This commit updates the existing tests in 'test_email_notifications'
and 'test_push_notifications' to properly configure user settings
and visibility policies before running the actual tests.
Earlier, the tests were passing, but the corner case expected
to be covered wasn't covered.
This should have been included in
d80779435a.
These comments should not have been included in
a8fd9eb701.
We covered the case "Private message should soft reactivate
the user" earlier in the test. So the comment was rightly added
there.
During stream wildcard or group mention, no such personal mention
is involved; hence, the comments are not needed.
This prep commit replaces the 'wildcard' keyword in the codebase
with 'stream_wildcard' at some places for better readability, as
we plan to introduce 'topic_wildcards' as a part of the
'@topic mention' project.
Currently, 'wildcards = ["all", "everyone", "stream"]' which is an
alias to mention everyone in the stream, hence better renamed as
'stream_wildcards'.
Eventually, we will have:
'stream_wildcard' as an alias to mention everyone in the stream.
'topic_wildcard' as an alias to mention everyone in the topic.
'wildcard' refers to 'stream_wildcard' and 'topic_wildcard' as a whole.
The 'get_gcm_alert' and 'get_apns_alert_subtitle' functions
don't include the case when the trigger is
'NotificationTriggers.FOLLOWED_TOPIC_WILDCARD_MENTION'.
This commit updates the functions to include
'NotificationTriggers.FOLLOWED_TOPIC_WILDCARD_MENTION'.
Note that we use the DjangoJSONEncoder so that we have builtin support
for parsing Decimal and datetime.
During this intermediate state, the migration that creates
extra_data_json field has been run. We prepare for running the backfilling
migration that populates extra_data_json from extra_data.
This change implements double-write, which is important to keep the
state of extra data consistent. For most extra_data usage, this is
handled by the overriden `save` method on `AbstractRealmAuditLog`, where
we either generates extra_data_json using orjson.loads or
ast.literal_eval.
While backfilling ensures that old realm audit log entries have
extra_data_json populated, double-write ensures that any new entries
generated will also have extra_data_json set. So that we can then safely
rename extra_data_json to extra_data while ensuring the non-nullable
invariant.
For completeness, we additionally set RealmAuditLog.NEW_VALUE for
the USER_FULL_NAME_CHANGED event. This cannot be handled with the
overridden `save`.
This addresses: https://github.com/zulip/zulip/pull/23116#discussion_r1040277795
Note that extra_data_json at this point is not used yet. So the test
cases do not need to switch to testing extra_data_json. This is later
done after we rename extra_data_json to extra_data.
Double-write for the remote server audit logs is special, because we only
get the dumped bytes from an external source. Luckily, none of the
payload carries extra_data that is not generated using orjson.dumps for
audit logs of event types in SYNC_BILLING_EVENTS. This can be verified
by looking at:
`git grep -A 6 -E "event_type=.*(USER_CREATED|USER_ACTIVATED|USER_DEACTIVATED|USER_REACTIVATED|USER_ROLE_CHANGED|REALM_DEACTIVATED|REALM_REACTIVATED)"`
Therefore, we just need to populate extra_data_json doing an
orjson.loads call after a None-check.
Co-authored-by: Zixuan James Li <p359101898@gmail.com>
This adds support to accepting extra_data being dict from remote
servers' RealmAuditLog entries. So that it is forward-compatible with
servers that have migrated to use JSONField for RealmAuditLog just in
case. This prepares us for migrating zilencer's audit log models to use
JSONField for extra_data.
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
This prepares for the audit log migration which requires us to populate
a JSONField from the extra_data field. "data" is not representative of
the actual extra_data field for RealmAuditLog entries of event types
in SYNC_BILLING_EVENTS.
We intentionally leave the test cases unchanged without bothering to
verify if the extra_data arrives as-is to keep this change minimal.
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
Servers that had upgraded from a Zulip server version that did not yet
support the user_uuid field to one that did could end up with some
mobile devices having two push notifications registrations, one with a
user_id and the other with a user_uuid.
Fix this issue by sending both user_id and user_uuid, and clearing
"check_add_user_group" is a safer helper function than
"create_user_group" to use when creating user_groups. It does
error handling and notify the client with the appropriate event.
Note that the populate_db command still uses "create_user_group"
because we do not need to enqueue events at that point.
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
Since this function creates a new user group into the database,
it is more appropriate to have it not as a generic "lib" function
but as an "action".
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
Black 23 enforces some slightly more specific rules about empty line
counts and redundant parenthesis removal, but the result is still
compatible with Black 22.
(This does not actually upgrade our Python environment to Black 23
yet.)
Signed-off-by: Anders Kaseorg <anders@zulip.com>
This commit adds the OPTIONAL .realm attribute to Message
(and ArchivedMessage), with the server changes for making new Messages
have this set. Old Messages still have to be migrated to backfill this,
before it can be non-nullable.
Appropriate test changes to correctly set .realm for Messages the tests
manually create are included here as well.
Recipient with type PERSONAL type_id 1 is a Recipient for a system bot,
since those get created first. Even if it doesn't break tests, it's
still bad, because it is not the intention of those tests to simulate a
cross-realm private message to a system bot.
This is preparatory commit for #18941.
Importing `do_delete_message` from `message_edit.py` was causing a
circular import error. In order to avoid that, we create a separate
message_delete.py file which has all the functions related to deleting
messages.
The tests for deleting messages are present in
`zerver/tests/test_message_edit.py`.
Fixes a part of #18941
django.request logs responses with 5xx response codes (our configuration
of the logger prevents it from logging 4xx as well which it normally
does too). However, it does it without the traceback which results in
quite unhelpful log message that look like
"Bad Gateway:/api/v1/users/me/apns_device_token" - particularly
confusing when sent via email to server admins.
The solution here is to do the logging ourselves, using Django's
log_response() (which is meant for this purpose), and including the
traceback. Django tracks (via response._has_been_logged attribute) that
the response has already been logged, and knows to not duplicate that
action. See log_response() in django's codebase for these details.
Fixes#19596.
It seems helpful for this to get logged with the traceback rather than
just the general
"<exception name> while trying to connect to push notification bouncer."
This allows us to separate the zilencer paths from other JSON paths,
with explicit type annotation expecting `RemoteZulipServer` as the
second parameter of the handler using
authenticated_remote_server_view.
The test case is also updated to remove a test for a situation that no
longer occurs anymore, since we don't perform subdomain checks on
remote servers.
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
Removes `token_kind` parameter being passed to
`remove_apns_device_token` and `remove_android_reg_id` code
paths / endpoints. Possibly missed in a refactor of this
function as the tests for adding these tokens do not pass
a `token_kind` parameter.
Removes `zulip_org_id` and `zulip_org_kay` from code testing
`deactivate_remote_server`. These parameters are passed when
a remote server is added, so possibly a copy and paste error
when these tests were written / last refactored.
Previous behavior was logging only the uuid if it was provided by the
remote server, but that's insufficient, because the user may actually
have no devices registered with uuis and we (at the bouncer) end up
sending notifications to id-based registrations. Not having that id
logged makes it impossible to figure out what's going on.
Fixes#18017.
In previous commits, the change to the bouncer API was introduced to
support this and then a series of migrations added .uuid to
UserProfiles.
Now the code for self-hosted servers that makes requests
to the bouncer is changed to make use of it.
This is the first step to making the full switch to self-hosted servers
use user uuids, per issue #18017. The old id format is still supported
of course, for backward compatibility.
This commit is separate in order to allow deploying *just* the bouncer
API change to production first.
When removing notifications, we skip the access control on if the user
still can read them -- they should not have a notification of them,
both because they currently cannot read the message, as well as
because they have already done so.
aioapns 2.1 removed the loop parameter from the aioapns.APNs
constructor, because Python 3.10 removed the loop parameter from the
asyncio.Lock constructor.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
get_remote_server_by_uuid (called in validate_api_key) raises
ValidationError when given an invalid UUID due to how Django handles
UUIDField. We don't want that exception and prefer the ordinary
DoesNotExist exception to be raised.
APNs payloads nest the zulip-custom data further than the top level,
as Android notifications do. This led to APNs data silently never
being truncated; this case was not caught in tests because the mocks
provided the wrong data for the APNs structure.
Adjust to look in the appropriate place within the APNs data, and
truncate that.
As explained in the comments in the code, just doing UUID(string) and
catching ValueError is not enough, because the uuid library sometimes
tries to modify the string to convert it into a valid UUID:
>>> a = '18cedb98-5222-5f34-50a9-fc418e1ba972'
>>> uuid.UUID(a, version=4)
UUID('18cedb98-5222-4f34-90a9-fc418e1ba972')
Given that these values are uuids, it's better to use UUIDField which is
meant for exactly that, rather than an arbitrary CharField.
This requires modifying some tests to use valid uuids.
We now complain if a test author sends a stream message
that does not result in the sender getting a
UserMessage row for the message.
This is basically 100% equivalent to complaining that
the author failed to subscribe the sender to the stream
as part of the test setup, as far as I can tell, so the
AssertionError instructs the author to subscribe the
sender to the stream.
We exempt bots from this check, although it is
plausible we should only exempt the system bots like
the notification bot.
I considered auto-subscribing the sender to the stream,
but that can be a little more expensive than the
current check, and we generally want test setup to be
explicit.
If there is some legitimate way than a subscribed human
sender can't get a UserMessage, then we probably want
an explicit test for that, or we may want to change the
backend to just write a UserMessage row in that
hypothetical situation.
For most tests, including almost all the ones fixed
here, the author just wants their test setup to
realistically reflect normal operation, and often devs
may not realize that Cordelia is not subscribed to
Denmark or not realize that Hamlet is not subscribed to
Scotland.
Some of us don't remember our Shakespeare from high
school, and our stream subscriptions don't even
necessarily reflect which countries the Bard placed his
characters in.
There may also be some legitimate use case where an
author wants to simulate sending a message to an
unsubscribed stream, but for those edge cases, they can
always set allow_unsubscribed_sender to True.
This makes logging more consistent between FCM and APNs codepaths, and
makes clear which user-ids are for local users, and which are opaque
integers namespaced from some remote zulip server.
Being able to determine how many distinct users are getting push
notifications per remote host is useful, as is the distribution of
device counts. This parallels the log line in
handle_push_notification for push notifications from local realms,
handled via the event queue.
aioapns already has a retry loop. By default it retries forever on
ConnectionError and ConnectionClosed, so our own retry loop would
never be reached. Remove our retry loop, and configure aioapns to
retry APNS_MAX_RETRIES times on ConnectionError like the previous
version did. It still retries forever on ConnectionClosed; that’s not
configurable but probably fine.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
These changes are all independent of each other; I just didn’t feel
like making dozens of commits for them.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Previously, we checked for the `enable_offline_email_notifications` and
`enable_offline_push_notifications` settings (which determine whether the
user will receive notifications for PMs and mentions) just before sending
notifications. This has a few problem:
1. We do not have access to all the user settings in the notification
handlers (`handle_missedmessage_emails` and `handle_push_notifications`),
and therefore, we cannot correctly determine whether the notification should
be sent. Checks like the following which existed previously, will, for
example, incorrectly not send notifications even when stream email
notifications are enabled-
```
if not receives_offline_email_notifications(user_profile):
return
```
With this commit, we simply do not enqueue notifications if the "offline"
settings are disabled, which fixes that bug.
Additionally, this also fixes a bug with the "online push notifications"
feature, which was, if someone were to:
* turn off notifications for PMs and mentions (`enable_offline_push_notifications`)
* turn on stream push notifications (`enable_stream_push_notifications`)
* turn on "online push" (`enable_online_push_notifications`)
then, they would still receive notifications for PMs when online.
This isn't how the "online push enabled" feature is supposed to work;
it should only act as a wrapper around the other notification settings.
The buggy code was this in `handle_push_notifications`:
```
if not (
receives_offline_push_notifications(user_profile)
or receives_online_push_notifications(user_profile)
):
return
// send notifications
```
This commit removes that code, and extends our `notification_data.py` logic
to cover this case, along with tests.
2. The name for these settings is slightly misleading. They essentially
talk about "what to send notifications for" (PMs and mentions), and not
"when to send notifications" (offline). This commit improves this condition
by restricting the use of this term only to the database field, and using
clearer names everywhere else. This distinction will be important to have
non-confusing code when we implement multiple options for notifications
in the future as dropdown (never/when offline/when offline or online, etc).
3. We should ideally re-check all notification settings just before the
notifications are sent. This is especially important for email notifications,
which may be sent after a long time after the message was sent. We will
in the future add code to thoroughly re-check settings before sending
notifications in a clean manner, but temporarily not re-checking isn't
a terrible scenario either.
This fixes a batch of mypy errors of the following format:
'Item "None" of "Optional[Something]" has no attribute "abc"
Since we have already been recklessly using these attritbutes
in the tests, adding assertions beforehand is justified presuming
that they oughtn't to be None.
This reduces loose strings in the codebase, and allows us to not worry
about the exact naming (`stream_email_enabled` or `stream_emails_enabled`?)
and tense (`mentioned` or `mention`?).
Ideally this new class should have been in `lib/notification_data.py`,
which is our file for things like this. But, the next commit requires
using this data in `models.py`, and importing from `notification_data.py`
to `models.py` causes recursive imports.
The code to also notify for wildcard mentions was added in
0ed0bb6828.
But that showed the same text for both the cases. This commit fixes
that.
This is more of change for correctness. The mobile app currently does
not rely on this text for notifications, but constructs the text by
itself from the data in the payload.
This also fixes the "stream_push_notify" case to consistently show
a `#` before the stream name.
The previous string was bold, potentially confusing, and doesn't
explain clearly what's happening. We replace this with a string that's
more or less copied from what we do in email notifications with the
similar setting enabled.
It was unclear what the original test was testing, and more
importantly, the test passed even if one removed the `read` flag
check in the `handle_push_notifications` function, so we fix it
to be more comprehensive.
Changed the name of the test-user cordelia from `Cordelia Lear` to
`Cordelia, Lear's daughter`.
This change will enable us to test users with escape characters in
their names.
I also updated the Node, Puppeteer, Backend tests and Fixtures to
support this change.
This commit removes mock.patch with assertLogs().
* Adds return value to do_rest_call() in outgoing_webhook.py, to
support asserting log output in test_outgoing_webhook_system.py.
* Logs are not asserted in test_realm.py because it would require to users
to be queried using users=User.objects.filter(realm=realm) and the order
of resulting queryset varies for each run.
* In test_decorators.py, replacement of mock.patch is not done because
I'm not sure if it's worth the effort to replace it as it's a return
value of a function.
Tweaked by tabbott to set proper mypy types.
This lets the backend tests pass if zilencer has been (manually)
removed from EXTRA_INSTALLED_APPS, by skipping the tests that require
it. test-backend complains that some URLs are untested in this case:
ERROR: Some URLs are untested! Here's the list of untested URLs:
api/v1/users/me/android_gcm_reg_id
api/v1/users/me/apns_device_token
team/
Signed-off-by: Anders Kaseorg <anders@zulip.com>
This issue isn't something a system administrator needs to take action
on -- it's a likely minor logic bug around organization
administrators moving topics between streams.
As a result, it shouldn't send error emails to administrators.
We include tests for the new implementation to avoid churning the
codebase too much so this can be easily reverted when we are able to
re-enable the feature.
If the push_notification for the UserMessage is already active,
we don't send any push notification to the user. This may
happen due to race conditions.
Added and fixed test cases affected by this.
We remove support for the old clients which required an event for
each message to clear notification.
This is justified since it has been around 1.5 years since we started
supporting the bulk operation (and so essentially nobody is using a
mobile app version so old that it doesn't support the batched
approach) and the unbatched approach has a maintenance and reliability
cost.
This makes the system store and track PushDeviceToken objects on
the local Zulip server when using the push notifications bouncer
and includes tests for this.
This is something we need to implement end-to-end encryption for
push notifications. We'll add the encryption key as an additional
property on the local PushDeviceToken object.
It also likely adds some value in the case that a server were to
switch between using the bouncer service and sending notifications
directly, though in practice that's unlikely to happen.
This adds a new function `get_apns_badge_count()` to
fetch count value for a user push notification and
then sends that value with the APNs payload.
Once a message is read from the web app, the count is
decremented accordingly and a push notification with
`event: remove` is sent to the iOS clients.
Fixes#10271.
Mocking `get_base_payload()` verifies the wrong output
when the code is actually correct. So, its better that
we call the real function here, especially when we are
adding the Apple case.
Fixes#2665.
Regenerated by tabbott with `lint --fix` after a rebase and change in
parameters.
Note from tabbott: In a few cases, this converts technical debt in the
form of unsorted imports into different technical debt in the form of
our largest files having very long, ugly import sequences at the
start. I expect this change will increase pressure for us to split
those files, which isn't a bad thing.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Automatically generated by the following script, based on the output
of lint with flake8-comma:
import re
import sys
last_filename = None
last_row = None
lines = []
for msg in sys.stdin:
m = re.match(
r"\x1b\[35mflake8 \|\x1b\[0m \x1b\[1;31m(.+):(\d+):(\d+): (\w+)", msg
)
if m:
filename, row_str, col_str, err = m.groups()
row, col = int(row_str), int(col_str)
if filename == last_filename:
assert last_row != row
else:
if last_filename is not None:
with open(last_filename, "w") as f:
f.writelines(lines)
with open(filename) as f:
lines = f.readlines()
last_filename = filename
last_row = row
line = lines[row - 1]
if err in ["C812", "C815"]:
lines[row - 1] = line[: col - 1] + "," + line[col - 1 :]
elif err in ["C819"]:
assert line[col - 2] == ","
lines[row - 1] = line[: col - 2] + line[col - 1 :].lstrip(" ")
if last_filename is not None:
with open(last_filename, "w") as f:
f.writelines(lines)
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
Generated by pyupgrade --py36-plus --keep-percent-format, but with the
NamedTuple changes reverted (see commit
ba7906a3c6, #15132).
Signed-off-by: Anders Kaseorg <anders@zulip.com>
datetime.timezone is available in Python ≥ 3.2. This also lets us
remove a pytz dependency from the PostgreSQL scripts.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
mock is just a backport of the standard library’s unittest.mock now.
The SAMLAuthBackendTest change is needed because
MagicMock.call_args.args wasn’t introduced until Python
3.8 (https://bugs.python.org/issue21269).
The PROVISION_VERSION bump is skipped because mock is still an
indirect dev requirement via moto.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Generated by `pyupgrade --py3-plus --keep-percent-format` on all our
Python code except `zthumbor` and `zulip-ec2-configure-interfaces`,
followed by manual indentation fixes.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
We try to use the correct variation of `email`
or `delivery_email`, even though in some
databases they are the same.
(To find the differences, I temporarily hacked
populate_db to use different values for email
and delivery_email, and reduced email visibility
in the zulip realm to admins only.)
In places where we want the "normal" realm
behavior of showing emails (and having `email`
be the same as `delivery_email`), we use
the new `reset_emails_in_zulip_realm` helper.
A couple random things:
- I fixed any error messages that were leaking
the wrong email
- a test that claimed to rely on the order
of emails no longer does (we sort user_ids
instead)
- we now use user_ids in some place where we used
to use emails
- for IRC mirrors I just punted and used
`reset_emails_in_zulip_realm` in most places
- for MIT-related tests, I didn't fix email
vs. delivery_email unless it was obvious
I also explicitly reset the realm to a "normal"
realm for a couple tests that I frankly just didn't
have the energy to debug. (Also, we do want some
coverage on the normal case, even though it is
"easier" for tests to pass if you mix up `email`
and `delivery_email`.)
In particular, I just reset data for the analytics
and corporate tests.
We now have this API...
If you really just need to log in
and not do anything with the actual
user:
self.login('hamlet')
If you're gonna use the user in the
rest of the test:
hamlet = self.example_user('hamlet')
self.login_user(hamlet)
If you are specifically testing
email/password logins (used only in 4 places):
self.login_by_email(email, password)
And for failures uses this (used twice):
self.assert_login_failure(email)
This reduces query counts in some cases, since
we no longer need to look up the user again. In
particular, it reduces some noise when we
count queries for O(N)-related tests.
The query count is usually reduced by 2 per
API call. We no longer need to look up Realm
and UserProfile. In most cases we are saving
these lookups for the whole tests, since we
usually already have the `user` objects for
other reasons. In a few places we are simply
moving where that query happens within the
test.
In some places I shorten names like `test_user`
or `user_profile` to just be `user`.
We want a clean codepath for the vast majority
of cases of using api_get/api_post, which now
uses email and which we'll soon convert to
accepting `user` as a parameter.
These apis that take two different types of
values for the same parameter make sweeps
like this kinda painful, and they're pretty
easy to avoid by extracting helpers to do
the actual common tasks. So, for example,
here I still keep a common method to
actually encode the credentials (since
the whole encode/decode business is an
annoying detail that you don't want to fix
in two places):
def encode_credentials(self, identifier: str, api_key: str) -> str:
"""
identifier: Can be an email or a remote server uuid.
"""
credentials = "%s:%s" % (identifier, api_key)
return 'Basic ' + base64.b64encode(credentials.encode('utf-8')).decode('utf-8')
But then the rest of the code has two separate
codepaths.
And for the uuid functions, we no longer have
crufty references to realm. (In fairness, realm
will also go away when we introduce users.)
For the `is_remote_server` helper, I just inlined
it, since it's now only needed in one place, and the
name didn't make total sense anyway, plus it wasn't
a super robust check. In context, it's easier
just to use a comment now to say what we're doing:
# If `role` doesn't look like an email, it might be a uuid.
if settings.ZILENCER_ENABLED and role is not None and '@' not in role:
# do stuff
This commit mostly makes our tests less
noisy, since emails are no longer an important
detail of sending messages (they're not even
really used in the API).
It also sets us up to have more scrutiny
on delivery_email/email in the future
for things that actually matter. (This is
a prep commit for something along those
lines, kind of hard to explain the full
plan.)
Since the intent of our testing code was clearly to clear this cache
for every test, there's no reason for it to be a module-level global.
This allows us to remove an unnecessary import from test_runner.py,
which in combination with DEFAULT_REALM's definition was causing us to
run models code before running migrations inside test-backend.
(That bug, in turn, caused test-backend's check for whether migrations
needs to be run to happen sadly after trying to access a Realm,
trigger a test-backend crash if the Realm model had changed since the
last provision).
We use the plumbing introduced in a previous commit, to now raise
PushNotificationBouncerRetryLaterError in send_to_push_bouncer in case
of issues with talking to the bouncer server. That's a better way of
dealing with the errors than the previous approach of returning a
"failed" boolean, which generally wasn't checked in the code anyway and
did nothing.
The PushNotificationBouncerRetryLaterError exception will be nicely
handled by queue processors to retry sending again, and due to being a
JsonableError, it will also communicate the error to API users.
We add PushNotificationBouncerRetryLaterError as an exception to signal
an error occurred when trying to communicate with the bouncer and it
should be retried. We use JsonableError as the base class, because this
signal will need to work in two roles:
1. When the push notification was being issued by the queue worker
PushNotificationsWorker, it will signal to the worker to requeue the
event and try again later.
2. The exception will also possibly be raised (this will be added in the
next commit) on codepaths coming from a request to an API endpoint (for
example to add a token, to users/me/apns_device_token). In that case,
it'll be needed to provide a good error to the API user - and basing
this exception on JsonableError will allow that.
This includes adding a new endpoint to the push notification bouncer
interface, and code to call it appropriately after resetting a user's
personal API key.
When we add support for a user having multiple API keys, we may need
to add an additional key here to support removing keys associated with
just one client.
The function only used the user's realm anyway, so this is a cleaner
API.
This should also make it more convenient to permanently delete
messages manually, since one doesn't have to fetch a random user in
the realm in order to delete a message using the management shell.
No functional change.
MigrationsTestCase is intentionally omitted from this, since migrations
tests are different in their nature and so whatever setUp()
ZulipTestCase may do in the future, MigrationsTestCase may not
necessarily want to replicate.
One small change in behavior is that this creates an array with all the
row_objects at once, rather than creating them 1000 at a time.
That should be fine, given that the client batches these in units of
10000 anyway, and so we're just creating 10K rows of a relatively
small data structure in Python code here.
Fixes#1727.
With the server down, apply migrations 0245 and 0246. 0246 will remove
the pub_date column, so it's essential that the previous migrations
ran correctly to copy data before running this.
There's no reason for this to be a category of error that emails the
server administrator, since there's a good chance that fixing it will
need to be done in the Zulip codebase, not administrator action.
Historically, Zulip's implementation of wildcard mentions never
triggered either email or push notifications, instead being limited to
desktop notifications and the "mentions" counter.
We fix this just by plumbing the "wildcard_mentioned" flag through our
system.
Implements much of
https://github.com/zulip/zulip/issues/6040#issuecomment-510157264.
We're also now ready to seriously work on #3750.
Previous cleanups (mostly the removals of Python __future__ imports)
were done in a way that introduced leading newlines. Delete leading
newlines from all files, except static/assets/zulip-emoji/NOTICE,
which is a verbatim copy of the Apache 2.0 license.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
This provides a clean warning and 40x error, rather than a 500, for
this corner case which is very likely user error.
The test here is awkward because we have to work around
https://github.com/zulip/zulip/issues/12362.
This contains email of the user to whom notification is being
send. This has not been used in any past mobile releases, so it is
safe to remove it.
As user_id will be stable for the user, but not email. So it's better to
start consuming `user_id` instead of email on mobile.
When a bunch of messages with active notifications are all read at
once -- e.g. by the user choosing to mark all messages, or all in a
stream, as read, or just scrolling quickly through a PM conversation
-- there can be a large batch of this information to convey. Doing it
in a single GCM/FCM message is better for server congestion, and for
the device's battery.
The corresponding client-side logic is in zulip/zulip-mobile#3343 .
Existing clients today only understand one message ID at a time; so
accommodate them by sending individual GCM/FCM messages up to an
arbitrary threshold, with the rest only as a batch.
Also add an explicit test for this logic. The existing tests
that happen to cause this function to run don't exercise the
last condition, so without a new test `--coverage` complains.
Since da8f4bc0e back in August, this control flow has caused
`flags.active_mobile_push_notification` to be cleared if we don't send
these `remove` messages at all, and if we send them directly to GCM...
but not if we send them via the Zulip notification bouncer.
As a result, on a server configured to send `remove` notification-messages
via the bouncer, we accumulate "active" messages and never clear them.
If the user then does `mark_all_as_read`, we end up sending a `remove`
for each of those messages again, and all in one giant burst. We've
seen puzzling bursts of hundreds of removals pass through the bouncer
since turning on removals on chat.zulip.org; it's likely many of them
are caused by this bug.
This issue was made more acute with f4478aad5, which unconditionally
enabled removals.
Test added by tabbott.
The client-side fix to make these not a problem was in release
16.2.96, of 2018-08-22. We've been sending them from the
development community server chat.zulip.org since 2018-11-29.
We started forcing clients to upgrade with commit fb7bfbe9a,
deployed 2018-12-05 to zulipchat.com.
(The mobile app unconditionally makes a request to a route on
zulipchat.com to check for this kind of forced upgrade, so that
applies to mobile users of any Zulip server.)
So at this point it's long past safe for us to unconditionally
send these. Hardwire the old `SEND_REMOVE_PUSH_NOTIFICATIONS`
setting to True, and simplify it out.
I was hoping this would make things faster... it does, but sadly only
by about 70ms, 5% of this file's test runtime.
It sure does make this file rather less action-at-a-distance, though,
as well as fixing some duplication.
If we make a practice on the Zulip server of always explicitly setting
the desired priority, then when an old server doesn't set the priority
we can reasonably have the bouncer make a guess.
That is, this allows a Zulip server to now set the `priority`; but if
it doesn't, we use upstream's default value, which has the same effect
as we've always previously had by not setting it at all.
But when this is deployed to the push notifications bouncer server, it
does allow another server to set priority when pushing notifications
through the bouncer.
This adds a new API for sending basic analytics data (number of users,
number of messages sent) from a Zulip server to the Zulip Cloud
central analytics database, which will make it possible for servers to
elect to have their usage numbers counted in published stats on the
size of the Zulip ecosystem.
This checks if push_notification_enabled() is set to false in
handle_push_notification and adds an early return statement.
This is a significant performance optimization for our unit tests
because the push notifications code path does a number of database
queries, and this migration means we don't end up doing those queries
the hundreds of times we send PMs or mentions in our tests where we're
not trying to test the push notifications functionality.
This should also have a small message sending scalability improvement
for any Zulip servers without push notifications enabled.
Tweaked by tabbott to fix a few small issues.
Fixes#10895.
While reviewing #11012, I discovered a nondeterministic result for
test_signup, which I tracked down to specifically this triple of tests
failing when run in this order:
test-backend GCMSuccessTest \
zerver.tests.test_push_notifications.TestAPNs.test_get_apns_client \
zerver.tests.test_signup.LoginTest.test_register
with a query count mismatch like this:
expected length: 73
actual length: 79
Comparing the list of queries, it's clear that test_register was
seeing `push_notifications_enabled()` returning True in this test order.
It's not clear why GCMSuccessTest was required here (it was!), but
further debugging determined the problem was that
`test_get_apns_client` left the _apns_client initialization system in
a state where get_apns_client would return a non-None value, resulting
in push_notifications_enabled() returning True for future tests.
The immediate fix is to just reset the `_apns_client` and
`_apns_client_initializedstate` state properly after the test runs;
but arguably we should do a larger refactor to make this less
fragile.
If a user deletes message between when it triggered a potential push
notification for another user, and when that notification was actually
sent, we'd end up with a situation where the `Message` table didn't
have an entry for the requested message ID.
The clean fix for this is to still throw an exception in the event
that the message doesn't exist at all, but if it exists in
ArchivedMessage, don't throw a user-facing exception.
Prakhar Pratyush
Lauryn Menard
Zixuan Li
Anders Kaseorg
Zixuan James Li
Mateusz Mandera
madrix01
Zixuan James Li
Alex Vandiver
Steve Howell
Eeshan Garg
Tim Abbott
Abhijeet Prasad Bodas
Dinesh
Vishnu KS
Hashir Sarwar
akshatdalton
Arun Sankar
m-e-l-u-h-a-n
palash
Mohit Gupta
Aman Agrawal
Anders Kaseorg
Stefan Weil
Steve Howell
Tim Abbott
Mateusz Mandera
Rishi Gupta
Wyatt Hoodes
Rohitt Vashishtha
okmanl
Vishwesh Jainkuniya
Greg Price
Anders Kaseorg
kunal-mohta
ishanrai05