Also enable warn_unused_ignores. I think the fact that there are so
few of these is good evidence that it’s not a significant burden for
people fixing type errors.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
There seems to have been a confusion between two different uses of the
word “optional”:
• An optional parameter may be omitted and replaced with a default
value.
• An Optional type has None as a possible value.
Sometimes an optional parameter has a default value of None, or None
is otherwise a meaningful value to provide, in which case it makes
sense for the optional parameter to have an Optional type. But in
other cases, optional parameters should not have Optional type. Fix
them.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Fixes#2665.
Regenerated by tabbott with `lint --fix` after a rebase and change in
parameters.
Note from tabbott: In a few cases, this converts technical debt in the
form of unsorted imports into different technical debt in the form of
our largest files having very long, ugly import sequences at the
start. I expect this change will increase pressure for us to split
those files, which isn't a bad thing.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Automatically generated by the following script, based on the output
of lint with flake8-comma:
import re
import sys
last_filename = None
last_row = None
lines = []
for msg in sys.stdin:
m = re.match(
r"\x1b\[35mflake8 \|\x1b\[0m \x1b\[1;31m(.+):(\d+):(\d+): (\w+)", msg
)
if m:
filename, row_str, col_str, err = m.groups()
row, col = int(row_str), int(col_str)
if filename == last_filename:
assert last_row != row
else:
if last_filename is not None:
with open(last_filename, "w") as f:
f.writelines(lines)
with open(filename) as f:
lines = f.readlines()
last_filename = filename
last_row = row
line = lines[row - 1]
if err in ["C812", "C815"]:
lines[row - 1] = line[: col - 1] + "," + line[col - 1 :]
elif err in ["C819"]:
assert line[col - 2] == ","
lines[row - 1] = line[: col - 2] + line[col - 1 :].lstrip(" ")
if last_filename is not None:
with open(last_filename, "w") as f:
f.writelines(lines)
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
Generated by pyupgrade --py36-plus --keep-percent-format, but with the
NamedTuple changes reverted (see commit
ba7906a3c6, #15132).
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Generated by autopep8, with the setup.cfg configuration from #14532.
I’m not sure why pycodestyle didn’t already flag these.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
Generated by `pyupgrade --py3-plus --keep-percent-format` on all our
Python code except `zthumbor` and `zulip-ec2-configure-interfaces`,
followed by manual indentation fixes.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
Before the Django 2.x upgrade, the DatabaseCreation
argument took an integer value. To deal with running
mulitple test instances, we created a random start
range that could count up 100 workers until the next
random id. Arbitrarily limiting the number of workers
to 100.
Post upgrade, we can now use string values. Enabling
the database + worker numbers to be more readable, as
well as removing the cap on the worker count.
Django 2.2.x is the next LTS release after Django 1.11.x; I expect
we'll be on it for a while, as Django 3.x won't have an LTS release
series out for a while.
Because of upstream API changes in Django, this commit includes
several changes beyond requirements and:
* urls: django.urls.resolvers.RegexURLPattern has been replaced by
django.urls.resolvers.URLPattern; affects OpenAPI code and related
features which re-parse Django's internals.
https://code.djangoproject.com/ticket/28593
* test_runner: Change number to suffix. Django changed the name in this
ticket: https://code.djangoproject.com/ticket/28578
* Delete now-unnecessary SameSite cookie code (it's now the default).
* forms: urlsafe_base64_encode returns string in Django 2.2.
https://docs.djangoproject.com/en/2.2/ref/utils/#django.utils.http.urlsafe_base64_encode
* upload: Django's File.size property replaces _get_size().
https://docs.djangoproject.com/en/2.2/_modules/django/core/files/base/
* process_queue: Migrate to new autoreload API.
* test_messages: Add an extra query caused by .refresh_from_db() losing
the .select_related() on the Realm object.
* session: Sync SessionHostDomainMiddleware with Django 2.2.
There's a lot more we can do to take advantage of the new release;
this is tracked in #11341.
Many changes by Tim Abbott, Umair Waheed, and Mateusz Mandera squashed
are squashed into this commit.
Fixes#10835.
Since the intent of our testing code was clearly to clear this cache
for every test, there's no reason for it to be a module-level global.
This allows us to remove an unnecessary import from test_runner.py,
which in combination with DEFAULT_REALM's definition was causing us to
run models code before running migrations inside test-backend.
(That bug, in turn, caused test-backend's check for whether migrations
needs to be run to happen sadly after trying to access a Realm,
trigger a test-backend crash if the Realm model had changed since the
last provision).
Previous cleanups (mostly the removals of Python __future__ imports)
were done in a way that introduced leading newlines. Delete leading
newlines from all files, except static/assets/zulip-emoji/NOTICE,
which is a verbatim copy of the Apache 2.0 license.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
Per the import line:
`from unittest import loader, runner # type: ignore # Mypy cannot pick
these up.`
Because `TextTestResult` inherits from `runner.TextTestResult`, mypy
doesn't see `self` as having an attribute `stream`, so we ignore these
instead of cluttering with `casts` or `isinstances`.
It was discovered that errors such as:
`OSError: [Errno 16] Device or resource busy`
potentially arise when running in serial mode, or with
explicit test cases passed to `test-backend`.
We create a path structure in the from:
`/var/<uuid>/test-backend/run_1234567/worker_N/`
A settings attribute, `TEST_WORKER_DIR`, was created as a worker's
directory for a given `test-backend` run's file storage. The
appropirate path is created in `setup_test_environment`, while each
workers subdirectory is created within `init_worker`.
This allows a test class to write to `settings.TEST_WORKER_DIR`,
populating the appropirate directory of a given worker. Also
providing the long-term approach to clean up filesystem access
in the backend unit tests.
The ids that will be used for each particular run of the test suite are
written to a unique file. Each file will then be used as a time
reference of when the suite was ran.
This change sets up the ability for a complete clean up of potentially
leaked database templates.
Tweaked by tabbott to remove these files after successful database
cleanup.
When running the test-backend suite in serial mode, `destroy_test_db`
double appends the database id number to the template if passed an
argument for `number`. The comment here explains this behavior.
N = self.parallel templates are created, and these templates were
previously named 'zulip_test_template_<1, N>'. However, to support
running multiple instances of `test-backend`, a unique
`random_id_range_start` was created for each template database.
There was no problem prior because the templates would simply be
used again and thus did not require any clean up. Now that there are
unique database names being created, every time `test-backend` is run
these templates can accumulate on disk. Instead, we clean up our
templates at the end of every complete run of the test suite, or upon a
SIGINT.
Fixes: #12426
Sometimes it's useful to run two copies of test-backend at the same
time. The problem with doing so is that we need to make sure no two
threads are using the same test database ID.
Previously, this worked only if at most one of those copies was
running in the single-threaded mode, because we used a random database
ID for the single-threaded code path, but the same IDs counting from 0
for the parallel code path.
Fix this, mostly, by generating a random start for the range of IDs
used by the process, and then counting off database IDs starting from
there (both in the parallel and non-paralllel modes).
There's still a very low probability race, see the TODO.
Additionally, there appear to be some other races with running two
copies of test-backend at the same time not related to the database.
See https://github.com/zulip/zulip/issues/12426 for a follow-up issue
that's sorta created by this.
This optimizes test-backend by skipping webhook
tests when run in default mode.
Tweaked by tabbott to extend the documentation and update the CI
commands.
This code takes care of the environment running Python 3.4 when
test label is passed directly to the test-backend command:
./tools/test-backend test_alert_words
In Django 1.11, args argument of run_subsuite function is a tuple of
length 4. The new argument is the test runner class which we do not
need because we run tests using our own version of the test runner.
We enable data_suffix option when creating Coverage instances which
causes the output files to include the hostname, pid, and random id.
Before each run erase is called which clears all existing coverage data
files. And then at the end of the test run use the combine method which
merges the reports.
We collect coverage in the main process which collects data from
imports and also when running in single process mode. In the workers we
collect coverage in run_subsuite. This creates more stats files than
strictly required but I don't see a better place to save the stats when
stopping workers.
Note that this has the side effect of enabling parallel testing in
Travis CI.
We need to reset INSTRUMENTED_CALLS variable before running every
subsuite. If we do not do this then the subsuite running on a
particular process called A will send the accumulated instrumented
calls gathered by the previous subsuites which also ran on the process A.
This also fixes the extra delay that we used to experience after the
tests had finished running. The extra delay was due to the duplicate
instrumented calls in the INSTRUMENTED_CALLS list. The size of this
list used to be ~100k for parallel model as opposed to ~1800 for serial
model.
This commit creates a dedicated file upload directory for every process
when we are running tests in parallel mode. This makes sure that we do
not run into any race conditions due to multiple processes accessing
the same upload directory.
Apparently, Django's _destroy_test_db has a mostly unnecessary
sleep(1) before dropping the database, which obviously wastes a bunch
of time in the single-test runtime of their database teardown logic.
We work around this by monkey-patching that function to not do the sleep.
Instead of zulip_test, use zulip_test_template for backend DB. This
makes sure that the DB used by backend tests is different from the
DB, which will be zulip_test, used by Casper tests.
This adds the option '--rerun' to the `test-backend` infrastructure.
It runs the tests that failed during the last 'test-backend' run. It
works by stailing failed test info at var/last_test_failure.json
Cleaned up by Umair Khan and Tim Abbott.
Something in c14e981e00 broken test
failures being reported properly; this isn't the right fix but works
and will let us avoid reverting the original change until it can be
fixed properly.
In Django, TestSuite can contain objects of type TestSuite as well
along with TestCases. This is why the run method of TestSuite is
responsible for iterating over items of TestSuite.
This also gives us access to result object which is used by unittest
to gather information about testcases.
We now instrument URL coverage whenever you run the back end tests,
and if you run the full suite and fail to test all endpoints, we
exit with a non-zero exit code and report failures to you.
If you are running just a subset of the test suite, you'll still
be able to see var/url_coverage.txt, which has some useful info.
With some tweaks to the output from tabbott.
Fixes#1441.
Previously, we suggested running
`python -c import zerver.tests.test_mytest`
when importing test_mytest failed, which doesn't work.
This commit adds the missing quotes, making it
`python -c 'import zerver.tests.test_mytest'`
This will lead to minor differences in the warnings that
people see when they run tests that are slow. We call out
the slowness a little more clearly from a visual standpoint,
and we simplify the calculation of the slowness threshold.
We still allow more time for tests with the `@slow` decorator
to run, but we don't use their expected_run_time.
Anders Kaseorg
Anders Kaseorg
Stefan Weil
Wyatt Hoodes
rht
Tim Abbott
Raymond Akornor
Anders Kaseorg
Aditya Bansal
Patrick Grave
Umair Khan
Alena Volkova
Steve Howell
derAnfaenger
neiljp (Neil Pilgrim)
Jason Michalski
Adarsh S
Raghav Jajodia
nikolay
Steve Howell
Rishi Gupta
Rishi Gupta
Tim Abbott
Eklavya Sharma