This commit adds a `jitsi_server_url` field to the Realm model, which
will be used to save the URL of the custom Jitsi Meet server. In
the database, `None` will encode the server-level default. We can't
readily use `None` in the API, as it could be confused with "field not
sent". Therefore, we will use the string "default" for this purpose.
We have also introduced `server_jitsi_server_url` in the `/register`
API. This will be used to display the server's default Jitsi server
URL in the settings UI.
The existing `jitsi_server_url` will now be calculated as
`realm_jitsi_server_url || server_jitsi_server_url`.
Fixes a part of #17914.
Co-authored-by: Gaurav Pandey <gauravguitarrocks@gmail.com>
This endpoint verifies that the services that Zulip needs to function
are running, and Django can talk to them. It is designed to be used
as a readiness probe[^1] for Zulip, either by Kubernetes, or some other
reverse-proxy load-balancer in front of Zulip. Because of this, it
limits access to only localhost and the IP addresses of configured
reverse proxies.
Tests are limited because we cannot stop running services (which would
impact other concurrent tests) and there would be extremely limited
utility to mocking the very specific methods we're calling to raising
the exceptions that we're looking for.
[^1]: https://kubernetes.io/docs/tasks/configure-pod-container/configure-liveness-readiness-startup-probes/
In feature levels 153 and 154, a new value of "partially_completed"
for `result` in a success (HTTP status code 200) was added for two
endpoints that process messages in batches: /api/delete-topic and
/api/mark-all-as-read.
Prior to these changes, `result` was either "success" or "error" for
all responses, which was a useful API invariant to have for clients.
So, here we remove "partially_completed" as a potential value for
"result" in a response. And instead, for the two endpoints noted
above, we return a boolean field "complete" to indicate if the
response successfully deleted/marked as read all the targeted
messages (complete: true) or if only some of the targeted messages
were processed (complete: false).
The "code" field for an error string that was also returned as part
of a partially completed response is removed in these changes as
well.
The web app does not currently use the /api/mark-all-as-read
endpoint, but it does use the /api/delete-topic endpoint, so these
changes update that to check the `complete` boolean instead of the
string value for `result`.
The type annotation for functools.partial uses unchecked Any for all
the function parameters (both early and late). returns.curry.partial
uses a mypy plugin to check the parameters safely.
https://returns.readthedocs.io/en/latest/pages/curry.html
Signed-off-by: Anders Kaseorg <anders@zulip.com>
This algorithm existed in multiple places, with different queries.
Since we only access properties in the UserMessage table, we
standardize on the much simpler and faster Index Only Scan, rather
than a merge join.
This demonstrates the use of BaseModel to replace a check_dict_only
validator.
We also add support to referring to $defs in the OpenAPI tests. In the
future, we can descend down each object instead of mapping them to dict
for more accurate checks.
This demonstrates some basic use cases of the Json[...] wrapper with
@typed_endpoint.
Along with this change we extend test_openapi so that schema checking
based on function signatures will still work with this new decorator.
Pydantic's TypeAdapter supports dumping the JSON schema of any given type,
which is leveraged here to validate against our own OpenAPI definitions.
Parts of the implementation will be covered in later commits as we
migrate more functions to use @typed_endpoint.
See also:
https://docs.pydantic.dev/latest/api/type_adapter/#pydantic.type_adapter.TypeAdapter.json_schema
For the OpenAPI schema, we preprocess it mostly the same way. For the
parameter types though, we no longer need to use
get_standardized_argument_type to normalize type annotation, because
Pydantic dumps a JSON schema that is compliant with OpenAPI schema
already, which makes it a lot convenient for us to compare the types
with our OpenAPI definitions.
Do note that there are some exceptions where our definitions do not match
the generated one. For example, we use JSON to parse int and bool parameters,
but we don't mark them to use "application/json" in our definitions.
This is important because the "guests" value isn't one that we'd
expect anyone to pick intentionally, and in particular isn't an
available option for the similar/adjacent "email invitations" setting.
This commit rename the existing setting `Who can invite users to this
organization` to `Who can send email invitations to new users` and
also renames all the variables related to this setting that do not
require a change to the API.
This was done for better code readability as a new setting
`Who can create invite links` will be added in future commits.
This commit does the backend changes required for adding a realm
setting based on groups permission model and does the API changes
required for the new setting `Who can create multiuse invite link`.
This commit adds id_field_name field to GroupPermissionSetting
type which will be used to store the string formed by concatenation
of setting_name and `_id`.
This was already enforced via separate logic that requires an owner to
invite an owner, but it makes the intent of the code a lot more clear
if we don't have this value mysteriously absent.
Earlier there was a function to check if owner is
required to create invitations for the role specified
in invite and check for administrator was done
without any function call.
This commit adds a new function to check whether
owner or administrator is required for creating
invitations for the specified role and
refactors the code to use that new function.
Rewrite the test so that we don't have a dedicated URL for testing.
dev_update_subgroups is called directly from the tests without using the
test client.
Creates process for demo organization owners to add an email address
and password to their account.
Uses the same flow as changing an email (via user settings) at the
beginning, but then sends a different email template to the user
for the email confirmation process.
We also encourage users to set their full name field in the modal for
adding an email in a demo organization. We disable the submit button
on the form if either input is empty, email or full name.
When the user clicks the 'confirm and set password' button in the
email sent to confirm the email address sent via the form, their
email is updated via confirm_email_change, but the user is redirected
to the reset password page for their account (instead of the page for
confirming an email change has happened).
Once the user successfully sets a password, then they will be
prompted to log in with their newly configured email and password.
Since an email address is not required to create a demo organization,
we need a Zulip API email address for the web-app to use until the
owner configures an email for their account.
Here, we set the owner's `email_address_visibility` to "Nobody" when
the owner's account is created so that the Zulip API email field in
their profile is a fake email address string.
To make creation of demo organizations feel lightweight for users,
we do not want to require an email address at sign-up. Instead an
empty string will used for the new realm owner's email. Currently
implements that for new demo organizations in the development
environment.
Because the user's email address does not exist, we don't enqueue
any of the welcome emails upon account/realm creation, and we
don't create/send new login emails.
This is a part of #19523.
Co-authored by: Tim Abbott <tabbott@zulip.com>
Co-authored by: Lauryn Menard <lauryn@zulip.com>
Updates the API error response when there is an unknown or
deactivated user in the `principals` parameter for either the
`/api/subscribe` or `/api/unsubscribe` endpoints. We now use
the `access_user_by_email` and `access_user_by_id` code paths,
which return an HTTP response of 400 and a "BAD_REQUEST" code.
Previously, an HTTP response of 403 was returned with a special
"UNAUTHORIZED_PRINCIPAL" code in the error response. This code
was not documented in the API documentation and is removed as
a potential JsonableError code with these changes.
Fixes#26593.
This PR implements the audio call feature for Zoom. This is done by explicitly
telling Zoom to create a meeting where the host's video and participants' video
are off by default.
Another key change is that when creating a video call, the host's and
participants' video will be on by default. The old code doesn't specify that
setting, so meetings actually start with video being off. This new behavior has
less work for users to do. They don't have to turn on video when joining a call
advertised as "video call". It still respects users' preferences because they
can still configure their own personal setting that overrides the meeting
defaults.
The Zoom API documentation can be found at
https://developers.zoom.us/docs/api/rest/reference/zoom-api/methods/#operation/meetingCreateFixes#26549.
**Background**
User groups are expected to comply with the DAG constraint for the
many-to-many inter-group membership. The check for this constraint has
to be performed recursively so that we can find all direct and indirect
subgroups of the user group to be added.
This kind of check is vulnerable to phantom reads which is possible at
the default read committed isolation level because we cannot guarantee
that the check is still valid when we are adding the subgroups to the
user group.
**Solution**
To avoid having another transaction concurrently update one of the
to-be-subgroup after the recursive check is done, and before the subgroup
is added, we use SELECT FOR UPDATE to lock the user group rows.
The lock needs to be acquired before a group membership change is about
to occur before any check has been conducted.
Suppose that we are adding subgroup B to supergroup A, the locking protocol
is specified as follows:
1. Acquire a lock for B and all its direct and indirect subgroups.
2. Acquire a lock for A.
For the removal of user groups, we acquire a lock for the user group to
be removed with all its direct and indirect subgroups. This is the special
case A=B, which is still complaint with the protocol.
**Error handling**
We currently rely on Postgres' deadlock detection to abort transactions
and show an error for the users. In the future, we might need some
recovery mechanism or at least better error handling.
**Notes**
An important note is that we need to reuse the recursive CTE query that
finds the direct and indirect subgroups when applying the lock on the
rows. And the lock needs to be acquired the same way for the addition and
removal of direct subgroups.
User membership change (as opposed to user group membership) is not
affected. Read-only queries aren't either. The locks only protect
critical regions where the user group dependency graph might violate
the DAG constraint, where users are not participating.
**Testing**
We implement a transaction test case targeting some typical scenarios
when an internal server error is expected to happen (this means that the
user group view makes the correct decision to abort the transaction when
something goes wrong with locks).
To achieve this, we add a development view intended only for unit tests.
It has a global BARRIER that can be shared across threads, so that we
can synchronize them to consistently reproduce certain potential race
conditions prevented by the database locks.
The transaction test case lanuches pairs of threads initiating possibly
conflicting requests at the same time. The tests are set up such that exactly N
of them are expected to succeed with a certain error message (while we don't
know each one).
**Security notes**
get_recursive_subgroups_for_groups will no longer fetch user groups from
other realms. As a result, trying to add/remove a subgroup from another
realm results in a UserGroup not found error response.
We also implement subgroup-specific checks in has_user_group_access to
keep permission managing in a single place. Do note that the API
currently don't have a way to violate that check because we are only
checking the realm ID now.
We want to make the callers be more explicit about the use of the
user group being accessed, so that the later implemented database lock
can be benefited from the visibility.
We can directly get the realm object from Message object now
and there is no need to get the realm object from "sender"
field of Message object.
After this change, we would not need to fetch "sender__realm"
field using "select_related" and instead only passing "realm"
to select_related when querying Message objects would be enough.
This commit also updates a couple of cases to directly access
realm ID from message object and not message.sender. Although
we have fetched sender object already, so accessing realm_id
from message directly or from message.sender should not matter,
but we can be consistent to directly get realm from Message
object whenever possible.
Instead of having a "realm.is_zephyr_mirror_realm" check for every
get_streams_traffic call, this commit udpates get_streams_traffic to
accept realm as parameter and return "None" for zephyr mirror realm.
This migration applies under the assumption that extra_data_json has
been populated for all existing and coming audit log entries.
- This removes the manual conversions back and forth for extra_data
throughout the codebase including the orjson.loads(), orjson.dumps(),
and str() calls.
- The custom handler used for converting Decimal is removed since
DjangoJSONEncoder handles that for extra_data.
- We remove None-checks for extra_data because it is now no longer
nullable.
- Meanwhile, we want the bouncer to support processing RealmAuditLog entries for
remote servers before and after the JSONField migration on extra_data.
- Since now extra_data should always be a dict for the newer remote
server, which is now migrated, the test cases are updated to create
RealmAuditLog objects by passing a dict for extra_data before
sending over the analytics data. Note that while JSONField allows for
non-dict values, a proper remote server always passes a dict for
extra_data.
- We still test out the legacy extra_data format because not all
remote servers have migrated to use JSONField extra_data.
This verifies that support for extra_data being a string or None has not
been dropped.
Co-authored-by: Siddharth Asthana <siddharthasthana31@gmail.com>
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
This commit addresses the issue where the topic highlighting
in search results was offset by one character when an
apostrophe was present. The problem stemmed from the disparity
in HTML escaping generated by the function `func.escape_html` which
is used to obtain `topic_matches` differs from the escaping performed
by the function `django.utils.html.escape` for apostrophes (').
func.escape_html | django.utils.html.escape
-----------------+--------------------------
' | '
To fix this SQL query is changed to return the HTML-escaped
topic name generated by the function `func.escape_html`.
Fixes: #25633.
This adds API support to reorder linkifiers and makes sure that the
returned lists of linkifiers from `GET /events`, `POST /register`, and
`GET /realm/linkifiers` are always sorted with the order that they
should processed when rendering linkifiers.
We set the new `order` field to the ID with the migration. This
preserves the order of the existing linkifiers.
New linkifiers added will always be ordered the last. When reordering,
the `order` field of all linkifiers in the same realm is updated, in
a manner similar to how we implement ordering for
`custom_profile_fields`.
We have historically cached two types of values
on a per-request basis inside of memory:
* linkifiers
* display recipients
Both of these caches were hand-written, and they
both actually cache values that are also in memcached,
so the per-request cache essentially only saves us
from a few memcached hits.
I think the linkifier per-request cache is a necessary
evil. It's an important part of message rendering, and
it's not super easy to structure the code to just get
a single value up front and pass it down the stack.
I'm not so sure we even need the display recipient
per-request cache any more, as we are generally pretty
smart now about hydrating recipient data in terms of
how the code is organized. But I haven't done thorough
research on that hypotheseis.
Fortunately, it's not rocket science to just write
a glorified memoize decorator and tie it into key
places in the code:
* middleware
* tests (e.g. asserting db counts)
* queue processors
That's what I did in this commit.
This commit definitely reduces the amount of code
to maintain. I think it also gets us closer to
possibly phasing out this whole technique, but that
effort is beyond the scope of this PR. We could
add some instrumentation to the decorator to see
how often we get a non-trivial number of saved
round trips to memcached.
Note that when we flush linkifiers, we just use
a big hammer and flush the entire per-request
cache for linkifiers, since there is only ever
one realm in the cache.
In this commit, we introduce a new option in the stream creation
UI - a 'Default stream for new users' checkbox. By default, the
checkbox is set to 'off' and is only visible to admins. This
allow admins to easily designate a stream as the default stream
for new users during stream creation.
Fixes#24048.
This commit adds a 'Default stream for new users' checkbox in
the stream editing UI to allow admins to easily add or remove
a stream as the default stream for new users. Previously, this
functionality required navigating to separate menu.
Fixes a part of #24048.
This commit adds code to pass stream traffic data using
the "stream_weekly_traffic" field in stream objects.
We already include the traffic data in Subscription objects,
but the traffic data does not depend on the user to stream
relationship and is stream-only information, so it's better
to include it in Stream objects. We may remove the traffic
data and other stream information fields for Subscription
objects in future.
This will help clients to correctly display the stream
traffic data in case where client receives a stream
creation event and no subscription event, for an already
existing stream which the user did not have access to before.
This commit adds stream_to_dict method which is same as
Stream.to_dict method as of now. This is a prep commit
to include stream traffic data in stream objects.
Earlier while changing group level group based settings
there was no check if the new value for setting is same as
the current value.
This commit adds this check now a setting value will be only
changed when it is not equal to present value.
Hemant Umre
Alex Vandiver
Lauryn Menard
Aman Agrawal
Lalit
Anders Kaseorg
Zixuan James Li
Tim Abbott
Ujjawal Modi
Eeshan Garg
Satyam Bansal
Danny Su
Mateusz Mandera
Sahil Batra
Akshat
Steve Howell