There are three functional side effects:
• Correct an insignificant but mathematically offensive bias toward
repeated characters in generate_api_key introduced in commit
47b4283c4b4c70ecde4d3c8de871c90ee2506d87; its entropy is increased
from 190.52864 bits to 190.53428 bits.
• Use the base32 alphabet in confirmation.models.generate_key; its
entropy is reduced from 124.07820 bits to the documented 120 bits, but
now it uses 1 syscall instead of 24.
• Use the base32 alphabet in get_bigbluebutton_url; its entropy is
reduced from 51.69925 bits to 50 bits, but now it uses 1 syscall
instead of 10.
(The base32 alphabet is A-Z 2-7. We could probably replace all of
these with plain secrets.token_urlsafe, since I expect most callers
can handle the full urlsafe_b64 alphabet A-Z a-z 0-9 - _ without
problems.)
Signed-off-by: Anders Kaseorg <anders@zulip.com>
There is still some miscellaneous cleanup that
has to happen for things like analytics queries
and dead code in node tests, but this should
remove the main use of pointers in the backend.
(We will also still need to drop the DB field.)
In 5200598a31, we introduced a new
client capability that can be used to avoid unreasonable network
bandwidth consumed sending avatar URLs of long term idle users in
organizations with 10,000s members.
This commit enables this feature and adds support for it to the web
client.
With this implementation of the feature of the automatic theme
detection, we make the following changes in the backend, frontend and
documentation.
This replaces the previous night_mode boolean with an enum, with the
default value being to use the prefers-color-scheme feature of the
operating system to determine which theme to use.
Fixes: #14451.
Co-authored-by: @kPerikou <44238834+kPerikou@users.noreply.github.com>
Fixes#15285
This event will be used more now for guest users when moving
topic between streams (See #15277). So, instead of deleting
messages in the topic as part of different events which is
very slow and a bad UX, we now handle the messages to delete in
bulk which is a much better UX.
This is designed to have no user-facing change unless the client
declares bulk_message_deletion in its client_capabilities.
Clients that do so will receive a single bulk event for bulk deletions
of messages within a single conversation (topic or PM thread).
Backend implementation of #15285.
Fixes#2665.
Regenerated by tabbott with `lint --fix` after a rebase and change in
parameters.
Note from tabbott: In a few cases, this converts technical debt in the
form of unsorted imports into different technical debt in the form of
our largest files having very long, ugly import sequences at the
start. I expect this change will increase pressure for us to split
those files, which isn't a bad thing.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Automatically generated by the following script, based on the output
of lint with flake8-comma:
import re
import sys
last_filename = None
last_row = None
lines = []
for msg in sys.stdin:
m = re.match(
r"\x1b\[35mflake8 \|\x1b\[0m \x1b\[1;31m(.+):(\d+):(\d+): (\w+)", msg
)
if m:
filename, row_str, col_str, err = m.groups()
row, col = int(row_str), int(col_str)
if filename == last_filename:
assert last_row != row
else:
if last_filename is not None:
with open(last_filename, "w") as f:
f.writelines(lines)
with open(filename) as f:
lines = f.readlines()
last_filename = filename
last_row = row
line = lines[row - 1]
if err in ["C812", "C815"]:
lines[row - 1] = line[: col - 1] + "," + line[col - 1 :]
elif err in ["C819"]:
assert line[col - 2] == ","
lines[row - 1] = line[: col - 2] + line[col - 1 :].lstrip(" ")
if last_filename is not None:
with open(last_filename, "w") as f:
f.writelines(lines)
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
This was implemented in 2012 to avoid showing a loading indicator for
fetching messages for users with no message history. However, the
Zulip onboarding UI always creates some message history, and fetching
history is fast, so this is likely clutter more than a useful
optimization.
The pointer doesn't get updated when a user is only reading messages in
narrowed views. But, we use the pointer position to determine the
furthest read time, which causes the bankruptcy banner to show up even
for users who have been actively reading and sending messages.
This commit switches to using the time of the last update_message_flags
activity by a user to determine the time of last activity.
This page isn't polished properly and I'm not sure it's the best
decision tree here, but it's definitely better to have this page than
not, and we can always adjust forward.
Fixes#10033.
This reverts commit 8f32db81a1.
This change unfortunately requires an index that we don't have, and
thus is incredibly expensive. We'll need to do a thoughtful reworking
before we can integrate it again.
When a user is reading messages only in stream or topic narrows, the pointer
can be left far behind. Using this to compute the furthest_read_time causes
the banckruptcy banner to be shown even when a user has been actively
reading messages. This commit switches to using the sent time on the last
message that the user has read to compute the furthest read time.
Internet Explorer does not support `position: sticky` which improves
floating recipient bar behavior during scrolling which is one of the
issues blocking PR #9910.
IE also does not support some features that modern browsers support
hence may not super well.
This commit adds an error page that'll be displayed when a user logs
in from Internet Explorer. Also, a test is added.
This allows us to block use of the desktop app with insecure versions
(we simply fail to load the Zulip webapp at all, instead rendering an
error page).
For now we block only versions that are known to be both insecure and
not auto-updating, but we can easily adjust these parameters in the
future.
Users who are using ZulipDesktop or haven't managed to auto-update to
ZulipElectron should be strongly encouraged to upgrade.
We'll likely want to move to something even stricter that blocks
loading the app at all, but this is a good start.
This gives them cache-compatible URLs, and also avoids some extra
copies of the sprite sheet images.
Comments on the Octopus emoji added by tabbott.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
This flag affects page_params and the
payload you get back from POSTs to this
url:
users/me/presence
The flag does not yet affect the
presence events that get sent to a
client.
In Django 2.0, request.user.is_authenticated stops supporting
`.is_authenticated()` and becomes just a property. In 1.11, it's a
CallableProperty (i.e. can be used either way), and we already use it
as a property in several other places, so we should just switch to
using it consistently now to get it off of our Django 2.x migration
checklist.
This extracts a function for computing show_invites and
show_add_streams, for better readability and testability.
This commit was substantially cleaned up by tabbott.
This legacy cross-realm bot hasn't been used in several years, as far
as I know. If we wanted to re-introduce it, I'd want to implement it
as an embedded bot using those common APIs, rather than the totally
custom hacky code used for it that involves unnecessary queue workers
and similar details.
Fixes#13533.
Anders Kaseorg
Steve Howell
Vishnu KS
Hashir Sarwar
Tim Abbott
MariaGkoulta
Aman Agrawal
sahil839
Anders Kaseorg
Tim Abbott
Puneeth Chaganti
Aman Agrawal
Dinesh
Mateusz Mandera
Steve Howell
Abhishek-Balaji