mirror of https://github.com/Desuuuu/klipper.git
258 lines
13 KiB
C
258 lines
13 KiB
C
/**
|
|
* Copyright (c) 2021 Raspberry Pi (Trading) Ltd.
|
|
*
|
|
* SPDX-License-Identifier: BSD-3-Clause
|
|
*/
|
|
// =============================================================================
|
|
// Register block : SYSCFG
|
|
// Version : 1
|
|
// Bus type : apb
|
|
// Description : Register block for various chip control signals
|
|
// =============================================================================
|
|
#ifndef HARDWARE_REGS_SYSCFG_DEFINED
|
|
#define HARDWARE_REGS_SYSCFG_DEFINED
|
|
// =============================================================================
|
|
// Register : SYSCFG_PROC0_NMI_MASK
|
|
// Description : Processor core 0 NMI source mask
|
|
// Set a bit high to enable NMI from that IRQ
|
|
#define SYSCFG_PROC0_NMI_MASK_OFFSET _u(0x00000000)
|
|
#define SYSCFG_PROC0_NMI_MASK_BITS _u(0xffffffff)
|
|
#define SYSCFG_PROC0_NMI_MASK_RESET _u(0x00000000)
|
|
#define SYSCFG_PROC0_NMI_MASK_MSB _u(31)
|
|
#define SYSCFG_PROC0_NMI_MASK_LSB _u(0)
|
|
#define SYSCFG_PROC0_NMI_MASK_ACCESS "RW"
|
|
// =============================================================================
|
|
// Register : SYSCFG_PROC1_NMI_MASK
|
|
// Description : Processor core 1 NMI source mask
|
|
// Set a bit high to enable NMI from that IRQ
|
|
#define SYSCFG_PROC1_NMI_MASK_OFFSET _u(0x00000004)
|
|
#define SYSCFG_PROC1_NMI_MASK_BITS _u(0xffffffff)
|
|
#define SYSCFG_PROC1_NMI_MASK_RESET _u(0x00000000)
|
|
#define SYSCFG_PROC1_NMI_MASK_MSB _u(31)
|
|
#define SYSCFG_PROC1_NMI_MASK_LSB _u(0)
|
|
#define SYSCFG_PROC1_NMI_MASK_ACCESS "RW"
|
|
// =============================================================================
|
|
// Register : SYSCFG_PROC_CONFIG
|
|
// Description : Configuration for processors
|
|
#define SYSCFG_PROC_CONFIG_OFFSET _u(0x00000008)
|
|
#define SYSCFG_PROC_CONFIG_BITS _u(0xff000003)
|
|
#define SYSCFG_PROC_CONFIG_RESET _u(0x10000000)
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SYSCFG_PROC_CONFIG_PROC1_DAP_INSTID
|
|
// Description : Configure proc1 DAP instance ID.
|
|
// Recommend that this is NOT changed until you require debug
|
|
// access in multi-chip environment
|
|
// WARNING: do not set to 15 as this is reserved for RescueDP
|
|
#define SYSCFG_PROC_CONFIG_PROC1_DAP_INSTID_RESET _u(0x1)
|
|
#define SYSCFG_PROC_CONFIG_PROC1_DAP_INSTID_BITS _u(0xf0000000)
|
|
#define SYSCFG_PROC_CONFIG_PROC1_DAP_INSTID_MSB _u(31)
|
|
#define SYSCFG_PROC_CONFIG_PROC1_DAP_INSTID_LSB _u(28)
|
|
#define SYSCFG_PROC_CONFIG_PROC1_DAP_INSTID_ACCESS "RW"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SYSCFG_PROC_CONFIG_PROC0_DAP_INSTID
|
|
// Description : Configure proc0 DAP instance ID.
|
|
// Recommend that this is NOT changed until you require debug
|
|
// access in multi-chip environment
|
|
// WARNING: do not set to 15 as this is reserved for RescueDP
|
|
#define SYSCFG_PROC_CONFIG_PROC0_DAP_INSTID_RESET _u(0x0)
|
|
#define SYSCFG_PROC_CONFIG_PROC0_DAP_INSTID_BITS _u(0x0f000000)
|
|
#define SYSCFG_PROC_CONFIG_PROC0_DAP_INSTID_MSB _u(27)
|
|
#define SYSCFG_PROC_CONFIG_PROC0_DAP_INSTID_LSB _u(24)
|
|
#define SYSCFG_PROC_CONFIG_PROC0_DAP_INSTID_ACCESS "RW"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SYSCFG_PROC_CONFIG_PROC1_HALTED
|
|
// Description : Indication that proc1 has halted
|
|
#define SYSCFG_PROC_CONFIG_PROC1_HALTED_RESET _u(0x0)
|
|
#define SYSCFG_PROC_CONFIG_PROC1_HALTED_BITS _u(0x00000002)
|
|
#define SYSCFG_PROC_CONFIG_PROC1_HALTED_MSB _u(1)
|
|
#define SYSCFG_PROC_CONFIG_PROC1_HALTED_LSB _u(1)
|
|
#define SYSCFG_PROC_CONFIG_PROC1_HALTED_ACCESS "RO"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SYSCFG_PROC_CONFIG_PROC0_HALTED
|
|
// Description : Indication that proc0 has halted
|
|
#define SYSCFG_PROC_CONFIG_PROC0_HALTED_RESET _u(0x0)
|
|
#define SYSCFG_PROC_CONFIG_PROC0_HALTED_BITS _u(0x00000001)
|
|
#define SYSCFG_PROC_CONFIG_PROC0_HALTED_MSB _u(0)
|
|
#define SYSCFG_PROC_CONFIG_PROC0_HALTED_LSB _u(0)
|
|
#define SYSCFG_PROC_CONFIG_PROC0_HALTED_ACCESS "RO"
|
|
// =============================================================================
|
|
// Register : SYSCFG_PROC_IN_SYNC_BYPASS
|
|
// Description : For each bit, if 1, bypass the input synchronizer between that
|
|
// GPIO
|
|
// and the GPIO input register in the SIO. The input synchronizers
|
|
// should
|
|
// generally be unbypassed, to avoid injecting metastabilities
|
|
// into processors.
|
|
// If you're feeling brave, you can bypass to save two cycles of
|
|
// input
|
|
// latency. This register applies to GPIO 0...29.
|
|
#define SYSCFG_PROC_IN_SYNC_BYPASS_OFFSET _u(0x0000000c)
|
|
#define SYSCFG_PROC_IN_SYNC_BYPASS_BITS _u(0x3fffffff)
|
|
#define SYSCFG_PROC_IN_SYNC_BYPASS_RESET _u(0x00000000)
|
|
#define SYSCFG_PROC_IN_SYNC_BYPASS_MSB _u(29)
|
|
#define SYSCFG_PROC_IN_SYNC_BYPASS_LSB _u(0)
|
|
#define SYSCFG_PROC_IN_SYNC_BYPASS_ACCESS "RW"
|
|
// =============================================================================
|
|
// Register : SYSCFG_PROC_IN_SYNC_BYPASS_HI
|
|
// Description : For each bit, if 1, bypass the input synchronizer between that
|
|
// GPIO
|
|
// and the GPIO input register in the SIO. The input synchronizers
|
|
// should
|
|
// generally be unbypassed, to avoid injecting metastabilities
|
|
// into processors.
|
|
// If you're feeling brave, you can bypass to save two cycles of
|
|
// input
|
|
// latency. This register applies to GPIO 30...35 (the QSPI IOs).
|
|
#define SYSCFG_PROC_IN_SYNC_BYPASS_HI_OFFSET _u(0x00000010)
|
|
#define SYSCFG_PROC_IN_SYNC_BYPASS_HI_BITS _u(0x0000003f)
|
|
#define SYSCFG_PROC_IN_SYNC_BYPASS_HI_RESET _u(0x00000000)
|
|
#define SYSCFG_PROC_IN_SYNC_BYPASS_HI_MSB _u(5)
|
|
#define SYSCFG_PROC_IN_SYNC_BYPASS_HI_LSB _u(0)
|
|
#define SYSCFG_PROC_IN_SYNC_BYPASS_HI_ACCESS "RW"
|
|
// =============================================================================
|
|
// Register : SYSCFG_DBGFORCE
|
|
// Description : Directly control the SWD debug port of either processor
|
|
#define SYSCFG_DBGFORCE_OFFSET _u(0x00000014)
|
|
#define SYSCFG_DBGFORCE_BITS _u(0x000000ff)
|
|
#define SYSCFG_DBGFORCE_RESET _u(0x00000066)
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SYSCFG_DBGFORCE_PROC1_ATTACH
|
|
// Description : Attach processor 1 debug port to syscfg controls, and
|
|
// disconnect it from external SWD pads.
|
|
#define SYSCFG_DBGFORCE_PROC1_ATTACH_RESET _u(0x0)
|
|
#define SYSCFG_DBGFORCE_PROC1_ATTACH_BITS _u(0x00000080)
|
|
#define SYSCFG_DBGFORCE_PROC1_ATTACH_MSB _u(7)
|
|
#define SYSCFG_DBGFORCE_PROC1_ATTACH_LSB _u(7)
|
|
#define SYSCFG_DBGFORCE_PROC1_ATTACH_ACCESS "RW"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SYSCFG_DBGFORCE_PROC1_SWCLK
|
|
// Description : Directly drive processor 1 SWCLK, if PROC1_ATTACH is set
|
|
#define SYSCFG_DBGFORCE_PROC1_SWCLK_RESET _u(0x1)
|
|
#define SYSCFG_DBGFORCE_PROC1_SWCLK_BITS _u(0x00000040)
|
|
#define SYSCFG_DBGFORCE_PROC1_SWCLK_MSB _u(6)
|
|
#define SYSCFG_DBGFORCE_PROC1_SWCLK_LSB _u(6)
|
|
#define SYSCFG_DBGFORCE_PROC1_SWCLK_ACCESS "RW"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SYSCFG_DBGFORCE_PROC1_SWDI
|
|
// Description : Directly drive processor 1 SWDIO input, if PROC1_ATTACH is set
|
|
#define SYSCFG_DBGFORCE_PROC1_SWDI_RESET _u(0x1)
|
|
#define SYSCFG_DBGFORCE_PROC1_SWDI_BITS _u(0x00000020)
|
|
#define SYSCFG_DBGFORCE_PROC1_SWDI_MSB _u(5)
|
|
#define SYSCFG_DBGFORCE_PROC1_SWDI_LSB _u(5)
|
|
#define SYSCFG_DBGFORCE_PROC1_SWDI_ACCESS "RW"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SYSCFG_DBGFORCE_PROC1_SWDO
|
|
// Description : Observe the value of processor 1 SWDIO output.
|
|
#define SYSCFG_DBGFORCE_PROC1_SWDO_RESET "-"
|
|
#define SYSCFG_DBGFORCE_PROC1_SWDO_BITS _u(0x00000010)
|
|
#define SYSCFG_DBGFORCE_PROC1_SWDO_MSB _u(4)
|
|
#define SYSCFG_DBGFORCE_PROC1_SWDO_LSB _u(4)
|
|
#define SYSCFG_DBGFORCE_PROC1_SWDO_ACCESS "RO"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SYSCFG_DBGFORCE_PROC0_ATTACH
|
|
// Description : Attach processor 0 debug port to syscfg controls, and
|
|
// disconnect it from external SWD pads.
|
|
#define SYSCFG_DBGFORCE_PROC0_ATTACH_RESET _u(0x0)
|
|
#define SYSCFG_DBGFORCE_PROC0_ATTACH_BITS _u(0x00000008)
|
|
#define SYSCFG_DBGFORCE_PROC0_ATTACH_MSB _u(3)
|
|
#define SYSCFG_DBGFORCE_PROC0_ATTACH_LSB _u(3)
|
|
#define SYSCFG_DBGFORCE_PROC0_ATTACH_ACCESS "RW"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SYSCFG_DBGFORCE_PROC0_SWCLK
|
|
// Description : Directly drive processor 0 SWCLK, if PROC0_ATTACH is set
|
|
#define SYSCFG_DBGFORCE_PROC0_SWCLK_RESET _u(0x1)
|
|
#define SYSCFG_DBGFORCE_PROC0_SWCLK_BITS _u(0x00000004)
|
|
#define SYSCFG_DBGFORCE_PROC0_SWCLK_MSB _u(2)
|
|
#define SYSCFG_DBGFORCE_PROC0_SWCLK_LSB _u(2)
|
|
#define SYSCFG_DBGFORCE_PROC0_SWCLK_ACCESS "RW"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SYSCFG_DBGFORCE_PROC0_SWDI
|
|
// Description : Directly drive processor 0 SWDIO input, if PROC0_ATTACH is set
|
|
#define SYSCFG_DBGFORCE_PROC0_SWDI_RESET _u(0x1)
|
|
#define SYSCFG_DBGFORCE_PROC0_SWDI_BITS _u(0x00000002)
|
|
#define SYSCFG_DBGFORCE_PROC0_SWDI_MSB _u(1)
|
|
#define SYSCFG_DBGFORCE_PROC0_SWDI_LSB _u(1)
|
|
#define SYSCFG_DBGFORCE_PROC0_SWDI_ACCESS "RW"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SYSCFG_DBGFORCE_PROC0_SWDO
|
|
// Description : Observe the value of processor 0 SWDIO output.
|
|
#define SYSCFG_DBGFORCE_PROC0_SWDO_RESET "-"
|
|
#define SYSCFG_DBGFORCE_PROC0_SWDO_BITS _u(0x00000001)
|
|
#define SYSCFG_DBGFORCE_PROC0_SWDO_MSB _u(0)
|
|
#define SYSCFG_DBGFORCE_PROC0_SWDO_LSB _u(0)
|
|
#define SYSCFG_DBGFORCE_PROC0_SWDO_ACCESS "RO"
|
|
// =============================================================================
|
|
// Register : SYSCFG_MEMPOWERDOWN
|
|
// Description : Control power downs to memories. Set high to power down
|
|
// memories.
|
|
// Use with extreme caution
|
|
#define SYSCFG_MEMPOWERDOWN_OFFSET _u(0x00000018)
|
|
#define SYSCFG_MEMPOWERDOWN_BITS _u(0x000000ff)
|
|
#define SYSCFG_MEMPOWERDOWN_RESET _u(0x00000000)
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SYSCFG_MEMPOWERDOWN_ROM
|
|
// Description : None
|
|
#define SYSCFG_MEMPOWERDOWN_ROM_RESET _u(0x0)
|
|
#define SYSCFG_MEMPOWERDOWN_ROM_BITS _u(0x00000080)
|
|
#define SYSCFG_MEMPOWERDOWN_ROM_MSB _u(7)
|
|
#define SYSCFG_MEMPOWERDOWN_ROM_LSB _u(7)
|
|
#define SYSCFG_MEMPOWERDOWN_ROM_ACCESS "RW"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SYSCFG_MEMPOWERDOWN_USB
|
|
// Description : None
|
|
#define SYSCFG_MEMPOWERDOWN_USB_RESET _u(0x0)
|
|
#define SYSCFG_MEMPOWERDOWN_USB_BITS _u(0x00000040)
|
|
#define SYSCFG_MEMPOWERDOWN_USB_MSB _u(6)
|
|
#define SYSCFG_MEMPOWERDOWN_USB_LSB _u(6)
|
|
#define SYSCFG_MEMPOWERDOWN_USB_ACCESS "RW"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SYSCFG_MEMPOWERDOWN_SRAM5
|
|
// Description : None
|
|
#define SYSCFG_MEMPOWERDOWN_SRAM5_RESET _u(0x0)
|
|
#define SYSCFG_MEMPOWERDOWN_SRAM5_BITS _u(0x00000020)
|
|
#define SYSCFG_MEMPOWERDOWN_SRAM5_MSB _u(5)
|
|
#define SYSCFG_MEMPOWERDOWN_SRAM5_LSB _u(5)
|
|
#define SYSCFG_MEMPOWERDOWN_SRAM5_ACCESS "RW"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SYSCFG_MEMPOWERDOWN_SRAM4
|
|
// Description : None
|
|
#define SYSCFG_MEMPOWERDOWN_SRAM4_RESET _u(0x0)
|
|
#define SYSCFG_MEMPOWERDOWN_SRAM4_BITS _u(0x00000010)
|
|
#define SYSCFG_MEMPOWERDOWN_SRAM4_MSB _u(4)
|
|
#define SYSCFG_MEMPOWERDOWN_SRAM4_LSB _u(4)
|
|
#define SYSCFG_MEMPOWERDOWN_SRAM4_ACCESS "RW"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SYSCFG_MEMPOWERDOWN_SRAM3
|
|
// Description : None
|
|
#define SYSCFG_MEMPOWERDOWN_SRAM3_RESET _u(0x0)
|
|
#define SYSCFG_MEMPOWERDOWN_SRAM3_BITS _u(0x00000008)
|
|
#define SYSCFG_MEMPOWERDOWN_SRAM3_MSB _u(3)
|
|
#define SYSCFG_MEMPOWERDOWN_SRAM3_LSB _u(3)
|
|
#define SYSCFG_MEMPOWERDOWN_SRAM3_ACCESS "RW"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SYSCFG_MEMPOWERDOWN_SRAM2
|
|
// Description : None
|
|
#define SYSCFG_MEMPOWERDOWN_SRAM2_RESET _u(0x0)
|
|
#define SYSCFG_MEMPOWERDOWN_SRAM2_BITS _u(0x00000004)
|
|
#define SYSCFG_MEMPOWERDOWN_SRAM2_MSB _u(2)
|
|
#define SYSCFG_MEMPOWERDOWN_SRAM2_LSB _u(2)
|
|
#define SYSCFG_MEMPOWERDOWN_SRAM2_ACCESS "RW"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SYSCFG_MEMPOWERDOWN_SRAM1
|
|
// Description : None
|
|
#define SYSCFG_MEMPOWERDOWN_SRAM1_RESET _u(0x0)
|
|
#define SYSCFG_MEMPOWERDOWN_SRAM1_BITS _u(0x00000002)
|
|
#define SYSCFG_MEMPOWERDOWN_SRAM1_MSB _u(1)
|
|
#define SYSCFG_MEMPOWERDOWN_SRAM1_LSB _u(1)
|
|
#define SYSCFG_MEMPOWERDOWN_SRAM1_ACCESS "RW"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : SYSCFG_MEMPOWERDOWN_SRAM0
|
|
// Description : None
|
|
#define SYSCFG_MEMPOWERDOWN_SRAM0_RESET _u(0x0)
|
|
#define SYSCFG_MEMPOWERDOWN_SRAM0_BITS _u(0x00000001)
|
|
#define SYSCFG_MEMPOWERDOWN_SRAM0_MSB _u(0)
|
|
#define SYSCFG_MEMPOWERDOWN_SRAM0_LSB _u(0)
|
|
#define SYSCFG_MEMPOWERDOWN_SRAM0_ACCESS "RW"
|
|
// =============================================================================
|
|
#endif // HARDWARE_REGS_SYSCFG_DEFINED
|