This commit changes the assignee info to the correct one.
Earlier, the current assignee info of the issue was used
to create the message but when an issue was unassigned
this would give incorrect information if there are still
assignees left on the issue. Now, it uses the details of
the user who has been unassigned from the issue.
This commit removes the description from the Issue Assigned
event message that is sent by the Github Integration.
Previously when an issue was assigned, the message also had the
description of the issue, which is redundant as the description
has been already sent through the issue created event. After
this commit, the description no longer appears in the message.
Fixes#24554
This commit passes the body of the PR Review as the message to
the helper function that generates the message to be sent by the
GitHub Integration.
Previously when a PR Review was done the message sent would just
include the link of the review but the message didn't include the
body the review. After this commit, the message also includes the
body of the review.
Fixes#24676
Previously, the assignee message would stick around in the middle of the
event message. This doesn't look as good as if we put it to the end of
the event message. These changes does just that and move the assignee
messages towards the end of the event message to make it look better
and cleaner for the readers.
Previously, some call sites for the function provided optional
arguments as positional arguments. These changes will allow the
arguments to be passed as keyword arguments to the function and
fix up the call sites of the function to pass keyword arguments
instead.
Previously, some call sites for the function provided optional
arguments as positional arguments. These changes will allow the
arguments to be passed as keyword arguments to the function and
fix up the call sites of the function to pass keyword arguments
instead.
Previously when Github bot receives an update pull request event,it
will produce the following message:
user updated PR #1 Start writing unit tests from test to main
"from test to main" is improper and causes unnecessary confusion.
These changes will update the logic to remove the phrase from
update events. These changes will also include the org: prefix to
the branch names to keep it consistent with Github and further
reduce confusions on branch names.
Fixes#24536.
The list of supported events for filtering itself does not document what
each of the events does. Adding a link to GitHub's documentation would
be a pointer to get people started. But ideally we need to establish a
better system to document the events in general.
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
This unifies the length of the shortened SHA our integrations generate,
and ensures that they are long enough for projects of various sizes with
a chosen value defined in get_short_sha.
Fixes#23475
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
7 characters are not enough for large projects, so we change
it to reasonably longer. As an example, The Linux kernel needs
at least 11 characters of sha in its shortened form to identify
a revision. We pick 11 so it should work for most of the projects.
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
markdown-include is GPL licensed.
Also, rewrite it as a block processor, so that it works correctly
inside indented blocks.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Adds request as a parameter to json_success as a refactor towards
making `ignored_parameters_unsupported` functionality available
for all API endpoints.
Also, removes any data parameters that are an empty dict or
a dict with the generic success response values.
We recently ran into a payload in production that didn't contain
an event type at all. A payload where we can't figure out the event
type is quite rare. Instead of letting these payloads run amok, we
should raise a more informative exception for such unusual payloads.
If we encounter too many of these, then we can choose to conduct a
deeper investigation on a case-by-case basis.
With some changes by Tim Abbott.
We add discussion id and url in the comments and highlighted title to
the body of disscussion message to make it more meaningful and accessible.
Fixes#19938.
We aim to use Zulip topics thoughtfully in displaying messages from
discussions, as well as linking to the discussion in every message so
that it's easy to view them.
Fixes#19938.
Since FIXTURE_DIR_NAME is the name of the folder that contains the view
and tests modules of the webhook and another folder called "fixtures" that
store the fixtures, it is more appropriate to call it WEBHOOK_DIR_NAME,
especially when we want to refer to the view module using this variable.
Move `get_setup_webhook_message` to
`zerver/lib/webhooks/common.py` so multiple integrations can use this
rather than just those which import `zerver/lib/webhooks/git.py`. Also
added the documentation for this.
I have added a documentation page for the GitHub Actions integration to
`/integrations/doc/github-actions` with a link to the Zulip GitHub
Actions repository.
Tweaked by tabbott to add cross-links with the main GitHub integration.
This change updates the GitHub Integration webhook
get_opened_or_update_pull_request_body method so that
the description is only printed if it actually changes.
If the update event is a result of some other
attribute update, such as an asignee change, then the
description is not included in the message sent to
the zulip stream.
Fixes#16345
This clears it out of the data sent to Sentry, where it is duplicative
with the indexed metadata -- and potentially exposes PHI if Sentry's
"make this issue public" feature is used.
Any exception is an "unexpected event", which means talking about
having an "unexpected event logger" or "unexpected event exception" is
confusing. As the error message in `exceptions.py` already explains,
this is about an _unsupported_ event type.
This also switches the path that these exceptions are written to,
accordingly.
8e10ab282a moved UnexpectedWebhookEventType into
`zerver.lib.exceptions`, but left the import into
`zserver.lib.webhooks.common` so that webhooks could continue to
import the exception from there.
This clutters things and adds complexity; there is no compelling
reason that the exception's source of truth should not move alongside
all other exceptions.
If there are unsupported keys, we still log an error,
but we now also send a message to the stream. (This
is a good tradeoff for the github webhook, since users
can just turn off notifications if they find it spammy.
Also, we intend to support "repository" soon.)
This is a bit of an experiment to see how this plays
in the field:
* will customers notice the change?
* will Sentry reports look any different?
The main thing fixed here is that we weren't turning
on our keys into a list. And then I refined the message
a bit more, including sorting the keys.
I also avoid the unnecessary "else".
The EVENT_FUNCTION_MAPPER maps a string event name
to a function handler. Before this we circumvented
mypy checks with a call to get_body_function_based_on_type,
which specified Any as the type of our event function.
Now the types are rigorous.
This change was impossible without the recent commit
to introduce the Helper class.
The Helper class will soon grow, but the immediate
problem it solves is the need to jankily inspect
the parameters of our get_*_body function.
Most of the changes were handled by an ad hoc
munge.py script.
The substantive changes were adding the Helper
class and passing it in.
And then the linter discovered a place where
the optional include_title parameter wasn't used
(which is one of the reasons to avoid the janky
inspect-signature technique).
As a side note, none of the include_title parameters
needed a default value of False, as we always passed
in an explicit value.
We test cover both sides of include_title, which
you can verify by hard coding it to either True or
False (and seeing the relevant failures), although I
suspect most individual codepaths
only test one value, based on whether "topic" is in
the fixture or not.
Finally, I know Helper is not a great name, but I
intend to evolve the class a bit before deciding
whether a more descriptive name is helpful here.
(For example, an upcoming commit will add a
log_unexpected helper method.)
We get the header_event one level up the call
stack now, too.
It's somewhat annoying that we have our own
concept of "event" here, instead of just returning
our event handlers directly, or just calling them
directly, but it's a bit non-trivial to fix that
right away.
In passing, I remove the strange OR for "ping",
which is already a key in EVENT_FUNCTION_MAPPER.
See https://github.com/zulip/zulip/issues/16258 for
possible follow up here.
We now ignore the following two new pull_request
actions (as well as the three existing ones
from before):
approved
converted_to_draft
As the issue above indicates, we may want to actually
support "approved" if we can find somebody to work
on the webhook. (And then the issue goes a little
broader than what changed here.)
We consolidate the tests and remove the fixtures, which
just have a lot of noisy fields that we ignore. Also,
pull_request__request_review_removed was named improperly.
Almost all webhook tests use this helper, except a few
webhooks that write to private streams.
Being concise is important here, and the name
`self.send_and_test_stream_message` always confused
me, since it sounds you're sending a stream message,
and it leaves out the webhook piece.
We should consider renaming `send_and_test_private_message`
to something like `check_webhook_private`, but I couldn't
decide on a great name, and it's very rarely used. So
for now I just made sure the docstrings of the two
sibling functions reference each other.
The "EXPECTED_" prefix and "_EVENTS" suffix
usually provided more noise than signal.
We also use module constants to avoid the "self."
noise. It also makes it a bit more clear which
constants actually have to be in the class (e.g.
"FIXTURE_DIR_NAME") to do their job.
This changes the notification messages for events that currently just
include the string `"the repository"` to also include the full (`org/repo`)
name of the affected repository. Messages for the following events are
changed:
- `public`
- `star`
- `watch`
- `repository`
- `team_add`
Background: we're using the GitHub integration for org-wide notifications
for the [Bytecode Alliance Zulip](bytecodealliance.zulipchat.com/), and
having all messages just say "the repository" isn't ideal. Even now one
can hover over the link to see the repo's url, but it'd be much nicer if
the message just contained the full name.
I also changed the message for `star` to include a link to the repository,
same as the `watch` notification.
There seems to have been a confusion between two different uses of the
word “optional”:
• An optional parameter may be omitted and replaced with a default
value.
• An Optional type has None as a possible value.
Sometimes an optional parameter has a default value of None, or None
is otherwise a meaningful value to provide, in which case it makes
sense for the optional parameter to have an Optional type. But in
other cases, optional parameters should not have Optional type. Fix
them.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Fixes#2665.
Regenerated by tabbott with `lint --fix` after a rebase and change in
parameters.
Note from tabbott: In a few cases, this converts technical debt in the
form of unsorted imports into different technical debt in the form of
our largest files having very long, ugly import sequences at the
start. I expect this change will increase pressure for us to split
those files, which isn't a bad thing.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Automatically generated by the following script, based on the output
of lint with flake8-comma:
import re
import sys
last_filename = None
last_row = None
lines = []
for msg in sys.stdin:
m = re.match(
r"\x1b\[35mflake8 \|\x1b\[0m \x1b\[1;31m(.+):(\d+):(\d+): (\w+)", msg
)
if m:
filename, row_str, col_str, err = m.groups()
row, col = int(row_str), int(col_str)
if filename == last_filename:
assert last_row != row
else:
if last_filename is not None:
with open(last_filename, "w") as f:
f.writelines(lines)
with open(filename) as f:
lines = f.readlines()
last_filename = filename
last_row = row
line = lines[row - 1]
if err in ["C812", "C815"]:
lines[row - 1] = line[: col - 1] + "," + line[col - 1 :]
elif err in ["C819"]:
assert line[col - 2] == ","
lines[row - 1] = line[: col - 2] + line[col - 1 :].lstrip(" ")
if last_filename is not None:
with open(last_filename, "w") as f:
f.writelines(lines)
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
Generated by pyupgrade --py36-plus --keep-percent-format, but with the
NamedTuple changes reverted (see commit
ba7906a3c6, #15132).
Signed-off-by: Anders Kaseorg <anders@zulip.com>
mock is just a backport of the standard library’s unittest.mock now.
The SAMLAuthBackendTest change is needed because
MagicMock.call_args.args wasn’t introduced until Python
3.8 (https://bugs.python.org/issue21269).
The PROVISION_VERSION bump is skipped because mock is still an
indirect dev requirement via moto.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Use get_release_event_message from webhooks/git.py to format release
events using the newly implemented release message template.
Tweaked by tabbott to handle name=None.
Builds on #14746. Proposed in #14934.
GitHub supports opening a draft/WIP pull request and then marking it
as ready for review later on. This PR supports the ready_for_review
action for pull_request events.
Signed-off-by: Hemanth V. Alluri <hdrive1999@gmail.com>
Generated by `pyupgrade --py3-plus --keep-percent-format` on all our
Python code except `zthumbor` and `zulip-ec2-configure-interfaces`,
followed by manual indentation fixes.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
Then, find and fix a predictable number of previous misuses.
With a small change by tabbott to preserve backwards compatibility for
sending `yes` for the `forged` field.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
For storing HTTP headers as a function of fixture name, previously
we required that the fixture_to_headers method should reside in a
separate module called headers.py.
However, as in many cases, this method will only take a few lines,
we decided to move this function into the view.py file of the
integration instead of requiring a whole new file called headers.py
This commit introduces the small change in the system architecture,
migrates the GitHub integration, and updates the docs accordingly.
In the GitHub integration we established that for many integrations,
we can directly map the fixture filename to the set of required
headers and by following a simple naming convention we can greatly
ease the logic involved in fixture_to_headers method required .
So to prevent the need for duplicating the logic used by the GitHub
integration, we created a method called `get_http_headers_from_filename`
which will take the name of the HTTP header (key) and then return a
corresponding method (in a decorator-like fashion) which could then be
equated to fixture_to_headers in headers.py.
The GitHub integration was modified to use this method and the docs
were updated to suggest using this when possible.
According to GitHub's webhook docs, the scope of a membership
event can only be limited to 'teams', which holds true when a
new member is added to a team. However, we just found a payload
in our logs that indicates that when a user is removed from a
team, the scope of the membership is erroneously set to
'organization', not 'team'. This is most likely a bug on
GitHub's end because such behaviour is a direct violation of
their webhook API event specifications. We account for this
by restricting membership events to teams explicitly, at least
till GitHub's docs suggest otherwise.
A check suite is a collection of check runs. We care a lot more
about the outcomes of check runs in this case because check_run
payloads are a lot more informative than check_suite payloads.
(And in any case, the check_suite events are primarily for notifying
tools like CI to run checks).
We only support notifications for events where a check run has
completed. Notifications for when a check run has been queued or
is in progress are not very informative and may be too noisy.
The payloads for this event are missing some important details
about the Project's changes, such as the name of the project,
the card's column name, etc. Without such details, the resultant
notifications would not be useful at all!
Satyam Bansal
Joelute
Zixuan James Li
Anders Kaseorg
Christopher Chong
Lauryn Menard
Eeshan Garg
Shlok Patel
PIG208
Adam Birds
Tushar Upadhyay
cozyrohan
Alex Vandiver
Steve Howell
Till Schneidereit
Anders Kaseorg
Hemanth V. Alluri
cestrell
Puneeth Chaganti
Stefan Weil
Sourabh Singh
Tim Abbott
Brutus5000
Eeshan Garg