The docker installer configuration incorrectly had has_appserver set
to 0; this meant that (A) the docker-zulip code needed to copy the
block of code in the installer for the `has_appserver` case into the
Dockerfile (unnecessarily), and (B) one couldn't use `install` from a
Git ref (because the static asset compiler didn't end up in the right
place).
It appears that docker-zulip tried to set this flag in their `install`
command line, but the construction inside `install` meant that didn't
work.
This fixes adding the Ubuntu repositories for Debian, as well as makes
sure that we install the debian-archive-keyring package on Debian,
which is only priority important (and thus might be missing).
It wasn't obvious reading this message that you can perfectly well
bring your own SSL/TLS certificate; unless you read quite a bit
between the lines where we say "could not find", or followed the link
to the detailed docs, the message sounded like you had to either use
--certbot or --self-signed-cert.
So, explicitly mention the BYO option. Because the "complete chain"
requirement is a bit tricky, don't try to give instructions for it
in this message; just refer the reader to the docs.
Also, drop the logic to identify which of the files is missing; it
certainly makes the code more complex, and I think even the error
message is actually clearer when it just gives the complete list of
required files -- it's much more likely that the reader doesn't know
what's required than that they do and have missed one, and even then
it's easy for them to look for themselves.
This fixes a bug where provision was failing since our most recent
upgrade to yarn/nvm/node.
It turns out my original fix was the correct fix, but to the wrong
third-party tool: nvm, not yarn, was the offender.
Apparently, new versions of yarn use the HOME environment variable to
figure out where to access their configuration, and sudo apparently
doesn't clear that variable, so install-node was being run with HOME
set to something under /home/vagrant (e.g.).
Fix this by just setting that environment variable correctly.
This replaces 250a036ff8, which
misdiagnosed the issue.
It appears that some change in yarn's versioning system means that
installing yarn itself ends up chowning its config directory
incorrectly to be owned by root, preventing `yarn install` from
working later.
node -> v8.9.4
yarn -> 1.5.1
nvm -> 0.33.8
Also updates a test in timerender.js which depends on time
provided by node which is now changed in newer release.
Some changes have been made in circeci script, we just create ~/.config
directory and chown it to circleci user so installing new version of yarn
does not cause any ci failure on circleci during provision.
This is the analog of 7b2c9223e7 for the
emoji cache; the only difference is that the existing code was working
correctly. It's still worth changing for improved robustness.
We saw issues with /srv/zulip_npm_cache being cleaned incorrectly by
this tool in production (more correctly, we noticed broken symlinks to
those directories, even from the current deployment). Print-debugging
showed that indeed older deployments were being ignored, because the
logic for `get_caches_in_use` was totally broken (this was sorta
masked because we also keep the last week's deployments).
The specific bug here turned out to be that we weren't passing the
`production` argument to generate_sha1sum_node_modules, but the
broader problem is that this logic isn't robust to changes in the
hashing algorithm.
Fix this by replacing the broken logic for trying to compute the
correct hash for that deployment with just checking the symlink inside
the deployment to let it self-report.
We can't easily do this same change for clean-venv-cache, because we
use multiple virtualenvs there. But a similar change could be useful
for the emoji cache as well.
Fixes#8116.
This is apparently installed by the perl package; I hadn't even known
it existed. We of course want to use the sha1sum command from
coreutils.
Fixes#8836.
This commit switches our emoji infrastructure to use 256 color indexed
64px spritesheets. Earlier we were using non-indexed 32px spritesheets
which were blurry on high dpi displays. These indexed spritesheets not
only provide a crispier display but are also smaller in size.
This commit also removes the `emoji-datasource` package as a dependency
as all the data is now sourced from individual datasource packages.
Fixes: #7862.
The installation isn't really complete here, and wasn't even when this
was the only success case; the instructions we're giving are for the
next step in the installation.
These instructions don't say what to do in an actual use case for this
option, but decent instructions there will require having a concrete
use case in front of us and designing the flow for it. At this stage,
just say where we are in the normal flow, and an admin who's chosen to
go off that flow can figure out how they want to vary it from there.
This flips the experimental `--express` option to be the default.
We retain the old behavior, where the script exits before
`initialize-database`, as an option `--no-init-db`; it might be useful
in e.g. a migration scenario (from a Zulip install elsewhere, or
another chat system) where the admin wants to set up the database
separately.
The install instructions are adjusted to match, getting shorter by two
steps and a bunch of words. I think this opens up opportunities to
refactor the text to simplify things further, too, but leaving that
for another commit.
Also tweak the "production" test suite to match.
Kind of unfortunate because the `sudo` interface for running a command
is objectively better -- a list of arguments, rather than a string to
be re-parsed by the shell. But some bare-bones machine images lack
`sudo`, so this makes things a bit more portable.
We do the following here:
* Remove libjasper-dev from THUMBOR_VENV_DEPENDENCIES.
Reason: This dependancy wasn't really needed by us for using
thumbor. It was a dependancy for using open-cv as Imaging Engine
in thumbor but we use PIL (Pillow now) as Imaging Engine.
* Add zlib1g-dev, libfreetype6-dev to THUMBOR_VENV_DEPENDENCIES.
Reason: These are dependancies of Pillow which are required for it
Pillow to function. Since we use Pillow in thumbor as Imaging Engine
we need these. Stuff before this didn't break because we also use
Pillow in development Environment and have these dependancies
installed from VENV_DEPENDENCIES as well.
We'll make this the normal behavior soon, once we're satisfied with
our arrangements for sending the admin straight to realm creation and
using the app without configuring email. The instructions in the docs
will also have to change accordingly, of course.
This causes us to give an error if you pass the installer any
positional arguments, e.g. with `--`. There's no reason you'd want
to do this, but I accidentally did it by passing an extra `--` to
the `test-install/install` wrapper and spent a few minutes on
confused debugging.
This gives us just one way of adopting a self-signed cert, rather than
one script which would generate a new one and an option to another
which would symlink to the system's snakeoil cert. Now those two
codepaths converge, and do the same thing.
The small advantage of generating our own over the alternative is that
it lets us set the name in the cert to EXTERNAL_HOST, rather than the
system's hostname as embedded in the system snakeoil certs. Not a big
deal, but might make things go slightly smoother if some browsers are
lenient (in a way that they probably shouldn't be.)
Before this fix, the installer has an extremely annoying bug where
when run inside a container with `lxc-attach`, when the installer
finishes, the `lxc-attach` just hangs and doesn't respond even to
C-c or C-z. The only way to get the terminal back is to root around
from some other terminal to find the PID and kill it; then run
something like `stty sane` to fix the messed-up terminal settings
left behind.
After bisecting pieces of the install script to locate which step
was causing the issue, it comes down to the `service camo restart`.
The comment here indicates that we knew about an annoying bug here
years ago, and just swept it under the rug by skipping this step
when in Travis. >_<
The issue can be reproduced by running simply `service camo restart`
under `lxc-attach` instead of the installer; or `service camo start`,
following a `service camo stop`. If `lxc-attach` is used to get an
interactive shell, these commands appear to work fine; but then when
that shell exits, the same hang appears. So, when we start camo
we're evidently leaving some kind of mess that entangles the daemon
with our shell.
Looking at the camo initscript where it starts the daemon, there's
not much code, and one flag jumps out as suspicious:
start-stop-daemon --start --quiet --pidfile $PIDFILE -bm \
--exec $DAEMON --no-close -c nobody --test > /dev/null 2>&1 \
|| return 1
start-stop-daemon --start --quiet --pidfile $PIDFILE -bm \
--no-close -c nobody --exec $DAEMON -- \
$DAEMON_ARGS >> /var/log/camo/camo.log 2>&1 \
|| return 2
What does `--no-close` do?
-C, --no-close
Do not close any file descriptor when forcing the daemon
into the background (since version 1.16.5). Used for
debugging purposes to see the process output, or to
redirect file descriptors to log the process output.
And in fact, looking in /proc/PID/fd while a hang is happening finds
that fd 0 on the camo daemon process, aka stdin, is connected to our
terminal.
So, stop that by denying the initscript our stdin in the first place.
This fixes the problem.
The Debian maintainer turns out to be "Zulip Debian Packaging Team",
at debian@zulip.com; so this package and its bugs are basically ours.
This provides a major simplification for non-production installs,
including our own testing (it's already in both the test-install
harness script and the "production" test suite) as well as potential
admins evaluating Zulip.
Ultimately this should probably be the default behavior, with perhaps
something shown to admins on the web as a reminder and link to help on
installing a better certificate. For now, pending working through
that, just get the behavior in and leave it opt-in.
The third-party `install-yarn.sh` script uses `curl`, and we invoke it
in `install-node`. So we need to install it as a dependency.
We've mostly gotten away with this because it's common for `curl` to
already be installed; but it isn't always.
Tim Abbott
Aditya Bansal
Greg Price
Priyank
Harshit Bansal