Depending on the kind of config error being shown, different "go back"
links may be more appropriate.
We probably hard-coded /login/ for it, because these config errors are
most commonly used for authentication backend config error, where it
makes sense to have /login/ as "go back", because the user most likely
indeed got there from the login page.
However, for remote_billing_bouncer_not_configured, it doesn't make
sense, because the user almost surely is already logged in and got there
by clicking "Plan management" inside the gear menu in the logged in app.
It's best for these to just be consistent. Therefore:
1. The .../not-configured/ error page endpoint should be restricted to
.has_billing_access users only.
2. For consistency, self_hosting_auth_view_common is tweaked to also do
the .has_billing_access check as the first thing, to avoid revealing
configuration information via its redirect/error-handling behavior.
The revealed configuration information seems super harmless, but it's
simpler to not have to worry about it and just be consistent.
Just shows a config error page if the bouncer is not enabled. Uses a new
endpoint for this so that it can work nicely for both browser and
desktop app clients.
It's necessary, because the desktop app expects to get a json response
with either an error or billing_access_url to redirect to. Showing a
nice config error page can't be done via the json error mechanism, so
instead we just serve a redirect to the new error page, which the app
will open in the browser in a new window or tab.
When you click "Plan management", the desktop app opens
/self-hosted-billing/ in your browser immediately. So that works badly
if you're already logged into another account in the browser, since that
session will be used and it may be for a different user account than in
the desktop app, causing unintended behavior.
The solution is to replace the on click behavior for "Plan management"
in the desktop app case, to instead make a request to a new endpoint
/json/self-hosted-billing, which provides the billing access url in a
json response. The desktop app takes that URL and window.open()s it (in
the browser). And so a remote billing session for the intended user will
be obtained.
Given that most of the use cases for realms-only code path would
really like to upload audit logs too, and the others would likely
produce a better user experience if they upoaded audit logs, we
should just have a single main code path here i.e.
'send_analytics_to_push_bouncer'.
We still only upload usage statistics according to documented
option, and only from the analytics cron job.
The error handling takes place in 'send_analytics_to_push_bouncer'
itself.
When a self-hosted Zulip server does a data export and then import
process into a different hosting environment (i.e. not sharing the
RemoteZulipServer with the original, we'll have various things that
fail where we look up the RemoteRealm by UUID and find it but the
RemoteZulipServer it is associated with is the wrong one.
Right now, we ask user to contact support via an error page but
might develop UI to help user do the migration directly.
Implements a nice redirect flow to give a good UX for users attempting
to access a remote billing page with an expired RemoteRealm session e.g.
/realm/some-uuid/sponsorship - perhaps through their browser
history or just their session expired while they were doing things in
this billing system.
The logic has a few pieces:
1. get_remote_realm_from_session, if the user doesn't have a
identity_dict will raise RemoteBillingAuthenticationError.
2. If the user has an identity_dict, but it's expired, then
get_identity_dict_from_session inside of get_remote_realm_from_session
will raise RemoteBillingIdentityExpiredError.
3. The decorator authenticated_remote_realm_management_endpoint
catches that exception and uses some general logic, described in more
detail in the comments in the code, to figure out the right URL to
redirect them to. Something like:
https://theirserver.example.com/self-hosted-billing/?next_page=...
where the next_page param is determined based on parsing request.path
to see what kind of endpoint they're trying to access.
4. The remote_server_billing_entry endpoint is tweaked to also send
its uri scheme to the bouncer, so that the bouncer can know whether
to do the redirect on http or https.
We pass `next` parameter with /self-hosted-billing to redirect
users to the intended page after login.
Fixed realm_uuid incorrectly required in remote_realm_upgrade_page.
This makes it possible for a self-hosted realm administrator to
directly access a logged-page on the push notifications bouncer
service, enabling billing, support contacts, and other administrator
for enterprise customers to be managed without manual setup.
We're going to need to use this information, so we shouldn't just
assume a value; the client should tell us the actual value.
Conveniently, the Zulip mobile app does already pass this parameter
and has since forever. So we can just start requiring it, with no
compatibility constraint.
Adds request as a parameter to json_success as a refactor towards
making `ignored_parameters_unsupported` functionality available
for all API endpoints.
Also, removes any data parameters that are an empty dict or
a dict with the generic success response values.
django.utils.translation.ugettext is a deprecated alias of
django.utils.translation.gettext as of Django 3.0, and will be removed
in Django 4.0.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Fixes#2665.
Regenerated by tabbott with `lint --fix` after a rebase and change in
parameters.
Note from tabbott: In a few cases, this converts technical debt in the
form of unsorted imports into different technical debt in the form of
our largest files having very long, ugly import sequences at the
start. I expect this change will increase pressure for us to split
those files, which isn't a bad thing.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Automatically generated by the following script, based on the output
of lint with flake8-comma:
import re
import sys
last_filename = None
last_row = None
lines = []
for msg in sys.stdin:
m = re.match(
r"\x1b\[35mflake8 \|\x1b\[0m \x1b\[1;31m(.+):(\d+):(\d+): (\w+)", msg
)
if m:
filename, row_str, col_str, err = m.groups()
row, col = int(row_str), int(col_str)
if filename == last_filename:
assert last_row != row
else:
if last_filename is not None:
with open(last_filename, "w") as f:
f.writelines(lines)
with open(filename) as f:
lines = f.readlines()
last_filename = filename
last_row = row
line = lines[row - 1]
if err in ["C812", "C815"]:
lines[row - 1] = line[: col - 1] + "," + line[col - 1 :]
elif err in ["C819"]:
assert line[col - 2] == ","
lines[row - 1] = line[: col - 2] + line[col - 1 :].lstrip(" ")
if last_filename is not None:
with open(last_filename, "w") as f:
f.writelines(lines)
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
This fixes a bug where we would previously not validate the format of
APNS tokens before writing them to the database, which could lead to
exceptions in the push notifications system if a buggy mobile app
submitted invalid format tokens.
This is an incomplete cleaned-up continuation of Lisa Neigut's push
notification bouncer work. It supports registration and
deregistration of individual push tokens with a central push
notification bouncer server.
It still is missing a few things before we can complete this effort:
* A registration form for server admins to configure their server for
this service, with tests.
* Code (and tests) for actually bouncing the notifications.
Change `from django.utils.timezone import now` to
`from django.utils import timezone`.
This is both because now() is ambiguous (could be datetime.datetime.now),
and more importantly to make it easier to write a lint rule against
datetime.datetime.now().
When we push a device token, we want to clean out any other user's
tokens on the device, but not the current user's. We were wiping
away our own token, if it existed, before creating it again. This
was probably never a user-facing problem; it just made for dead code
and a little unnecessary DB churn. By excluding the current user
from the delete() call, we exercise the update path in our tests now,
so we have 100% coverage.
Anders Kaseorg
Mateusz Mandera
Aman Agrawal
Kenneth Rodrigues
Prakhar Pratyush
Greg Price
Lauryn Menard
Anders Kaseorg
Anders Kaseorg
Tim Abbott
Kiy4h
rht
Anna Liao
Rishi Gupta
Steve Howell
Tim Abbott