mirror of https://github.com/Desuuuu/klipper.git
455 lines
23 KiB
C
455 lines
23 KiB
C
/**
|
|
* Copyright (c) 2021 Raspberry Pi (Trading) Ltd.
|
|
*
|
|
* SPDX-License-Identifier: BSD-3-Clause
|
|
*/
|
|
// =============================================================================
|
|
// Register block : PADS_QSPI
|
|
// Version : 1
|
|
// Bus type : apb
|
|
// Description : None
|
|
// =============================================================================
|
|
#ifndef HARDWARE_REGS_PADS_QSPI_DEFINED
|
|
#define HARDWARE_REGS_PADS_QSPI_DEFINED
|
|
// =============================================================================
|
|
// Register : PADS_QSPI_VOLTAGE_SELECT
|
|
// Description : Voltage select. Per bank control
|
|
// 0x0 -> Set voltage to 3.3V (DVDD >= 2V5)
|
|
// 0x1 -> Set voltage to 1.8V (DVDD <= 1V8)
|
|
#define PADS_QSPI_VOLTAGE_SELECT_OFFSET _u(0x00000000)
|
|
#define PADS_QSPI_VOLTAGE_SELECT_BITS _u(0x00000001)
|
|
#define PADS_QSPI_VOLTAGE_SELECT_RESET _u(0x00000000)
|
|
#define PADS_QSPI_VOLTAGE_SELECT_MSB _u(0)
|
|
#define PADS_QSPI_VOLTAGE_SELECT_LSB _u(0)
|
|
#define PADS_QSPI_VOLTAGE_SELECT_ACCESS "RW"
|
|
#define PADS_QSPI_VOLTAGE_SELECT_VALUE_3V3 _u(0x0)
|
|
#define PADS_QSPI_VOLTAGE_SELECT_VALUE_1V8 _u(0x1)
|
|
// =============================================================================
|
|
// Register : PADS_QSPI_GPIO_QSPI_SCLK
|
|
// Description : Pad control register
|
|
#define PADS_QSPI_GPIO_QSPI_SCLK_OFFSET _u(0x00000004)
|
|
#define PADS_QSPI_GPIO_QSPI_SCLK_BITS _u(0x000000ff)
|
|
#define PADS_QSPI_GPIO_QSPI_SCLK_RESET _u(0x00000056)
|
|
// -----------------------------------------------------------------------------
|
|
// Field : PADS_QSPI_GPIO_QSPI_SCLK_OD
|
|
// Description : Output disable. Has priority over output enable from
|
|
// peripherals
|
|
#define PADS_QSPI_GPIO_QSPI_SCLK_OD_RESET _u(0x0)
|
|
#define PADS_QSPI_GPIO_QSPI_SCLK_OD_BITS _u(0x00000080)
|
|
#define PADS_QSPI_GPIO_QSPI_SCLK_OD_MSB _u(7)
|
|
#define PADS_QSPI_GPIO_QSPI_SCLK_OD_LSB _u(7)
|
|
#define PADS_QSPI_GPIO_QSPI_SCLK_OD_ACCESS "RW"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : PADS_QSPI_GPIO_QSPI_SCLK_IE
|
|
// Description : Input enable
|
|
#define PADS_QSPI_GPIO_QSPI_SCLK_IE_RESET _u(0x1)
|
|
#define PADS_QSPI_GPIO_QSPI_SCLK_IE_BITS _u(0x00000040)
|
|
#define PADS_QSPI_GPIO_QSPI_SCLK_IE_MSB _u(6)
|
|
#define PADS_QSPI_GPIO_QSPI_SCLK_IE_LSB _u(6)
|
|
#define PADS_QSPI_GPIO_QSPI_SCLK_IE_ACCESS "RW"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : PADS_QSPI_GPIO_QSPI_SCLK_DRIVE
|
|
// Description : Drive strength.
|
|
// 0x0 -> 2mA
|
|
// 0x1 -> 4mA
|
|
// 0x2 -> 8mA
|
|
// 0x3 -> 12mA
|
|
#define PADS_QSPI_GPIO_QSPI_SCLK_DRIVE_RESET _u(0x1)
|
|
#define PADS_QSPI_GPIO_QSPI_SCLK_DRIVE_BITS _u(0x00000030)
|
|
#define PADS_QSPI_GPIO_QSPI_SCLK_DRIVE_MSB _u(5)
|
|
#define PADS_QSPI_GPIO_QSPI_SCLK_DRIVE_LSB _u(4)
|
|
#define PADS_QSPI_GPIO_QSPI_SCLK_DRIVE_ACCESS "RW"
|
|
#define PADS_QSPI_GPIO_QSPI_SCLK_DRIVE_VALUE_2MA _u(0x0)
|
|
#define PADS_QSPI_GPIO_QSPI_SCLK_DRIVE_VALUE_4MA _u(0x1)
|
|
#define PADS_QSPI_GPIO_QSPI_SCLK_DRIVE_VALUE_8MA _u(0x2)
|
|
#define PADS_QSPI_GPIO_QSPI_SCLK_DRIVE_VALUE_12MA _u(0x3)
|
|
// -----------------------------------------------------------------------------
|
|
// Field : PADS_QSPI_GPIO_QSPI_SCLK_PUE
|
|
// Description : Pull up enable
|
|
#define PADS_QSPI_GPIO_QSPI_SCLK_PUE_RESET _u(0x0)
|
|
#define PADS_QSPI_GPIO_QSPI_SCLK_PUE_BITS _u(0x00000008)
|
|
#define PADS_QSPI_GPIO_QSPI_SCLK_PUE_MSB _u(3)
|
|
#define PADS_QSPI_GPIO_QSPI_SCLK_PUE_LSB _u(3)
|
|
#define PADS_QSPI_GPIO_QSPI_SCLK_PUE_ACCESS "RW"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : PADS_QSPI_GPIO_QSPI_SCLK_PDE
|
|
// Description : Pull down enable
|
|
#define PADS_QSPI_GPIO_QSPI_SCLK_PDE_RESET _u(0x1)
|
|
#define PADS_QSPI_GPIO_QSPI_SCLK_PDE_BITS _u(0x00000004)
|
|
#define PADS_QSPI_GPIO_QSPI_SCLK_PDE_MSB _u(2)
|
|
#define PADS_QSPI_GPIO_QSPI_SCLK_PDE_LSB _u(2)
|
|
#define PADS_QSPI_GPIO_QSPI_SCLK_PDE_ACCESS "RW"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : PADS_QSPI_GPIO_QSPI_SCLK_SCHMITT
|
|
// Description : Enable schmitt trigger
|
|
#define PADS_QSPI_GPIO_QSPI_SCLK_SCHMITT_RESET _u(0x1)
|
|
#define PADS_QSPI_GPIO_QSPI_SCLK_SCHMITT_BITS _u(0x00000002)
|
|
#define PADS_QSPI_GPIO_QSPI_SCLK_SCHMITT_MSB _u(1)
|
|
#define PADS_QSPI_GPIO_QSPI_SCLK_SCHMITT_LSB _u(1)
|
|
#define PADS_QSPI_GPIO_QSPI_SCLK_SCHMITT_ACCESS "RW"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : PADS_QSPI_GPIO_QSPI_SCLK_SLEWFAST
|
|
// Description : Slew rate control. 1 = Fast, 0 = Slow
|
|
#define PADS_QSPI_GPIO_QSPI_SCLK_SLEWFAST_RESET _u(0x0)
|
|
#define PADS_QSPI_GPIO_QSPI_SCLK_SLEWFAST_BITS _u(0x00000001)
|
|
#define PADS_QSPI_GPIO_QSPI_SCLK_SLEWFAST_MSB _u(0)
|
|
#define PADS_QSPI_GPIO_QSPI_SCLK_SLEWFAST_LSB _u(0)
|
|
#define PADS_QSPI_GPIO_QSPI_SCLK_SLEWFAST_ACCESS "RW"
|
|
// =============================================================================
|
|
// Register : PADS_QSPI_GPIO_QSPI_SD0
|
|
// Description : Pad control register
|
|
#define PADS_QSPI_GPIO_QSPI_SD0_OFFSET _u(0x00000008)
|
|
#define PADS_QSPI_GPIO_QSPI_SD0_BITS _u(0x000000ff)
|
|
#define PADS_QSPI_GPIO_QSPI_SD0_RESET _u(0x00000052)
|
|
// -----------------------------------------------------------------------------
|
|
// Field : PADS_QSPI_GPIO_QSPI_SD0_OD
|
|
// Description : Output disable. Has priority over output enable from
|
|
// peripherals
|
|
#define PADS_QSPI_GPIO_QSPI_SD0_OD_RESET _u(0x0)
|
|
#define PADS_QSPI_GPIO_QSPI_SD0_OD_BITS _u(0x00000080)
|
|
#define PADS_QSPI_GPIO_QSPI_SD0_OD_MSB _u(7)
|
|
#define PADS_QSPI_GPIO_QSPI_SD0_OD_LSB _u(7)
|
|
#define PADS_QSPI_GPIO_QSPI_SD0_OD_ACCESS "RW"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : PADS_QSPI_GPIO_QSPI_SD0_IE
|
|
// Description : Input enable
|
|
#define PADS_QSPI_GPIO_QSPI_SD0_IE_RESET _u(0x1)
|
|
#define PADS_QSPI_GPIO_QSPI_SD0_IE_BITS _u(0x00000040)
|
|
#define PADS_QSPI_GPIO_QSPI_SD0_IE_MSB _u(6)
|
|
#define PADS_QSPI_GPIO_QSPI_SD0_IE_LSB _u(6)
|
|
#define PADS_QSPI_GPIO_QSPI_SD0_IE_ACCESS "RW"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : PADS_QSPI_GPIO_QSPI_SD0_DRIVE
|
|
// Description : Drive strength.
|
|
// 0x0 -> 2mA
|
|
// 0x1 -> 4mA
|
|
// 0x2 -> 8mA
|
|
// 0x3 -> 12mA
|
|
#define PADS_QSPI_GPIO_QSPI_SD0_DRIVE_RESET _u(0x1)
|
|
#define PADS_QSPI_GPIO_QSPI_SD0_DRIVE_BITS _u(0x00000030)
|
|
#define PADS_QSPI_GPIO_QSPI_SD0_DRIVE_MSB _u(5)
|
|
#define PADS_QSPI_GPIO_QSPI_SD0_DRIVE_LSB _u(4)
|
|
#define PADS_QSPI_GPIO_QSPI_SD0_DRIVE_ACCESS "RW"
|
|
#define PADS_QSPI_GPIO_QSPI_SD0_DRIVE_VALUE_2MA _u(0x0)
|
|
#define PADS_QSPI_GPIO_QSPI_SD0_DRIVE_VALUE_4MA _u(0x1)
|
|
#define PADS_QSPI_GPIO_QSPI_SD0_DRIVE_VALUE_8MA _u(0x2)
|
|
#define PADS_QSPI_GPIO_QSPI_SD0_DRIVE_VALUE_12MA _u(0x3)
|
|
// -----------------------------------------------------------------------------
|
|
// Field : PADS_QSPI_GPIO_QSPI_SD0_PUE
|
|
// Description : Pull up enable
|
|
#define PADS_QSPI_GPIO_QSPI_SD0_PUE_RESET _u(0x0)
|
|
#define PADS_QSPI_GPIO_QSPI_SD0_PUE_BITS _u(0x00000008)
|
|
#define PADS_QSPI_GPIO_QSPI_SD0_PUE_MSB _u(3)
|
|
#define PADS_QSPI_GPIO_QSPI_SD0_PUE_LSB _u(3)
|
|
#define PADS_QSPI_GPIO_QSPI_SD0_PUE_ACCESS "RW"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : PADS_QSPI_GPIO_QSPI_SD0_PDE
|
|
// Description : Pull down enable
|
|
#define PADS_QSPI_GPIO_QSPI_SD0_PDE_RESET _u(0x0)
|
|
#define PADS_QSPI_GPIO_QSPI_SD0_PDE_BITS _u(0x00000004)
|
|
#define PADS_QSPI_GPIO_QSPI_SD0_PDE_MSB _u(2)
|
|
#define PADS_QSPI_GPIO_QSPI_SD0_PDE_LSB _u(2)
|
|
#define PADS_QSPI_GPIO_QSPI_SD0_PDE_ACCESS "RW"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : PADS_QSPI_GPIO_QSPI_SD0_SCHMITT
|
|
// Description : Enable schmitt trigger
|
|
#define PADS_QSPI_GPIO_QSPI_SD0_SCHMITT_RESET _u(0x1)
|
|
#define PADS_QSPI_GPIO_QSPI_SD0_SCHMITT_BITS _u(0x00000002)
|
|
#define PADS_QSPI_GPIO_QSPI_SD0_SCHMITT_MSB _u(1)
|
|
#define PADS_QSPI_GPIO_QSPI_SD0_SCHMITT_LSB _u(1)
|
|
#define PADS_QSPI_GPIO_QSPI_SD0_SCHMITT_ACCESS "RW"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : PADS_QSPI_GPIO_QSPI_SD0_SLEWFAST
|
|
// Description : Slew rate control. 1 = Fast, 0 = Slow
|
|
#define PADS_QSPI_GPIO_QSPI_SD0_SLEWFAST_RESET _u(0x0)
|
|
#define PADS_QSPI_GPIO_QSPI_SD0_SLEWFAST_BITS _u(0x00000001)
|
|
#define PADS_QSPI_GPIO_QSPI_SD0_SLEWFAST_MSB _u(0)
|
|
#define PADS_QSPI_GPIO_QSPI_SD0_SLEWFAST_LSB _u(0)
|
|
#define PADS_QSPI_GPIO_QSPI_SD0_SLEWFAST_ACCESS "RW"
|
|
// =============================================================================
|
|
// Register : PADS_QSPI_GPIO_QSPI_SD1
|
|
// Description : Pad control register
|
|
#define PADS_QSPI_GPIO_QSPI_SD1_OFFSET _u(0x0000000c)
|
|
#define PADS_QSPI_GPIO_QSPI_SD1_BITS _u(0x000000ff)
|
|
#define PADS_QSPI_GPIO_QSPI_SD1_RESET _u(0x00000052)
|
|
// -----------------------------------------------------------------------------
|
|
// Field : PADS_QSPI_GPIO_QSPI_SD1_OD
|
|
// Description : Output disable. Has priority over output enable from
|
|
// peripherals
|
|
#define PADS_QSPI_GPIO_QSPI_SD1_OD_RESET _u(0x0)
|
|
#define PADS_QSPI_GPIO_QSPI_SD1_OD_BITS _u(0x00000080)
|
|
#define PADS_QSPI_GPIO_QSPI_SD1_OD_MSB _u(7)
|
|
#define PADS_QSPI_GPIO_QSPI_SD1_OD_LSB _u(7)
|
|
#define PADS_QSPI_GPIO_QSPI_SD1_OD_ACCESS "RW"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : PADS_QSPI_GPIO_QSPI_SD1_IE
|
|
// Description : Input enable
|
|
#define PADS_QSPI_GPIO_QSPI_SD1_IE_RESET _u(0x1)
|
|
#define PADS_QSPI_GPIO_QSPI_SD1_IE_BITS _u(0x00000040)
|
|
#define PADS_QSPI_GPIO_QSPI_SD1_IE_MSB _u(6)
|
|
#define PADS_QSPI_GPIO_QSPI_SD1_IE_LSB _u(6)
|
|
#define PADS_QSPI_GPIO_QSPI_SD1_IE_ACCESS "RW"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : PADS_QSPI_GPIO_QSPI_SD1_DRIVE
|
|
// Description : Drive strength.
|
|
// 0x0 -> 2mA
|
|
// 0x1 -> 4mA
|
|
// 0x2 -> 8mA
|
|
// 0x3 -> 12mA
|
|
#define PADS_QSPI_GPIO_QSPI_SD1_DRIVE_RESET _u(0x1)
|
|
#define PADS_QSPI_GPIO_QSPI_SD1_DRIVE_BITS _u(0x00000030)
|
|
#define PADS_QSPI_GPIO_QSPI_SD1_DRIVE_MSB _u(5)
|
|
#define PADS_QSPI_GPIO_QSPI_SD1_DRIVE_LSB _u(4)
|
|
#define PADS_QSPI_GPIO_QSPI_SD1_DRIVE_ACCESS "RW"
|
|
#define PADS_QSPI_GPIO_QSPI_SD1_DRIVE_VALUE_2MA _u(0x0)
|
|
#define PADS_QSPI_GPIO_QSPI_SD1_DRIVE_VALUE_4MA _u(0x1)
|
|
#define PADS_QSPI_GPIO_QSPI_SD1_DRIVE_VALUE_8MA _u(0x2)
|
|
#define PADS_QSPI_GPIO_QSPI_SD1_DRIVE_VALUE_12MA _u(0x3)
|
|
// -----------------------------------------------------------------------------
|
|
// Field : PADS_QSPI_GPIO_QSPI_SD1_PUE
|
|
// Description : Pull up enable
|
|
#define PADS_QSPI_GPIO_QSPI_SD1_PUE_RESET _u(0x0)
|
|
#define PADS_QSPI_GPIO_QSPI_SD1_PUE_BITS _u(0x00000008)
|
|
#define PADS_QSPI_GPIO_QSPI_SD1_PUE_MSB _u(3)
|
|
#define PADS_QSPI_GPIO_QSPI_SD1_PUE_LSB _u(3)
|
|
#define PADS_QSPI_GPIO_QSPI_SD1_PUE_ACCESS "RW"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : PADS_QSPI_GPIO_QSPI_SD1_PDE
|
|
// Description : Pull down enable
|
|
#define PADS_QSPI_GPIO_QSPI_SD1_PDE_RESET _u(0x0)
|
|
#define PADS_QSPI_GPIO_QSPI_SD1_PDE_BITS _u(0x00000004)
|
|
#define PADS_QSPI_GPIO_QSPI_SD1_PDE_MSB _u(2)
|
|
#define PADS_QSPI_GPIO_QSPI_SD1_PDE_LSB _u(2)
|
|
#define PADS_QSPI_GPIO_QSPI_SD1_PDE_ACCESS "RW"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : PADS_QSPI_GPIO_QSPI_SD1_SCHMITT
|
|
// Description : Enable schmitt trigger
|
|
#define PADS_QSPI_GPIO_QSPI_SD1_SCHMITT_RESET _u(0x1)
|
|
#define PADS_QSPI_GPIO_QSPI_SD1_SCHMITT_BITS _u(0x00000002)
|
|
#define PADS_QSPI_GPIO_QSPI_SD1_SCHMITT_MSB _u(1)
|
|
#define PADS_QSPI_GPIO_QSPI_SD1_SCHMITT_LSB _u(1)
|
|
#define PADS_QSPI_GPIO_QSPI_SD1_SCHMITT_ACCESS "RW"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : PADS_QSPI_GPIO_QSPI_SD1_SLEWFAST
|
|
// Description : Slew rate control. 1 = Fast, 0 = Slow
|
|
#define PADS_QSPI_GPIO_QSPI_SD1_SLEWFAST_RESET _u(0x0)
|
|
#define PADS_QSPI_GPIO_QSPI_SD1_SLEWFAST_BITS _u(0x00000001)
|
|
#define PADS_QSPI_GPIO_QSPI_SD1_SLEWFAST_MSB _u(0)
|
|
#define PADS_QSPI_GPIO_QSPI_SD1_SLEWFAST_LSB _u(0)
|
|
#define PADS_QSPI_GPIO_QSPI_SD1_SLEWFAST_ACCESS "RW"
|
|
// =============================================================================
|
|
// Register : PADS_QSPI_GPIO_QSPI_SD2
|
|
// Description : Pad control register
|
|
#define PADS_QSPI_GPIO_QSPI_SD2_OFFSET _u(0x00000010)
|
|
#define PADS_QSPI_GPIO_QSPI_SD2_BITS _u(0x000000ff)
|
|
#define PADS_QSPI_GPIO_QSPI_SD2_RESET _u(0x00000052)
|
|
// -----------------------------------------------------------------------------
|
|
// Field : PADS_QSPI_GPIO_QSPI_SD2_OD
|
|
// Description : Output disable. Has priority over output enable from
|
|
// peripherals
|
|
#define PADS_QSPI_GPIO_QSPI_SD2_OD_RESET _u(0x0)
|
|
#define PADS_QSPI_GPIO_QSPI_SD2_OD_BITS _u(0x00000080)
|
|
#define PADS_QSPI_GPIO_QSPI_SD2_OD_MSB _u(7)
|
|
#define PADS_QSPI_GPIO_QSPI_SD2_OD_LSB _u(7)
|
|
#define PADS_QSPI_GPIO_QSPI_SD2_OD_ACCESS "RW"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : PADS_QSPI_GPIO_QSPI_SD2_IE
|
|
// Description : Input enable
|
|
#define PADS_QSPI_GPIO_QSPI_SD2_IE_RESET _u(0x1)
|
|
#define PADS_QSPI_GPIO_QSPI_SD2_IE_BITS _u(0x00000040)
|
|
#define PADS_QSPI_GPIO_QSPI_SD2_IE_MSB _u(6)
|
|
#define PADS_QSPI_GPIO_QSPI_SD2_IE_LSB _u(6)
|
|
#define PADS_QSPI_GPIO_QSPI_SD2_IE_ACCESS "RW"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : PADS_QSPI_GPIO_QSPI_SD2_DRIVE
|
|
// Description : Drive strength.
|
|
// 0x0 -> 2mA
|
|
// 0x1 -> 4mA
|
|
// 0x2 -> 8mA
|
|
// 0x3 -> 12mA
|
|
#define PADS_QSPI_GPIO_QSPI_SD2_DRIVE_RESET _u(0x1)
|
|
#define PADS_QSPI_GPIO_QSPI_SD2_DRIVE_BITS _u(0x00000030)
|
|
#define PADS_QSPI_GPIO_QSPI_SD2_DRIVE_MSB _u(5)
|
|
#define PADS_QSPI_GPIO_QSPI_SD2_DRIVE_LSB _u(4)
|
|
#define PADS_QSPI_GPIO_QSPI_SD2_DRIVE_ACCESS "RW"
|
|
#define PADS_QSPI_GPIO_QSPI_SD2_DRIVE_VALUE_2MA _u(0x0)
|
|
#define PADS_QSPI_GPIO_QSPI_SD2_DRIVE_VALUE_4MA _u(0x1)
|
|
#define PADS_QSPI_GPIO_QSPI_SD2_DRIVE_VALUE_8MA _u(0x2)
|
|
#define PADS_QSPI_GPIO_QSPI_SD2_DRIVE_VALUE_12MA _u(0x3)
|
|
// -----------------------------------------------------------------------------
|
|
// Field : PADS_QSPI_GPIO_QSPI_SD2_PUE
|
|
// Description : Pull up enable
|
|
#define PADS_QSPI_GPIO_QSPI_SD2_PUE_RESET _u(0x0)
|
|
#define PADS_QSPI_GPIO_QSPI_SD2_PUE_BITS _u(0x00000008)
|
|
#define PADS_QSPI_GPIO_QSPI_SD2_PUE_MSB _u(3)
|
|
#define PADS_QSPI_GPIO_QSPI_SD2_PUE_LSB _u(3)
|
|
#define PADS_QSPI_GPIO_QSPI_SD2_PUE_ACCESS "RW"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : PADS_QSPI_GPIO_QSPI_SD2_PDE
|
|
// Description : Pull down enable
|
|
#define PADS_QSPI_GPIO_QSPI_SD2_PDE_RESET _u(0x0)
|
|
#define PADS_QSPI_GPIO_QSPI_SD2_PDE_BITS _u(0x00000004)
|
|
#define PADS_QSPI_GPIO_QSPI_SD2_PDE_MSB _u(2)
|
|
#define PADS_QSPI_GPIO_QSPI_SD2_PDE_LSB _u(2)
|
|
#define PADS_QSPI_GPIO_QSPI_SD2_PDE_ACCESS "RW"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : PADS_QSPI_GPIO_QSPI_SD2_SCHMITT
|
|
// Description : Enable schmitt trigger
|
|
#define PADS_QSPI_GPIO_QSPI_SD2_SCHMITT_RESET _u(0x1)
|
|
#define PADS_QSPI_GPIO_QSPI_SD2_SCHMITT_BITS _u(0x00000002)
|
|
#define PADS_QSPI_GPIO_QSPI_SD2_SCHMITT_MSB _u(1)
|
|
#define PADS_QSPI_GPIO_QSPI_SD2_SCHMITT_LSB _u(1)
|
|
#define PADS_QSPI_GPIO_QSPI_SD2_SCHMITT_ACCESS "RW"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : PADS_QSPI_GPIO_QSPI_SD2_SLEWFAST
|
|
// Description : Slew rate control. 1 = Fast, 0 = Slow
|
|
#define PADS_QSPI_GPIO_QSPI_SD2_SLEWFAST_RESET _u(0x0)
|
|
#define PADS_QSPI_GPIO_QSPI_SD2_SLEWFAST_BITS _u(0x00000001)
|
|
#define PADS_QSPI_GPIO_QSPI_SD2_SLEWFAST_MSB _u(0)
|
|
#define PADS_QSPI_GPIO_QSPI_SD2_SLEWFAST_LSB _u(0)
|
|
#define PADS_QSPI_GPIO_QSPI_SD2_SLEWFAST_ACCESS "RW"
|
|
// =============================================================================
|
|
// Register : PADS_QSPI_GPIO_QSPI_SD3
|
|
// Description : Pad control register
|
|
#define PADS_QSPI_GPIO_QSPI_SD3_OFFSET _u(0x00000014)
|
|
#define PADS_QSPI_GPIO_QSPI_SD3_BITS _u(0x000000ff)
|
|
#define PADS_QSPI_GPIO_QSPI_SD3_RESET _u(0x00000052)
|
|
// -----------------------------------------------------------------------------
|
|
// Field : PADS_QSPI_GPIO_QSPI_SD3_OD
|
|
// Description : Output disable. Has priority over output enable from
|
|
// peripherals
|
|
#define PADS_QSPI_GPIO_QSPI_SD3_OD_RESET _u(0x0)
|
|
#define PADS_QSPI_GPIO_QSPI_SD3_OD_BITS _u(0x00000080)
|
|
#define PADS_QSPI_GPIO_QSPI_SD3_OD_MSB _u(7)
|
|
#define PADS_QSPI_GPIO_QSPI_SD3_OD_LSB _u(7)
|
|
#define PADS_QSPI_GPIO_QSPI_SD3_OD_ACCESS "RW"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : PADS_QSPI_GPIO_QSPI_SD3_IE
|
|
// Description : Input enable
|
|
#define PADS_QSPI_GPIO_QSPI_SD3_IE_RESET _u(0x1)
|
|
#define PADS_QSPI_GPIO_QSPI_SD3_IE_BITS _u(0x00000040)
|
|
#define PADS_QSPI_GPIO_QSPI_SD3_IE_MSB _u(6)
|
|
#define PADS_QSPI_GPIO_QSPI_SD3_IE_LSB _u(6)
|
|
#define PADS_QSPI_GPIO_QSPI_SD3_IE_ACCESS "RW"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : PADS_QSPI_GPIO_QSPI_SD3_DRIVE
|
|
// Description : Drive strength.
|
|
// 0x0 -> 2mA
|
|
// 0x1 -> 4mA
|
|
// 0x2 -> 8mA
|
|
// 0x3 -> 12mA
|
|
#define PADS_QSPI_GPIO_QSPI_SD3_DRIVE_RESET _u(0x1)
|
|
#define PADS_QSPI_GPIO_QSPI_SD3_DRIVE_BITS _u(0x00000030)
|
|
#define PADS_QSPI_GPIO_QSPI_SD3_DRIVE_MSB _u(5)
|
|
#define PADS_QSPI_GPIO_QSPI_SD3_DRIVE_LSB _u(4)
|
|
#define PADS_QSPI_GPIO_QSPI_SD3_DRIVE_ACCESS "RW"
|
|
#define PADS_QSPI_GPIO_QSPI_SD3_DRIVE_VALUE_2MA _u(0x0)
|
|
#define PADS_QSPI_GPIO_QSPI_SD3_DRIVE_VALUE_4MA _u(0x1)
|
|
#define PADS_QSPI_GPIO_QSPI_SD3_DRIVE_VALUE_8MA _u(0x2)
|
|
#define PADS_QSPI_GPIO_QSPI_SD3_DRIVE_VALUE_12MA _u(0x3)
|
|
// -----------------------------------------------------------------------------
|
|
// Field : PADS_QSPI_GPIO_QSPI_SD3_PUE
|
|
// Description : Pull up enable
|
|
#define PADS_QSPI_GPIO_QSPI_SD3_PUE_RESET _u(0x0)
|
|
#define PADS_QSPI_GPIO_QSPI_SD3_PUE_BITS _u(0x00000008)
|
|
#define PADS_QSPI_GPIO_QSPI_SD3_PUE_MSB _u(3)
|
|
#define PADS_QSPI_GPIO_QSPI_SD3_PUE_LSB _u(3)
|
|
#define PADS_QSPI_GPIO_QSPI_SD3_PUE_ACCESS "RW"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : PADS_QSPI_GPIO_QSPI_SD3_PDE
|
|
// Description : Pull down enable
|
|
#define PADS_QSPI_GPIO_QSPI_SD3_PDE_RESET _u(0x0)
|
|
#define PADS_QSPI_GPIO_QSPI_SD3_PDE_BITS _u(0x00000004)
|
|
#define PADS_QSPI_GPIO_QSPI_SD3_PDE_MSB _u(2)
|
|
#define PADS_QSPI_GPIO_QSPI_SD3_PDE_LSB _u(2)
|
|
#define PADS_QSPI_GPIO_QSPI_SD3_PDE_ACCESS "RW"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : PADS_QSPI_GPIO_QSPI_SD3_SCHMITT
|
|
// Description : Enable schmitt trigger
|
|
#define PADS_QSPI_GPIO_QSPI_SD3_SCHMITT_RESET _u(0x1)
|
|
#define PADS_QSPI_GPIO_QSPI_SD3_SCHMITT_BITS _u(0x00000002)
|
|
#define PADS_QSPI_GPIO_QSPI_SD3_SCHMITT_MSB _u(1)
|
|
#define PADS_QSPI_GPIO_QSPI_SD3_SCHMITT_LSB _u(1)
|
|
#define PADS_QSPI_GPIO_QSPI_SD3_SCHMITT_ACCESS "RW"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : PADS_QSPI_GPIO_QSPI_SD3_SLEWFAST
|
|
// Description : Slew rate control. 1 = Fast, 0 = Slow
|
|
#define PADS_QSPI_GPIO_QSPI_SD3_SLEWFAST_RESET _u(0x0)
|
|
#define PADS_QSPI_GPIO_QSPI_SD3_SLEWFAST_BITS _u(0x00000001)
|
|
#define PADS_QSPI_GPIO_QSPI_SD3_SLEWFAST_MSB _u(0)
|
|
#define PADS_QSPI_GPIO_QSPI_SD3_SLEWFAST_LSB _u(0)
|
|
#define PADS_QSPI_GPIO_QSPI_SD3_SLEWFAST_ACCESS "RW"
|
|
// =============================================================================
|
|
// Register : PADS_QSPI_GPIO_QSPI_SS
|
|
// Description : Pad control register
|
|
#define PADS_QSPI_GPIO_QSPI_SS_OFFSET _u(0x00000018)
|
|
#define PADS_QSPI_GPIO_QSPI_SS_BITS _u(0x000000ff)
|
|
#define PADS_QSPI_GPIO_QSPI_SS_RESET _u(0x0000005a)
|
|
// -----------------------------------------------------------------------------
|
|
// Field : PADS_QSPI_GPIO_QSPI_SS_OD
|
|
// Description : Output disable. Has priority over output enable from
|
|
// peripherals
|
|
#define PADS_QSPI_GPIO_QSPI_SS_OD_RESET _u(0x0)
|
|
#define PADS_QSPI_GPIO_QSPI_SS_OD_BITS _u(0x00000080)
|
|
#define PADS_QSPI_GPIO_QSPI_SS_OD_MSB _u(7)
|
|
#define PADS_QSPI_GPIO_QSPI_SS_OD_LSB _u(7)
|
|
#define PADS_QSPI_GPIO_QSPI_SS_OD_ACCESS "RW"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : PADS_QSPI_GPIO_QSPI_SS_IE
|
|
// Description : Input enable
|
|
#define PADS_QSPI_GPIO_QSPI_SS_IE_RESET _u(0x1)
|
|
#define PADS_QSPI_GPIO_QSPI_SS_IE_BITS _u(0x00000040)
|
|
#define PADS_QSPI_GPIO_QSPI_SS_IE_MSB _u(6)
|
|
#define PADS_QSPI_GPIO_QSPI_SS_IE_LSB _u(6)
|
|
#define PADS_QSPI_GPIO_QSPI_SS_IE_ACCESS "RW"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : PADS_QSPI_GPIO_QSPI_SS_DRIVE
|
|
// Description : Drive strength.
|
|
// 0x0 -> 2mA
|
|
// 0x1 -> 4mA
|
|
// 0x2 -> 8mA
|
|
// 0x3 -> 12mA
|
|
#define PADS_QSPI_GPIO_QSPI_SS_DRIVE_RESET _u(0x1)
|
|
#define PADS_QSPI_GPIO_QSPI_SS_DRIVE_BITS _u(0x00000030)
|
|
#define PADS_QSPI_GPIO_QSPI_SS_DRIVE_MSB _u(5)
|
|
#define PADS_QSPI_GPIO_QSPI_SS_DRIVE_LSB _u(4)
|
|
#define PADS_QSPI_GPIO_QSPI_SS_DRIVE_ACCESS "RW"
|
|
#define PADS_QSPI_GPIO_QSPI_SS_DRIVE_VALUE_2MA _u(0x0)
|
|
#define PADS_QSPI_GPIO_QSPI_SS_DRIVE_VALUE_4MA _u(0x1)
|
|
#define PADS_QSPI_GPIO_QSPI_SS_DRIVE_VALUE_8MA _u(0x2)
|
|
#define PADS_QSPI_GPIO_QSPI_SS_DRIVE_VALUE_12MA _u(0x3)
|
|
// -----------------------------------------------------------------------------
|
|
// Field : PADS_QSPI_GPIO_QSPI_SS_PUE
|
|
// Description : Pull up enable
|
|
#define PADS_QSPI_GPIO_QSPI_SS_PUE_RESET _u(0x1)
|
|
#define PADS_QSPI_GPIO_QSPI_SS_PUE_BITS _u(0x00000008)
|
|
#define PADS_QSPI_GPIO_QSPI_SS_PUE_MSB _u(3)
|
|
#define PADS_QSPI_GPIO_QSPI_SS_PUE_LSB _u(3)
|
|
#define PADS_QSPI_GPIO_QSPI_SS_PUE_ACCESS "RW"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : PADS_QSPI_GPIO_QSPI_SS_PDE
|
|
// Description : Pull down enable
|
|
#define PADS_QSPI_GPIO_QSPI_SS_PDE_RESET _u(0x0)
|
|
#define PADS_QSPI_GPIO_QSPI_SS_PDE_BITS _u(0x00000004)
|
|
#define PADS_QSPI_GPIO_QSPI_SS_PDE_MSB _u(2)
|
|
#define PADS_QSPI_GPIO_QSPI_SS_PDE_LSB _u(2)
|
|
#define PADS_QSPI_GPIO_QSPI_SS_PDE_ACCESS "RW"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : PADS_QSPI_GPIO_QSPI_SS_SCHMITT
|
|
// Description : Enable schmitt trigger
|
|
#define PADS_QSPI_GPIO_QSPI_SS_SCHMITT_RESET _u(0x1)
|
|
#define PADS_QSPI_GPIO_QSPI_SS_SCHMITT_BITS _u(0x00000002)
|
|
#define PADS_QSPI_GPIO_QSPI_SS_SCHMITT_MSB _u(1)
|
|
#define PADS_QSPI_GPIO_QSPI_SS_SCHMITT_LSB _u(1)
|
|
#define PADS_QSPI_GPIO_QSPI_SS_SCHMITT_ACCESS "RW"
|
|
// -----------------------------------------------------------------------------
|
|
// Field : PADS_QSPI_GPIO_QSPI_SS_SLEWFAST
|
|
// Description : Slew rate control. 1 = Fast, 0 = Slow
|
|
#define PADS_QSPI_GPIO_QSPI_SS_SLEWFAST_RESET _u(0x0)
|
|
#define PADS_QSPI_GPIO_QSPI_SS_SLEWFAST_BITS _u(0x00000001)
|
|
#define PADS_QSPI_GPIO_QSPI_SS_SLEWFAST_MSB _u(0)
|
|
#define PADS_QSPI_GPIO_QSPI_SS_SLEWFAST_LSB _u(0)
|
|
#define PADS_QSPI_GPIO_QSPI_SS_SLEWFAST_ACCESS "RW"
|
|
// =============================================================================
|
|
#endif // HARDWARE_REGS_PADS_QSPI_DEFINED
|