The arrows were too close to the scrollbars that it would be
difficult to click them sometimes. This moves over the arrows and
unread counts to combat the issue.
Notifications essentially don't work on any mobile web clients,
so don't even show the banner.
This also fixes a traceback where it checks the permission state
with `notifications.permission_state()`, which calls
`Notification.permission`, which will error due to `Notification`
not existing on mobile devices.
Fixes: #7105.
This reverts commit f04981513b.
We're not sure, but we suspect that this made Zulip not show es for
folks using es_es as their locale. Further testing is required.
This presents multiple states for the subdomain input option
depending on the existence of a root domain.
Commit modified heavily by Brock Whittaker <brock@zulipchat.com>.
Fixes#6863.
This removes a test for "webkit" in the userAgent string in order
to see whether notifications should be displayed. This is so that
the notifications process will work correctly in Firefox and not
keep registering as "false" which makes the notifications prompt
continue to re-show itself.
This checks whether the user is already in the state of having
blocked notifications, so that we can *not* show them the banner
to enable notifications, since browsers won't allow the request
to go through again.
Perhaps in a follow up we should create a different banner for
this case that shows how to enable notifications at the browser
level for this site.
This makes them responsive to resizes and fixes a responsive
issue with the floating recipient being too high when the alerts
were more than one line height.
This is a two-step notifications process that will ask a user
to enable notifications and if they click exit give them three
options:
1. Enable notifications.
2. Ask later.
3. Never ask on this computer again.
The first two are self-explanatory (ask later = next session it
asks again). The third is captured and stored in localStorage and
a check is done on page load to see whether or not notifications
should be displayed.
Commit modified heavily by Brock Whittaker <brock@zulipchat.com>.
Fixes#1189.
The left and right sidebar are now equidistant from the edges of the
center pane, and the contents within have equal margin from the edges
of their containers (5px).
The group PM unread counts were pushed over toward the edge of the
screen which made them unaligned with the user unread PMs directly
above.
Fixes: #7064.
This lowers the amount of margin in the :before hack that we use
to put padding before anchored elements from 40px to 30px on <h1>
tags and 10px on everything else, which seems to be plenty.
Fixes: #7069.
When re-subscribing by way of the "Subscribe" button in the right
side settings panel, the row will now be marked as active to
highlight that the row is still selected and being looked at.
Fixes: #6955.
We were getting several exceptions in mark_subscribed if the streams
overlay wasn't open, basically because we'd try to filter the
right-side stream list when it wasn't present in the DOM.
Except in:
- docs/writing-bots-guide.md, because bots are supposed to be Python 2
compatible
- puppet/zulip_ops/files/zulip-ec2-configure-interfaces, because this
script is still on python2.7
- tools/lint
- tools/linter_lib
- tools/lister.py
For the latter two, because they might be yanked away to a separate repo
for general use with other FLOSS projects.
This adds back the perfectScrollbar for the sidebar and markdown
sections because we already lost CTRL-F functionality, so we may
as well bring back the pretty, non-obtrusive scrollbars.
This updates the scrollbar after a successful `slideToggle` of
one of the sidebar sections.
Fixes: #6999.
This changes the behaviour of the typeahead in the compose box to
start appearing with single letter lying in the range of a-z or '+'.
This is a nice solution, because all emoji names start with lower-case
letters, while most emoticons like :P use a capital letter or similar.
Fixes: #6808.
We had been waiting on doing this for a long time to make sure the
feature actually did what it was supposed to (completed last week);
this change adds the typeahead to ensure it actually works.
While we're fixing this, we remove the split between the edit and
compose code paths for typeahead, which is good, because we'd already
accidentally added the syntax-highlighting feature in only one place.
Fixes#195.
We never make an actionable distinction between the "unknown"
presence status and the "offline" status, so we now
just use "offline" as the status for persons who don't
have recent presence records that the client knows about.
(Usually, users without presence rows have never been online,
or they have been deactivated, or they have been offline so long
that they don't show up in our date-limited queries.)
We are about to stop supporting the presence status of "unknown."
Part of this fix is to stop checking for that status.
The implication of this change is that when we go
to display the time a user was last online, we now
mostly just look to see if presence.last_active_date
is undefined. We were wary of that approach before, but it
is probably the most sane approach here.
I updated the comment abover this section to reflect
our philosophy going forward.
BTW the timestamp is kind of buried in the UI for now, as you have to
open the popover and then hover over the circular presence
indicator.
We sometimes get blueslip errors from browsers that are clearly still
attempting to reload long after they should have. These browsers can
produce a lot of unnecessary presence update exceptions.
To solve that, we start checking reload_in_progress in the presence
code path.
While we're at it, we also add some blueslip logging for the reload
code path, in case it becomes useful when debugging future issues.
We've had a few reports of users using modern Chrome having problems
where reload.is_in_progress() was true, but the browser was just
sitting there, not having reloaded.
This will continually attempt to reload the page periodically try and
compensate for the behavior in Chrome where it appears that the tab
has to be active or semi-active for `location.reload` to be respected
when Chrome is trying to save power, which means that it should just
continually try until the page is active again, in which case the
`location.reload` func will work and reload the page.
See https://developers.google.com/web/updates/2017/03/background_tabs
for the Chrome featureset that we believe may be involved with this
issue.
Tweaked by tabbott to reload earlier and add the on-focus handler.
Fixes: #6821.
While applying formatting to drafts if any draft contains some syntax
which our markdown processor is unable to process delete the draft so
that drafts overlay can be opened without any error. Also report the
exception to the server so that error can be fixed.
The issue has a lot of extra details, but in short, if several
messages were sent at very close to the same time, it's possible that
the event queues will receive the "new message" events out-of-order.
This, in turn, could cause `get_events` to return an incorrectly
sorted block of messages. These would then be passed into
`message_list.add_messages`, which doesn't handle that sort of
unsorted situation correctly (in short, the `self.first.id()`
comparison checks are not accurate for that situation, since we don't
update the boundaries after the first messages is processed).
The end result of this bug was that it was possible for the message
list to be out-of-order, which in turn would cause exceptions when
scrolling with the mouse.
Fixes#6948.
This allows CSS to discriminate by platform and show particular
content; in this case showing things with the attribute
[if-zulip-desktop] content only on “ZulipElectron”.
This switches the checkboxes to be natively grayscale by
referencing the `checkbox.png` file rather than `checkbox-gree.png`
which means that we no longer need to apply the -webkit-filter
setting for grayscale.
This makes the standard checkboxes 7% darker and makes the disabled
ones about 12% darker + 7% darker than they were before, to
increase visibility.
Fixes: #6331.
Previously it was called before the event was processed by the server
and the subscription was updated to have the user subscribed to a
stream, so there was a race condition that would make it iso that
sometimes the stream line would disappear on the next render pass due
to the event not having completed yet.
This makes it so that the re-render happens after the event is
processed in `stream_events.js`.
Fixes: #6797.
This refactors the arguments in the `setup_subscriptions_stream_hash`
method to remove the `stream_id` param and just take it from the `sub`
argument it is passed (which is an object that contains the property,
`stream_id`.
This de-duplicates occurances of the `.no-underline` class by
removing it from "portico.css" and ensuring compaitbility by adding
support for the standard and :hover cases.
This was a not-well-thought-through behavior change done in #6489; the
part that was actually a problem was ctrl-enter not producing spaces
anyway.
So we fix this, and also add a comment explaining why.
Fixes#6908.
Request for adding an reaction only if there is a default emoji or
an active realm emoji with that name while request for removing a
reaction should be sent only if there is a default emoji or a realm
emoji(may be active or deactivated) with that name. Earlier we were
not including deactivated realm emojis while deciding whether a
request for removing a reaction should be sent or not which was
causing requests for the removal of reactions with deactivated realm
emojis not to be sent to the backend.
Fixes: #6007.
The original "quality score" was invented purely for populating
our password-strength progress bar, and isn't expressed in terms
that are particularly meaningful. For configuration and the core
accept/reject logic, it's better to use units that are readily
understood. Switch to those.
I considered using "bits of entropy", defined loosely as the log
of this number, but both the zxcvbn paper and the linked CACM
article (which I recommend!) are written in terms of the number
of guesses. And reading (most of) those two papers made me
less happy about referring to "entropy" in our terminology.
I already knew that notion was a little fuzzy if looked at
too closely, and I gained a better appreciation of how it's
contributed to confusion in discussing password policies and
to adoption of perverse policies that favor "Password1!" over
"derived unusual ravioli raft". So, "guesses" it is.
And although the log is handy for some analysis purposes
(certainly for a graph like those in the zxcvbn paper), it adds
a layer of abstraction, and I think makes it harder to think
clearly about attacks, especially in the online setting. So
just use the actual number, and if someone wants to set a
gigantic value, they will have the pleasure of seeing just
how many digits are involved.
(Thanks to @YJDave for a prototype that the code changes in this
commit are based on.)
We now return user_ids for subscribers to streams in add-stream
events. This allows us to eliminate the UserLite class for
both bulk adds and bulk removes. It also simplifies some JS
code that already wanted to use user_ids, not emails.
Fixes#6898
This function was extracted from build_user_sidebar(). We
also slightly streamlined it to not unnecessarily call
filter() when the filter text was blank. This extraction
also eliminated the need for us to have the two-line
filter_and_sort() function.
Also, we get to 100% coverage in this commit.
We now intialize user-list-filter within activity.initialize(),
which gives us more control to set the module variable
`meta.$user_list_filter` before we build the user sidebar,
while setting up its handlers after we build the sidebar.
We've been getting reports for a few months of folks coming back to
their Zulip window after a night's sleep and finding it scrolled to
the bottom, past dozens or hundreds of messages that they haven't
read. Oddly, the pointer is actually still located where it should be
(verifiable by hitting the Up key), but it's too late: everything
below gets marked as read because bottom_whitespace is in view.
There's only a few places in the zulip codebase where we scroll the
page down, and this is the main one of them. My best theory for what
could be happening is that the browser is, in its overnight
power-saving mode, not granting the Zulip window the resources to
actually repaint the early scrolls. This, in turn, would cause
scrolling down to happen that is not limited by the need to keep the
pointer in view.
I don't think that this fully closes the issue; ideally, we'd have a
reproducer and much more precise detection logic for this situation,
but it should mostly resolve the problem with likely no user-facing
visible harm.
This reverts commit ba8dc62132.
As best I can tell, the old configuration was correct for what Django
wanted. Further testing is required, but this at least brings
.tx/config to match the actual filenames; I think our Chinese
translations have been broken until now.
This commit combines a `tx pull` with updating the translations.json
files to change the values of those items whose key is equal to the
value. The new value is an empty string.
Previously we used to mark a key as unstranlated if its value was equal
to it in translations.json. This had an issue because it didn't allow
otherwise valid cases where key was equal to the value.
This commit solves the problem by disallowing an empty string as a valid
translation and then using the empty string as the value for all the
unstranslated keys.
Fixes#5261
This fixes the width of the call-to-action button to be auto, as it
previously was set in the #hero to be 150px which forced the words in
the button to wrap to two lines.
Currently when hovering on an emoji it will focus it, which makes
the browser by default scroll down or up to include the entirity
of the focused element. This corects the scrollTop to what it was
before the focus event adjusted the scroll position.
This is a follow-up to #6869.
Previously, you had to hover over the smaller area where the emoji
image was to select it, whereas the user expectation is that hovering
the emoji's padding should select it as well.
This commit makes the arrow key navigation and mouse hover affect the
same state such that for example if one moves the mouse over some emoji
and then hits down-arrow the cursor will move down by one from where he
left the mouse at rather than beginning from the top-left corner.
Fixes: #6827.
When the iOS keyboard is open and up, the positioning gotten by
getBoundingClientRect will display a `top` value that is short by the
height of the keyboard, which will usually end up placing things north
of the top of the screen.
By changing to jQuery $.fn.offset instead, the positioning appears to
be correct in all cases; iOS keyboard up, down, and desktop usage.
Fixes: #6366.
This will look through all users and not just ones active in the last
three weeks but only when you are searching with the right sidebar
input box.
Fixes: #5775.
The header line-height is too short when it collapses to multiple
lines so this sets the line-height back to "normal" from "30px"
which sets the text further apart.
The min-height for the error pages was not updated to reflect the
height of the new footer, so this updates the value and makes it a
non-scrolling page in most browsers again.
This sets the column width of the upload table actions and size
columns to always be 75 so that the buttons are always in the same
line and take up the least amount of space possible with that
constraint.
This tries to toggle the next item when clicking on an <h2>
in the sidebar, however we want to first check the next item is
an <ul> element, so that we are collapsing or showing a list,
instead of something like an <h2> which currently happens with
the "#guides" element.
This removes the underline on hover and changes the text to get to the
index.
This also changes it to an <h2> tag so that it will be more inline
with the styling of the rest of the sections, but without the
down chevron.
This restyles the headers to make the <h1> more prominent with a line
break below it, and the <h2> to be less prominent with smaller text and
pushed closer to the <p> tags.
This adds a hover state to just the checkmark that makes it darker
than the line hover state that allows a user to know that the
checkmark is allowed to be toggled.
The `have_scrolled_away_from_top` logic goes way back
to November 2012.
Now we unconditionally load older messages when we scroll
to the top of the feed. Before this bug, you could get
"stuck." It was a bit difficult to reproduce, but with
the right combination of render window sizes and batch
sizes, you would hit the home key quickly and hit the top
of the feed in a way that the flag got in the way of
going back in history.
Fixes#6628
We had a bug where once you scrolled back far enough
in the message view, your "window" for rendered messages
would be at the max, and `prepend` was not adjusting
the window correctly. Now we follow the example of
`append` and call `maybe_rerender`.
This partially addresses #6628, where users were
reporting that the home key stopped going up in their
feed. There was another bug at play for that issue
as well, which is fixed in the next commit.
Before this, the home key would go to the first message in our
render window. Now we go to the first message in our local
list of messages. (Note that there may still be older
messages, so it will still often take multiple uses of the
home key to truly get to the top of your feed.)
In the refactoring in 31d3b1ecc0 that
fixed live-updating of the medium-size avatar data, we started just
fetching the normal-size avatar, not the medium-size avatar. We fix
this by changing this code path to pass in the user object and
construct the URL using that.
While we're at it, we switch to using the user ID, not the email, to
construct these avatar URLs.
Previously, we relied on fetching the name of the user from the data
attributes on the individual elements, when we can get a more reliably
up-to-date value from the people.js data structure we're fetching
anyway.
"Mobile push notifications always" is now indented and a
sub-setting of "Mobile push notifications when offline".
It can be selected only when the outer setting is
selected, otherwise it is greyed out.
Fixes#6570.
We've iterated on this code incorrectly something like 3 times now, so
it's worth rewriting it with a lot of comments in a way that makes
sense.
The main actual functional change here is that modified key + enter
now is consistently the opposite of enter (in terms of whether to
provide a newline or send the message) in all cases.
Fixes#6489.
Now that we display the name and aliases of the currently focused
emoji at the bottom of the emoji picker, we don't need to display
the title text for emojis separately.
Fixes: #6111.
Emoji showcase refers to the space at the bottom of the emoji
picker we use for showing name as well as aliases of the currently
focused emoji.
Fixes: #6110.
This hack was used to fix the broken flag emojis in emoji-picker.
It was broken due to the incomplete migration to iamcal dataset.
See issue #4775 for more details.
This commit switches to use sprite sheets for rendering emojis
in all the remaining places, i.e., message bodies and composebox
typeahead. This commit also includes some changes to notifications.py
file so that the spans used for rendering emojis can be converted
to corresponding image tags so that we don't break the emoji rendering
in missed message emails since we can't use sprite sheets there.
As part of switching the bugdown system to use sprite sheets, we need
to switch the name_to_codepoint mappings to match the new sprite
sheets. This has the side effect of fixing a bunch of emoji like
numbers and flag emoji in the emoji pickers.
Fixes: #3895.
Fixes: #3972.
The sidebar selectors may not exist at a particular point on load but
we’d like to realistically cache the results once they are, so we try
to load them live until we know that a valid selector has been found.
This call to update the users scrollbar is inside a huddles update
method which should only affect the group PMs, so we can remove the
update function.
The `exports.build_user_sidebar` method already calls the resize
function, so there’s no need to call it again or wrap it in the
`actually_update_users_for_search` method.
When a `data-sort` is clicked in the body, it will trigger an attempt
to find the closest `list_render` instance, retrieve it from memory,
and then sort by the particular method specified.
This allows for someone to specify a generic sorting function which
accepts a prop to sort by, a sorting function which runs with just a
function on the whole object, and the ability to remove the sorting
function in play.
This adds the perfectScrollbar to the uploads table so that it will
function properly in the settings container since the parent node has a
perfectScrollbar.
This moves the stuff that should not scroll with the table such as the
search box and tips so it is moved out to be above the
`.progressive-table-wrapper` element.
The "View file" option will open the file in a new window if it
is a filetype that can open in the browser and if not, it will just
trigger a download or whatever the browser's settings are.
This adds a max-width constraint to the hero content so that the images
inside the hero don’t keep expanding forever and eventually outside of
the hero’s bounds.
Fixes: #6713.
This adds the perfectScrollbar to the right side and theoretically
updates it any time a piece of code interacts with the sidebar and
updates the counts of users displayed in it.
This shows the download instructions only selectively based on
whether the device has download instructions for it. This means
currently it shows the page for Windows, Mac, and Linux.
The list needs to be set to use perfectScrollbar so that it can
scroll due to the fact that it resides within another instance of
perfectScrollbar.
Fixes: #6351.
The popovers for the message down chevron and left sidebar had
strange side padding and non-uniform padding between the top and
bottom. This changes them to all have the same padding as the
nav `#gear_menu`; none on the sides and 5px on the top and bottom.
This moves the chevron arrow and the "All Streams" text over 10px
so that it will be inline with the hashes below and not be up
against the edge of the screen in some collapsed modes.
The issue before was that the left sidebar would become too tall for
the screen because the standard header that has “STREAMS” and buttons
is 20px tall, and this one is 30px tall. This makes it much shorter,
changes the text to be the same style as the “STREAMS” text (medium
grey, uppercase text).
The markup is then fixed to be significantly less verbose than before —
changing a list to just a simple link.
This combines two different selections of the
`#stream-filters-container` into one chained selection and writes a
comment on how it is possible due to the return value of `.css`.
We were having an anchor tag inside a button which is incorrect HTML.
Chrome and safari handle this case but firefox doesn't and hence the
dropup menu wasn't opening on firefox.
The progressively rendered table extends too far down, causing the page
to scroll needlessly, which then causes there to be two scrollbars — a
scrollbar for the table and a view scrollbar outside that.
Fixes: #6391.
Brock Whittaker
Tim Abbott
Umair Khan
Shubham Dhama
Vishnu Ks
Aastha Gupta
akashnimare
rht
Alena Volkova
Harshit Bansal
Steve Howell
amanharitsh123
Garvit
Eeshan Garg
Greg Price
brockwhittaker
derAnfaenger
Cynthia Lin
Sarah
Nalin Bhardwaj
Anupam-dagar
Ali Rizwi
YJDave
Rhea Parekh