver.lib.rate_limiter clearly
misplaced.
This fixes one instance of a mis-balanced add/remove, which caused
tests to start failing if run non-parallel and one more anonymous
request was added within a rate-limit-enabled block.
As the relevant comment elaborates - what happens next in the test in
simulating the step that happens in the desktop app. Thus a new session
needs to be used. Otherwise, the old session created normally in the
browser pollutes the state and can give falsely passing tests.
This should be happening for all social auth tests using this, not just
in that one SAML test, thus moving it inside the helper method.
This is a useful improvement in general for making correct
LogoutRequests to Idps and a necessary one to make SP-initiated logout
fully work properly in the desktop application. During desktop auth
flow, the user goes through the browser, where they log in through their
IdP. This gives them a logged in browser session at the IdP. However,
SAML SP-initiated logout is fully conducted within the desktop
application. This means that proper information needs to be given to the
the IdP in the LogoutRequest to let it associate the LogoutRequest with
that logged in session that was established in the browser. SessionIndex
is exactly the tool for that in the SAML spec.
This gives more flexibility on a server with multiple organizations and
SAML IdPs. Such a server can have some organizations handled by IdPs
with SLO set up, and some without it set up. In such a scenario, having
a generic True/False server-wide setting is insufficient and instead
being able to specify the IdPs/orgs for SLO is needed.
Closes#20084
This is the flow that this implements:
1. A logged-in user clicks "Logout".
2. If they didn't auth via SAML, just do normal logout. Otherwise:
3. Form a LogoutRequest and redirect the user to
https://idp.example.com/slo-endpoint?SAMLRequest=<LogoutRequest here>
4. The IdP validates the LogoutRequest, terminates its own user session
and redirects the user to
https://thezuliporg.example.com/complete/saml/?SAMLRequest=<LogoutResponse>
with the appropriate LogoutResponse. In case of failure, the
LogoutResponse is expected to express that.
5. Zulip validates the LogoutResponse and if the response is a success
response, it executes the regular Zulip logout and the full flow is
finished.
Previously, entering an organization via 'accounts/go' with the
web-public stream enabled took the user to the web-public view
even if the user was not logged in.
Now, a user is always redirected to the 'login_page' with
the next parameter, if present.
The 'login_page' view is updated to redirect an authenticated
user based on the 'next' parameter instead of always redirecting
to 'realm.uri'.
Fixes#23344.
So far, we've used the BitField .authentication_methods on Realm
for tracking which backends are enabled for an organization. This
however made it a pain to add new backends (requiring altering the
column and a migration - particularly troublesome if someone wanted to
create their own custom auth backend for their server).
Instead this will be tracked through the existence of the appropriate
rows in the RealmAuthenticationMethods table.
Adds the user ID to the return values for the `/fetch_api_key` and
`/dev_fetch_api_key` endpoints. This saves clients like mobile a
round trip to the server to get the user's unique ID as it is now
returned as part of the log in flow.
Fixes#24980.
In previous commits, we updated the realm creation flow to show
the realm name, type and subdomain fields in the first form
when asking for the email of the user. This commit updates the
user registration form to show the already filled realm details
as non-editable text and there is also a button to edit the
realm details before registration.
We also update the sub-heading for user registration form as
mentioned in the issue.
Fixes part of #24307.
This commits update the code to use user-level email_address_visibility
setting instead of realm-level to set or update the value of UserProfile.email
field and to send the emails to clients.
Major changes are -
- UserProfile.email field is set while creating the user according to
RealmUserDefault.email_address_visbility.
- UserProfile.email field is updated according to change in the setting.
- 'email_address_visibility' is added to person objects in user add event
and in avatar change event.
- client_gravatar can be different for different users when computing
avatar_url for messages and user objects since email available to clients
is dependent on user-level setting.
- For bots, email_address_visibility is set to EVERYONE while creating
them irrespective of realm-default value.
- Test changes are basically setting user-level setting instead of realm
setting and modifying the checks accordingly.
This adds a new endpoint /jwt/fetch_api_key that accepts a JWT and can
be used to fetch API keys for a certain user. The target realm is
inferred from the request and the user email is part of the JWT.
A JSON containing an user API key, delivery email and (optionally)
raw user profile data is returned in response.
The profile data in the response is optional and can be retrieved by
setting the POST param "include_profile" to "true" (default=false).
Co-authored-by: Mateusz Mandera <mateusz.mandera@zulip.com>
This will be useful for re-use for implementation of an endpoint for
obtaining the API by submitting a JWT in the next commits.
It's not a pure refactor, as it requires some tweaks to remote_user_jwt
behavior:
1. The expected format of the request is changed a bit. It used to
expect "user" and "realm" keys, from which the intended email was
just generated by joining with @. Now it just expects "email"
straight-up. The prior design was a bt strange to begin with, so this
might be an improvement actually.
2. In the case of the codepath of new user signup, this will no longer
pre-populate the Full Name in the registration form with the value
from the "user" key. This should be a very minor lost of
functionality, because the "user" value was not going to be a proper
Full Name anyway. This functionality can be restored in a future
commit if desired.
This is an API change, but this endpoint is nearly unused as far as
we're aware.
Black 23 enforces some slightly more specific rules about empty line
counts and redundant parenthesis removal, but the result is still
compatible with Black 22.
(This does not actually upgrade our Python environment to Black 23
yet.)
Signed-off-by: Anders Kaseorg <anders@zulip.com>
There was the following bug here:
1. Send an email invite to a user.
2. Have the user sign up via social auth without going through that
invite, meaning either going via a multiuse invite link or just
straight-up Sign up if the org permissions allow.
That resulted in the PreregistrationUser that got generated in step (1)
having 2 Confirmations tied to it - because maybe_send_to_registration
grabbed the object and created a new confirmation link for it. That is a
corrupted state, Confirmation is supposed to be unique.
One could try to do fancy things with checking whether a
PreregistrationUser already have a Confirmation link, but to avoid races
between ConfirmationEmailWorker and maybe_send_to_registration, this
would require taking locks and so on - which gets needlessly
complicated. It's simpler to not have them compete for the same object.
The point of the PreregistrationUser re-use in
maybe_send_to_registration is that if an admin invites a user, setting
their initial streams and role, it'd be an annoying experience if the
user ends up signing up not via the invite and those initial streams
streams etc. don't get set up. But to handle this, we can just copy the
relevant values from the pre-existing prereg_user, rather than re-using
the object itself.
So that we can stop using Tim's photo for tests, adds an open
license profile picture to use instead.
Updates tests that used `tim.png` to use the new example profile
picture, which is located in `static/images/test-images/avatars/`.
SOCIAL_AUTH_GITHUB_TEAM_ID is expected to be the string of an integer.
The requests mock for the bogus /None URL is unused because the
function that would request it is itself mocked.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Now that we can assume Python 3.6+, we can use the
email.headerregistry module to replace hacky manual email address
parsing.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
This was added in d43b031a32 and was
unused when it was added. This is an error that we want to remove.
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
Fixes#21266.
We want to tie the prereg_user to the MultiUseInvite directly rather
than to the MultiUserInvite's confirmation object, because the latter is
not possible. This is because the flow is that after going through the
multiuse invite link, the PreregistrationUser is created together with a
Confirmation object, creating a confirmation link (via
create_confirmation_link) to which then the user is redirected to finish
account creation. This means that the PreregistrationUser is already
tied to a Confirmation, so that attribute is occupied.
`m.output` is a `list` of `str`s. It does not make sense comparing it to
a `str`. Guessed the intention here is to use `self.assert_length`.
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
This is a prep commit for tightening the types for our wrapped test
client.
The callers of the test client methods are refactored to either call
them without unpacking at all or create a TypedDict for the keyword
arguments to be unpacked. This allows the type checker to know exactly what
keys are present and their corresponding type.
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
Since `HttpResponse` is an inaccurate representation of the
monkey-patched response object returned by the Django test client, we
replace it with `_MonkeyPatchedWSGIResponse` as `TestHttpResponse`.
This replaces `HttpResponse` in zerver/tests, analytics/tests, coporate/tests,
zerver/lib/test_classes.py, and zerver/lib/test_helpers.py with
`TestHttpResponse`. Several files in zerver/tests are excluded
from this substitution.
This commit is auto-generated by a script, with manual adjustments on certain
files squashed into it.
This is a part of the django-stubs refactorings.
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
Add none-checks, rename variables (to avoid redefinition of
the same variable with different types error), add necessary
type annotations.
This is a part of #18777.
Signed-off-by: Zixuan James Li <359101898@qq.com>
This commit changes the invite API to accept invitation
expiration time in minutes since we are going to add a
custom option in further commits which would allow a user
to set expiration time in minutes, hours and weeks as well.
Alex Vandiver
Anders Kaseorg
Mateusz Mandera
Prakhar Pratyush
AcKindle3
Lauryn Menard
Sahil Batra
Alessandro Toppi
Zixuan James Li
Alya Abbott
Zixuan James Li