This provides a clean warning and 40x error, rather than a 500, for
this corner case which is very likely user error.
The test here is awkward because we have to work around
https://github.com/zulip/zulip/issues/12362.
This contains email of the user to whom notification is being
send. This has not been used in any past mobile releases, so it is
safe to remove it.
As user_id will be stable for the user, but not email. So it's better to
start consuming `user_id` instead of email on mobile.
When a bunch of messages with active notifications are all read at
once -- e.g. by the user choosing to mark all messages, or all in a
stream, as read, or just scrolling quickly through a PM conversation
-- there can be a large batch of this information to convey. Doing it
in a single GCM/FCM message is better for server congestion, and for
the device's battery.
The corresponding client-side logic is in zulip/zulip-mobile#3343 .
Existing clients today only understand one message ID at a time; so
accommodate them by sending individual GCM/FCM messages up to an
arbitrary threshold, with the rest only as a batch.
Also add an explicit test for this logic. The existing tests
that happen to cause this function to run don't exercise the
last condition, so without a new test `--coverage` complains.
Since da8f4bc0e back in August, this control flow has caused
`flags.active_mobile_push_notification` to be cleared if we don't send
these `remove` messages at all, and if we send them directly to GCM...
but not if we send them via the Zulip notification bouncer.
As a result, on a server configured to send `remove` notification-messages
via the bouncer, we accumulate "active" messages and never clear them.
If the user then does `mark_all_as_read`, we end up sending a `remove`
for each of those messages again, and all in one giant burst. We've
seen puzzling bursts of hundreds of removals pass through the bouncer
since turning on removals on chat.zulip.org; it's likely many of them
are caused by this bug.
This issue was made more acute with f4478aad5, which unconditionally
enabled removals.
Test added by tabbott.
The client-side fix to make these not a problem was in release
16.2.96, of 2018-08-22. We've been sending them from the
development community server chat.zulip.org since 2018-11-29.
We started forcing clients to upgrade with commit fb7bfbe9a,
deployed 2018-12-05 to zulipchat.com.
(The mobile app unconditionally makes a request to a route on
zulipchat.com to check for this kind of forced upgrade, so that
applies to mobile users of any Zulip server.)
So at this point it's long past safe for us to unconditionally
send these. Hardwire the old `SEND_REMOVE_PUSH_NOTIFICATIONS`
setting to True, and simplify it out.
I was hoping this would make things faster... it does, but sadly only
by about 70ms, 5% of this file's test runtime.
It sure does make this file rather less action-at-a-distance, though,
as well as fixing some duplication.
If we make a practice on the Zulip server of always explicitly setting
the desired priority, then when an old server doesn't set the priority
we can reasonably have the bouncer make a guess.
That is, this allows a Zulip server to now set the `priority`; but if
it doesn't, we use upstream's default value, which has the same effect
as we've always previously had by not setting it at all.
But when this is deployed to the push notifications bouncer server, it
does allow another server to set priority when pushing notifications
through the bouncer.
This adds a new API for sending basic analytics data (number of users,
number of messages sent) from a Zulip server to the Zulip Cloud
central analytics database, which will make it possible for servers to
elect to have their usage numbers counted in published stats on the
size of the Zulip ecosystem.
This checks if push_notification_enabled() is set to false in
handle_push_notification and adds an early return statement.
This is a significant performance optimization for our unit tests
because the push notifications code path does a number of database
queries, and this migration means we don't end up doing those queries
the hundreds of times we send PMs or mentions in our tests where we're
not trying to test the push notifications functionality.
This should also have a small message sending scalability improvement
for any Zulip servers without push notifications enabled.
Tweaked by tabbott to fix a few small issues.
Fixes#10895.
While reviewing #11012, I discovered a nondeterministic result for
test_signup, which I tracked down to specifically this triple of tests
failing when run in this order:
test-backend GCMSuccessTest \
zerver.tests.test_push_notifications.TestAPNs.test_get_apns_client \
zerver.tests.test_signup.LoginTest.test_register
with a query count mismatch like this:
expected length: 73
actual length: 79
Comparing the list of queries, it's clear that test_register was
seeing `push_notifications_enabled()` returning True in this test order.
It's not clear why GCMSuccessTest was required here (it was!), but
further debugging determined the problem was that
`test_get_apns_client` left the _apns_client initialization system in
a state where get_apns_client would return a non-None value, resulting
in push_notifications_enabled() returning True for future tests.
The immediate fix is to just reset the `_apns_client` and
`_apns_client_initializedstate` state properly after the test runs;
but arguably we should do a larger refactor to make this less
fragile.
If a user deletes message between when it triggered a potential push
notification for another user, and when that notification was actually
sent, we'd end up with a situation where the `Message` table didn't
have an entry for the requested message ID.
The clean fix for this is to still throw an exception in the event
that the message doesn't exist at all, but if it exists in
ArchivedMessage, don't throw a user-facing exception.
While it could make sense to print these logging statements at WARN
level on server startup, it doesn't make sense to do so on every
message (though it perhaps did make sense to do so before more recent
changes added good ways to discover you forgot to configure push
notifications).
Instead, we now just do a WARN log on queue processor startup, and
then at DEBUG level for individual messages.
Fixes#10894.
Also, rename get_alert_from_message to get_gcm_alert.
With the implementation of the and get_apns_alert_title and
get_apns_alert_subtitle, the logic within get_alert_from_message
is only relevant to the GCM payload, so we adjust the name
accordingly.
Progresses #9949.
Resolves https://github.com/zulip/zulip-mobile/issues/1316.
The string that is returned from get_alert_from_message is
dependent upon the same message that is passed into get_apns_payload
and get_gcm_payload. The contents of those payloads that are tested via
TestGetAPNsPayload and TestGetGCMPayload, which makes the tests for
get_alert_from_message redundant.
Also, simplify the logic by removing the last elif conditional.
The APNS client libraries (especially the hyper.http20 one) were
determined via profiling to take significant time during the import
process, so we move them to be lazily imported in order to optimize
the overall Zulip import process. This save up to about 100ms in
import time.
These libraries are only used in certain Django processes inside
zulipchat.com, and so are unnecessary both in development as well as
for self-hosted Zulip servers.
Now that we allow multiple users to have registered the same token, we
need to configure calls to unregister tokens to only query the
targeted user_id.
We conveniently were already passing the `user_id` into the push
notification bouncer for the remove API, so no migration for older
Zulip servers is required.
This uses the recently introduced active_mobile_push_notification
flag; messages that have had a mobile push notification sent will have
a removal push notification sent as soon as they are marked as read.
Note that this feature is behind a setting,
SEND_REMOVE_PUSH_NOTIFICATIONS, since the notification format is not
supported by the mobile apps yet, and we want to give a grace period
before we start sending notifications that appear as (null) to
clients. But the tracking logic to maintain the set of message IDs
with an active push notification runs unconditionally.
This is designed with at-least-once semantics; so mobile clients need
to handle the possibility that they receive duplicat requests to
remove a push notification.
We reuse the existing missedmessage_mobile_notifications queue
processor for the work, to avoid materially impacting the latency of
marking messages as read.
Fixes#7459, though we'll need to open a follow-up issue for
using these data on iOS.
This adds a new function called handle_remove_push_notification in
zerver/lib/push_notifications.py which requires user_profile id and
the message id which has to be removed in the function.
For now, the function only supports GCM (and is mostly there for
prototyping).
The payload which is being delivered needs to contain the narrow
information and the content of the message.
This should make it much simpler for the mobile apps to line up the
data from server_settings against the data in the notifications.
Addresses part of #10094.
We've had this sort of logic for GCM for a long time; it's worth
adding for APNS as well.
Writing this is a bit of a reminder that I'm not a fan of how our unit
tests for push notifications work.
This exception class was clearly missing the part where `role` gets
stored, which was intended to be inherited from
InvalidZulipServerError.
This fixes an unnecessary 500 error in the push notifications bouncer.
This field has been unused by clients for some time, and isn't great
for our public archive feature plans (where we'll not want to be
including email addresses in messages).
When the answer is False, this will allow the mobile app to show a
warning that push notifications will not work and the server admin
should set them up.
Based partly on Kunal's PR #7810. Provides the necessary backend API
for zulip/zulip-mobile#1507.
I got distracted, came back later to a successful test run in my
terminal, and thought I remembered finishing the change and just
kicking off a final test run to check.
In fact, there was an `assert False` right in the normal case for
production, and I just hadn't finished a test for that path. (m.-)
Definitely the most grateful I've been for our coverage checks,
which highlighted this for me.
Remove the `assert False`, and also finish writing the test it was
there to help me write. Those lines are covered now.
Previously, these push notification events were being generated, but
then ignored in handle_push_notification because there was no
user_message object.
This removes the utterly unnecessary `triggers` dict (which always was
a dict with exactly one value True) in favor of a single field,
'trigger'.
Inspired by Kunal Gupta's work in #6659.
This test suite works by using the expected_output and new text_output
fields in the bugdown test cases to verify that each syntax is
correctly translated by this new function.
Some of these translations, like strikethrough, are kinda poor; but
this framework should make it easy to iterate on the formatting.
Fixes: #6720.
This is just enough of a quick fix to work with a stock Zulip 1.6
server. We should really also make this robust to arbitrary input
from the remote Zulip server, even though it'll be a little tedious.
And it works!
A couple of things still to do:
* When a device token is no longer active, we'll get HTTP status 410.
We should then remove the token from the database so we don't keep
trying to push to it. This is fairly urgent.
* The library we're using has a nice asynchronous API, but this
version doesn't use it. This is OK now, but async will be
essential at scale.
This code empirically doesn't work. It's not entirely clear why, even
having done quite a bit of debugging; partly because the code is quite
convoluted, and because it shows the symptoms of people making changes
over time without really understanding how it was supposed to work.
Moreover, this code targets an old version of the APNs provider API.
Apple deprecated that in 2015, in favor of a shiny new one which uses
HTTP/2 to meet the same needs for concurrency and scale that the old
one had to do a bunch of ad-hoc protocol design for.
So, rip this code out. We'll build a pathway to the new API from
scratch; it's not that complicated.
The whole thing is an error, so "message" is a more apt word for the
error message specifically. We abbreviate that as `msg` in the actual
HTTP responses and in the signatures of `json_error` and friends, so
do the same here.
This fixes a bug where we would previously not validate the format of
APNS tokens before writing them to the database, which could lead to
exceptions in the push notifications system if a buggy mobile app
submitted invalid format tokens.
This fixes most cases where we were assigning a user to
the var email and then calling get_user_profile_by_email with
that var.
(This was fixed mostly with a script.)
This is an incomplete cleaned-up continuation of Lisa Neigut's push
notification bouncer work. It supports registration and
deregistration of individual push tokens with a central push
notification bouncer server.
It still is missing a few things before we can complete this effort:
* A registration form for server admins to configure their server for
this service, with tests.
* Code (and tests) for actually bouncing the notifications.
This refactoring is preparation for being able to forward push
notifications to users on behalf of another Zulip server.
The goal is to remove access to the current server's database from the
send_*_push_notification code paths.
We now have 100% coverage on views/push_notifications.py, modulo
some dead code which will be addressed in the next commit.
There were some existing tests in text_external.py, but that
module is really intended for tests that hit external services.
The view is a really simple API that updates a DB table, and the
new test code focuses on error handling and idempotency as well
as the happy path.
Mateusz Mandera
Tim Abbott
Vishwesh Jainkuniya
Greg Price
Anders Kaseorg
kunal-mohta
ishanrai05
Steve Howell
Jack Zhang
Kunal Gupta
Aditya Bansal
Preston Hansen
Alena Volkova
Vishnu Ks
rht
Maarten Rijke
Harshit Bansal
derAnfaenger
Sarah
Greg Price
Umair Khan
Vishnu Ks
Rick Chern
Steve Howell
Raghav Jajodia
Tomasz Kolek
bulat22101
Sidhant Bhavnani
Rafid Aslam
sinwar