First, there are no more convoluted signals.
We also simplify the parameter to just the "mentioned"
object corresponding to either a user or a broadcast
mention.
For the user group scenario, this has always been dead
code, which you only realized when you got to the comment
at the bottom. Now we actually do nothing.
And I moved the relevant commment to the
the typeahead code (with new wording).
I also moved the is_silent check to the caller. I don't
feel too strongly about that either way. It's kind of silly
to call a function only to give that function an additional
responsibility to worry about. On the other hand, I see
the logic of that function enforcing everything. I went
with the former for now.
Arguably we should have a warning for silent mentions,
since doing a silent mention of somebody not on a stream
is a good indication of a typo. I do understand the use
case, but the user can always ignore the warning. Anyway,
we have decent test coverage on this.
This isn't really an extraction; it's more giving
a name to an anonymous function and moving it to
higher module scope.
We convert this to an ordinary function call, which
allows us to move it out of intialize().
Since there's just one simple parameter now (linked_stream),
we can avoid some error checking.
We also avoid the comment that describes the function,
since it now has a name.
And then one minor tweak is to do the inexpensive
`invite_only` higher in the function. This will be
a nice speedup when you link to really large public
streams.
The unit tests are also a bit easier to read now--less
setup and more explicit names.
This is a preparatory commit for using isort for sorting all of our
imports, merging changes to files where we can easily review the
changes as something we're happy with.
These are also files with relatively little active development, which
means we don't expect much merge conflict risk from these changes.
This is easier to read and faster, because it
avoids some unnecessary encoding on the pm-with
part, plus just a lot of extra logic that amounts
to just appending the slug.
Performance for this function is relevant because it is used
for every user every time we rerender the right sidebar.
Previously, if you tried to invite a user whose account had been
deactivated, we didn't provide a clear path forward for reactivating
the users, which was confusing.
We fix this by plumbing through to the frontend the information that
there is an existing user account with that email address in this
organization, but that it's deactivated. For administrators, we
provide a link for how to reactivate the user.
Fixes#8144.
This fixes a similar problem to the last commit; we don't use
memcached with the test database, so we don't need to flush memcached
when rebuilding it.
(And if we try, we'll get exceptions trying to access the relevant
settings).
Our recent fixes to using the system's configured memcached settings
broke populate_db, because its hacky clear_database helper is called
with a hacked-up settings module.
We fix this by first moving this out-of-place code from models.py into
populate_db, and then saving the settings required to access memcached
so that we can use them in clear_database.
We also fix a mypy erorr in flush-memcached that matches the same
issue fixed in clear_database.
This experimental setting disables sending private messages in Zulip
in a crude way (i.e. users get an error when they try to send one).
It makes no effort to adjust the UI to avoid advertising the idea of
sending private messages.
Fixes#6617.
The sort_recipients helper is used for many different
typeaheads, such as compose PMs, compose mentions,
and some settings-related code.
We now avoid unnecessary sorting steps in cases
where we have plenty of results in the top buckets
(such as users who match on prefix).
This change should not have any user-facing
implications.
This method is a bit complex, but I think it's
worthwhile to force PM autocompletes and mention
autocompletes through the same code path.
We also kill off this method:
typeahead_helper.sort_people_and_user_groups
This fixes some regressions from a recent
commit that might not have been deployed.
9f7be51ce8
Even if that change had been deployed, it
should not have been user-facing, but it
would have spammed us with blueslip errors
every time somebody used the stream/topic
popovers in the left sidebar.
There's no reason any more to have a single function
filter both persons and groups. Instead, we just
filter each cohort with a more direct function.
This is a minor performance speedup (avoiding the
conditional in the loop), but I mostly wanted to
simplify the code.
The sort_people_and_user_groups function's only
value-add over sort_recipients is to split out
groups and users, but the caller already had
them split out, so it was kinda silly to concatenate
them back together.
I doubt this was a dumb decision at the time; I think
it was probably a consequence of how bootstrap's
normal approach is kinda inflexible when you're
using typeahead to pull data from multiple sources.
I wanted to kill off sort_people_and_user_groups
completely, but the mention/silent_mention autocompletes
are still a bit awkward to refactor.
For historical reasons pm_list was handling just
one possible edge case of where is:private was
combined with other search terms, namely the
pm-with operator.
The code was correct in realizing the is:private
was redundant there, but now we handle that
upstream in Filter.fix_operators (see previous
commit).
Now we just look for any is:private term.
The well-known rowanj/gitx repository hasn't been updated since 2014.
Preferentially direct new contributors to gitx/gitx instead.
(We retain the rowanj repo as a fallback, since it has precompiled
releases available.)
We should take adventage of the recipient field being denormalized into
the Stream model. We don't need to make queries to figure out a stream's
recipient id, so we take advantage of that to eliminate some of
those redundant queries and simplify StreamRecipientMap.
This change makes these two functions more alike:
- get_search_result
- get_search_result_legacy
To test the UI modify zerver/views/home.py by
replacing `settings.SEARCH_PILLS_ENABLED` with
`True`. I only did a quick sanity check, since
any bugs with the new system are more likely due
to bitrot than any changes I have made here.
The history is this:
Tim cloned the code (before the smaller
helpers were extracted):
db4f6e278f
In 8b153f6452
Shubham removed get_operator_subset_suggestions but
accidentally left a `concat` statement in that got
misapplied to the previous suggestions:
- suggestions = get_operator_subset_suggestions(operators);
result = result.concat(suggestions);
The error there was carried over in some recent changes,
but this commit fixes that strangeness.
In 73e4f3b3fa
Shubham made this change, which makes sense only for
pills, and this code remains intact.
- if (operators.length > 0) {
- last = operators.slice(-1)[0];
+ if (query_operators.length > 0) {
+ last = query_operators.slice(-1)[0];
+ } else {
+ // If query_operators = [] then last will remain
+ // {operator: '', operand: '', negated: false}; from above.
+ // `last` has not yet been added to operators/query_operators.
+ // The code below adds last to operators/query_operators
+ operators.push(last);
+ query_operators.push(last);
}
Mohit made a couple changes to both old and new.
Anders made a couple non-substantive changes related to
the ES6 migration.
Steve (me) made several structural changes to the code. For
some of them I only changed the legacy code, not the pills
code. I didn't fix Shubham's mistake until this change.
Now the two functions should look similar except in the places
where they are intentionally different. I also added a comment
explaining the get_operator_subset_suggestions difference.
Fixes#13609
There may be a deeper issue that various JavaScript logic expects
every message to have a `.message_content` element, but we definitely
should have the `.rendered_markdown` class on any markdown content.
Fixes#13634.
The reason we use functions here will be clear
in the next change.
This is a "prefactor" commit that doesn't change
any user-facing behavior nor significantly change
performance.
A few reasons to extract it:
- we can shorten lines (and not repeat query
every time)
- we can scope the big block comment explaining
why util.prefix_sort is a strange name
- the name is better (it's an O(N) operation that
mostly partitions)
- we may want to swap it out with a true partition
function that's truly a partition (since the
case checks done by prefix_sort are possibly
either a non-feature or mostly overridden by
the other sorts)
This removes zerver/webhooks/trello/view/exceptions.py, which
contained legacy Trello webhook exception related classes. We replace
them with UnexpectedWebhookEventType, which results in our standard
exception handling for unknown event types running (avoiding too-high
priority error logging).
Fixes#13467.
Resolves these warnings from puppet-lint.
puppet-lint| puppet/zulip/manifests/app_frontend_base.pp - WARNING: double quoted string containing no variables on line 14
puppet-lint| puppet/zulip/manifests/app_frontend_base.pp - WARNING: double quoted string containing no variables on line 19
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
Steve Howell
Tim Abbott
Tlazypanda
Anders Kaseorg
Mateusz Mandera
Ray Kraesig
shubhamgupta2956
rht