5abf4dee92 made this distinction, then multitornado_frontends was
never used; the singletornado_frontends alerting worked even for the
multiple-Tornado instances.
Remove the useless and misleading distinction.
Even if Django and PostgreSQL are on the same host, the `nagios` user
may lack permissions to read accessory configuration files needed to
load the Django configuration (e.g. authentication keys).
Catch those failures, and switch to loading the required settings from
`/etc/zulip/zulip.conf`.
Without this, uwsgi does not release the GIL before going back into
`epoll_wait` to wait for the next request. This results in any
background threads languishing, unserviced.[1]
Practically, this results in Sentry background reporter threads timing
out when attempting to post results -- but only in situations with low
traffic, as in those significant time is spent in `epoll_wait`. This
is seen in logs as:
WARN [urllib3.connectionpool] Retrying (Retry(total=1, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError(SSLEOFError(8, 'EOF occurred in violation of protocol (_ssl.c:1131)'))': /api/123456789/envelope/
Or:
WARN [urllib3.connectionpool] Retrying (Retry(total=0, connect=None, read=None, redirect=None, status=None)) after connection broken by 'ProxyError('Cannot connect to proxy.', RemoteDisconnected('Remote end closed connection without response'))': /api/123456789/envelope/
Sentry attempts to detect this and warn, but due to startup ordering,
the warning is not printed without lazy-loading.
Enable threads, at a miniscule performance cost, in order to support
background workers like Sentry[2].
[1] https://github.com/unbit/uwsgi/issues/1141#issuecomment-169042767
[2] https://docs.sentry.io/clients/python/advanced/#a-note-on-uwsgi
This is a reprise of c97162e485, but for the case where certbot
certs are no longer in use by way of enabling `http_only` and letting
another server handle TLS termination.
Fixes: #22034.
This allows system-level configuration to be done by `apt-get install`
of nginx modules, which place their load statements in this directory.
The initial import in ed0cb0a5f8 of the stock nginx config omitted
this include -- one potential explanation was in an effort to reduce
the memory footprint of the server.
The default nginx install enables:
50-mod-http-auth-pam.conf
50-mod-http-dav-ext.conf
50-mod-http-echo.conf
50-mod-http-geoip2.conf
50-mod-http-geoip.conf
50-mod-http-image-filter.conf
50-mod-http-subs-filter.conf
50-mod-http-upstream-fair.conf
50-mod-http-xslt-filter.conf
50-mod-mail.conf
50-mod-stream.conf
While Zulip doesn't actively use any of these, they likely don't do
any harm to simply be loaded -- they are loaded into every nginx by
default.
Having the `modules-enabled` include allows easier extension of the
server, as neither of the existing wildcard
includes (`/etc/nginx/conf.d/*.conf` and
`/etc/nginx/zulip-include/app.d/*.conf`) are in the top context, and
thus able to load modules.
54b6a83412 fixed the typo introduced in 49ad188449, but that does
not clean up existing installs which had the file with the wrong name
already.
Remove the file with the typo'd name, so two jobs do not race, and fix
the typo in the comment.
The top-level `chdir` setting only does the chdir once, at initial
`uwsgi` startup time. Rolling restarts, however, however, require
that `uwsgi` pick up the _new_ value of the `current` directory, and
start new workers in that directory -- as currently implemented,
rolling restarts cannot restart into newer versions of the code, only
the same one in which they were started.
Use [configurable hooks][1] to execute the `chdir` after every fork.
This causes the following behaviour:
```
Thu May 12 18:56:55 2022 - chain reload starting...
Thu May 12 18:56:55 2022 - chain next victim is worker 1
Gracefully killing worker 1 (pid: 1757689)...
worker 1 killed successfully (pid: 1757689)
Respawned uWSGI worker 1 (new pid: 1757969)
Thu May 12 18:56:56 2022 - chain is still waiting for worker 1...
running "chdir:/home/zulip/deployments/current" (post-fork)...
Thu May 12 18:56:57 2022 - chain is still waiting for worker 1...
Thu May 12 18:56:58 2022 - chain is still waiting for worker 1...
Thu May 12 18:56:59 2022 - chain is still waiting for worker 1...
WSGI app 0 (mountpoint='') ready in 3 seconds on interpreter 0x55dfca409170 pid: 1757969 (default app)
Thu May 12 18:57:00 2022 - chain next victim is worker 2
[...]
```
..and so forth down the line of processes. Each process is correctly
started in the _current_ value of `current`, and thus picks up the
correct code.
[1]: https://uwsgi-docs.readthedocs.io/en/latest/Hooks.html
Our current EC2 systems don’t have an interface named ‘eth0’, and if
they did, this script would do nothing but crash with ImportError
because we have never installed boto.utils for Python 3.
(The message of commit 2a4d851a7c made
an effort to document for future researchers why this script should
not have been blindly converted to Python 3. However, commit
2dc6d09c2a (#14278) was evidently
unresearched and untested.)
Signed-off-by: Anders Kaseorg <anders@zulip.com>
6f5ae8d13d removed the `$replication` variable from the
configurations of PostgreSQL 12 and higher, but left it in the
templates for PostgreSQL 10 and 11. Because `undef != ''`,
deployments on PostgreSQL 10 and 11 started trying to push to S3
backups, regardless of if they were configured, leaving frequent log
messages like:
```
2022-04-30 12:45:47.805 UTC [626d24ec.1f8db0]: [107-1] LOG: archiver process (PID 2086106) exited with exit code 1
2022-04-30 12:45:49.680 UTC [626d24ee.1f8dc3]: [18-1] LOG: checkpoint complete: wrote 19 buffers (0.0%); 0 WAL file(s) added, 0 removed, 0 recycled; write=1.910 s, sync=0.022 s, total=1.950 s; sync files=16, longest=0.018 s, average=0.002 s; distance=49 kB, estimate=373 kB
/usr/bin/timeout: failed to run command "/usr/local/bin/env-wal-g": No such file or directory
2022-04-30 12:46:17.852 UTC [626d2f99.1fd4e9]: [1-1] FATAL: archive command failed with exit code 127
2022-04-30 12:46:17.852 UTC [626d2f99.1fd4e9]: [2-1] DETAIL: The failed archive command was: /usr/bin/timeout 10m /usr/local/bin/env-wal-g wal-push pg_wal/000000010000000300000080
```
Switch the PostgreSQL 10 and 11 configuration to check
`s3_backups_bucket`, like the other versions.
It is possible to have previously installed certbot, but switched back
to using self-signed certificates -- in which case renewing them using
certbot may fail.
Verify that the certificate is a symlink into certbot's output
directory before running `fix-standalone-certbot`.
Commit f6d27562fa (#21564) tried to
ensure Chrony is running, which fails in containers where Chrony
doesn’t have permission to update the host clock.
The Debian package should still attempt to start it, and Puppet should
still restart it when chrony.conf is modified.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Since wal-g does not provide binaries for aarch64, build them from
source. While building them from source for arm64 would better ensure
that build process is tested, the build process takes 7min and 700M of
temp files, which is an unacceptable cost; we thus only build on
aarch64.
Since the wal-g build process uses submodules, which are not in the
Github export, we clone the full wal-g repository. Because the
repository is relatively small, we clone it anew on each new version,
rather than attempt to manage the remotes.
Fixes#21070.
The default timeout for `exec` commands in Puppet is 5 minutes[1]. On
slow connections, this may not be sufficient to download larger
downloads, such as the ~135MB golang tarball.
Increase the timeout to 10 minutes; this is a minimum download speed
of is ~225kB/s.
Fixes#21449.
[1]: https://puppet.com/docs/puppet/5.5/types/exec.html#exec-attribute-timeout
This commit adds a cron job which runs every hour to add the users to
full members system group if user is promoted to a full member.
This should ensure that full member status is available no more than
an hour after configuration suggests it should be.
Previously, it was possible to configure `wal-g` backups without
replication enabled; this resulted in only daily backups, not
streaming backups. It was also possible to enable replication without
configuring the `wal-g` backups bucket; this simply failed to work.
Make `wal-g` backups always streaming, and warn loudly if replication
is enabled but `wal-g` is not configured.
It would confuse a future Debian 15.10 release with Ubuntu 15.10, it
relies on the legacy fact $::operatingsystemrelease, the modern fact
$::os provides this information without extra logic, and it’s unused
as of commit 03bffd3938.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Zulip writes a `rabbitmq.config` configuration file which locks down
RabbitMQ to listen only on localhost:5672, as well as the RabbitMQ
distribution port, on localhost:25672.
The "distribution port" is part of Erlang's clustering configuration;
while it is documented that the protocol is fundamentally
insecure ([1], [2]) and can result in remote arbitrary execution of
code, by default the RabbitMQ configuration on Debian and Ubuntu
leaves it publicly accessible, with weak credentials.
The configuration file that Zulip writes, while effective, is only
written _after_ the package has been installed and the service
started, which leaves the port exposed until RabbitMQ or system
restart.
Ensure that rabbitmq's `/etc/rabbitmq/rabbitmq.config` is written
before rabbitmq is installed or starts, and that changes to that file
trigger a restart of the service, such that the ports are only ever
bound to localhost. This does not mitigate existing installs, since
it does not force a rabbitmq restart.
[1] https://www.erlang.org/doc/apps/erts/erl_dist_protocol.html
[2] https://www.erlang.org/doc/reference_manual/distributed.html#distributed-erlang-system
This is required in order to lock down the RabbitMQ port to only
listen on localhost. If the nodename is `rabbit@hostname`, in most
circumstances the hostname will resolve to an external IP, which the
rabbitmq port will not be bound to.
Installs which used `rabbit@hostname`, due to RabbitMQ having been
installed before Zulip, would not have functioned if the host or
RabbitMQ service was restarted, as the localhost restrictions in the
RabbitMQ configuration would have made rabbitmqctl (and Zulip cron
jobs that call it) unable to find the rabbitmq server.
The previous commit ensures that configure-rabbitmq is re-run after
the nodename has changed. However, rabbitmq needs to be stopped
before `rabbitmq-env.conf` is changed; we use an `onlyif` on an `exec`
to print the warning about the node change, and let the subsequent
config change and notify of the service and configure-rabbitmq to
complete the re-configuration.
`/etc/rabbitmq/rabbitmq-env.conf` sets the nodename; anytime the
nodename changes, the backing database changes, and this requires
re-creating the rabbitmq users and permissions.
Trigger this in puppet by running configure-rabbitmq after the file
changes.
The Erlang `epmd` daemon listens on port 4369, and provides
information (without authentication) about which Erlang processes are
listening on what ports. This information is not itself a
vulnerability, but may provide information for remote attackers about
what local Erlang services (such as `rabbitmq-server`) are running,
and where.
`epmd` supports an `ERL_EPMD_ADDRESS` environment variable to limit
which interfaces it binds on. While this environment variable is set
in `/etc/default/rabbitmq-server`, Zulip unfortunately attempts to
start `epmd` using an explicit `exec` block, which ignores those
settings.
Regardless, this lack of `ERL_EPMD_ADDRESS` variable only controls
`epmd`'s startup upon first installation. Upon reboot, there are two
ways in which `epmd` might be started, neither of which respect
`ERL_EPMD_ADDRESS`:
- On Focal, an `epmd` service exists and is activated, which uses
systemd's configuration to choose which interfaces to bind on, and
thus `ERL_EPMD_ADDRESS` is irrelevant.
- On Bionic (and Focal, due to a broken dependency from
`rabbitmq-server` to `epmd@` instead of `epmd`, which may lead to
the explicit `epmd` service losing a race), `epmd` is started by
`rabbitmq-server` when it does not detect a running instance.
Unfortunately, only `/etc/init.d/rabbitmq-server` would respects
`/etc/default/rabbitmq-server` -- and it defers the actual startup
to using systemd, which does not pass the environment variable
down. Thus, `ERL_EPMD_ADDRESS` is also irrelevant here.
We unfortunately cannot limit `epmd` to only listening on localhost,
due to a number of overlapping bugs and limitations:
- Manually starting `epmd` with `-address 127.0.0.1` silently fails
to start on hosts with IPv6 disabled, due to an Erlang bug ([1],
[2]).
- The dependencies of the systemd `rabbitmq-server` service can be
fixed to include the `epmd` service, and systemd can be made to
bind to `127.0.0.1:4369` and pass that socket to `epmd`, bypassing
the above bug. However, the startup of this service is not
guaranteed, because it races with other sources of `epmd` (see
below).
- Any process that runs `rabbitmqctl` results in `epmd` being started
if one is not currently running; these instances do not respect any
environment variables as to which addresses to bind on. This is
also triggered by `service rabbitmq-server status`, as well as
various Zulip cron jobs which inspect the rabbitmq queues. As
such, it is difficult-to-impossible to ensure that some other
`epmd` process will not win the race and open the port on all
interfaces.
Since the only known exposure from leaving port 4369 open is
information that rabbitmq is running on the host, and the complexity
of adjusting this to only bind on localhost is high, we remove the
setting which does not address the problem, and document that the port
is left open, and should be protected via system-level or
network-level firewalls.
[1]: https://bugs.launchpad.net/ubuntu/+source/erlang/+bug/1374109
[2]: https://github.com/erlang/otp/issues/4820
mochiweb was renamed to web_dispatch in RabbitMQ 3.8.0, and the plugin
is not enabled. Nor does this control the management interface, which
would listen on port 15672.
This addresses the problems mentioned in the previous commit, but for
existing installations which have `authenticator = standalone` in
their configurations.
This reconfigures all hostnames in certbot to use the webroot
authenticator, and attempts to force-renew their certificates.
Force-renewal is necessary because certbot contains no way to merely
update the configuration. Let's Encrypt allows for multiple extra
renewals per week, so this is a reasonable cost.
Because the certbot configuration is `configobj`, and not
`configparser`, we have no way to easily parse to determine if webroot
is in use; additionally, `certbot certificates` does not provide this
information. We use `grep`, on the assumption that this will catch
nearly all cases.
It is possible that this will find `authenticator = standalone`
certificates which are managed by Certbot, but not Zulip certificates.
These certificates would also fail to renew while Zulip is running, so
switching them to use the Zulip webroot would still be an improvement.
Fixes#20593.
As a consequence:
• Bump minimum supported Python version to 3.7.
• Move Vagrant environment to Debian 10, which has Python 3.7.
• Move CI frontend tests to Debian 10.
• Move production build test to Debian 10.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Doing so requires protecting /metrics from direct access when proxied
through nginx. If camo is placed on a separate host, the equivalent
/metrics URL may need to be protected.
See https://github.com/cactus/go-camo#metrics for details on the
statistics so reported. Note that 5xx responses are _expected_ from
go-camo's statistics, as it returns 502 status code when the remote
server responds with 500/502/503/504, or 504 when the remote host
times out.
Alex Vandiver
Anders Kaseorg
Sahil Batra