stop-server and restart-server address all services which talk to the
database, and are thus more correct than restarting or stopping
everything in supervisor.
This is possible now that the previous commit ensures that the zulip
user can read the zulip installation directory during
`create-database`; previously, that directory was still owned by root
when `create-database` was run, whereas now it is in
`~zulip/deployments/`.
rabbitmqctl ping only checks that the Erlang process is registered
with epmd. There’s a window after that where the rabbit app is still
starting inside it.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
This was not needed for OpenSSL ≥ 1.1.1 (all our supported platforms),
and breaks with OpenSSL ≥ 3.0.0 (Ubuntu 22.04). It was removed from
the upstream configuration file too: https://bugs.debian.org/990228.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
The RabbitMQ docs state ([1]):
RabbitMQ nodes and CLI tools (e.g. rabbitmqctl) use a cookie to
determine whether they are allowed to communicate with each
other. [...] The cookie is just a string of alphanumeric
characters up to 255 characters in size. It is usually stored in a
local file.
...and goes on to state (emphasis ours):
If the file does not exist, Erlang VM will try to create one with
a randomly generated value when the RabbitMQ server starts
up. Using such generated cookie files are **appropriate in
development environments only.**
The auto-generated cookie does not use cryptographic sources of
randomness, and generates 20 characters of `[A-Z]`. Because of a
semi-predictable seed, the entropy of this password is thus less than
the idealized 26^20 = 94 bits of entropy; in actuality, it is 36 bits
of entropy, or potentially as low as 20 if the performance of the
server is known.
These sizes are well within the scope of remote brute-force attacks.
On provision, install, and upgrade, replace the default insecure
20-character Erlang cookie with a cryptographically secure
255-character string (the max length allowed).
[1] https://www.rabbitmq.com/clustering.html#erlang-cookie
This reverts commit 889547ff5e. It is
unused in the Docker container, as the configurtaion of the `zulip`
user in the rabbitmq node is done via environment variables. The
Zulip host in that context does not have `rabbitmqctl` installed, and
would have needed to know the Erlang cookie to be able to run these
commands.
As a consequence:
• Bump minimum supported Python version to 3.7.
• Move Vagrant environment to Debian 10, which has Python 3.7.
• Move CI frontend tests to Debian 10.
• Move production build test to Debian 10.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
This catches nine functional indexes that the previous query didn’t:
upper_preregistration_email_idx
upper_stream_name_idx
upper_subject_idx
upper_userprofile_email_idx
zerver_message_recipient_upper_subject
zerver_mutedtopic_stream_topic
zerver_stream_realm_id_name_uniq
zerver_userprofile_realm_id_delivery_email_uniq
zerver_userprofile_realm_id_email_uniq
Signed-off-by: Anders Kaseorg <anders@zulip.com>
If nginx was already installed, and we're using the webroot method of
initializing certbot, nginx needs to be reloaded. Hooks in
`/etc/letsencrypt/renewal-hooks/deploy/` do not run during initial
`certbot certonly`, so an explicit reload is required.
The certbot package installs its own systemd timer (and cron job,
which disabled itself if systemd is enabled) which updates
certificates. This process races with the cron job which Zulip
installs -- the only difference being that Zulip respects the
`certbot.auto_renew` setting, and that it passes the deploy hook.
This means that occasionally nginx would not be reloaded, when the
systemd timer caught the expiration first.
Remove the custom cron job and `certbot-maybe-renew` script, and
reconfigure certbot to always reload nginx after deploying, using
certbot directory hooks.
Since `certbot.auto_renew` can't have an effect, remove the setting.
In turn, this removes the need for `--no-zulip-conf` to
`setup-certbot`. `--deploy-hook` is similarly removed, as running
deploy hooks to restart nginx is now the default; pass
`--no-directory-hooks` in standalone mode to not attempt to reload
nginx. The other property of `--deploy-hook`, of skipping symlinking
into place, is given its own flog.
The `analyze_new_cluster.sh` script output by `pg_upgrade` just runs
`vacuumdb --all --analyze-in-stages`, which runs three passes over the
database, getting better stats each time. Each of these passes is
independent; the third pass does not require the first two.
`--analyze-in-stages` is only provided to get "something" into the
database, on the theory that it could then be started and used. Since
we wait for all three passes to complete before starting the database,
the first two passes add no value.
Additionally, PosttgreSQL 14 and up stop writing the
`analyze_new_cluster.sh` script as part of `pg_upgrade`, suggesting
the equivalent `vacuumdb --all --analyze-in-stages` call instead.
Switch to explicitly call `vacuumdb --all --analyze-only`, since we do
not gain any benefit from `--analyze-in-stages`. We also enable
parallelism, with `--jobs 10`, in order to analyze up to 10 tables in
parallel. This may increase load, but will accelerate the upgrade
process.
We previously used `zulip-puppet-apply` with a custom config file,
with an updated PostgreSQL version but more limited set of
`puppet_classes`, to pre-create the basic settings for the new cluster
before running `pg_upgradecluster`.
Unfortunately, the supervisor config uses `purge => true` to remove
all SUPERVISOR configuration files that are not included in the puppet
configuration; this leads to it removing all other supervisor
processes during the upgrade, only to add them back and start them
during the second `zulip-puppet-apply`.
It also leads to `process-fts-updates` not being started after the
upgrade completes; this is the one supervisor config file which was
not removed and re-added, and thus the one that is not re-started due
to having been re-added. This was not detected in CI because CI added
a `start-server` command which was not in the upgrade documentation.
Set a custom facter fact that prevents the `purge` behaviour of the
supervisor configuration. We want to preserve that behaviour in
general, and using `zulip-puppet-apply` continues to be the best way
to pre-set-up the PostgreSQL configuration -- but we wish to avoid
that behaviour when we know we are applying a subset of the puppet
classes.
Since supervisor configs are no longer removed and re-added, this
requires an explicit start-server step in the instructions after the
upgrades complete. This brings the documentation into alignment with
what CI is testing.
These changes are all independent of each other; I just didn’t feel
like making dozens of commits for them.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
For our marketing emails, we want a width that's more appropriate for
newsletter context, vs. the narrow emails we use for transactional
content.
I haven't figured out a cleaner way to do this than duplicating most
of email_base_default.source.html. But it's not a big deal to
duplicate, since we've been changing that base template only about
once a year.
The script is added to upgrade steps for 20.04 and Buster because
those are the upgrades that cross glibc 2.28, which is most
problematic. It will also be called out in the upgrade notes, to
catch those that have already done that upgrade.
This moves the `.asc` files into subdirectories, and writes out the
according `.list` files into them. It moves from templates to
written-out `.list` files for clarity and ease of
implementation (Debian and Ubuntu need different templates for
`zulip`), and as a way of making explicit which releases are supported
for each list. For the special-case of the PGroonga signing key, we
source an additional file within the directory.
This simplifies the process for adding another class of `.list` file.
This adds basic support for `postgresql.database_user` and
`postgresql.database_name` settings in `zulip.conf`; the defaults if
unspecified are left as `zulip`.
Co-authored-by: Adam Birds <adam.birds@adbwebdesigns.co.uk>
This reverts part of commit 476524c0c1
(#18215), to fix this error when running the installer from a
directory that isn’t world-readable:
+ '[' -e /var/run/supervisor.sock ']'
+++ dirname /root/zulip-server-4.1/scripts/setup/postgresql-init-db
++ dirname /root/zulip-server-4.1/scripts/setup
+ su zulip -c /root/zulip-server-4.1/scripts/stop-server
bash: /root/zulip-server-4.1/scripts/stop-server: Permission denied
Zulip installation failed (exit code 126)!
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Thumbor and tc-aws have been dragging their feet on Python 3 support
for years, and even the alphas and unofficial forks we’ve been running
don’t seem to be maintained anymore. Depending on these projects is
no longer viable for us.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
The `en_US.UTF-8` locale may not be configured or generated on all
installs; it also requires that the `locales` package be installed.
If users generate the `en_US.UTF-8` locale without adding it to the
permanent set of system locales, the generated `en_US.UTF-8` stops
working when the `locales` package is updated.
Switch to using `C.UTF-8` in all cases, which is guaranteed to be
installed.
Fixes#15819.
This hits the unauthenticated Github API to get the list of tags,
which is rate-limited to 60 requests per hour. This means that the
tool can only be run 60 times per hour before it starts to exit with
errors, but that seems like a reasonable limit for the moment.
Using `supervisorctl stop all` to stop the server is not terribly
discoverable, and may stop services which are not part of Zulip
proper.
Add an explicit tool which only stops the relevant services. It also
more carefully controls the order in which services are stopped to
minimize lost requests, and maximally quiesce the server.
Locations which may be stopping _older_ versions of Zulip (without
this script) are left with using `supervisorctl stop all`.
Fixes#14959.
Alex Vandiver
Anders Kaseorg
Tim Abbott