Given that can_mark_messages_read is called whenever the blue box
cursor stops on a message and that it is calculated purely on the
basis of sorted_term_types, it makes sense to cache the result.
If you were in the "Starred messages" narrow and
your pointer was on a message with the stream/topic
of "social/lunch", we wouldn't move you to the unread
messages for that topic.
I fixed this by removing the code that looked at
the current message's topic. Instead, we only look
at the active narrow to figure out the "next" topic
to go to.
Fixes#14120.
Original email address is shown to admin users in subscriber list when
email_address_visibilty is set to "Admins only" by passing delivery_email
at required places. Email address are not shown to non-admin users when
visibility is set to "Admins only".
Tweaked by tabbott to fix a few bugs and dead code.
Fixes a part of #13541.
This intent is that we'll be able to reuse this when editing streams
as well.
* Rename method: filter_with_new_topic to filter_with_new_param.
* Fix tests and method calls.
This extends our email address visibility settings to deny access to
user email addresses even to organization administrators.
At the moment, they can of course change the setting (which leaves an
audit trail), but in the future only organization owners will be able
to change that setting.
While we're at this, we rewrite the settings_data.js test to cover all
the cases in a more consistent way.
Fixes#14111.
The file populates `windows.i18n`, so now
the file name matches our convention.
Note that the module really just initializes
`i18next` and then does this:
window.i18n = i18next;
It doesn't really add any functionality to
third party library.
Before this test, we were validating the behavior
of `i18next`, but we weren't validating our light
layer that sits on top of `i18next`, which currently
resides in the slightly misnamed `translations.js`
file.
The translations module is now so small that I'll
just quote it verbatim here:
import i18next from 'i18next';
i18next.init({
lng: 'lang',
resources: {
lang: {
translation: page_params.translation_data,
},
},
nsSeparator: false,
keySeparator: false,
interpolation: {
prefix: "__",
suffix: "__",
},
returnEmptyString: false, // Empty string is not a valid translation.
});
window.i18n = i18next;
We now just do `zrequire('translations')` to initialize
the `i18next` library, which allows us to have simpler
test setup and to actually exercise the above call to
`i18next.init`.
This change now gives us 100% line coverage of `translations.js`,
which of course isn't that hard to acheive (see above).
This extracts a new module with three
functions, which we will test with 100%
line coverage:
- show_email
- email_for_user_settings
- get_time_preferences
The first two break several dependencies
in the codebase on `settings_org.js`. The
`get_time_preferences` breaks an annoying
dependency on `page_params` within people.
The module is pretty cohesive, in terms that
all three functions are just light wrappers
around `page_params` and/or `settings_config`.
Now all the modules that want to call show_email()
only have to require `settings_data`, instead of
having a dependency on the much heavier
`settings_org.js` module.
I also make some of the unit tests here be more
full-stack, where instead of stubbing show_email,
I basically just toggle `page_params.is_admin`.
Explicitly stubbing i18n in 48 different files
is mostly busy work at this point, and it doesn't
provide much signal, since often it's invoked
only to satisfy transitive dependencies.
This follows the convention of other code calling into
add_sub_to_table of checking whether the stream settings overlay is
open (and thus in the DOM) before trying to rerender it.
We add these two functions to the API,
so that we no longer have `alert_words_ui`
using private data from `alert_word`:
alert_words.has_alert_word()
alert_words.get_word_list()
And to initialize the data, we have a proper
`initialize` method that is passed in only
the parameters that it needs from `ui_init`.
(We also move the step of deleting `alert_words`
from `page_params` to the `ui_init` module.)
Because it's a bit less cumbersome to initialize
`alert_words`, we now just it directly in the
node tests for `alert_words_ui`.
This is follow up to da79fd206a
I accidentally skipped over pm_conversations. Same
ideas as the bigger previous commit--we pass in params
to the initialize function and do the delete cleanup
within ui_init.
Let's say you have module hello.js like so:
// hello.js
const hello_world = i18n.t('Hello world');
exports.get_greeting = () => hello_world;
And then two modules like this:
// apple.js
const hello = require('hello');
exports.foo = () => {
show_greeting(hello.get_greeting());
};
// banana.js
const hello = require('hello');
exports.foo = () => {
display_greeting(hello.get_greeting());
};
The test for apple.js could look like this,
and it won't crash due to the stub:
set_global('i18n', {t: () => {}});
zrequire('hello');
zrequire('apple');
Now let's say your write this broken version
of a test for banana.js:
zrequire('hello');
zrequire('banana');
If you run `./tools/test-js-with-node`, the
"banana" test will pass, because while it
does require "hello", it won't actually
*execute* the code that happens at require
time for "hello", because it's already in
the cache. Here is the code that gets
skipped:
const hello_world = i18n.t('Hello world');
But then if you try to run the banana test
individually, the above line of code will
cause the test to crash. And it will crash
even before you actually try to test the
meaningful code here:
exports.foo = () => {
display_greeting(hello.get_greeting());
};
This commit fixes this leak scenario by just
aggressively clearing out things from the
require cache.
This slows tests down by about 10%, which I think
is worth the extra safety here.
This cleans up the handoff of page_params
data between ui_init and modules that
take over ownership of page_params-derived
data.
Read the long comment in ui_init for a bit
more context.
Most of this diff is actually test cleanup.
And a lot of the diff to "real" code is
just glorified `s/page_params/params/`
in the `initialize` functions.
One little oddity is that we don't actually
surrender ownership of `page_params.user_id`
to `people.js`. We could plausibly sweep
the rest of the codebase to just use
`people.my_user_id()` consistently, but it's
not a super high priority thing to fix,
since the value never changes.
The stream_data situation is a bit messy,
since we consume `page_params` data in the
initialize() function in addition to the
`params` data we "own". I added a comment
there and intend to follow up. I tried
to mostly avoid the "word soup" by extracting
three locals at the top.
Finally, I don't touch `alert_words` yet,
despite it also doing the delete-page-params-data
dance. The problem is that `alert_words`
doesn't have a proper `initialize()`. We
should clean that up and have it use a
`Map` internally, too.
This gives them cache-compatible URLs, and also avoids some extra
copies of the sprite sheet images.
Comments on the Octopus emoji added by tabbott.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
This is not always a behavior-preserving translation: _.defaults
mutates its first argument. However, the code does not always appear
to have been written to expect that.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
This is not always a behavior-preserving translation: _.extend mutates
its first argument. However, the code does not always appear to have
been written to expect that.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
This is not always a behavior-preserving translation: $.extend mutates
its first argument. However, the code does not always appear to have
been written to expect that.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
This test wasn't particularly high value, was flaky, and would be
better rewritten as a set of node tests verifying the logic that would
run 100x as fast and more reliably for similar testing fidelity.
This moves some code from settings_display.js
into the new module settings_config.js.
Extracting this module breaks some dependencies
on settings_display.js (which has some annoying
transitive dependencies, including jQuery).
In particular this isolates stream_data from
from settings_display.js.
Two of the three structures that we moved here
weren't even directly used by settings_display.js,
since we do a lot of rendering in the modules
admin.js and setting.js.
We make get_all_display_settings() a function
to avoid a require-time dependency on page_params.
Breaking the dependencies simplifies a few
node tests.
Most of the node test complexity came from the
following commit in March 2019:
5a130097bf
The commit itself seems harmless enough, but
dependencies can have a somewhat "viral" nature,
where making stream_data depend on settings_display
caused us to modify four different node tests.
This refactoring is the first step toward sharing
our markdown code with mobile. This focuses on
the Zulip layer, not the underlying third party `marked`
library.
In this commit we do a one-time initialization to
wire up the markdown functions, but after further
discussions with Greg, it might make more sense
to just pass in helpers on every use of markdown
(which is generally only once per sent message).
I'll address that in follow-up commits.
Even though it looks like a pretty invasive change,
you will note that we barely needed to modify the
node tests to make this pass. And we have pretty
decent test coverage here.
All of the places where we used to depend on
other Zulip modules now use helper functions that
any client (e.g. mobile) can configure themselves.
Or course, in the webapp, we configure these from
modules like people/stream_data/hash_util/etc.
Even in places where markdown used to deal directly with
data structures from other modules, we now use functions.
We may revisit this in a future commit, and we might
just pass data directly for certain things.
I decided to keep the helpers data structure completely flat,
so we don't have ugly nested names like
`helpers.emoji.get_emoji_codepoint`. Because of this,
some of the names aren't 1:1, which I think is fine.
For example, we map `user_groups.is_member_of` to
`is_member_of_user_group`.
It's likely that mobile already has different names
for their versions of these functions, so trying for
fake consistency would only help the webapp. In some
cases, I think the webapp functions have names that
could be improved, but we can clean that up in future
commits, and since the names aren't coupled to markdown
itself (i.e. only the config), we will be less
constrained.
It's worth noting that `marked` has an `options`
data structure that it uses for configuration, but
I didn't piggyback onto it, since the `marked`
options are more at the lexing/parsing layer vs.
the app-data layer stuff that our helpers mostly
help with.
Hopefully it's obvious why I just put helpers in
the top-level namespace for the module rather than
passing it around through multiple layers of the
parser.
There were a couple places in markdown where we
were doing awkward `hasOwnProperty` checks for
emoji-related stuff. Now we use the Python
principle of ask-forgiveness-not-permission and
just handle the getters returning falsy data. (It
should be `undefined`, but any falsy value is
unworkable in the places I changed, so I use
the simpler, less brittle form.)
We also break our direct dependency on
`emoji_codes.json` (with some help from the
prior commit).
In one place I rename streamName to stream_name,
fixing up an ancient naming violation that goes
way back to before this code was even extracted
away from echo.js. I didn't bother to split this
out into a separate commit, since 2 of the 4
lines would be immediately re-modified in the
subsequent commit.
Note that we still depend on `fenced_code`
via the global namespace, instead of simply
requiring it directly or injecting it. The
reason I'm postponing any action there is that
we'll have to change things once we move
markdown into a shared library. (The most
likely outcome is that we'll rename/move both files
at the same time and fix the namespace/require
details as part of that commit.)
Also the markdown code still relies on `_` being
available in the global namespace. We aren't
quite ready to share code with mobile yet, but the
underscore dependency should not be problematic,
since mobile already uses underscore to use the
webapp's shared typing_status module.
This mostly moves logic into people.js.
The people functions added here are glorified
two-liners.
One thing that changes here is that we
are a bit more rigorous about duplicate
names.
The code is slightly awkward, because this
commit preserves the strange behavior
that if 'alice|42' doesn't match on
the user with the name "alice" and user_id
"42", we instead look for a user whose
name is "alice|42". That seems like a
misfeature to me, but there's a test for
it, so I want to check with Tim that it's not
intentional behavior before I simplify
the code.
We add this API to emoji.js, so that markdown
doesn't need to look at internal data structures
(or even need to understand any kind of record
format for results).
Here are the functions:
get_realm_emoji_url()
get_emoji_name()
get_emoji_codepoint()
We use the API now in markdown, which eliminates
the need for the markdown parser to require
the emoji JSON file.
Each function has a simple docstring:
get_emoji_name('1f384') === 'holiday_tree'
get_emoji_codepoint('avocado') === '1f951'
get_realm_emoji_url('shrug') === '/user_avatars/2/emoji/images/31.png'
Also we have simple test coverage for the API
(including tests that verify the docstrings).
YashRE42
Steve Howell
sahil839
Wbert Adrian Castro Vera
Tim Abbott
Anders Kaseorg
Rohitt Vashishtha
Vaibhav Raj Singh
shubhamgupta2956