mirror of https://github.com/Desuuuu/klipper.git
1079 lines
53 KiB
C
1079 lines
53 KiB
C
/**
|
|
******************************************************************************
|
|
* @file stm32f0xx_hal_smartcard.h
|
|
* @author MCD Application Team
|
|
* @brief Header file of SMARTCARD HAL module.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
#ifndef __STM32F0xx_HAL_SMARTCARD_H
|
|
#define __STM32F0xx_HAL_SMARTCARD_H
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32f0xx_hal_def.h"
|
|
|
|
/** @addtogroup STM32F0xx_HAL_Driver
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup SMARTCARD
|
|
* @{
|
|
*/
|
|
|
|
/* Exported types ------------------------------------------------------------*/
|
|
/** @defgroup SMARTCARD_Exported_Types SMARTCARD Exported Types
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief SMARTCARD Init Structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
uint32_t BaudRate; /*!< Configures the SmartCard communication baud rate.
|
|
The baud rate register is computed using the following formula:
|
|
Baud Rate Register = ((PCLKx) / ((hsmartcard->Init.BaudRate))) */
|
|
|
|
uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
|
|
This parameter @ref SMARTCARD_Word_Length can only be set to 9 (8 data + 1 parity bits). */
|
|
|
|
uint32_t StopBits; /*!< Specifies the number of stop bits.
|
|
This parameter can be a value of @ref SMARTCARD_Stop_Bits. */
|
|
|
|
uint16_t Parity; /*!< Specifies the parity mode.
|
|
This parameter can be a value of @ref SMARTCARD_Parity
|
|
@note The parity is enabled by default (PCE is forced to 1).
|
|
Since the WordLength is forced to 8 bits + parity, M is
|
|
forced to 1 and the parity bit is the 9th bit. */
|
|
|
|
uint16_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
|
|
This parameter can be a value of @ref SMARTCARD_Mode */
|
|
|
|
uint16_t CLKPolarity; /*!< Specifies the steady state of the serial clock.
|
|
This parameter can be a value of @ref SMARTCARD_Clock_Polarity */
|
|
|
|
uint16_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made.
|
|
This parameter can be a value of @ref SMARTCARD_Clock_Phase */
|
|
|
|
uint16_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted
|
|
data bit (MSB) has to be output on the SCLK pin in synchronous mode.
|
|
This parameter can be a value of @ref SMARTCARD_Last_Bit */
|
|
|
|
uint16_t OneBitSampling; /*!< Specifies whether a single sample or three samples' majority vote is selected.
|
|
Selecting the single sample method increases the receiver tolerance to clock
|
|
deviations. This parameter can be a value of @ref SMARTCARD_OneBit_Sampling. */
|
|
|
|
uint8_t Prescaler; /*!< Specifies the SmartCard Prescaler. */
|
|
|
|
uint8_t GuardTime; /*!< Specifies the SmartCard Guard Time applied after stop bits. */
|
|
|
|
uint16_t NACKEnable; /*!< Specifies whether the SmartCard NACK transmission is enabled
|
|
in case of parity error.
|
|
This parameter can be a value of @ref SMARTCARD_NACK_Enable */
|
|
|
|
uint32_t TimeOutEnable; /*!< Specifies whether the receiver timeout is enabled.
|
|
This parameter can be a value of @ref SMARTCARD_Timeout_Enable*/
|
|
|
|
uint32_t TimeOutValue; /*!< Specifies the receiver time out value in number of baud blocks:
|
|
it is used to implement the Character Wait Time (CWT) and
|
|
Block Wait Time (BWT). It is coded over 24 bits. */
|
|
|
|
uint8_t BlockLength; /*!< Specifies the SmartCard Block Length in T=1 Reception mode.
|
|
This parameter can be any value from 0x0 to 0xFF */
|
|
|
|
uint8_t AutoRetryCount; /*!< Specifies the SmartCard auto-retry count (number of retries in
|
|
receive and transmit mode). When set to 0, retransmission is
|
|
disabled. Otherwise, its maximum value is 7 (before signalling
|
|
an error) */
|
|
|
|
}SMARTCARD_InitTypeDef;
|
|
|
|
/**
|
|
* @brief SMARTCARD advanced features initalization structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
uint32_t AdvFeatureInit; /*!< Specifies which advanced SMARTCARD features is initialized. Several
|
|
advanced features may be initialized at the same time. This parameter
|
|
can be a value of @ref SMARTCARD_Advanced_Features_Initialization_Type */
|
|
|
|
uint32_t TxPinLevelInvert; /*!< Specifies whether the TX pin active level is inverted.
|
|
This parameter can be a value of @ref SMARTCARD_Tx_Inv */
|
|
|
|
uint32_t RxPinLevelInvert; /*!< Specifies whether the RX pin active level is inverted.
|
|
This parameter can be a value of @ref SMARTCARD_Rx_Inv */
|
|
|
|
uint32_t DataInvert; /*!< Specifies whether data are inverted (positive/direct logic
|
|
vs negative/inverted logic).
|
|
This parameter can be a value of @ref SMARTCARD_Data_Inv */
|
|
|
|
uint32_t Swap; /*!< Specifies whether TX and RX pins are swapped.
|
|
This parameter can be a value of @ref SMARTCARD_Rx_Tx_Swap */
|
|
|
|
uint32_t OverrunDisable; /*!< Specifies whether the reception overrun detection is disabled.
|
|
This parameter can be a value of @ref SMARTCARD_Overrun_Disable */
|
|
|
|
uint32_t DMADisableonRxError; /*!< Specifies whether the DMA is disabled in case of reception error.
|
|
This parameter can be a value of @ref SMARTCARD_DMA_Disable_on_Rx_Error */
|
|
|
|
uint32_t MSBFirst; /*!< Specifies whether MSB is sent first on UART line.
|
|
This parameter can be a value of @ref SMARTCARD_MSB_First */
|
|
}SMARTCARD_AdvFeatureInitTypeDef;
|
|
|
|
/**
|
|
* @brief HAL SMARTCARD State structures definition
|
|
* @note HAL SMARTCARD State value is a combination of 2 different substates: gState and RxState.
|
|
* - gState contains SMARTCARD state information related to global Handle management
|
|
* and also information related to Tx operations.
|
|
* gState value coding follow below described bitmap :
|
|
* b7-b6 Error information
|
|
* 00 : No Error
|
|
* 01 : (Not Used)
|
|
* 10 : Timeout
|
|
* 11 : Error
|
|
* b5 IP initilisation status
|
|
* 0 : Reset (IP not initialized)
|
|
* 1 : Init done (IP not initialized. HAL SMARTCARD Init function already called)
|
|
* b4-b3 (not used)
|
|
* xx : Should be set to 00
|
|
* b2 Intrinsic process state
|
|
* 0 : Ready
|
|
* 1 : Busy (IP busy with some configuration or internal operations)
|
|
* b1 (not used)
|
|
* x : Should be set to 0
|
|
* b0 Tx state
|
|
* 0 : Ready (no Tx operation ongoing)
|
|
* 1 : Busy (Tx operation ongoing)
|
|
* - RxState contains information related to Rx operations.
|
|
* RxState value coding follow below described bitmap :
|
|
* b7-b6 (not used)
|
|
* xx : Should be set to 00
|
|
* b5 IP initilisation status
|
|
* 0 : Reset (IP not initialized)
|
|
* 1 : Init done (IP not initialized)
|
|
* b4-b2 (not used)
|
|
* xxx : Should be set to 000
|
|
* b1 Rx state
|
|
* 0 : Ready (no Rx operation ongoing)
|
|
* 1 : Busy (Rx operation ongoing)
|
|
* b0 (not used)
|
|
* x : Should be set to 0.
|
|
*/
|
|
typedef enum
|
|
{
|
|
HAL_SMARTCARD_STATE_RESET = 0x00U, /*!< Peripheral is not initialized
|
|
Value is allowed for gState and RxState */
|
|
HAL_SMARTCARD_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use
|
|
Value is allowed for gState and RxState */
|
|
HAL_SMARTCARD_STATE_BUSY = 0x24U, /*!< an internal process is ongoing
|
|
Value is allowed for gState only */
|
|
HAL_SMARTCARD_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing
|
|
Value is allowed for gState only */
|
|
HAL_SMARTCARD_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing
|
|
Value is allowed for RxState only */
|
|
HAL_SMARTCARD_STATE_BUSY_TX_RX = 0x23U, /*!< Data Transmission and Reception process is ongoing
|
|
Not to be used for neither gState nor RxState.
|
|
Value is result of combination (Or) between gState and RxState values */
|
|
HAL_SMARTCARD_STATE_TIMEOUT = 0xA0U, /*!< Timeout state
|
|
Value is allowed for gState only */
|
|
HAL_SMARTCARD_STATE_ERROR = 0xE0U /*!< Error
|
|
Value is allowed for gState only */
|
|
}HAL_SMARTCARD_StateTypeDef;
|
|
|
|
/**
|
|
* @brief SMARTCARD clock sources
|
|
*/
|
|
typedef enum
|
|
{
|
|
SMARTCARD_CLOCKSOURCE_PCLK1 = 0x00U, /*!< PCLK1 clock source */
|
|
SMARTCARD_CLOCKSOURCE_HSI = 0x02U, /*!< HSI clock source */
|
|
SMARTCARD_CLOCKSOURCE_SYSCLK = 0x04U, /*!< SYSCLK clock source */
|
|
SMARTCARD_CLOCKSOURCE_LSE = 0x08U, /*!< LSE clock source */
|
|
SMARTCARD_CLOCKSOURCE_UNDEFINED = 0x10U /*!< undefined clock source */
|
|
}SMARTCARD_ClockSourceTypeDef;
|
|
|
|
/**
|
|
* @brief SMARTCARD handle Structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
USART_TypeDef *Instance; /*!< USART registers base address */
|
|
|
|
SMARTCARD_InitTypeDef Init; /*!< SmartCard communication parameters */
|
|
|
|
SMARTCARD_AdvFeatureInitTypeDef AdvancedInit; /*!< SmartCard advanced features initialization parameters */
|
|
|
|
uint8_t *pTxBuffPtr; /*!< Pointer to SmartCard Tx transfer Buffer */
|
|
|
|
uint16_t TxXferSize; /*!< SmartCard Tx Transfer size */
|
|
|
|
__IO uint16_t TxXferCount; /*!< SmartCard Tx Transfer Counter */
|
|
|
|
uint8_t *pRxBuffPtr; /*!< Pointer to SmartCard Rx transfer Buffer */
|
|
|
|
uint16_t RxXferSize; /*!< SmartCard Rx Transfer size */
|
|
|
|
__IO uint16_t RxXferCount; /*!< SmartCard Rx Transfer Counter */
|
|
|
|
DMA_HandleTypeDef *hdmatx; /*!< SmartCard Tx DMA Handle parameters */
|
|
|
|
DMA_HandleTypeDef *hdmarx; /*!< SmartCard Rx DMA Handle parameters */
|
|
|
|
HAL_LockTypeDef Lock; /*!< Locking object */
|
|
|
|
__IO HAL_SMARTCARD_StateTypeDef gState; /*!< SmartCard state information related to global Handle management
|
|
and also related to Tx operations.
|
|
This parameter can be a value of @ref HAL_SMARTCARD_StateTypeDef */
|
|
|
|
__IO HAL_SMARTCARD_StateTypeDef RxState; /*!< SmartCard state information related to Rx operations.
|
|
This parameter can be a value of @ref HAL_SMARTCARD_StateTypeDef */
|
|
|
|
__IO uint32_t ErrorCode; /*!< SmartCard Error code
|
|
This parameter can be a value of @ref SMARTCARD_Error */
|
|
|
|
}SMARTCARD_HandleTypeDef;
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported constants --------------------------------------------------------*/
|
|
/** @defgroup SMARTCARD_Exported_Constants SMARTCARD Exported Constants
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup SMARTCARD_Error SMARTCARD Error
|
|
* @{
|
|
*/
|
|
#define HAL_SMARTCARD_ERROR_NONE (0x00000000U) /*!< No error */
|
|
#define HAL_SMARTCARD_ERROR_PE (0x00000001U) /*!< Parity error */
|
|
#define HAL_SMARTCARD_ERROR_NE (0x00000002U) /*!< Noise error */
|
|
#define HAL_SMARTCARD_ERROR_FE (0x00000004U) /*!< frame error */
|
|
#define HAL_SMARTCARD_ERROR_ORE (0x00000008U) /*!< Overrun error */
|
|
#define HAL_SMARTCARD_ERROR_DMA (0x00000010U) /*!< DMA transfer error */
|
|
#define HAL_SMARTCARD_ERROR_RTO (0x00000020U) /*!< Receiver TimeOut error */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SMARTCARD_Word_Length SMARTCARD Word Length
|
|
* @{
|
|
*/
|
|
#if defined (USART_CR1_M0)
|
|
#define SMARTCARD_WORDLENGTH_9B ((uint32_t)USART_CR1_M0) /*!< SMARTCARD frame length */
|
|
#else
|
|
#define SMARTCARD_WORDLENGTH_9B ((uint32_t)USART_CR1_M) /*!< SMARTCARD frame length */
|
|
#endif
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SMARTCARD_Stop_Bits SMARTCARD Number of Stop Bits
|
|
* @{
|
|
*/
|
|
#define SMARTCARD_STOPBITS_0_5 ((uint32_t)USART_CR2_STOP_0) /*!< SMARTCARD frame with 0.5 stop bit */
|
|
#define SMARTCARD_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP_0 | USART_CR2_STOP_1)) /*!< SMARTCARD frame with 1.5 stop bits */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SMARTCARD_Parity SMARTCARD Parity
|
|
* @{
|
|
*/
|
|
#define SMARTCARD_PARITY_EVEN ((uint32_t)USART_CR1_PCE) /*!< SMARTCARD frame even parity */
|
|
#define SMARTCARD_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS)) /*!< SMARTCARD frame odd parity */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SMARTCARD_Mode SMARTCARD Transfer Mode
|
|
* @{
|
|
*/
|
|
#define SMARTCARD_MODE_RX ((uint32_t)USART_CR1_RE) /*!< SMARTCARD RX mode */
|
|
#define SMARTCARD_MODE_TX ((uint32_t)USART_CR1_TE) /*!< SMARTCARD TX mode */
|
|
#define SMARTCARD_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE)) /*!< SMARTCARD RX and TX mode */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SMARTCARD_Clock_Polarity SMARTCARD Clock Polarity
|
|
* @{
|
|
*/
|
|
#define SMARTCARD_POLARITY_LOW (0x00000000U) /*!< SMARTCARD frame low polarity */
|
|
#define SMARTCARD_POLARITY_HIGH ((uint32_t)USART_CR2_CPOL) /*!< SMARTCARD frame high polarity */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SMARTCARD_Clock_Phase SMARTCARD Clock Phase
|
|
* @{
|
|
*/
|
|
#define SMARTCARD_PHASE_1EDGE (0x00000000U) /*!< SMARTCARD frame phase on first clock transition */
|
|
#define SMARTCARD_PHASE_2EDGE ((uint32_t)USART_CR2_CPHA) /*!< SMARTCARD frame phase on second clock transition */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SMARTCARD_Last_Bit SMARTCARD Last Bit
|
|
* @{
|
|
*/
|
|
#define SMARTCARD_LASTBIT_DISABLE (0x00000000U) /*!< SMARTCARD frame last data bit clock pulse not output to SCLK pin */
|
|
#define SMARTCARD_LASTBIT_ENABLE ((uint32_t)USART_CR2_LBCL) /*!< SMARTCARD frame last data bit clock pulse output to SCLK pin */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SMARTCARD_OneBit_Sampling SMARTCARD One Bit Sampling Method
|
|
* @{
|
|
*/
|
|
#define SMARTCARD_ONE_BIT_SAMPLE_DISABLE (0x00000000U) /*!< SMARTCARD frame one-bit sample disabled */
|
|
#define SMARTCARD_ONE_BIT_SAMPLE_ENABLE ((uint32_t)USART_CR3_ONEBIT) /*!< SMARTCARD frame one-bit sample enabled */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
|
|
/** @defgroup SMARTCARD_NACK_Enable SMARTCARD NACK Enable
|
|
* @{
|
|
*/
|
|
#define SMARTCARD_NACK_ENABLE ((uint32_t)USART_CR3_NACK) /*!< SMARTCARD NACK transmission disabled */
|
|
#define SMARTCARD_NACK_DISABLE (0x00000000U) /*!< SMARTCARD NACK transmission enabled */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SMARTCARD_Timeout_Enable SMARTCARD Timeout Enable
|
|
* @{
|
|
*/
|
|
#define SMARTCARD_TIMEOUT_DISABLE (0x00000000U) /*!< SMARTCARD receiver timeout disabled */
|
|
#define SMARTCARD_TIMEOUT_ENABLE ((uint32_t)USART_CR2_RTOEN) /*!< SMARTCARD receiver timeout enabled */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SMARTCARD_Advanced_Features_Initialization_Type SMARTCARD advanced feature initialization type
|
|
* @{
|
|
*/
|
|
#define SMARTCARD_ADVFEATURE_NO_INIT (0x00000000U) /*!< No advanced feature initialization */
|
|
#define SMARTCARD_ADVFEATURE_TXINVERT_INIT (0x00000001U) /*!< TX pin active level inversion */
|
|
#define SMARTCARD_ADVFEATURE_RXINVERT_INIT (0x00000002U) /*!< RX pin active level inversion */
|
|
#define SMARTCARD_ADVFEATURE_DATAINVERT_INIT (0x00000004U) /*!< Binary data inversion */
|
|
#define SMARTCARD_ADVFEATURE_SWAP_INIT (0x00000008U) /*!< TX/RX pins swap */
|
|
#define SMARTCARD_ADVFEATURE_RXOVERRUNDISABLE_INIT (0x00000010U) /*!< RX overrun disable */
|
|
#define SMARTCARD_ADVFEATURE_DMADISABLEONERROR_INIT (0x00000020U) /*!< DMA disable on Reception Error */
|
|
#define SMARTCARD_ADVFEATURE_MSBFIRST_INIT (0x00000080U) /*!< Most significant bit sent/received first */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SMARTCARD_Tx_Inv SMARTCARD advanced feature TX pin active level inversion
|
|
* @{
|
|
*/
|
|
#define SMARTCARD_ADVFEATURE_TXINV_DISABLE (0x00000000U) /*!< TX pin active level inversion disable */
|
|
#define SMARTCARD_ADVFEATURE_TXINV_ENABLE ((uint32_t)USART_CR2_TXINV) /*!< TX pin active level inversion enable */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SMARTCARD_Rx_Inv SMARTCARD advanced feature RX pin active level inversion
|
|
* @{
|
|
*/
|
|
#define SMARTCARD_ADVFEATURE_RXINV_DISABLE (0x00000000U) /*!< RX pin active level inversion disable */
|
|
#define SMARTCARD_ADVFEATURE_RXINV_ENABLE ((uint32_t)USART_CR2_RXINV) /*!< RX pin active level inversion enable */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SMARTCARD_Data_Inv SMARTCARD advanced feature Binary Data inversion
|
|
* @{
|
|
*/
|
|
#define SMARTCARD_ADVFEATURE_DATAINV_DISABLE (0x00000000U) /*!< Binary data inversion disable */
|
|
#define SMARTCARD_ADVFEATURE_DATAINV_ENABLE ((uint32_t)USART_CR2_DATAINV) /*!< Binary data inversion enable */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SMARTCARD_Rx_Tx_Swap SMARTCARD advanced feature RX TX pins swap
|
|
* @{
|
|
*/
|
|
#define SMARTCARD_ADVFEATURE_SWAP_DISABLE (0x00000000U) /*!< TX/RX pins swap disable */
|
|
#define SMARTCARD_ADVFEATURE_SWAP_ENABLE ((uint32_t)USART_CR2_SWAP) /*!< TX/RX pins swap enable */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SMARTCARD_Overrun_Disable SMARTCARD advanced feature Overrun Disable
|
|
* @{
|
|
*/
|
|
#define SMARTCARD_ADVFEATURE_OVERRUN_ENABLE (0x00000000U) /*!< RX overrun enable */
|
|
#define SMARTCARD_ADVFEATURE_OVERRUN_DISABLE ((uint32_t)USART_CR3_OVRDIS) /*!< RX overrun disable */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SMARTCARD_DMA_Disable_on_Rx_Error SMARTCARD advanced feature DMA Disable on Rx Error
|
|
* @{
|
|
*/
|
|
#define SMARTCARD_ADVFEATURE_DMA_ENABLEONRXERROR (0x00000000U) /*!< DMA enable on Reception Error */
|
|
#define SMARTCARD_ADVFEATURE_DMA_DISABLEONRXERROR ((uint32_t)USART_CR3_DDRE) /*!< DMA disable on Reception Error */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SMARTCARD_MSB_First SMARTCARD advanced feature MSB first
|
|
* @{
|
|
*/
|
|
#define SMARTCARD_ADVFEATURE_MSBFIRST_DISABLE (0x00000000U) /*!< Most significant bit sent/received first disable */
|
|
#define SMARTCARD_ADVFEATURE_MSBFIRST_ENABLE ((uint32_t)USART_CR2_MSBFIRST) /*!< Most significant bit sent/received first enable */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SMARTCARD_Flags SMARTCARD Flags
|
|
* Elements values convention: 0xXXXX
|
|
* - 0xXXXX : Flag mask in the ISR register
|
|
* @{
|
|
*/
|
|
#define SMARTCARD_FLAG_REACK USART_ISR_REACK /*!< SMARTCARD receive enable acknowledge flag */
|
|
#define SMARTCARD_FLAG_TEACK USART_ISR_TEACK /*!< SMARTCARD transmit enable acknowledge flag */
|
|
#define SMARTCARD_FLAG_BUSY USART_ISR_BUSY /*!< SMARTCARD busy flag */
|
|
#define SMARTCARD_FLAG_EOBF USART_ISR_EOBF /*!< SMARTCARD end of block flag */
|
|
#define SMARTCARD_FLAG_RTOF USART_ISR_RTOF /*!< SMARTCARD receiver timeout flag */
|
|
#define SMARTCARD_FLAG_TXE USART_ISR_TXE /*!< SMARTCARD transmit data register empty */
|
|
#define SMARTCARD_FLAG_TC USART_ISR_TC /*!< SMARTCARD transmission complete */
|
|
#define SMARTCARD_FLAG_RXNE USART_ISR_RXNE /*!< SMARTCARD read data register not empty */
|
|
#define SMARTCARD_FLAG_IDLE USART_ISR_IDLE /*!< SMARTCARD idle line detection */
|
|
#define SMARTCARD_FLAG_ORE USART_ISR_ORE /*!< SMARTCARD overrun error */
|
|
#define SMARTCARD_FLAG_NE USART_ISR_NE /*!< SMARTCARD noise error */
|
|
#define SMARTCARD_FLAG_FE USART_ISR_FE /*!< SMARTCARD frame error */
|
|
#define SMARTCARD_FLAG_PE USART_ISR_PE /*!< SMARTCARD parity error */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SMARTCARD_Interrupt_definition SMARTCARD Interrupts Definition
|
|
* Elements values convention: 0000ZZZZ0XXYYYYYb
|
|
* - YYYYY : Interrupt source position in the XX register (5bits)
|
|
* - XX : Interrupt source register (2bits)
|
|
* - 01: CR1 register
|
|
* - 10: CR2 register
|
|
* - 11: CR3 register
|
|
* - ZZZZ : Flag position in the ISR register(4bits)
|
|
* @{
|
|
*/
|
|
|
|
#define SMARTCARD_IT_PE ((uint16_t)0x0028U) /*!< SMARTCARD parity error interruption */
|
|
#define SMARTCARD_IT_TXE ((uint16_t)0x0727U) /*!< SMARTCARD transmit data register empty interruption */
|
|
#define SMARTCARD_IT_TC ((uint16_t)0x0626U) /*!< SMARTCARD transmission complete interruption */
|
|
#define SMARTCARD_IT_RXNE ((uint16_t)0x0525U) /*!< SMARTCARD read data register not empty interruption */
|
|
#define SMARTCARD_IT_IDLE ((uint16_t)0x0424U) /*!< SMARTCARD idle line detection interruption */
|
|
|
|
#define SMARTCARD_IT_ERR ((uint16_t)0x0060U) /*!< SMARTCARD error interruption */
|
|
#define SMARTCARD_IT_ORE ((uint16_t)0x0300U) /*!< SMARTCARD overrun error interruption */
|
|
#define SMARTCARD_IT_NE ((uint16_t)0x0200U) /*!< SMARTCARD noise error interruption */
|
|
#define SMARTCARD_IT_FE ((uint16_t)0x0100U) /*!< SMARTCARD frame error interruption */
|
|
|
|
#define SMARTCARD_IT_EOB ((uint16_t)0x0C3BU) /*!< SMARTCARD end of block interruption */
|
|
#define SMARTCARD_IT_RTO ((uint16_t)0x0B3AU) /*!< SMARTCARD receiver timeout interruption */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SMARTCARD_IT_CLEAR_Flags SMARTCARD Interruption Clear Flags
|
|
* @{
|
|
*/
|
|
#define SMARTCARD_CLEAR_PEF USART_ICR_PECF /*!< SMARTCARD parity error clear flag */
|
|
#define SMARTCARD_CLEAR_FEF USART_ICR_FECF /*!< SMARTCARD framing error clear flag */
|
|
#define SMARTCARD_CLEAR_NEF USART_ICR_NCF /*!< SMARTCARD noise detected clear flag */
|
|
#define SMARTCARD_CLEAR_OREF USART_ICR_ORECF /*!< SMARTCARD overrun error clear flag */
|
|
#define SMARTCARD_CLEAR_IDLEF USART_ICR_IDLECF /*!< SMARTCARD idle line detected clear flag */
|
|
#define SMARTCARD_CLEAR_TCF USART_ICR_TCCF /*!< SMARTCARD transmission complete clear flag */
|
|
#define SMARTCARD_CLEAR_RTOF USART_ICR_RTOCF /*!< SMARTCARD receiver time out clear flag */
|
|
#define SMARTCARD_CLEAR_EOBF USART_ICR_EOBCF /*!< SMARTCARD end of block clear flag */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SMARTCARD_CR3_SCARCNT_LSB_POS SMARTCARD auto retry counter LSB position in CR3 register
|
|
* @{
|
|
*/
|
|
#define SMARTCARD_CR3_SCARCNT_LSB_POS ( 17U) /*!< SMARTCARD auto retry counter LSB position in CR3 register */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SMARTCARD_GTPR_GT_LSB_POS SMARTCARD guard time value LSB position in GTPR register
|
|
* @{
|
|
*/
|
|
#define SMARTCARD_GTPR_GT_LSB_POS ( 8U) /*!< SMARTCARD guard time value LSB position in GTPR register */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SMARTCARD_RTOR_BLEN_LSB_POS SMARTCARD block length LSB position in RTOR register
|
|
* @{
|
|
*/
|
|
#define SMARTCARD_RTOR_BLEN_LSB_POS ( 24U) /*!< SMARTCARD block length LSB position in RTOR register */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SMARTCARD_Interruption_Mask SMARTCARD interruptions flags mask
|
|
* @{
|
|
*/
|
|
#define SMARTCARD_IT_MASK ((uint16_t)0x001FU) /*!< SMARTCARD interruptions flags mask */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SMARTCARD_Request_Parameters SMARTCARD Request Parameters
|
|
* @{
|
|
*/
|
|
#define SMARTCARD_RXDATA_FLUSH_REQUEST ((uint16_t)USART_RQR_RXFRQ) /*!< Receive data flush request */
|
|
#define SMARTCARD_TXDATA_FLUSH_REQUEST ((uint16_t)USART_RQR_TXFRQ) /*!< Transmit data flush request */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported macros -----------------------------------------------------------*/
|
|
/** @defgroup SMARTCARD_Exported_Macros SMARTCARD Exported Macros
|
|
* @{
|
|
*/
|
|
|
|
/** @brief Reset SMARTCARD handle states.
|
|
* @param __HANDLE__ SMARTCARD handle.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_SMARTCARD_RESET_HANDLE_STATE(__HANDLE__) do{ \
|
|
(__HANDLE__)->gState = HAL_SMARTCARD_STATE_RESET; \
|
|
(__HANDLE__)->RxState = HAL_SMARTCARD_STATE_RESET; \
|
|
} while(0U)
|
|
|
|
/** @brief Flush the Smartcard Data registers.
|
|
* @param __HANDLE__ specifies the SMARTCARD Handle.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_SMARTCARD_FLUSH_DRREGISTER(__HANDLE__) \
|
|
do{ \
|
|
SET_BIT((__HANDLE__)->Instance->RQR, SMARTCARD_RXDATA_FLUSH_REQUEST); \
|
|
SET_BIT((__HANDLE__)->Instance->RQR, SMARTCARD_TXDATA_FLUSH_REQUEST); \
|
|
} while(0U)
|
|
|
|
/** @brief Clear the specified SMARTCARD pending flag.
|
|
* @param __HANDLE__ specifies the SMARTCARD Handle.
|
|
* @param __FLAG__ specifies the flag to check.
|
|
* This parameter can be any combination of the following values:
|
|
* @arg @ref SMARTCARD_CLEAR_PEF Parity error clear flag
|
|
* @arg @ref SMARTCARD_CLEAR_FEF Framing error clear flag
|
|
* @arg @ref SMARTCARD_CLEAR_NEF Noise detected clear flag
|
|
* @arg @ref SMARTCARD_CLEAR_OREF OverRun error clear flag
|
|
* @arg @ref SMARTCARD_CLEAR_IDLEF Idle line detected clear flag
|
|
* @arg @ref SMARTCARD_CLEAR_TCF Transmission complete clear flag
|
|
* @arg @ref SMARTCARD_CLEAR_RTOF Receiver timeout clear flag
|
|
* @arg @ref SMARTCARD_CLEAR_EOBF End of block clear flag
|
|
* @retval None
|
|
*/
|
|
#define __HAL_SMARTCARD_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))
|
|
|
|
/** @brief Clear the SMARTCARD PE pending flag.
|
|
* @param __HANDLE__ specifies the SMARTCARD Handle.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_PEF)
|
|
|
|
|
|
/** @brief Clear the SMARTCARD FE pending flag.
|
|
* @param __HANDLE__ specifies the SMARTCARD Handle.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_SMARTCARD_CLEAR_FEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_FEF)
|
|
|
|
/** @brief Clear the SMARTCARD NE pending flag.
|
|
* @param __HANDLE__ specifies the SMARTCARD Handle.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_SMARTCARD_CLEAR_NEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_NEF)
|
|
|
|
/** @brief Clear the SMARTCARD ORE pending flag.
|
|
* @param __HANDLE__ specifies the SMARTCARD Handle.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_SMARTCARD_CLEAR_OREFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_OREF)
|
|
|
|
/** @brief Clear the SMARTCARD IDLE pending flag.
|
|
* @param __HANDLE__ specifies the SMARTCARD Handle.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_SMARTCARD_CLEAR_IDLEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_IDLEF)
|
|
|
|
/** @brief Check whether the specified Smartcard flag is set or not.
|
|
* @param __HANDLE__ specifies the SMARTCARD Handle.
|
|
* @param __FLAG__ specifies the flag to check.
|
|
* This parameter can be one of the following values:
|
|
* @arg @ref SMARTCARD_FLAG_REACK Receive enable acknowledge flag
|
|
* @arg @ref SMARTCARD_FLAG_TEACK Transmit enable acknowledge flag
|
|
* @arg @ref SMARTCARD_FLAG_BUSY Busy flag
|
|
* @arg @ref SMARTCARD_FLAG_EOBF End of block flag
|
|
* @arg @ref SMARTCARD_FLAG_RTOF Receiver timeout flag
|
|
* @arg @ref SMARTCARD_FLAG_TXE Transmit data register empty flag
|
|
* @arg @ref SMARTCARD_FLAG_TC Transmission complete flag
|
|
* @arg @ref SMARTCARD_FLAG_RXNE Receive data register not empty flag
|
|
* @arg @ref SMARTCARD_FLAG_IDLE Idle line detection flag
|
|
* @arg @ref SMARTCARD_FLAG_ORE Overrun error flag
|
|
* @arg @ref SMARTCARD_FLAG_NE Noise error flag
|
|
* @arg @ref SMARTCARD_FLAG_FE Framing error flag
|
|
* @arg @ref SMARTCARD_FLAG_PE Parity error flag
|
|
* @retval The new state of __FLAG__ (TRUE or FALSE).
|
|
*/
|
|
#define __HAL_SMARTCARD_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__))
|
|
|
|
|
|
/** @brief Enable the specified SmartCard interrupt.
|
|
* @param __HANDLE__ specifies the SMARTCARD Handle.
|
|
* @param __INTERRUPT__ specifies the SMARTCARD interrupt to enable.
|
|
* This parameter can be one of the following values:
|
|
* @arg @ref SMARTCARD_IT_EOB End of block interrupt
|
|
* @arg @ref SMARTCARD_IT_RTO Receive timeout interrupt
|
|
* @arg @ref SMARTCARD_IT_TXE Transmit data register empty interrupt
|
|
* @arg @ref SMARTCARD_IT_TC Transmission complete interrupt
|
|
* @arg @ref SMARTCARD_IT_RXNE Receive data register not empty interrupt
|
|
* @arg @ref SMARTCARD_IT_IDLE Idle line detection interrupt
|
|
* @arg @ref SMARTCARD_IT_PE Parity error interrupt
|
|
* @arg @ref SMARTCARD_IT_ERR Error interrupt(frame error, noise error, overrun error)
|
|
* @retval None
|
|
*/
|
|
#define __HAL_SMARTCARD_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((__INTERRUPT__) & 0xFFU) >> 5U) == 1U)? ((__HANDLE__)->Instance->CR1 |= (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
|
|
((((__INTERRUPT__) & 0xFFU) >> 5U) == 2U)? ((__HANDLE__)->Instance->CR2 |= (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
|
|
((__HANDLE__)->Instance->CR3 |= (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))))
|
|
|
|
/** @brief Disable the specified SmartCard interrupt.
|
|
* @param __HANDLE__ specifies the SMARTCARD Handle.
|
|
* @param __INTERRUPT__ specifies the SMARTCARD interrupt to disable.
|
|
* This parameter can be one of the following values:
|
|
* @arg @ref SMARTCARD_IT_EOB End of block interrupt
|
|
* @arg @ref SMARTCARD_IT_RTO Receive timeout interrupt
|
|
* @arg @ref SMARTCARD_IT_TXE Transmit data register empty interrupt
|
|
* @arg @ref SMARTCARD_IT_TC Transmission complete interrupt
|
|
* @arg @ref SMARTCARD_IT_RXNE Receive data register not empty interrupt
|
|
* @arg @ref SMARTCARD_IT_IDLE Idle line detection interrupt
|
|
* @arg @ref SMARTCARD_IT_PE Parity error interrupt
|
|
* @arg @ref SMARTCARD_IT_ERR Error interrupt(frame error, noise error, overrun error)
|
|
* @retval None
|
|
*/
|
|
#define __HAL_SMARTCARD_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((__INTERRUPT__) & 0xFFU) >> 5U) == 1U)? ((__HANDLE__)->Instance->CR1 &= ~ (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
|
|
((((__INTERRUPT__) & 0xFFU) >> 5U) == 2U)? ((__HANDLE__)->Instance->CR2 &= ~ (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
|
|
((__HANDLE__)->Instance->CR3 &= ~ (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))))
|
|
|
|
|
|
/** @brief Check whether the specified SmartCard interrupt has occurred or not.
|
|
* @param __HANDLE__ specifies the SMARTCARD Handle.
|
|
* @param __IT__ specifies the SMARTCARD interrupt to check.
|
|
* This parameter can be one of the following values:
|
|
* @arg @ref SMARTCARD_IT_EOB End of block interrupt
|
|
* @arg @ref SMARTCARD_IT_RTO Receive timeout interrupt
|
|
* @arg @ref SMARTCARD_IT_TXE Transmit data register empty interrupt
|
|
* @arg @ref SMARTCARD_IT_TC Transmission complete interrupt
|
|
* @arg @ref SMARTCARD_IT_RXNE Receive data register not empty interrupt
|
|
* @arg @ref SMARTCARD_IT_IDLE Idle line detection interrupt
|
|
* @arg @ref SMARTCARD_IT_ORE Overrun error interrupt
|
|
* @arg @ref SMARTCARD_IT_NE Noise error interrupt
|
|
* @arg @ref SMARTCARD_IT_FE Framing error interrupt
|
|
* @arg @ref SMARTCARD_IT_PE Parity error interrupt
|
|
* @retval The new state of __IT__ (TRUE or FALSE).
|
|
*/
|
|
#define __HAL_SMARTCARD_GET_IT(__HANDLE__, __IT__) ((__HANDLE__)->Instance->ISR & (1U << ((__IT__)>> 0x08U)))
|
|
|
|
/** @brief Check whether the specified SmartCard interrupt source is enabled or not.
|
|
* @param __HANDLE__ specifies the SMARTCARD Handle.
|
|
* @param __IT__ specifies the SMARTCARD interrupt source to check.
|
|
* This parameter can be one of the following values:
|
|
* @arg @ref SMARTCARD_IT_EOB End of block interrupt
|
|
* @arg @ref SMARTCARD_IT_RTO Receive timeout interrupt
|
|
* @arg @ref SMARTCARD_IT_TXE Transmit data register empty interrupt
|
|
* @arg @ref SMARTCARD_IT_TC Transmission complete interrupt
|
|
* @arg @ref SMARTCARD_IT_RXNE Receive data register not empty interrupt
|
|
* @arg @ref SMARTCARD_IT_IDLE Idle line detection interrupt
|
|
* @arg @ref SMARTCARD_IT_ERR Framing, overrun or noise error interrupt
|
|
* @arg @ref SMARTCARD_IT_PE Parity error interrupt
|
|
* @retval The new state of __IT__ (TRUE or FALSE).
|
|
*/
|
|
#define __HAL_SMARTCARD_GET_IT_SOURCE(__HANDLE__, __IT__) ((((((__IT__) & 0xFFU) >> 5U) == 1U)? (__HANDLE__)->Instance->CR1 : \
|
|
(((((__IT__) & 0xFFU) >> 5U) == 2U)? (__HANDLE__)->Instance->CR2 : \
|
|
(__HANDLE__)->Instance->CR3)) & (1U << (((uint16_t)(__IT__)) & SMARTCARD_IT_MASK)))
|
|
|
|
|
|
/** @brief Clear the specified SMARTCARD ISR flag, in setting the proper ICR register flag.
|
|
* @param __HANDLE__ specifies the SMARTCARD Handle.
|
|
* @param __IT_CLEAR__ specifies the interrupt clear register flag that needs to be set
|
|
* to clear the corresponding interrupt.
|
|
* This parameter can be one of the following values:
|
|
* @arg @ref SMARTCARD_CLEAR_PEF Parity error clear flag
|
|
* @arg @ref SMARTCARD_CLEAR_FEF Framing error clear flag
|
|
* @arg @ref SMARTCARD_CLEAR_NEF Noise detected clear flag
|
|
* @arg @ref SMARTCARD_CLEAR_OREF OverRun error clear flag
|
|
* @arg @ref SMARTCARD_CLEAR_IDLEF Idle line detection clear flag
|
|
* @arg @ref SMARTCARD_CLEAR_TCF Transmission complete clear flag
|
|
* @arg @ref SMARTCARD_CLEAR_RTOF Receiver timeout clear flag
|
|
* @arg @ref SMARTCARD_CLEAR_EOBF End of block clear flag
|
|
* @retval None
|
|
*/
|
|
#define __HAL_SMARTCARD_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__))
|
|
|
|
/** @brief Set a specific SMARTCARD request flag.
|
|
* @param __HANDLE__ specifies the SMARTCARD Handle.
|
|
* @param __REQ__ specifies the request flag to set
|
|
* This parameter can be one of the following values:
|
|
* @arg @ref SMARTCARD_RXDATA_FLUSH_REQUEST Receive data flush Request
|
|
* @arg @ref SMARTCARD_TXDATA_FLUSH_REQUEST Transmit data flush Request
|
|
*
|
|
* @retval None
|
|
*/
|
|
#define __HAL_SMARTCARD_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__))
|
|
|
|
/** @brief Enable the SMARTCARD one bit sample method.
|
|
* @param __HANDLE__ specifies the SMARTCARD Handle.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_SMARTCARD_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT)
|
|
|
|
/** @brief Disable the SMARTCARD one bit sample method.
|
|
* @param __HANDLE__ specifies the SMARTCARD Handle.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_SMARTCARD_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint32_t)~((uint32_t)USART_CR3_ONEBIT))
|
|
|
|
/** @brief Enable the USART associated to the SMARTCARD Handle.
|
|
* @param __HANDLE__ specifies the SMARTCARD Handle.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_SMARTCARD_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
|
|
|
|
/** @brief Disable the USART associated to the SMARTCARD Handle
|
|
* @param __HANDLE__ specifies the SMARTCARD Handle.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_SMARTCARD_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Private macros -------------------------------------------------------------*/
|
|
/** @defgroup SMARTCARD_Private_Macros SMARTCARD Private Macros
|
|
* @{
|
|
*/
|
|
|
|
/** @brief Check the Baud rate range.
|
|
* @note The maximum Baud Rate is derived from the maximum clock on F0 (48 MHz)
|
|
* divided by the oversampling used on the SMARTCARD (i.e. 16).
|
|
* @param __BAUDRATE__ Baud rate set by the configuration function.
|
|
* @retval Test result (TRUE or FALSE)
|
|
*/
|
|
#define IS_SMARTCARD_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 3000001U)
|
|
|
|
/** @brief Check the block length range.
|
|
* @note The maximum SMARTCARD block length is 0xFF.
|
|
* @param __LENGTH__ block length.
|
|
* @retval Test result (TRUE or FALSE)
|
|
*/
|
|
#define IS_SMARTCARD_BLOCKLENGTH(__LENGTH__) ((__LENGTH__) <= 0xFFU)
|
|
|
|
/** @brief Check the receiver timeout value.
|
|
* @note The maximum SMARTCARD receiver timeout value is 0xFFFFFF.
|
|
* @param __TIMEOUTVALUE__ receiver timeout value.
|
|
* @retval Test result (TRUE or FALSE)
|
|
*/
|
|
#define IS_SMARTCARD_TIMEOUT_VALUE(__TIMEOUTVALUE__) ((__TIMEOUTVALUE__) <= 0xFFFFFFU)
|
|
|
|
/** @brief Check the SMARTCARD autoretry counter value.
|
|
* @note The maximum number of retransmissions is 0x7.
|
|
* @param __COUNT__ number of retransmissions.
|
|
* @retval Test result (TRUE or FALSE)
|
|
*/
|
|
#define IS_SMARTCARD_AUTORETRY_COUNT(__COUNT__) ((__COUNT__) <= 0x7U)
|
|
|
|
/**
|
|
* @brief Ensure that SMARTCARD frame length is valid.
|
|
* @param __LENGTH__ SMARTCARD frame length.
|
|
* @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid)
|
|
*/
|
|
#define IS_SMARTCARD_WORD_LENGTH(__LENGTH__) ((__LENGTH__) == SMARTCARD_WORDLENGTH_9B)
|
|
|
|
/**
|
|
* @brief Ensure that SMARTCARD frame number of stop bits is valid.
|
|
* @param __STOPBITS__ SMARTCARD frame number of stop bits.
|
|
* @retval SET (__STOPBITS__ is valid) or RESET (__STOPBITS__ is invalid)
|
|
*/
|
|
#define IS_SMARTCARD_STOPBITS(__STOPBITS__) (((__STOPBITS__) == SMARTCARD_STOPBITS_0_5) ||\
|
|
((__STOPBITS__) == SMARTCARD_STOPBITS_1_5))
|
|
|
|
/**
|
|
* @brief Ensure that SMARTCARD frame parity is valid.
|
|
* @param __PARITY__ SMARTCARD frame parity.
|
|
* @retval SET (__PARITY__ is valid) or RESET (__PARITY__ is invalid)
|
|
*/
|
|
#define IS_SMARTCARD_PARITY(__PARITY__) (((__PARITY__) == SMARTCARD_PARITY_EVEN) || \
|
|
((__PARITY__) == SMARTCARD_PARITY_ODD))
|
|
|
|
/**
|
|
* @brief Ensure that SMARTCARD communication mode is valid.
|
|
* @param __MODE__ SMARTCARD communication mode.
|
|
* @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid)
|
|
*/
|
|
#define IS_SMARTCARD_MODE(__MODE__) ((((__MODE__) & (uint16_t)0xFFF3U) == 0x00U) && ((__MODE__) != (uint16_t)0x00U))
|
|
|
|
/**
|
|
* @brief Ensure that SMARTCARD frame polarity is valid.
|
|
* @param __CPOL__ SMARTCARD frame polarity.
|
|
* @retval SET (__CPOL__ is valid) or RESET (__CPOL__ is invalid)
|
|
*/
|
|
#define IS_SMARTCARD_POLARITY(__CPOL__) (((__CPOL__) == SMARTCARD_POLARITY_LOW) || ((__CPOL__) == SMARTCARD_POLARITY_HIGH))
|
|
|
|
/**
|
|
* @brief Ensure that SMARTCARD frame phase is valid.
|
|
* @param __CPHA__ SMARTCARD frame phase.
|
|
* @retval SET (__CPHA__ is valid) or RESET (__CPHA__ is invalid)
|
|
*/
|
|
#define IS_SMARTCARD_PHASE(__CPHA__) (((__CPHA__) == SMARTCARD_PHASE_1EDGE) || ((__CPHA__) == SMARTCARD_PHASE_2EDGE))
|
|
|
|
/**
|
|
* @brief Ensure that SMARTCARD frame last bit clock pulse setting is valid.
|
|
* @param __LASTBIT__ SMARTCARD frame last bit clock pulse setting.
|
|
* @retval SET (__LASTBIT__ is valid) or RESET (__LASTBIT__ is invalid)
|
|
*/
|
|
#define IS_SMARTCARD_LASTBIT(__LASTBIT__) (((__LASTBIT__) == SMARTCARD_LASTBIT_DISABLE) || \
|
|
((__LASTBIT__) == SMARTCARD_LASTBIT_ENABLE))
|
|
|
|
/**
|
|
* @brief Ensure that SMARTCARD frame sampling is valid.
|
|
* @param __ONEBIT__ SMARTCARD frame sampling.
|
|
* @retval SET (__ONEBIT__ is valid) or RESET (__ONEBIT__ is invalid)
|
|
*/
|
|
#define IS_SMARTCARD_ONE_BIT_SAMPLE(__ONEBIT__) (((__ONEBIT__) == SMARTCARD_ONE_BIT_SAMPLE_DISABLE) || \
|
|
((__ONEBIT__) == SMARTCARD_ONE_BIT_SAMPLE_ENABLE))
|
|
|
|
/**
|
|
* @brief Ensure that SMARTCARD NACK transmission setting is valid.
|
|
* @param __NACK__ SMARTCARD NACK transmission setting.
|
|
* @retval SET (__NACK__ is valid) or RESET (__NACK__ is invalid)
|
|
*/
|
|
#define IS_SMARTCARD_NACK(__NACK__) (((__NACK__) == SMARTCARD_NACK_ENABLE) || \
|
|
((__NACK__) == SMARTCARD_NACK_DISABLE))
|
|
|
|
/**
|
|
* @brief Ensure that SMARTCARD receiver timeout setting is valid.
|
|
* @param __TIMEOUT__ SMARTCARD receiver timeout setting.
|
|
* @retval SET (__TIMEOUT__ is valid) or RESET (__TIMEOUT__ is invalid)
|
|
*/
|
|
#define IS_SMARTCARD_TIMEOUT(__TIMEOUT__) (((__TIMEOUT__) == SMARTCARD_TIMEOUT_DISABLE) || \
|
|
((__TIMEOUT__) == SMARTCARD_TIMEOUT_ENABLE))
|
|
|
|
/**
|
|
* @brief Ensure that SMARTCARD advanced features initialization is valid.
|
|
* @param __INIT__ SMARTCARD advanced features initialization.
|
|
* @retval SET (__INIT__ is valid) or RESET (__INIT__ is invalid)
|
|
*/
|
|
#define IS_SMARTCARD_ADVFEATURE_INIT(__INIT__) ((__INIT__) <= (SMARTCARD_ADVFEATURE_NO_INIT | \
|
|
SMARTCARD_ADVFEATURE_TXINVERT_INIT | \
|
|
SMARTCARD_ADVFEATURE_RXINVERT_INIT | \
|
|
SMARTCARD_ADVFEATURE_DATAINVERT_INIT | \
|
|
SMARTCARD_ADVFEATURE_SWAP_INIT | \
|
|
SMARTCARD_ADVFEATURE_RXOVERRUNDISABLE_INIT | \
|
|
SMARTCARD_ADVFEATURE_DMADISABLEONERROR_INIT | \
|
|
SMARTCARD_ADVFEATURE_MSBFIRST_INIT))
|
|
|
|
/**
|
|
* @brief Ensure that SMARTCARD frame TX inversion setting is valid.
|
|
* @param __TXINV__ SMARTCARD frame TX inversion setting.
|
|
* @retval SET (__TXINV__ is valid) or RESET (__TXINV__ is invalid)
|
|
*/
|
|
#define IS_SMARTCARD_ADVFEATURE_TXINV(__TXINV__) (((__TXINV__) == SMARTCARD_ADVFEATURE_TXINV_DISABLE) || \
|
|
((__TXINV__) == SMARTCARD_ADVFEATURE_TXINV_ENABLE))
|
|
|
|
/**
|
|
* @brief Ensure that SMARTCARD frame RX inversion setting is valid.
|
|
* @param __RXINV__ SMARTCARD frame RX inversion setting.
|
|
* @retval SET (__RXINV__ is valid) or RESET (__RXINV__ is invalid)
|
|
*/
|
|
#define IS_SMARTCARD_ADVFEATURE_RXINV(__RXINV__) (((__RXINV__) == SMARTCARD_ADVFEATURE_RXINV_DISABLE) || \
|
|
((__RXINV__) == SMARTCARD_ADVFEATURE_RXINV_ENABLE))
|
|
|
|
/**
|
|
* @brief Ensure that SMARTCARD frame data inversion setting is valid.
|
|
* @param __DATAINV__ SMARTCARD frame data inversion setting.
|
|
* @retval SET (__DATAINV__ is valid) or RESET (__DATAINV__ is invalid)
|
|
*/
|
|
#define IS_SMARTCARD_ADVFEATURE_DATAINV(__DATAINV__) (((__DATAINV__) == SMARTCARD_ADVFEATURE_DATAINV_DISABLE) || \
|
|
((__DATAINV__) == SMARTCARD_ADVFEATURE_DATAINV_ENABLE))
|
|
|
|
/**
|
|
* @brief Ensure that SMARTCARD frame RX/TX pins swap setting is valid.
|
|
* @param __SWAP__ SMARTCARD frame RX/TX pins swap setting.
|
|
* @retval SET (__SWAP__ is valid) or RESET (__SWAP__ is invalid)
|
|
*/
|
|
#define IS_SMARTCARD_ADVFEATURE_SWAP(__SWAP__) (((__SWAP__) == SMARTCARD_ADVFEATURE_SWAP_DISABLE) || \
|
|
((__SWAP__) == SMARTCARD_ADVFEATURE_SWAP_ENABLE))
|
|
|
|
/**
|
|
* @brief Ensure that SMARTCARD frame overrun setting is valid.
|
|
* @param __OVERRUN__ SMARTCARD frame overrun setting.
|
|
* @retval SET (__OVERRUN__ is valid) or RESET (__OVERRUN__ is invalid)
|
|
*/
|
|
#define IS_SMARTCARD_OVERRUN(__OVERRUN__) (((__OVERRUN__) == SMARTCARD_ADVFEATURE_OVERRUN_ENABLE) || \
|
|
((__OVERRUN__) == SMARTCARD_ADVFEATURE_OVERRUN_DISABLE))
|
|
|
|
/**
|
|
* @brief Ensure that SMARTCARD DMA enabling or disabling on error setting is valid.
|
|
* @param __DMA__ SMARTCARD DMA enabling or disabling on error setting.
|
|
* @retval SET (__DMA__ is valid) or RESET (__DMA__ is invalid)
|
|
*/
|
|
#define IS_SMARTCARD_ADVFEATURE_DMAONRXERROR(__DMA__) (((__DMA__) == SMARTCARD_ADVFEATURE_DMA_ENABLEONRXERROR) || \
|
|
((__DMA__) == SMARTCARD_ADVFEATURE_DMA_DISABLEONRXERROR))
|
|
|
|
/**
|
|
* @brief Ensure that SMARTCARD frame MSB first setting is valid.
|
|
* @param __MSBFIRST__ SMARTCARD frame MSB first setting.
|
|
* @retval SET (__MSBFIRST__ is valid) or RESET (__MSBFIRST__ is invalid)
|
|
*/
|
|
#define IS_SMARTCARD_ADVFEATURE_MSBFIRST(__MSBFIRST__) (((__MSBFIRST__) == SMARTCARD_ADVFEATURE_MSBFIRST_DISABLE) || \
|
|
((__MSBFIRST__) == SMARTCARD_ADVFEATURE_MSBFIRST_ENABLE))
|
|
|
|
/**
|
|
* @brief Ensure that SMARTCARD request parameter is valid.
|
|
* @param __PARAM__ SMARTCARD request parameter.
|
|
* @retval SET (__PARAM__ is valid) or RESET (__PARAM__ is invalid)
|
|
*/
|
|
#define IS_SMARTCARD_REQUEST_PARAMETER(__PARAM__) (((__PARAM__) == SMARTCARD_RXDATA_FLUSH_REQUEST) || \
|
|
((__PARAM__) == SMARTCARD_TXDATA_FLUSH_REQUEST))
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Include SMARTCARD HAL Extended module */
|
|
#include "stm32f0xx_hal_smartcard_ex.h"
|
|
|
|
/* Exported functions --------------------------------------------------------*/
|
|
/** @addtogroup SMARTCARD_Exported_Functions
|
|
* @{
|
|
*/
|
|
|
|
/* Initialization and de-initialization functions ****************************/
|
|
|
|
/** @addtogroup SMARTCARD_Exported_Functions_Group1
|
|
* @{
|
|
*/
|
|
|
|
HAL_StatusTypeDef HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef *hsmartcard);
|
|
HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsmartcard);
|
|
void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsmartcard);
|
|
void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsmartcard);
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* IO operation functions *****************************************************/
|
|
/** @addtogroup SMARTCARD_Exported_Functions_Group2
|
|
* @{
|
|
*/
|
|
|
|
HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size, uint32_t Timeout);
|
|
HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size, uint32_t Timeout);
|
|
HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size);
|
|
HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size);
|
|
HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size);
|
|
HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size);
|
|
/* Transfer Abort functions */
|
|
HAL_StatusTypeDef HAL_SMARTCARD_Abort(SMARTCARD_HandleTypeDef *hsmartcard);
|
|
HAL_StatusTypeDef HAL_SMARTCARD_AbortTransmit(SMARTCARD_HandleTypeDef *hsmartcard);
|
|
HAL_StatusTypeDef HAL_SMARTCARD_AbortReceive(SMARTCARD_HandleTypeDef *hsmartcard);
|
|
HAL_StatusTypeDef HAL_SMARTCARD_Abort_IT(SMARTCARD_HandleTypeDef *hsmartcard);
|
|
HAL_StatusTypeDef HAL_SMARTCARD_AbortTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard);
|
|
HAL_StatusTypeDef HAL_SMARTCARD_AbortReceive_IT(SMARTCARD_HandleTypeDef *hsmartcard);
|
|
|
|
void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsmartcard);
|
|
void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard);
|
|
void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard);
|
|
void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsmartcard);
|
|
void HAL_SMARTCARD_AbortCpltCallback (SMARTCARD_HandleTypeDef *hsmartcard);
|
|
void HAL_SMARTCARD_AbortTransmitCpltCallback (SMARTCARD_HandleTypeDef *hsmartcard);
|
|
void HAL_SMARTCARD_AbortReceiveCpltCallback (SMARTCARD_HandleTypeDef *hsmartcard);
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Peripheral State and Error functions ***************************************/
|
|
/** @addtogroup SMARTCARD_Exported_Functions_Group3
|
|
* @{
|
|
*/
|
|
|
|
HAL_SMARTCARD_StateTypeDef HAL_SMARTCARD_GetState(SMARTCARD_HandleTypeDef *hsmartcard);
|
|
uint32_t HAL_SMARTCARD_GetError(SMARTCARD_HandleTypeDef *hsmartcard);
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* __STM32F0xx_HAL_SMARTCARD_H */
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
|