| .. |
|
avrsim.cfg
|
config: Update avrsim.cfg to use unique pins
|
2018-01-12 16:44:21 -05:00 |
|
example-corexy.cfg
|
config: Use .0025 as the default z step_distance in sample configs
|
2018-02-25 16:00:55 -05:00 |
|
example-delta.cfg
|
probe: Move multi-sampling capability from ProbePointsHelper to Probe
|
2019-06-06 10:08:58 -04:00 |
|
example-extras.cfg
|
config: No need to list all tmc drivers in endstop_phase description
|
2019-06-23 12:27:09 -04:00 |
|
example-menu.cfg
|
menu: enhancements
|
2019-01-07 21:39:50 -05:00 |
|
example-multi-mcu.cfg
|
docs: Update documentation to note use of /dev/serial/by-path/
|
2018-06-01 17:22:03 -04:00 |
|
example-polar.cfg
|
polar: Experimental support for polar kinematics
|
2018-12-24 11:38:59 -05:00 |
|
example-winch.cfg
|
winch: Add experimental support for cable winch kinematics
|
2018-12-24 11:38:59 -05:00 |
|
example.cfg
|
thermistor: Add support for printers with an "inline_resistor"
|
2019-06-02 10:59:23 -04:00 |
|
generic-azteeg-x5-mini-v3.cfg
|
config: Clarify which boards use lpc1768 vs lpc1769 when known
|
2019-06-20 11:23:30 -04:00 |
|
generic-bigtreetech-skr-v1.1.cfg
|
config: Clarify which boards use lpc1768 vs lpc1769 when known
|
2019-06-20 11:23:30 -04:00 |
|
generic-bigtreetech-skr-v1.3.cfg
|
config: Clarify which boards use lpc1768 vs lpc1769 when known
|
2019-06-20 11:23:30 -04:00 |
|
generic-cramps.cfg
|
pru: Disable ADC reading directly from the PRU
|
2018-06-27 12:10:25 -04:00 |
|
generic-duet2-maestro.cfg
|
config: Add LCD settings to config/generic-duet2-maestro.cfg
|
2019-06-13 11:29:55 -04:00 |
|
generic-duet2.cfg
|
atsam: Use enumerations for buses and reserve pins
|
2019-04-04 18:29:31 -04:00 |
|
generic-einsy-rambo.cfg
|
tmc2130: Initial support for sensorless homing
|
2018-05-25 11:38:23 -04:00 |
|
generic-fysetc-f6.cfg
|
config: Force PB0 high in fysetc f6 config
|
2019-05-24 18:07:41 -04:00 |
|
generic-gt2560.cfg
|
config: Added example config file for Geeetech gt2560 controller.
|
2019-01-28 11:20:01 -05:00 |
|
generic-melzi.cfg
|
config: Use consistent advice on flashing the Melzi board
|
2018-11-13 14:32:52 -05:00 |
|
generic-mini-rambo.cfg
|
config: Use fastest PWM time in mini-rambo PWM DAC config
|
2018-09-11 09:40:48 -04:00 |
|
generic-minitronics1.cfg
|
config: Add a generic-minitronics1.cfg example config file
|
2018-12-20 11:09:20 -05:00 |
|
generic-printrboard-g2.cfg
|
config: Add generic-printrboard-g2.cfg config file
|
2019-06-21 23:12:31 -04:00 |
|
generic-printrboard.cfg
|
config: Reduce the stepper current in the example printrboard config
|
2019-03-14 10:44:02 -04:00 |
|
generic-radds.cfg
|
config: Added encoder pins to radds example config
|
2019-01-02 17:46:06 -05:00 |
|
generic-rambo.cfg
|
config: Fix hd44780 typo in rambo and ramps example configs
|
2018-03-06 13:15:09 -05:00 |
|
generic-ramps.cfg
|
config: pin mapping for ender 3 stock display and encoder on ramps (#1075)
|
2019-01-06 11:51:27 -05:00 |
|
generic-re-arm.cfg
|
config: Clarify which boards use lpc1768 vs lpc1769 when known
|
2019-06-20 11:23:30 -04:00 |
|
generic-replicape.cfg
|
replicape: add support for Linux hardware PWM (#1443)
|
2019-04-06 13:51:51 -04:00 |
|
generic-rumba.cfg
|
config: Update extra extruder pins in generic-rumba.cfg
|
2019-03-14 11:48:25 -04:00 |
|
generic-smoothieboard.cfg
|
lpc176x: Add support for flashing via "make flash"
|
2019-03-08 22:22:41 -05:00 |
|
kit-voron2-250mm.cfg
|
probe: Move multi-sampling capability from ProbePointsHelper to Probe
|
2019-06-06 10:08:58 -04:00 |
|
kit-zav3d-2019.cfg
|
probe: Move multi-sampling capability from ProbePointsHelper to Probe
|
2019-06-06 10:08:58 -04:00 |
|
printer-adimlab-2018.cfg
|
config: ADIMlab Add support for LCD knob and caselight
|
2018-10-19 11:10:32 -04:00 |
|
printer-anet-a8-2017.cfg
|
config: Add button support for anet a8
|
2019-04-19 10:43:22 -04:00 |
|
printer-anet-e10-2018.cfg
|
config: anet e10 update
|
2018-06-19 11:36:52 -04:00 |
|
printer-anycubic-4max-2018.cfg
|
config: Added Anycubic 4Max printer config file
|
2019-03-22 13:02:01 -04:00 |
|
printer-anycubic-i3-mega-2017.cfg
|
config: Add a "printer-" prefix to example printer config files
|
2018-02-11 14:58:48 -05:00 |
|
printer-anycubic-kossel-2016.cfg
|
config: Make the Anycubic delta configurations as similar as possible
|
2018-11-25 17:14:16 -05:00 |
|
printer-anycubic-kossel-plus-2017.cfg
|
config: Make the Anycubic delta configurations as similar as possible
|
2018-11-25 17:14:16 -05:00 |
|
printer-creality-cr10-2017.cfg
|
config: Use "ATC Semitec 104GT-2" for CR10 (and similar) heater beds
|
2019-02-08 12:20:16 -05:00 |
|
printer-creality-cr10mini-2017.cfg
|
config: Use "ATC Semitec 104GT-2" for CR10 (and similar) heater beds
|
2019-02-08 12:20:16 -05:00 |
|
printer-creality-cr10s-2017.cfg
|
config: Use "ATC Semitec 104GT-2" for CR10 (and similar) heater beds
|
2019-02-08 12:20:16 -05:00 |
|
printer-creality-cr20-2018.cfg
|
config: Fix CR-20 click pin polarity
|
2018-12-15 18:38:03 -05:00 |
|
printer-creality-ender2-2017.cfg
|
config: Use consistent advice on flashing the Melzi board
|
2018-11-13 14:32:52 -05:00 |
|
printer-creality-ender3-2018.cfg
|
config: Update printer-creality-ender3-2018.cfg (#959)
|
2018-12-05 16:43:14 -05:00 |
|
printer-creality-ender5-2019.cfg
|
config: Add Creality Ender 5 2019
|
2019-05-01 15:25:42 -04:00 |
|
printer-lulzbot-taz6-2017.cfg
|
display: Add initial support for LCD screens attached to an MCU
|
2018-03-06 11:30:46 -05:00 |
|
printer-makergear-m2-2012.cfg
|
endstop_phase: Move endstop phase homing code to new "extras" module
|
2018-10-16 13:09:23 -04:00 |
|
printer-micromake-d1-2016.cfg
|
config: Add printer-micromake-d1-2016.cfg example config file
|
2018-12-18 20:59:43 -05:00 |
|
printer-seemecnc-rostock-max-v2-2015.cfg
|
config: Add a "printer-" prefix to example printer config files
|
2018-02-11 14:58:48 -05:00 |
|
printer-tevo-flash-2018.cfg
|
probe: Move multi-sampling capability from ProbePointsHelper to Probe
|
2019-06-06 10:08:58 -04:00 |
|
printer-tronxy-x5s-2018.cfg
|
config: Add buttons to printer-tronxy-x5s-2018.cfg
|
2019-03-01 00:09:30 -05:00 |
|
printer-tronxy-x8-2018.cfg
|
Add Printer Configuration File for the Tronxy X8
|
2018-07-10 11:59:07 -04:00 |
|
printer-velleman-k8200-2013.cfg
|
config: Add printer-velleman-k8200-2013.cfg example config
|
2018-11-13 10:46:57 -05:00 |
|
printer-wanhao-duplicator-6-2016.cfg
|
config: Wanhao Duplicator 6 likely does not need "restart: command"
|
2018-09-25 14:29:05 -04:00 |
|
printer-wanhao-duplicator-i3-plus-2017.cfg
|
config: Use .0025 as the default z step_distance in sample configs
|
2018-02-25 16:00:55 -05:00 |
|
printer-wanhao-duplicator-i3-plus-mark2-2019.cfg
|
config: Create printer-wanhao-duplicator-i3-plus-mark2-2019.cfg
|
2019-06-18 10:13:41 -04:00 |
|
printer-wanhao-duplicator-i3-v2.1-2017.cfg
|
config: Use consistent advice on flashing the Melzi board
|
2018-11-13 14:32:52 -05:00 |
|
sample-macros.cfg
|
config: Update M600 in sample-macros.cfg to use SAVE_GCODE_STATE
|
2019-05-31 10:29:09 -04:00 |
|
sample-probe-as-z-endstop.cfg
|
config: Fix G90 use in sample-probe-as-z-endstop.cfg
|
2019-06-07 10:37:10 -04:00 |
e18dddd1ab