zulip/docs/production/email-gateway.md

# Incoming email integration

Zulip's incoming email gateway integration makes it possible to send
messages into Zulip by sending an email.  It's highly recommended
because it enables:

* When users reply to one of Zulip's missed message email
  notifications from their email client, the reply can go directly
  into Zulip.
* Integrating third-party services that can send email notifications
  into Zulip.  See the [integration
  documentation](https://zulip.com/integrations/doc/email) for
  details.

Once this integration is configured, each stream will have a special
email address displayed on the stream settings page.  Emails sent to
that address will be delivered into the stream.

There are two ways to configure Zulip's email gateway:

  1. Local delivery (recommended): A postfix server runs on the Zulip
    server and passes the emails directly to Zulip.
  1. Polling: A cron job running on the Zulip server checks an IMAP
    inbox (`username@example.com`) every minute for new emails.

The local delivery configuration is preferred for production because
it supports nicer looking email addresses and has no cron delay.  The
polling option is convenient for testing/developing this feature
because it doesn't require a public IP address or setting up MX
records in DNS.

```eval_rst
   .. note::
       Incoming emails are rate-limited, with the following limits:

       * 50 emails per minute.
       * 120 emails per 5 minutes.
       * 600 emails per hour.
   ```

## Local delivery setup

Zulip's Puppet configuration provides everything needed to run this
integration; you just need to enable and configure it as follows.

The main decision you need to make is what email domain you want to
use for the gateway; for this discussion we'll use
`emaildomain.example.com`.  The email addresses used by the gateway
will look like `foo@emaildomain.example.com`, so we recommend using
`EXTERNAL_HOST` here.

We will use `hostname.example.com` as the hostname of the Zulip server
(this will usually also be the same as `EXTERNAL_HOST`, unless you are
using an [HTTP reverse proxy][reverse-proxy]).

1. Using your DNS provider, create a DNS MX (mail exchange) record
   configuring email for `emaildomain.example.com` to be processed by
   `hostname.example.com`.  You can check your work using this command:

    ```
    $ dig +short emaildomain.example.com -t MX
    1 hostname.example.com
    ```

1. Log in to your Zulip server; the remaining steps all happen there.

1. Add `, zulip::postfix_localmail` to `puppet_classes` in
   `/etc/zulip/zulip.conf`.  A typical value after this change is:
   ```
   puppet_classes = zulip::profile::standalone, zulip::postfix_localmail
   ```

1.  If `hostname.example.com` is different from
   `emaildomain.example.com`, add a section to `/etc/zulip/zulip.conf`
   on your Zulip server like this:

    ```
    [postfix]
    mailname = emaildomain.example.com
    ```

    This tells postfix to expect to receive emails at addresses ending
    with `@emaildomain.example.com`, overriding the default of
    `@hostname.example.com`.

1. Run `/home/zulip/deployments/current/scripts/zulip-puppet-apply`
   (and answer `y`) to apply your new `/etc/zulip/zulip.conf`
   configuration to your Zulip server.

1. Edit `/etc/zulip/settings.py`, and set `EMAIL_GATEWAY_PATTERN`
   to `"%s@emaildomain.example.com"`.

1. Restart your Zulip server with
   `/home/zulip/deployments/current/scripts/restart-server`.

Congratulations!  The integration should be fully operational.

[reverse-proxy]: ../production/deployment.html#putting-the-zulip-application-behind-a-reverse-proxy

## Polling setup

1. Create an email account dedicated to Zulip's email gateway
  messages.  We assume the address is of the form
  `username@example.com`.  The email provider needs to support the
  standard model of delivering emails sent to
  `username+stuff@example.com` to the `username@example.com` inbox.

1. Edit `/etc/zulip/settings.py`, and set `EMAIL_GATEWAY_PATTERN` to
   `"username+%s@example.com"`.

1. Set up IMAP for your email account and obtain the authentication details.
  ([Here's how it works with Gmail](https://support.google.com/mail/answer/7126229?hl=en))

1. Configure IMAP access in the appropriate Zulip settings:
    * Login and server connection details in `/etc/zulip/settings.py`
      in the email gateway integration section (`EMAIL_GATEWAY_LOGIN` and others).
    * Password in `/etc/zulip/zulip-secrets.conf` as `email_gateway_password`.

1. Install a cron job to poll the inbox every minute for new messages:
    ```
    cd /home/zulip/deployments/current/
    sudo cp puppet/zulip/files/cron.d/email-mirror /etc/cron.d/
    ```

Congratulations!  The integration should be fully operational.