mirror of https://github.com/Desuuuu/klipper.git
182 lines
8.5 KiB
Python
182 lines
8.5 KiB
Python
# TMC2130 configuration
|
|
#
|
|
# Copyright (C) 2018 Kevin O'Connor <kevin@koconnor.net>
|
|
#
|
|
# This file may be distributed under the terms of the GNU GPLv3 license.
|
|
import math, logging
|
|
|
|
TMC_FREQUENCY=13200000.
|
|
REG_GCONF=0x00
|
|
GCONF_EN_PWM_MODE=1<<2
|
|
GCONF_DIAG1_STALL=1<<8
|
|
REG_TCOOLTHRS=0x14
|
|
REG_COOLCONF=0x6d
|
|
REG_PWMCONF=0x70
|
|
|
|
ReadRegisters = {
|
|
0x00: "GCONF", 0x01: "GSTAT", 0x04: "IOIN", 0x12: "TSTEP", 0x2d: "XDIRECT",
|
|
0x6a: "MSCNT", 0x6b: "MSCURACT", 0x6c: "CHOPCONF", 0x6f: "DRV_STATUS",
|
|
0x71: "PWM_SCALE", 0x73: "LOST_STEPS"
|
|
}
|
|
|
|
class TMC2130:
|
|
def __init__(self, config):
|
|
self.printer = config.get_printer()
|
|
self.name = config.get_name().split()[1]
|
|
# pin setup
|
|
ppins = self.printer.lookup_object("pins")
|
|
cs_pin = config.get('cs_pin')
|
|
cs_pin_params = ppins.lookup_pin('digital_out', cs_pin)
|
|
if cs_pin_params['invert']:
|
|
raise pins.error("tmc2130 can not invert pin")
|
|
self.mcu = cs_pin_params['chip']
|
|
pin = cs_pin_params['pin']
|
|
self.oid = self.mcu.create_oid()
|
|
# Add DUMP_TMC command
|
|
gcode = self.printer.lookup_object("gcode")
|
|
gcode.register_mux_command(
|
|
"DUMP_TMC", "STEPPER", self.name,
|
|
self.cmd_DUMP_TMC, desc=self.cmd_DUMP_TMC_help)
|
|
# Setup driver registers
|
|
self.mcu.add_config_cmd(
|
|
"config_spi oid=%d bus=%d pin=%s mode=%d rate=%d shutdown_msg=" % (
|
|
self.oid, 0, cs_pin_params['pin'], 3, 4000000))
|
|
run_current = config.getfloat('run_current', above=0., maxval=2.)
|
|
hold_current = config.getfloat('hold_current', run_current,
|
|
above=0., maxval=2.)
|
|
sense_resistor = config.getfloat('sense_resistor', 0.110, above=0.)
|
|
steps = {'256': 0, '128': 1, '64': 2, '32': 3, '16': 4,
|
|
'8': 5, '4': 6, '2': 7, '1': 8}
|
|
self.mres = config.getchoice('microsteps', steps)
|
|
interpolate = config.getboolean('interpolate', True)
|
|
sc_velocity = config.getfloat('stealthchop_threshold', 0., minval=0.)
|
|
sc_threshold = self.velocity_to_clock(config, sc_velocity)
|
|
iholddelay = config.getint('driver_IHOLDDELAY', 8, minval=0, maxval=15)
|
|
tpowerdown = config.getint('driver_TPOWERDOWN', 0, minval=0, maxval=255)
|
|
blank_time_select = config.getint('driver_BLANK_TIME_SELECT', 1,
|
|
minval=0, maxval=3)
|
|
toff = config.getint('driver_TOFF', 4, minval=1, maxval=15)
|
|
hend = config.getint('driver_HEND', 7, minval=0, maxval=15)
|
|
hstrt = config.getint('driver_HSTRT', 0, minval=0, maxval=7)
|
|
sgt = config.getint('driver_SGT', 0, minval=-64, maxval=63) & 0x7f
|
|
pwm_scale = config.getboolean('driver_PWM_AUTOSCALE', True)
|
|
pwm_freq = config.getint('driver_PWM_FREQ', 1, minval=0, maxval=3)
|
|
pwm_grad = config.getint('driver_PWM_GRAD', 4, minval=0, maxval=255)
|
|
pwm_ampl = config.getint('driver_PWM_AMPL', 128, minval=0, maxval=255)
|
|
# Allow virtual endstop to be created
|
|
self.diag1_pin = config.get('diag1_pin', None)
|
|
ppins.register_chip("tmc2130_" + self.name, self)
|
|
self.spi_send_cmd = self.spi_transfer_cmd = None
|
|
self.mcu.add_config_object(self)
|
|
# calculate current
|
|
vsense = False
|
|
irun = self.current_bits(run_current, sense_resistor, vsense)
|
|
ihold = self.current_bits(hold_current, sense_resistor, vsense)
|
|
if irun < 16 and ihold < 16:
|
|
vsense = True
|
|
irun = self.current_bits(run_current, sense_resistor, vsense)
|
|
ihold = self.current_bits(hold_current, sense_resistor, vsense)
|
|
# configure GCONF
|
|
self.reg_GCONF = (sc_velocity > 0.) << 2
|
|
self.add_config_cmd(REG_GCONF, self.reg_GCONF)
|
|
# configure CHOPCONF
|
|
self.add_config_cmd(
|
|
0x6c, toff | (hstrt << 4) | (hend << 7) | (blank_time_select << 15)
|
|
| (vsense << 17) | (self.mres << 24) | (interpolate << 28))
|
|
# configure IHOLD_IRUN
|
|
self.add_config_cmd(0x10, ihold | (irun << 8) | (iholddelay << 16))
|
|
# configure TPOWERDOWN
|
|
self.add_config_cmd(0x11, tpowerdown)
|
|
# configure TPWMTHRS
|
|
self.add_config_cmd(0x13, max(0, min(0xfffff, sc_threshold)))
|
|
# configure COOLCONF
|
|
self.add_config_cmd(REG_COOLCONF, sgt << 16)
|
|
# configure PWMCONF
|
|
self.add_config_cmd(REG_PWMCONF, pwm_ampl | (pwm_grad << 8)
|
|
| (pwm_freq << 16) | (pwm_scale << 18))
|
|
def add_config_cmd(self, addr, val):
|
|
self.mcu.add_config_cmd("spi_send oid=%d data=%02x%08x" % (
|
|
self.oid, (addr | 0x80) & 0xff, val & 0xffffffff), is_init=True)
|
|
def current_bits(self, current, sense_resistor, vsense_on):
|
|
sense_resistor += 0.020
|
|
vsense = 0.32
|
|
if vsense_on:
|
|
vsense = 0.18
|
|
cs = int(32. * current * sense_resistor * math.sqrt(2.) / vsense
|
|
- 1. + .5)
|
|
return max(0, min(31, cs))
|
|
def velocity_to_clock(self, config, velocity):
|
|
if not velocity:
|
|
return 0
|
|
stepper_name = config.get_name().split()[1]
|
|
stepper_config = config.getsection(stepper_name)
|
|
step_dist = stepper_config.getfloat('step_distance')
|
|
step_dist_256 = step_dist / (1 << self.mres)
|
|
return int(TMC_FREQUENCY * step_dist_256 / velocity + .5)
|
|
def setup_pin(self, pin_params):
|
|
if (pin_params['pin'] != 'virtual_endstop'
|
|
or pin_params['type'] != 'endstop'):
|
|
raise pins.error("tmc2130 virtual endstop only useful as endstop")
|
|
if pin_params['invert'] or pin_params['pullup']:
|
|
raise pins.error("Can not pullup/invert tmc2130 virtual endstop")
|
|
return TMC2130VirtualEndstop(self)
|
|
def build_config(self):
|
|
cmd_queue = self.mcu.alloc_command_queue()
|
|
self.spi_send_cmd = self.mcu.lookup_command(
|
|
"spi_send oid=%c data=%*s", cq=cmd_queue)
|
|
self.spi_transfer_cmd = self.mcu.lookup_command(
|
|
"spi_transfer oid=%c data=%*s", cq=cmd_queue)
|
|
def set_register(self, addr, val):
|
|
data = [(addr | 0x80) & 0xff, (val >> 24) & 0xff, (val >> 16) & 0xff,
|
|
(val >> 8) & 0xff, val & 0xff]
|
|
self.spi_send_cmd.send([self.oid, data])
|
|
cmd_DUMP_TMC_help = "Read and display TMC2130 registers"
|
|
def cmd_DUMP_TMC(self, params):
|
|
self.printer.lookup_object('toolhead').get_last_move_time()
|
|
gcode = self.printer.lookup_object('gcode')
|
|
logging.info("DUMP_TMC2130 %s", self.name)
|
|
for reg, name in sorted(ReadRegisters.items()):
|
|
self.spi_send_cmd.send([self.oid, [reg, 0x00, 0x00, 0x00, 0x00]])
|
|
params = self.spi_transfer_cmd.send_with_response(
|
|
[self.oid, [reg, 0x00, 0x00, 0x00, 0x00]],
|
|
'spi_transfer_response', self.oid)
|
|
pr = bytearray(params['response'])
|
|
val = (pr[1] << 24) | (pr[2] << 16) | (pr[3] << 8) | pr[4]
|
|
msg = "%15s: %8x" % (name, val)
|
|
logging.info(msg)
|
|
gcode.respond_info(msg)
|
|
|
|
# Endstop wrapper that enables tmc2130 "sensorless homing"
|
|
class TMC2130VirtualEndstop:
|
|
def __init__(self, tmc2130):
|
|
self.tmc2130 = tmc2130
|
|
if tmc2130.diag1_pin is None:
|
|
raise pins.error("tmc2130 virtual endstop requires diag1_pin")
|
|
ppins = tmc2130.printer.lookup_object('pins')
|
|
self.mcu_endstop = ppins.setup_pin('endstop', tmc2130.diag1_pin)
|
|
if self.mcu_endstop.get_mcu() is not tmc2130.mcu:
|
|
raise pins.error("tmc2130 virtual endstop must be on same mcu")
|
|
# Wrappers
|
|
self.get_mcu = self.mcu_endstop.get_mcu
|
|
self.add_stepper = self.mcu_endstop.add_stepper
|
|
self.get_steppers = self.mcu_endstop.get_steppers
|
|
self.home_start = self.mcu_endstop.home_start
|
|
self.home_wait = self.mcu_endstop.home_wait
|
|
self.query_endstop = self.mcu_endstop.query_endstop
|
|
self.query_endstop_wait = self.mcu_endstop.query_endstop_wait
|
|
self.TimeoutError = self.mcu_endstop.TimeoutError
|
|
def home_prepare(self):
|
|
gconf = self.tmc2130.reg_GCONF
|
|
gconf &= ~GCONF_EN_PWM_MODE
|
|
gconf |= GCONF_DIAG1_STALL
|
|
self.tmc2130.set_register(REG_GCONF, gconf)
|
|
self.tmc2130.set_register(REG_TCOOLTHRS, 0xfffff)
|
|
self.mcu_endstop.home_prepare()
|
|
def home_finalize(self):
|
|
self.tmc2130.set_register(REG_GCONF, self.tmc2130.reg_GCONF)
|
|
self.tmc2130.set_register(REG_TCOOLTHRS, 0)
|
|
self.mcu_endstop.home_finalize()
|
|
|
|
def load_config_prefix(config):
|
|
return TMC2130(config)
|