Since spectators can't access personal profile settings and
can't view profile for other users. Hence, we don't send realm
custom profile field data and user's profile data to spectators.
Fixes#20301.
Enable spectator access for test `zulip` realm in developement
setup.
Add option in `do_create_realm` to configure
`enable_spectator_access` field of `Realm`.
If null is a potential value of data type for a return value or
parameter in the API endpoint, then it is rendered as an option.
This currently relies on the 'nullable' setting in the OpenAPI spec
that was removed in the 3.1.0 release. If/when the OpenAPI version
is updated, then how the `data_type` for parameters and return values
is rendered will need to be reworked.
Fixes#20264.
RabbitMQ clients have a setting called prefetch[1], which controls how
many un-acknowledged events the server forwards to the local queue in
the client. The default is 0; this means that when clients first
connect, the server must send them every message in the queue.
This itself may cause unbounded memory usage in the client, but also
has other detrimental effects. While the client is attempting to
process the head of the queue, it may be unable to read from the TCP
socket at the rate that the server is sending to it -- filling the TCP
buffers, and causing the server's writes to block. If the server
blocks for more than 30 seconds, it times out the send, and closes the
connection with:
```
closing AMQP connection <0.30902.126> (127.0.0.1:53870 -> 127.0.0.1:5672):
{writer,send_failed,{error,timeout}}
```
This is https://github.com/pika/pika/issues/753#issuecomment-318119222.
Set a prefetch limit of 100 messages, or the batch size, to better
handle queues which start with large numbers of outstanding events.
Setting prefetch=1 causes significant performance degradation in the
no-op queue worker, to 30% of the prefetch=0 performance. Setting
prefetch=100 achieves 90% of the prefetch=0 performance, and higher
values offer only minor gains above that. For batch workers, their
performance is not notably degraded by prefetch equal to their batch
size, and they cannot function on smaller prefetches than their batch
size.
We also set a 100-count prefetch on Tornado workers, as they are
potentially susceptible to the same effect.
[1] https://www.rabbitmq.com/confirms.html#channel-qos-prefetch
Race conditions in stream unsubscription may lead to multiple
back-to-back SUBSCRIPTION_DEACTIVATED RealmAuditLog entries for the
same stream. The current logic constructs duplicate UserMessage
entries for such, which then later fail to insert.
Keep a set of message-ids that have been prep'd to be inserted, so
that we don't duplicate them if there is a duplicated
SUBSCRIPTION_DEACTIVATED row. This also renames the `message` local
variable, which otherwise overrode the `message` argument of a
different type.
Previously, our codebase contained links to various versions of the
Django docs, eg https://docs.djangoproject.com/en/1.8/ref/
request-response/#django.http.HttpRequest and https://
docs.djangoproject.com/en/2.2/ref/settings/#std:setting-SERVER_EMAIL
opening a link to a doc with an outdated Django version would show a
warning "This document is for an insecure version of Django that is no
longer supported. Please upgrade to a newer release!".
Most of these links are inside comments.
Following the replacement of these links in our docs, this commit uses
a search with the regex "docs.djangoproject.com/en/([0-9].[0-9]*)/"
and replaces all matches with "docs.djangoproject.com/en/3.2/".
All the new links in this commit have been generated by the above
replace and each link has then been manually checked to ensure that
(1) the page still exists and has not been moved to a new location
(and it has been found that no page has been moved like this), (2)
that the anchor that we're linking to has not been changed (and it has
been found that no anchor has been changed like this).
One comment where we mentioned a Django version in text before linking
to a page for that version has also been changed, the comment
mentioned the specific version when a change happened, and the history
is no longer relevant to us.
For export realm following changes have been made:
- `./manage.py export --upload` would delete `.tar.gz` and unpacked dir
- `./manage.py export` would only delete `unpacked dir`
Besides, we have removed `--delete-after-upload` as we have set it as
the default.
Fixes#20081
If realm is web_public, spectators can now view avatar of other
users.
There is a special exception we had to introduce in rest model to
allow `/avatar` type of urls for `anonymous` access, because they
don't have the /api/v1 prefix.
Fixes#19838.
This commit updates the error message returned when the maximum
invite limit for the day. We update the error returned by API to
only mention that the limit is reached and add the suggestion
to use multi-use link or contact support in the message shown
in webapp.
We create RealmUserDefault object for internal realm just
for consistency. The code in migration does so but it
was missed to add the code when creating new internal realm.
Not proxying these requests through camo is a security concern.
Furthermore, on the desktop client, any embed image which is hosted on
a server with an expired or otherwise invalid certificate will trigger
a blocking modal window with no clear source and a confusing error
message; see zulip/zulip-desktop#1119.
Rewrite all `message_embed_image` URLs through camo, if it is enabled.
Supporting URL percent-encoded bytes is possible using `%%20`, but this
is not necessarily very understandable to end-users, even those that
understand percent encoding.
Allow `%20` in linkifier URL format strings, and transform them into
`%%20` in the pattern just before they are applied in markdown
translation. Care must be taken here, such that already-escaped `%`s
are not escaped an extra time.
We do this before rendering, and not before storage, as
a simplification; the JS-side linkifier at present only understands
`%(foo)s` and thus needs no changes, and to avoid an un-escaping pass
before showing in the admin UI.
og:image is supposed to be an absolute URL, but some sites incorrectly
provide a relative URL. In this case, it makes more sense to
interpret it relative to the full page URL after redirects, rather
than relative to just the domain part of the page URL before
redirects.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Removes the `/day` and `/night` options from the typeahead menu while
still allowing the commands to be used. Typing `/day` and `/night`
will now suggest `/light` and `/dark`, respectively. Also changes the
`Dark mode` and `Light mode` popups that appear after using the
corresponding command.
Fixes#18318.
This makes logging more consistent between FCM and APNs codepaths, and
makes clear which user-ids are for local users, and which are opaque
integers namespaced from some remote zulip server.
Being able to determine how many distinct users are getting push
notifications per remote host is useful, as is the distribution of
device counts. This parallels the log line in
handle_push_notification for push notifications from local realms,
handled via the event queue.
It is confusing to have the plan type constants not be namespaced
by the thing they represent. We already have a namespacing
convention in place for constants, so we should use it for
Realm.plan_type as well.
`rendered_content` in historical messages may be empty; examining the
history of them may thus require diff'ing two empty strings, which
itself produces an empty string.
Use `lxml.html.fragment_fromstring` to be able to successfully parse
these, rather than 500.
Part of #19559.
As detailed in the comments, the default behavior is undesirable for us
because we can't really predict all possibilities of exceptions that may
be raised - and thus putting str(e) in the http response is potentially
insecure as it may leak some unexpected sensitive information that was
in the exception.
As a hypothetical example - KeyError resulting from some buggy
some_dict[secret_string] call would leak information. Though of course
we aim to never write code like that.
This commit adds related_name parameter to UserGroup.direct_members
such that we can use direct_groups instead of the default
usergroupmembership_set for getting all the groups of which the
user is direct member.
This commit also sets related_name of UserGroupMembership.user_group
and UserGroupMembership.user_profile to "+" which means that we will
not be having backward relations for these. This change is correct
since we would need to use the recursive queries to get all the
groups of a user and all the members of a group after we add the
subgroups concept in next commit. This leads to us using direct_members
field of UserGroup instead of usergroupmembership_set in mention code,
but this will soon be replaced with the recursive query function to
include subgroup's members as well.
Extracted this commit from #19866.
Authored-by : Anders Kaseorg <anders@zulip.com>
This commit makes the query in get_user_group_direct_members
efficient by directly fetching user-profile ids instead of
first fetching user profile object and then id.
This commit renames members field of UserGroup to direct_members
for better readability because in the new permissions model, a
user group can be a sub-group of another group and thus technically
members of sub-group will also be members of that group.
This is a prep commit for new permissions model.
Extracted this commit from #19866.
Co-authored-by: Anders Kaseorg <anders@zulip.com>
This is a prep commit for new permissions model in
which a user group would be able to have a subgroup.
This commit renames get_memberships_of_users to
get_direct_memberships_of_users to specify that
the function is used only to fetch the direct
memberships and not memberships of subgroups of
the direct group.
Extracted this commit from #19866.
Co-authored-by: Anders Kaseorg <anders@zulip.com>
This is a prep commit for new permissions model in which a user
group would be able to have a subgroup.
This commit renames get_user_groups to get_direct_user_groups
to specify that the function is used only to fetch the direct
groups that user is part of and not subgroups of the direct
group.
Extracted this commit from #19866.
Co-authored-by: Anders Kaseorg <anders@zulip.com>
This is a prep commit for new permissions model in which a user group would
be able to have a subgroup.
This commit renames get_user_group_members to get_user_group_direct_members
to specify that the function is used only to fetch direct members of group
and excludes the subgroup's members.
Extracted this commit from #19866.
Co-authored-by: Anders Kaseorg <anders@zulip.com>
From 430c5cb, in `fetch_initial_state_data`,
we only include legacy settings in the top level of
`state` and the newer ones are stored in `state['user_settings']`.
That should've had a corresponding change in apply_event().
Also, fixed a test related to this logic.
Aman Agrawal
Sahil Batra
Lauryn Menard
Alex Vandiver
YashRE42
Shlok Patel
Tim Abbott
Mateusz Mandera
Anders Kaseorg
Jonny Tran
rht
Eeshan Garg
Vishnu KS
Alya Abbott
Dinesh