This is designed to have no user-facing change unless the client
declares bulk_message_deletion in its client_capabilities.
Clients that do so will receive a single bulk event for bulk deletions
of messages within a single conversation (topic or PM thread).
Backend implementation of #15285.
Fixes#2665.
Regenerated by tabbott with `lint --fix` after a rebase and change in
parameters.
Note from tabbott: In a few cases, this converts technical debt in the
form of unsorted imports into different technical debt in the form of
our largest files having very long, ugly import sequences at the
start. I expect this change will increase pressure for us to split
those files, which isn't a bad thing.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Automatically generated by the following script, based on the output
of lint with flake8-comma:
import re
import sys
last_filename = None
last_row = None
lines = []
for msg in sys.stdin:
m = re.match(
r"\x1b\[35mflake8 \|\x1b\[0m \x1b\[1;31m(.+):(\d+):(\d+): (\w+)", msg
)
if m:
filename, row_str, col_str, err = m.groups()
row, col = int(row_str), int(col_str)
if filename == last_filename:
assert last_row != row
else:
if last_filename is not None:
with open(last_filename, "w") as f:
f.writelines(lines)
with open(filename) as f:
lines = f.readlines()
last_filename = filename
last_row = row
line = lines[row - 1]
if err in ["C812", "C815"]:
lines[row - 1] = line[: col - 1] + "," + line[col - 1 :]
elif err in ["C819"]:
assert line[col - 2] == ","
lines[row - 1] = line[: col - 2] + line[col - 1 :].lstrip(" ")
if last_filename is not None:
with open(last_filename, "w") as f:
f.writelines(lines)
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
Generated by autopep8, with the setup.cfg configuration from #14532.
I’m not sure why pycodestyle didn’t already flag these.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
Generated by `pyupgrade --py3-plus --keep-percent-format` on all our
Python code except `zthumbor` and `zulip-ec2-configure-interfaces`,
followed by manual indentation fixes.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
We use retry_event in queue_processors.py to handle trying on failures,
without getting stuck in permanent retry loops if the event ends up
leading to failure on every attempt and we just keep sending NACK to
rabbitmq forever (or until the channel crashes). Tornado queues haven't
been using this, but they should.
The change in 180d8abed6, while correct
for the Django part of the codebase, had the nasty side effect of
exposing a failure mode in the process_notification logic if the users
list was empty.
This, in turn, could cause our process_notification code to fail with
an IndexError when trying to process the event, which would result in
that tornado process not automatically recovering, due to the outer
try/except handler for consume triggering a NACK and thus repeating
the event.
When more than one outgoing webhook is configured,
the message which is send to the webhook bot passes
through finalize_payload function multiple times,
which mutated the message dict in a way that many keys
were lost from the dict obj.
This commit fixes that problem by having
`finalize_payload` return a shallow copy of the
incoming dict, instead of mutating it. We still
mutate dicts inside of `post_process_dicts`, though,
for performance reasons.
This was slightly modified by @showell to fix the
`test_both_codepaths` test that was added concurrently
to this work. (I used a slightly verbose style in the
tests to emphasize the transformation from `wide_dict`
to `narrow_dict`.)
I also removed a deepcopy call inside
`get_client_payload`, since we now no longer mutate
in `finalize_payload`.
Finally, I added some comments here and there.
For testing, I mostly protect against the root
cause of the bug happening again, by adding a line
to make sure that `sender_realm_id` does not get
wiped out from the "wide" dictionary.
A better test would exercise the actual code that
exposed the bug here by sending a message to a bot
with two or more services attached to it. I will
do that in a future commit.
Fixes#14384
If we have an old event that's missing the field
`sender_delivery_email`, we now patch it at the top
of `process_message_event`, rather than for each call
to `get_client_payload`. This will make an upcoming
commit a bit easier to reason about. Basically, it's
simpler to shim the incoming event one time rather
than doing it up to four times. We know that
`get_client_payload` is non-destructive, because it
does a deepcopy.
In e3ad9baf1d, we introduced yet another
bug where we incorrectly shared event dictionaries between multiple
queues.
Fortunately, the logging that reports on "event was not in the queue"
issues worked and detected this on chat.zulip.org, but this is a clear
indication that the comments we have around this system were not
sufficient to produce correct behavior.
We fix this by changing event_queue.push, the code that mutates the
event dictionaries, to do the shallow copies itself. The only
downside here is process_message_event, a relatively low-traffic code
path, does an extra per-queue dictionary copy. Given that presence,
heartbeat, and message reading events are likely more traffic and
dealing with HTTP is likely much more expensive than a dictionary
copy, this probably doesn't matter performance-wise.
(And if profiling later finds it is, there are potential workarounds
like passing a skip_copy argument we can do).
This flag affects page_params and the
payload you get back from POSTs to this
url:
users/me/presence
The flag does not yet affect the
presence events that get sent to a
client.
This change makes it possible for users to control the notification
settings for wildcard mentions as a separate control from PMs and
direct @-mentions.
Since years ago, this field hasn't been used for anything other than
some logging that would be better off logging the user ID anyway.
It existed in the first place simply because we weren't passing the
user_profile_id to Tornado at all.
Historically, Zulip's implementation of wildcard mentions never
triggered either email or push notifications, instead being limited to
desktop notifications and the "mentions" counter.
We fix this just by plumbing the "wildcard_mentioned" flag through our
system.
Implements much of
https://github.com/zulip/zulip/issues/6040#issuecomment-510157264.
We're also now ready to seriously work on #3750.
Apparently, our edit-message events did not guarantee that the outer
wrapper dictionary, which is intended to be unique for each client,
was unique for every client (instead only ensuring it was unique for
each user).
This led to clients unexpectedly getting last_event_id validation
errors in this code path when a user had multiple connected clients,
because the linear ordering of event IDs within a given queue was
corrupted.
In fd2a63b049, we accidentally fixed
this issue with a different set of userdata events, without fixing the
edit-message event bug. This commit fixes the remaining issue.
Apparently, our edit-message events did not guarantee that the outer
wrapper dictionary, which is intended to be unique for each client,
was unique for every client (instead only ensuring it was unique for
each user).
This led to clients unexpectedly getting last_event_id validation
errors in this code path when a user had multiple connected clients,
because the linear ordering of event IDs within a given queue was
corrupted.
This gives us access to typing_extensions.Deque, which was not added
to typing until 3.5.4.
(PROVISION_VERSION is not bumped because the transitive dependency set
in dev.txt hasn’t changed.)
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
This verifies that the client passed a last_event_id that actually
came from the queue instead of making up an ID from the future. It
turns out one of our tests was making up such an ID, but legitimate
clients are expected not to do so.
The previous version of this commit (commit
e00d4be6d5, #12888) had to be reverted
(commit b86c5cc490) because it was
missing the `to_dict`/`from_dict` migration code.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
We were apparently not running our own forked Tornado autoreload
library when adding reload hooks, which meant that our autoreload
hooks didn't run at all.
This fixes an issue that made dump_event_queues never run and thus the
local development environment difficult to use for testing event queues.
This verifies that the client passed a last_event_id that actually
came from the queue instead of making up an ID from the future. It
turns out one of our tests was making up such an ID, but legitimate
clients are expected not to do so.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
This makes it more convenient for developers to set very short values
for this (e.g. 1 minute) for the purposes of testing/debugging; there
aren't obvious problems with letting users set short values for this.
This is a preparator refactor for supporting hosting different Tornado
processes on different servers; to look up which Tornado server we
should be sending the event to, we'll need the realm object.
This should make it possible for there to safely be multiple Tornado
processes running on different ports on the same system.
It may also fix a rare race bug in development, where previously, it
was possible for the Tornados processes for Casper and the main
development server to interfere; I haven't investigated whether this
was a real bug or not, but now those two services will use independent
Tornado files.
We still need to add something to direct traffic between the different
Tornado processes.
Anders Kaseorg
Aman Agrawal
Anders Kaseorg
Mateusz Mandera
Tim Abbott
Udit107710
Steve Howell
Anders Kaseorg