mirror of https://github.com/Desuuuu/klipper.git
76 lines
2.5 KiB
C
76 lines
2.5 KiB
C
// Commands for sending messages on an I2C bus
|
|
//
|
|
// Copyright (C) 2018 Florian Heilmann <Florian.Heilmann@gmx.net>
|
|
//
|
|
// This file may be distributed under the terms of the GNU GPLv3 license.
|
|
|
|
#include <string.h> // memcpy
|
|
#include "basecmd.h" //oid_alloc
|
|
#include "command.h" //sendf
|
|
#include "sched.h" //DECL_COMMAND
|
|
#include "board/gpio.h" //i2c_write/read/setup
|
|
|
|
struct i2cdev_s {
|
|
struct i2c_config i2c_config;
|
|
};
|
|
|
|
void
|
|
command_config_i2c(uint32_t *args)
|
|
{
|
|
uint8_t addr = args[3] & 0x7f;
|
|
struct i2cdev_s *i2c = oid_alloc(args[0], command_config_i2c
|
|
, sizeof(*i2c));
|
|
i2c->i2c_config = i2c_setup(args[1], args[2], addr);
|
|
}
|
|
DECL_COMMAND(command_config_i2c,
|
|
"config_i2c oid=%c i2c_bus=%u rate=%u address=%u");
|
|
|
|
void
|
|
command_i2c_write(uint32_t *args)
|
|
{
|
|
uint8_t oid = args[0];
|
|
struct i2cdev_s *i2c = oid_lookup(oid, command_config_i2c);
|
|
uint8_t data_len = args[1];
|
|
uint8_t *data = command_decode_ptr(args[2]);
|
|
i2c_write(i2c->i2c_config, data_len, data);
|
|
}
|
|
DECL_COMMAND(command_i2c_write, "i2c_write oid=%c data=%*s");
|
|
|
|
void
|
|
command_i2c_read(uint32_t * args)
|
|
{
|
|
uint8_t oid = args[0];
|
|
struct i2cdev_s *i2c = oid_lookup(oid, command_config_i2c);
|
|
uint8_t reg_len = args[1];
|
|
uint8_t *reg = command_decode_ptr(args[2]);
|
|
uint8_t data_len = args[3];
|
|
uint8_t data[data_len];
|
|
i2c_read(i2c->i2c_config, reg_len, reg, data_len, data);
|
|
sendf("i2c_read_response oid=%c response=%*s", oid, data_len, data);
|
|
}
|
|
DECL_COMMAND(command_i2c_read, "i2c_read oid=%c reg=%*s read_len=%u");
|
|
|
|
void
|
|
command_i2c_modify_bits(uint32_t *args)
|
|
{
|
|
uint8_t oid = args[0];
|
|
struct i2cdev_s *i2c = oid_lookup(oid, command_config_i2c);
|
|
uint8_t reg_len = args[1];
|
|
uint8_t *reg = command_decode_ptr(args[2]);
|
|
uint32_t clear_set_len = args[3];
|
|
if (clear_set_len % 2 != 0)
|
|
shutdown("i2c_modify_bits: Odd number of bits!");
|
|
uint8_t data_len = clear_set_len/2;
|
|
uint8_t *clear_set = command_decode_ptr(args[4]);
|
|
uint8_t receive_data[reg_len + data_len];
|
|
memcpy(receive_data, reg, reg_len);
|
|
i2c_read(i2c->i2c_config, reg_len, reg, data_len, receive_data + reg_len);
|
|
for (int i = 0; i < data_len; i++) {
|
|
receive_data[reg_len + i] &= ~clear_set[i];
|
|
receive_data[reg_len + i] |= clear_set[data_len + i];
|
|
}
|
|
i2c_write(i2c->i2c_config, reg_len + data_len, receive_data);
|
|
}
|
|
DECL_COMMAND(command_i2c_modify_bits,
|
|
"i2c_modify_bits oid=%c reg=%*s clear_set_bits=%*s");
|