Since production testing of `message_retention_days` is finished, we can
enable this feature in the organization settings page. We already had this
setting in frontend but it was bit rotten and not rendered in templates.
Here we replaced our past text-input based setting with a
dropdown-with-text-input setting approach which is more consistent with our
existing UI.
Along with frontend changes, we also incorporated a backend change to
handle making retention period forever. This change introduces a new
convertor `to_positive_or_allowed_int` which only allows positive integers
and an allowed value for settings like `message_retention_days` which can
be a positive integer or has the value `Realm.RETAIN_MESSAGE_FOREVER` when
we change the setting to retain message forever.
This change made `to_not_negative_int_or_none` redundant so removed it as
well.
Fixes: #14854
Generated by autopep8, with the setup.cfg configuration from #14532.
I’m not sure why pycodestyle didn’t already flag these.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
Generated by `pyupgrade --py3-plus --keep-percent-format` on all our
Python code except `zthumbor` and `zulip-ec2-configure-interfaces`,
followed by manual indentation fixes.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
The value of start would be set to realm creation date or installation
date unless a value is explicitly provided by the user. We don't
want to show analytics data missing error in both these cases if
start is less than 24.5 hours from timezone_now() since some of the
stats are populated by a daily cron job that may take a couple of
minutes to run.
The same case applies if the value of the start is passed in the
request.
We try to use the correct variation of `email`
or `delivery_email`, even though in some
databases they are the same.
(To find the differences, I temporarily hacked
populate_db to use different values for email
and delivery_email, and reduced email visibility
in the zulip realm to admins only.)
In places where we want the "normal" realm
behavior of showing emails (and having `email`
be the same as `delivery_email`), we use
the new `reset_emails_in_zulip_realm` helper.
A couple random things:
- I fixed any error messages that were leaking
the wrong email
- a test that claimed to rely on the order
of emails no longer does (we sort user_ids
instead)
- we now use user_ids in some place where we used
to use emails
- for IRC mirrors I just punted and used
`reset_emails_in_zulip_realm` in most places
- for MIT-related tests, I didn't fix email
vs. delivery_email unless it was obvious
I also explicitly reset the realm to a "normal"
realm for a couple tests that I frankly just didn't
have the energy to debug. (Also, we do want some
coverage on the normal case, even though it is
"easier" for tests to pass if you mix up `email`
and `delivery_email`.)
In particular, I just reset data for the analytics
and corporate tests.
We now have this API...
If you really just need to log in
and not do anything with the actual
user:
self.login('hamlet')
If you're gonna use the user in the
rest of the test:
hamlet = self.example_user('hamlet')
self.login_user(hamlet)
If you are specifically testing
email/password logins (used only in 4 places):
self.login_by_email(email, password)
And for failures uses this (used twice):
self.assert_login_failure(email)
Replaced unique_together with UniqueConstraint in models that
covered nullable fields as in unique_together database indexes
don't work where subgroup=None. So added conditional unique
index handling invalid duplicate Count data.
Added 0015_clear_duplicate_counts migration to handle existing
data that violates the constraints.
Also corrected a test case in test_counts.py which didn't clear its
state properly and thus was accidentally taking advantage of this
database schema bug.
A few comments are added to explain more clearly the changes made in
b23a5431cd namely about not using realm
arguments in LoggingCount Stats and the need to pass realm argument in
pull function.
The comments were tweaked by tabbott for readability.
This field wasn't used for anything, and I think it has very limited
use for debugging, since fundamentally, it'll almost always have a
value within the hour of the actual timestamp in FillState, and any
more fine-grained logging we might want would be available in the
analytics job's own logs.
The proximal reason to remove it is that apparently Django's
model_to_dict doesn't support auto_now fields, and that caused some
trouble when working on adding more complete import/export support for
analytics data.
This changeset is prepartory work for doing something reasonable with
analytics data during the zulip -> zulip data import process (and
potentially e.g. slack -> Zulip as well).
To support that, we need to make it possible to do our analytics
calculations for a single realm.
We do this while maintaining backwards compatibility and avoiding
massive duplicated code by adding an optional `realm` argument to the
entrypoints to the analytics system, especially process_count_stat.
More work involving restructuring FillState will be required for this
to be actually usable for its intented purpose, but this commit is a
nice checkpoint along the way.
Tweaked by tabbott to adjust comments and disable InstallationCount
updates when a realm argument is specified.
This is a preparatory commit for using isort for sorting all of our
imports, merging changes to files where we can easily review the
changes as something we're happy with.
These are also files with relatively little active development, which
means we don't expect much merge conflict risk from these changes.
This is adds foreign keys to the corresponding Recipient object in the
UserProfile on Stream tables, a denormalization intended to improve
performance as this is a common query.
In the migration for setting the field correctly for existing users,
we do a direct SQL query (because Django 1.11 doesn't provide any good
method for doing it properly in bulk using the ORM.).
A consequence of this change to the model is that a bit of code needs
to be added to the functions responsible for creating new users (to
set the field after the Recipient object gets created). Fortunately,
there's only a few code paths for doing that.
Also an adjustment is needed in the import system - this introduces a
circular relation between Recipient and UserProfile. The field cannot be
set until the Recipient objects have been created, but UserProfiles need
to be created before their corresponding Recipients. We deal with this
by first importing UserProfiles same way as before, but we leave the
personal_recipient field uninitialized. After creating the Recipient
objects, we call a function to set the field for all the imported users
in bulk.
A similar change is made for managing Stream objects.
We currently have code to calculate the value of realm_icon_url,
admin_emails and default_discount in two diffrent places. With
the addition of showing confirmation links it would become three.
The easiest way to deduplicate the code and make the view cleaner
is by doing the calculations in template. Alternatively one can
write a function that takes users, realms and confirmations as
arguments and sets the value of realm_icon_url, admin_emails and
default_discount appropriately in realm object according to the
type of the confirmation. But that seems more messy than passing
the functions directly to template approach.
MigrationsTestCase is intentionally omitted from this, since migrations
tests are different in their nature and so whatever setUp()
ZulipTestCase may do in the future, MigrationsTestCase may not
necessarily want to replicate.
Fixes#1727.
With the server down, apply migrations 0245 and 0246. 0246 will remove
the pub_date column, so it's essential that the previous migrations
ran correctly to copy data before running this.
This sidesteps tricky escaping issues, and will make it easier to
build a strict Content-Security-Policy.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
Previous cleanups (mostly the removals of Python __future__ imports)
were done in a way that introduced leading newlines. Delete leading
newlines from all files, except static/assets/zulip-emoji/NOTICE,
which is a verbatim copy of the Apache 2.0 license.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
We simply state that certain options are `Optional`.
The following files are affected:
add_users_to_mailing_list
send_to_email_mirror
fill_memcached_caches
client_activity
This function is an alternative to get_admin_users that we use in all
places where we explicitly want only human administrative users (not
administrative bots). The following commits will rename
get_admin_users for better clarity.
This renames Subscription.in_home_view field to is_muted, for greater
clarity as to what it does just from seeing the setting name, without
having to look it up.
Also disabled an obsolete test_migrations test.
Fixes#10042.
This makes the implementation of `get_realm` consistent with its
declared return type of `Realm` rather than `Optional[Realm]`.
Fixes#12263.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
Using sys.exit in a management command makes it impossible
to unit test the code in question. The correct approach to do the same
thing in Django management commands is to raise CommandError.
Followup of b570c0dafa
AssertionErrors were raised when attempting to run manual comparison
tests to ensure correctness when exporting the analytics realm using
export_from_config. This was caused by this populate_analytics_db
stream being created without any subscribers, which violates an
invariant.
We fix this by simply subscribing the 'shylock' user to that stream.
In ebdd55814c, we added zilencer imports
without using the proper mocking procedure for when zilencer is not enabled.
This whole setup is a mess and probably we should enable zilencer
unconditionally in a future version.
This is a major rewrite of the billing system. It moves subscription
information off of stripe Subscriptions and into a local CustomerPlan
table.
To keep this manageable, it leaves several things unimplemented
(downgrading, etc), and a variety of other TODOs in the code. There are also
some known regressions, e.g. error-handling on /upgrade is broken.
A key part of this is the new helper, get_user_by_delivery_email. Its
verbose name is important for clarity; it should help avoid blind
copy-pasting of get_user (which we'll also want to rename).
Unfortunately, it requires detailed understanding of the context to
figure out which one to use; each is used in about half of call sites.
Another important note is that this PR doesn't migrate get_user calls
in the tests except where not doing so would cause the tests to fail.
This probably deserves a follow-up refactor to avoid bugs here.
This deletes the unused Subscription.notifications field and removes
it from some testing and analytics code (which should not have been
using it in the first place).
Fixes#10042.
This fixes a subtle bug where if you reran populate_analytics_db
directly, we'd end up in a weird state where memcached fetched the
"old" pre-flush UserProfile object for shylock when loading /stats,
which ultimately would result in /stats appearing totally broken.
This code is going to end up pretty complex -- each stat has multiple levels
of aggregation (UserCount, RealmCount, InstallationCount), and refinement
(subgroups), and soon we'll have charts that take data from multiple stats
as input.
Not sure what the best way to present it is, but hopefully this simplifies
it a bit.
We use "Everyone" for the button labels already.
Soon we'll support "Everyone" meaning either the installation or the realm,
depending on the URL route used to access the stats.
In this commit:
Two new URLs are added, to make all realms accessible for server
admins. One is for the stats page itself and another for getting
chart data i.e. chart data API requests.
For the above two new URLs corresponding two view functions are
added.
The name `create_logger` suggests something much bigger than what this
function actually does -- the logger doesn't any more or less exist
after the function is called than before. Its one real function is to
send logs to a specific file.
So, pull out that logic to an appropriately-named function just for
it. We already use `logging.getLogger` in a number of places to
simply get a logger by name, and the old `create_logger` callsites can
do the same.
This is already the loglevel we set on the root logger, so this has no
effect -- except in tests, where `test_settings.py` attempts to set
some of these same loggers to higher loglevels. Because the
`create_logger` call generally runs after we've configured settings,
it clobbers that effect.
The code in `test_settings.py` that tries to suppress logs only works
because it also sets `propagate=False`, which has nothing to do with
loglevels but does cause logs at this logger (and descendants) to be
dropped completely unless we've configured handlers for this logger
(or one of its relevant descendants.)
I've wanted this when looking at a tab from the day before.
Also provides the date and time in UTC, which is handy for
interpreting some of the data.
Pretty sure this is not the world's cleanest way to do this in the
front-end code. It'll do for now.
Substantively, this makes the table more readable by grouping users
into expanding sets by level of activity: active in last day, active
in last week, have an account at all. The class "active in last week",
as opposed to "active in last week but not in last day", makes more
natural comparisons both between realms and for one realm through time,
and it's less sensitive to the details of our definitions.
This also makes the terminology more standard. We already made that
change in the display, in the previous commit; as we go through the
logic here, we adjust the terminology in the code too.
Except in:
- docs/writing-bots-guide.md, because bots are supposed to be Python 2
compatible
- puppet/zulip_ops/files/zulip-ec2-configure-interfaces, because this
script is still on python2.7
- tools/lint
- tools/linter_lib
- tools/lister.py
For the latter two, because they might be yanked away to a separate repo
for general use with other FLOSS projects.
Sort of a hacky hammer, but
* The original design of the analytics system mistakenly attempted to play
nicely with non-UTC datetimes.
* Timezone errors are really hard to find and debug, and don't jump out that
easily when reading code.
I don't know of any outstanding errors, but putting a few "assert this
timezone is in UTC" around will hopefully reduce the chance that there are
any current or future timezone errors.
Note that none of these functions are called outside of the analytics code
(and tests). This commit also doesn't change any current behavior, assuming
a database where all datetimes have been being stored in UTC.
Previously, entering a non-UTC end time for a daily stat would give you
incorrect results. This is because:
* All daily stats are collected at and have end_times in the database in
midnight UTC.
* For daily stats, time_range returns a list of datetimes at midnight in the
timezone of its end argument. These datetimes are the only ones we look
for when looking for rows corresponding to the stat in the database.
* Previously, we passed on the end argument from the API to time_range,
without modification.
This consists of the `zulip_ops::stats` Puppet class, which has apparently
not been used since 2014, and a number of files that I believe were
only used for that. Also a couple of tiny loose ends in other files.
These are no longer useful, with our spiffy new analytics framework,
and we haven't in fact been using them for some time, while the
`active-user-stats` cron job does cause regular mail from cron.
Just delete them.
sort_client_labels sorts first by total, and then to ensure deterministic
outcomes, sorts (reverse) alphabetically by label.
Fixes regression introduced in 0c0e539.
Previously we showed the total number of users with an active account. This
changes it to show only the number of users that have logged in in the past
two weeks.
Rename 'zulip_internal' decorator to 'require_server_admin', add
documentation for 'server_admin', explaining how to give permission
for ./activity page.
Fixes: #1463.
Previously we would update FillState for daily stats on hourly boundaries as
well. This would create two extra queries on the FillState table every hour
(for each CountStat), which adds roughly 50ms of extra processing for each
CountStat each day, as well as two extra lines each hour in the analytics
log. This can be a minor annoyance when backfilling stats.
I think this is more pythonic?
We could also get rid of LoggingCountStats altogether, since it's now just a
special case of CountStat (is_logging == data_collector.pull_function is None).
But I think it's nice to keep the distinction since they behave so differently.
Removes the circular dependency of CountStat containing a DataCollector, and
DataCollector containing a function that takes a CountStat as an argument.
This will allow us to appropriately generalize CountStat to include
LoggingCountStat and CustomPullCountStat. It'll also make life easier when
we introduce DependentCountStat.
The previous zerver_* names were unwieldy and not very readable. This also
puts more of the useful information in one place; in particular, makes it
easier to skim a CountStat declaration and see if we're collecting it at a
user/stream granularity or a realm granularity.
sahil839
Anders Kaseorg
Pragati Agrawal
Tim Abbott
Anders Kaseorg
Vishnu KS
Steve Howell
Mateusz Mandera
arpit551
Rishi Gupta
Wyatt Hoodes
Mohit Gupta
Roman Godov
Harshit Bansal
bartek
Anders Kaseorg
ss62171
Yashashvi Dave
Eeshan Garg
Nikhil Kumar Mishra
Yago González
Aditya Bansal
Shubham Dhama
neiljp (Neil Pilgrim)
Archana BS
Aman Jain
rht
Greg Price
derAnfaenger
Umair Khan
Greg Price
Vishnu Ks
umkay
Christian Hudon
Maxim Averin