The `unless` step errors out if /usr/bin/psql does not exist at
first evaluation time -- protect that with a `test -f` check, and
protect the actual `createuser` with a dependency on `postgresql-client`.
To work around `Zulip::Safepackage` not actually being safe to
instantiate more than once, we move the instantiation of
`Package[postgresql-client]` into a class which can be safely
included one or more times.
Restore the default django.utils.log.AdminEmailHandler when
ERROR_REPORTING is enabled. Those with more sophisticated needs can
turn it off and use Sentry or a Sentry-compatible system.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
When upgraded, the `erlang-base` package automatically stops all
services which depend on the Erlang runtime; for Zulip, this is the
`rabbitmq-server` service. This results in an unexpected outage of
Zulip.
Block unattended upgrades of the `erlang-base` package.
Since backups may now taken on arbitrary hosts, we need a blackbox
monitor that _some_ backup was produced.
Add a Prometheus exporter which calls `wal-g backup-list` and reports
statistics about the backups.
This could be extended to include `wal-g wal-verify`, but that
requires a connection to the PostgreSQL server.
7c023042cf moved the logrotate configuration to being a templated
file, from a static file, but missed that the static file was still
referenced from `zulip_ops::app_frontend`; it only updated
`zulip::profile::app_frontend`. This caused errors in applying puppet
on any `zulip_ops::app_frontend` host.
Prior to 7c023042cf, the Puppet role was identical between those two
classes; deduplicate the rule by moving the updated template
definition into `zulip::app_frontend_base` which is common to those
two classes and not used in any other classes.
Following zulip/python-zulip-api/pull/758/, we're no longer using
python-zephyr, and don't need to build it from source. Additionally,
we no longer need to build a forked Zephyr package, since ZLoadSession
and ZDumpSession were merged in
e6a545e759.
To not change the `supervisor.conf` file, which requires a restart of
supervisor (and thus all services running under it, which is extremely
disruptive) we carefully leave the contents unchanged for most
installs, and append a new piece to the file, only for the zmirror
configuration, using `concat`.
There is no reason that the base node access method should be run
under supervisor, which exists primarily to give access to the `zulip`
user to restart its managed services. This access is unnecessary for
Teleport, and also causes unwanted restarts of Teleport services when
the `supervisor` base configuration changes. Additionally,
supervisor does not support the in-place upgrade process that Teleport
uses, as it replaces its core process with a new one.
Switch to installing a systemd configuration file (as generated by
`teleport install systemd`) for each part of Teleport, customized to
pass a `--config` path. As such, we explicitly disable the `teleport`
service provided by the package.
The supervisor process is shut down by dint of no longer installing
the file, which purges it from the managed directory, and reloads
Supervisor to pick up the removed service.
Puppet _always_ sets the `+x` bit on directories if they have the `r`
bit set for that slot[^1]:
> When specifying numeric permissions for directories, Puppet sets the
> search permission wherever the read permission is set.
As such, for instance, `0640` is actually applied as `0750`.
Fix what we "want" to match what puppet is applying, by adding the `x`
bit. In none of these cases did we actually intend the directory to
not be executable.
[1] https://www.puppet.com/docs/puppet/5.5/types/file.html#file-attribute-mode
This was last really used in d7a3570c7e, in 2013, when it was
`/home/humbug/logs`.
Repoint the one obscure piece of tooling that writes there, and remove
the places that created it.
When file uploads are stored in S3, this means that Zulip serves as a
302 to S3. Because browsers do not cache redirects, this means that
no image contents can be cached -- and upon every page load or reload,
every recently-posted image must be re-fetched. This incurs extra
load on the Zulip server, as well as potentially excessive bandwidth
usage from S3, and on the client's connection.
Switch to fetching the content from S3 in nginx, and serving the
content from nginx. These have `Cache-control: private, immutable`
headers set on the response, allowing browsers to cache them locally.
Because nginx fetching from S3 can be slow, and requests for uploads
will generally be bunched around when a message containing them are
first posted, we instruct nginx to cache the contents locally. This
is safe because uploaded file contents are immutable; access control
is still mediated by Django. The nginx cache key is the URL without
query parameters, as those parameters include a time-limited signed
authentication parameter which lets nginx fetch the non-public file.
This adds a number of nginx-level configuration parameters to control
the caching which nginx performs, including the amount of in-memory
index for he cache, the maximum storage of the cache on disk, and how
long data is retained in the cache. The currently-chosen figures are
reasonable for small to medium deployments.
The most notable effect of this change is in allowing browsers to
cache uploaded image content; however, while there will be many fewer
requests, it also has an improvement on request latency. The
following tests were done with a non-AWS client in SFO, a server and
S3 storage in us-east-1, and with 100 requests after 10 requests of
warm-up (to fill the nginx cache). The mean and standard deviation
are shown.
| | Redirect to S3 | Caching proxy, hot | Caching proxy, cold |
| ----------------- | ------------------- | ------------------- | ------------------- |
| Time in Django | 263.0 ms ± 28.3 ms | 258.0 ms ± 12.3 ms | 258.0 ms ± 12.3 ms |
| Small file (842b) | 586.1 ms ± 21.1 ms | 266.1 ms ± 67.4 ms | 288.6 ms ± 17.7 ms |
| Large file (660k) | 959.6 ms ± 137.9 ms | 609.5 ms ± 13.0 ms | 648.1 ms ± 43.2 ms |
The hot-cache performance is faster for both large and small files,
since it saves the client the time having to make a second request to
a separate host. This performance improvement remains at least 100ms
even if the client is on the same coast as the server.
Cold nginx caches are only slightly slower than hot caches, because
VPC access to S3 endpoints is extremely fast (assuming it is in the
same region as the host), and nginx can pool connections to S3 and
reuse them.
However, all of the 648ms taken to serve a cold-cache large file is
occupied in nginx, as opposed to the only 263ms which was spent in
nginx when using redirects to S3. This means that to overall spend
less time responding to uploaded-file requests in nginx, clients will
need to find files in their local cache, and skip making an
uploaded-file request, at least 60% of the time. Modeling shows a
reduction in the number of client requests by about 70% - 80%.
The `Content-Disposition` header logic can now also be entirely shared
with the local-file codepath, as can the `url_only` path used by
mobile clients. While we could provide the direct-to-S3 temporary
signed URL to mobile clients, we choose to provide the
served-from-Zulip signed URL, to better control caching headers on it,
and greater consistency. In doing so, we adjust the salt used for the
URL; since these URLs are only valid for 60s, the effect of this salt
change is minimal.
‘exit’ is pulled in for the interactive interpreter as a side effect
of the site module; this can be disabled with python -S and shouldn’t
be relied on.
Also, use the NoReturn type where appropriate.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
A number of autossh connections are already left open for
port-forwarding Munin ports; autossh starts the connections and
ensures that they are automatically restarted if they are severed.
However, this represents a missed opportunity. Nagios's monitoring
uses a large number of SSH connections to the remote hosts to run
commands on them; each of these connections requires doing a complete
SSH handshake and authentication, which can have non-trivial network
latency, particularly for hosts which may be located far away, in a
network topology sense (up to 1s for a no-op command!).
Use OpenSSH's ability to multiplex multiple connections over a single
socket, to reuse the already-established connection. We leave an
explicit `ControlMaster no` in the general configuration, and not
`auto`, as we do not wish any of the short-lived Nagios connections to
get promoted to being a control socket if the autossh is not running
for some reason.
We enable protocol-level keepalives, to give a better chance of the
socket being kept open.
https://nginx.org/en/docs/http/ngx_http_map_module.html
Since Puppet doesn’t manage the contents of nginx_sharding.conf after
its initial creation, it needs to be renamed so we can give it
different default contents.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
The `needrestart` tool added in 22.04 is useful in terms of listing
which services may need to be restarted to pick up updated libraries.
However, it prompts about the current state of services needing
restart for *every* subsequent `apt-get upgrade`, and defaulting core
services to restarting requires carefully manually excluding them
every time, at risk of causing an unscheduled outage.
Build a list of default-off services based on the list in
unattended-upgrades.
This check loads Django, and as such must be run as the zulip user.
Repeat the same pattern used elsewhere in nagios, of writing a state
file, which is read by `check_cron_file`.
Alex Vandiver
Anders Kaseorg
Tim Abbott