mirror of https://github.com/Desuuuu/klipper.git
195 lines
4.2 KiB
INI
195 lines
4.2 KiB
INI
# This file contains common pin mappings for the Biqu B1 SE Plus.
|
|
# To use this config, the firmware should be compiled for the
|
|
# STM32F407 with a "32KiB bootloader".
|
|
|
|
# In newer versions of this board shipped in late 2021 the STM32F429
|
|
# is used, if this is the case compile for this with a "32KiB bootloader"
|
|
# You will need to check the chip on your board to identify which you have.
|
|
#
|
|
# The "make flash" command does not work on the SKR 2. Instead,
|
|
# after running "make", copy the generated "out/klipper.bin" file to a
|
|
# file named "firmware.bin" on an SD card and then restart the SKR 2
|
|
# with that SD card.
|
|
|
|
# See docs/Config_Reference.md for a description of parameters.
|
|
|
|
[mcu]
|
|
serial: /dev/serial/by-id/usb-Klipper_stm32f407xx_1D0039000F47393438343535-if00
|
|
|
|
########################################
|
|
# Stepper X Pins and TMC2208 configuration
|
|
########################################
|
|
[stepper_x]
|
|
step_pin: PE2
|
|
dir_pin: !PE1
|
|
enable_pin: !PE3
|
|
microsteps: 16
|
|
rotation_distance: 40
|
|
endstop_pin: !PC1
|
|
position_endstop: 0
|
|
position_max: 310
|
|
homing_speed: 50
|
|
|
|
[tmc2208 stepper_x]
|
|
uart_pin: PE0
|
|
run_current: 0.800
|
|
stealthchop_threshold: 999999
|
|
|
|
########################################
|
|
# Stepper Y Pins and TMC2208 configuration
|
|
########################################
|
|
[stepper_y]
|
|
step_pin: PD5
|
|
dir_pin: PD4
|
|
enable_pin: !PD6
|
|
microsteps: 16
|
|
rotation_distance: 40
|
|
endstop_pin: !PC3
|
|
position_endstop: 0
|
|
position_max: 310
|
|
homing_speed: 50
|
|
|
|
[tmc2208 stepper_y]
|
|
uart_pin: PD3
|
|
run_current: 0.800
|
|
stealthchop_threshold: 999999
|
|
|
|
########################################
|
|
# Stepper Z Pins and TMC2208 configuration
|
|
########################################
|
|
[stepper_z]
|
|
step_pin: PA15
|
|
dir_pin: PA8
|
|
enable_pin: !PD1
|
|
microsteps: 16
|
|
rotation_distance: 8
|
|
endstop_pin: probe:z_virtual_endstop
|
|
homing_speed: 10
|
|
second_homing_speed: 1
|
|
position_min: -2
|
|
position_max: 340
|
|
|
|
[tmc2208 stepper_z]
|
|
uart_pin: PD0
|
|
run_current: 0.800
|
|
stealthchop_threshold: 999999
|
|
|
|
########################################
|
|
# Extruder Pins and TMC2208 configuration
|
|
########################################
|
|
[extruder]
|
|
step_pin: PD15
|
|
dir_pin: !PD14
|
|
enable_pin: !PC7
|
|
microsteps: 16
|
|
rotation_distance: 34.2152 # Calibrar - ver https://www.klipper3d.org/Rotation_Distance.html
|
|
nozzle_diameter: 0.400
|
|
filament_diameter: 1.750
|
|
heater_pin: PB3
|
|
sensor_type: Generic 3950
|
|
sensor_pin: PA2 #thermistor pin
|
|
control: pid
|
|
pid_Kp: 22.2
|
|
pid_Ki: 1.08
|
|
pid_Kd: 114
|
|
min_temp: 0
|
|
max_temp: 250
|
|
|
|
[tmc2208 extruder]
|
|
uart_pin: PC6
|
|
run_current: 0.800
|
|
stealthchop_threshold: 999999
|
|
|
|
########################################
|
|
# Heater Bed Pins
|
|
########################################
|
|
[heater_bed]
|
|
heater_pin: PD7
|
|
sensor_type: Generic 3950
|
|
sensor_pin: PA1
|
|
control: pid
|
|
pid_Kp: 54
|
|
pid_Ki: 0.77
|
|
pid_Kd: 900
|
|
min_temp: 0
|
|
max_temp: 110
|
|
|
|
########################################
|
|
# Printer Configuration
|
|
########################################
|
|
[printer]
|
|
kinematics: cartesian
|
|
max_velocity: 200
|
|
max_accel: 1000
|
|
max_z_velocity: 5
|
|
max_z_accel: 100
|
|
|
|
########################################
|
|
# Probe configuration
|
|
########################################
|
|
[probe]
|
|
pin: ^!PE4
|
|
z_offset: 0.0
|
|
x_offset: 0.0
|
|
y_offset: 0.0
|
|
speed: 10.0
|
|
samples: 2
|
|
samples_result: average
|
|
sample_retract_dist: 2.0
|
|
samples_tolerance: 0.2
|
|
|
|
[safe_z_home]
|
|
home_xy_position: 155,155
|
|
speed: 100
|
|
z_hop: 5
|
|
z_hop_speed: 5
|
|
|
|
[output_pin probe_enable]
|
|
pin: PE5
|
|
value: 1
|
|
|
|
########################################
|
|
# Bed Mesh configuration
|
|
########################################
|
|
[bed_mesh]
|
|
speed: 2000
|
|
horizontal_move_z: 3
|
|
mesh_min: 20, 20
|
|
mesh_max: 290, 290
|
|
probe_count: 7, 7
|
|
mesh_pps: 2,2
|
|
algorithm: bicubic
|
|
bicubic_tension: 0.2
|
|
|
|
########################################
|
|
# Fan Nozzle configuration
|
|
########################################
|
|
[fan]
|
|
pin: PB7
|
|
|
|
[heater_fan Cooling_fan]
|
|
pin: PB6
|
|
max_power: 1.0
|
|
kick_start_time: 0.100
|
|
heater: heater_bed
|
|
|
|
[heater_fan Board_fan]
|
|
pin: PB5
|
|
max_power: 1.0
|
|
kick_start_time: 0.100
|
|
heater: extruder
|
|
|
|
########################################
|
|
# Filament Sensor configuration
|
|
########################################
|
|
[filament_switch_sensor Sensor_Filamento]
|
|
switch_pin: !PC2
|
|
pause_on_runout: true #pause handled by macro
|
|
|
|
########################################
|
|
# Motor Power Pin
|
|
########################################
|
|
[output_pin motor_power]
|
|
pin: PC13
|
|
value: 1
|