mirror of https://github.com/Desuuuu/klipper.git
121 lines
11 KiB
C
121 lines
11 KiB
C
/* ---------------------------------------------------------------------------- */
|
|
/* Atmel Microcontroller Software Support */
|
|
/* SAM Software Package License */
|
|
/* ---------------------------------------------------------------------------- */
|
|
/* Copyright (c) %copyright_year%, Atmel Corporation */
|
|
/* */
|
|
/* All rights reserved. */
|
|
/* */
|
|
/* Redistribution and use in source and binary forms, with or without */
|
|
/* modification, are permitted provided that the following condition is met: */
|
|
/* */
|
|
/* - Redistributions of source code must retain the above copyright notice, */
|
|
/* this list of conditions and the disclaimer below. */
|
|
/* */
|
|
/* Atmel's name may not be used to endorse or promote products derived from */
|
|
/* this software without specific prior written permission. */
|
|
/* */
|
|
/* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR */
|
|
/* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF */
|
|
/* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE */
|
|
/* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, */
|
|
/* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT */
|
|
/* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, */
|
|
/* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF */
|
|
/* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING */
|
|
/* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */
|
|
/* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */
|
|
/* ---------------------------------------------------------------------------- */
|
|
|
|
#ifndef _SAM4S_TC0_INSTANCE_
|
|
#define _SAM4S_TC0_INSTANCE_
|
|
|
|
/* ========== Register definition for TC0 peripheral ========== */
|
|
#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
|
|
#define REG_TC0_CCR0 (0x40010000U) /**< \brief (TC0) Channel Control Register (channel = 0) */
|
|
#define REG_TC0_CMR0 (0x40010004U) /**< \brief (TC0) Channel Mode Register (channel = 0) */
|
|
#define REG_TC0_SMMR0 (0x40010008U) /**< \brief (TC0) Stepper Motor Mode Register (channel = 0) */
|
|
#define REG_TC0_CV0 (0x40010010U) /**< \brief (TC0) Counter Value (channel = 0) */
|
|
#define REG_TC0_RA0 (0x40010014U) /**< \brief (TC0) Register A (channel = 0) */
|
|
#define REG_TC0_RB0 (0x40010018U) /**< \brief (TC0) Register B (channel = 0) */
|
|
#define REG_TC0_RC0 (0x4001001CU) /**< \brief (TC0) Register C (channel = 0) */
|
|
#define REG_TC0_SR0 (0x40010020U) /**< \brief (TC0) Status Register (channel = 0) */
|
|
#define REG_TC0_IER0 (0x40010024U) /**< \brief (TC0) Interrupt Enable Register (channel = 0) */
|
|
#define REG_TC0_IDR0 (0x40010028U) /**< \brief (TC0) Interrupt Disable Register (channel = 0) */
|
|
#define REG_TC0_IMR0 (0x4001002CU) /**< \brief (TC0) Interrupt Mask Register (channel = 0) */
|
|
#define REG_TC0_CCR1 (0x40010040U) /**< \brief (TC0) Channel Control Register (channel = 1) */
|
|
#define REG_TC0_CMR1 (0x40010044U) /**< \brief (TC0) Channel Mode Register (channel = 1) */
|
|
#define REG_TC0_SMMR1 (0x40010048U) /**< \brief (TC0) Stepper Motor Mode Register (channel = 1) */
|
|
#define REG_TC0_CV1 (0x40010050U) /**< \brief (TC0) Counter Value (channel = 1) */
|
|
#define REG_TC0_RA1 (0x40010054U) /**< \brief (TC0) Register A (channel = 1) */
|
|
#define REG_TC0_RB1 (0x40010058U) /**< \brief (TC0) Register B (channel = 1) */
|
|
#define REG_TC0_RC1 (0x4001005CU) /**< \brief (TC0) Register C (channel = 1) */
|
|
#define REG_TC0_SR1 (0x40010060U) /**< \brief (TC0) Status Register (channel = 1) */
|
|
#define REG_TC0_IER1 (0x40010064U) /**< \brief (TC0) Interrupt Enable Register (channel = 1) */
|
|
#define REG_TC0_IDR1 (0x40010068U) /**< \brief (TC0) Interrupt Disable Register (channel = 1) */
|
|
#define REG_TC0_IMR1 (0x4001006CU) /**< \brief (TC0) Interrupt Mask Register (channel = 1) */
|
|
#define REG_TC0_CCR2 (0x40010080U) /**< \brief (TC0) Channel Control Register (channel = 2) */
|
|
#define REG_TC0_CMR2 (0x40010084U) /**< \brief (TC0) Channel Mode Register (channel = 2) */
|
|
#define REG_TC0_SMMR2 (0x40010088U) /**< \brief (TC0) Stepper Motor Mode Register (channel = 2) */
|
|
#define REG_TC0_CV2 (0x40010090U) /**< \brief (TC0) Counter Value (channel = 2) */
|
|
#define REG_TC0_RA2 (0x40010094U) /**< \brief (TC0) Register A (channel = 2) */
|
|
#define REG_TC0_RB2 (0x40010098U) /**< \brief (TC0) Register B (channel = 2) */
|
|
#define REG_TC0_RC2 (0x4001009CU) /**< \brief (TC0) Register C (channel = 2) */
|
|
#define REG_TC0_SR2 (0x400100A0U) /**< \brief (TC0) Status Register (channel = 2) */
|
|
#define REG_TC0_IER2 (0x400100A4U) /**< \brief (TC0) Interrupt Enable Register (channel = 2) */
|
|
#define REG_TC0_IDR2 (0x400100A8U) /**< \brief (TC0) Interrupt Disable Register (channel = 2) */
|
|
#define REG_TC0_IMR2 (0x400100ACU) /**< \brief (TC0) Interrupt Mask Register (channel = 2) */
|
|
#define REG_TC0_BCR (0x400100C0U) /**< \brief (TC0) Block Control Register */
|
|
#define REG_TC0_BMR (0x400100C4U) /**< \brief (TC0) Block Mode Register */
|
|
#define REG_TC0_QIER (0x400100C8U) /**< \brief (TC0) QDEC Interrupt Enable Register */
|
|
#define REG_TC0_QIDR (0x400100CCU) /**< \brief (TC0) QDEC Interrupt Disable Register */
|
|
#define REG_TC0_QIMR (0x400100D0U) /**< \brief (TC0) QDEC Interrupt Mask Register */
|
|
#define REG_TC0_QISR (0x400100D4U) /**< \brief (TC0) QDEC Interrupt Status Register */
|
|
#define REG_TC0_FMR (0x400100D8U) /**< \brief (TC0) Fault Mode Register */
|
|
#define REG_TC0_WPMR (0x400100E4U) /**< \brief (TC0) Write Protection Mode Register */
|
|
#else
|
|
#define REG_TC0_CCR0 (*(__O uint32_t*)0x40010000U) /**< \brief (TC0) Channel Control Register (channel = 0) */
|
|
#define REG_TC0_CMR0 (*(__IO uint32_t*)0x40010004U) /**< \brief (TC0) Channel Mode Register (channel = 0) */
|
|
#define REG_TC0_SMMR0 (*(__IO uint32_t*)0x40010008U) /**< \brief (TC0) Stepper Motor Mode Register (channel = 0) */
|
|
#define REG_TC0_CV0 (*(__I uint32_t*)0x40010010U) /**< \brief (TC0) Counter Value (channel = 0) */
|
|
#define REG_TC0_RA0 (*(__IO uint32_t*)0x40010014U) /**< \brief (TC0) Register A (channel = 0) */
|
|
#define REG_TC0_RB0 (*(__IO uint32_t*)0x40010018U) /**< \brief (TC0) Register B (channel = 0) */
|
|
#define REG_TC0_RC0 (*(__IO uint32_t*)0x4001001CU) /**< \brief (TC0) Register C (channel = 0) */
|
|
#define REG_TC0_SR0 (*(__I uint32_t*)0x40010020U) /**< \brief (TC0) Status Register (channel = 0) */
|
|
#define REG_TC0_IER0 (*(__O uint32_t*)0x40010024U) /**< \brief (TC0) Interrupt Enable Register (channel = 0) */
|
|
#define REG_TC0_IDR0 (*(__O uint32_t*)0x40010028U) /**< \brief (TC0) Interrupt Disable Register (channel = 0) */
|
|
#define REG_TC0_IMR0 (*(__I uint32_t*)0x4001002CU) /**< \brief (TC0) Interrupt Mask Register (channel = 0) */
|
|
#define REG_TC0_CCR1 (*(__O uint32_t*)0x40010040U) /**< \brief (TC0) Channel Control Register (channel = 1) */
|
|
#define REG_TC0_CMR1 (*(__IO uint32_t*)0x40010044U) /**< \brief (TC0) Channel Mode Register (channel = 1) */
|
|
#define REG_TC0_SMMR1 (*(__IO uint32_t*)0x40010048U) /**< \brief (TC0) Stepper Motor Mode Register (channel = 1) */
|
|
#define REG_TC0_CV1 (*(__I uint32_t*)0x40010050U) /**< \brief (TC0) Counter Value (channel = 1) */
|
|
#define REG_TC0_RA1 (*(__IO uint32_t*)0x40010054U) /**< \brief (TC0) Register A (channel = 1) */
|
|
#define REG_TC0_RB1 (*(__IO uint32_t*)0x40010058U) /**< \brief (TC0) Register B (channel = 1) */
|
|
#define REG_TC0_RC1 (*(__IO uint32_t*)0x4001005CU) /**< \brief (TC0) Register C (channel = 1) */
|
|
#define REG_TC0_SR1 (*(__I uint32_t*)0x40010060U) /**< \brief (TC0) Status Register (channel = 1) */
|
|
#define REG_TC0_IER1 (*(__O uint32_t*)0x40010064U) /**< \brief (TC0) Interrupt Enable Register (channel = 1) */
|
|
#define REG_TC0_IDR1 (*(__O uint32_t*)0x40010068U) /**< \brief (TC0) Interrupt Disable Register (channel = 1) */
|
|
#define REG_TC0_IMR1 (*(__I uint32_t*)0x4001006CU) /**< \brief (TC0) Interrupt Mask Register (channel = 1) */
|
|
#define REG_TC0_CCR2 (*(__O uint32_t*)0x40010080U) /**< \brief (TC0) Channel Control Register (channel = 2) */
|
|
#define REG_TC0_CMR2 (*(__IO uint32_t*)0x40010084U) /**< \brief (TC0) Channel Mode Register (channel = 2) */
|
|
#define REG_TC0_SMMR2 (*(__IO uint32_t*)0x40010088U) /**< \brief (TC0) Stepper Motor Mode Register (channel = 2) */
|
|
#define REG_TC0_CV2 (*(__I uint32_t*)0x40010090U) /**< \brief (TC0) Counter Value (channel = 2) */
|
|
#define REG_TC0_RA2 (*(__IO uint32_t*)0x40010094U) /**< \brief (TC0) Register A (channel = 2) */
|
|
#define REG_TC0_RB2 (*(__IO uint32_t*)0x40010098U) /**< \brief (TC0) Register B (channel = 2) */
|
|
#define REG_TC0_RC2 (*(__IO uint32_t*)0x4001009CU) /**< \brief (TC0) Register C (channel = 2) */
|
|
#define REG_TC0_SR2 (*(__I uint32_t*)0x400100A0U) /**< \brief (TC0) Status Register (channel = 2) */
|
|
#define REG_TC0_IER2 (*(__O uint32_t*)0x400100A4U) /**< \brief (TC0) Interrupt Enable Register (channel = 2) */
|
|
#define REG_TC0_IDR2 (*(__O uint32_t*)0x400100A8U) /**< \brief (TC0) Interrupt Disable Register (channel = 2) */
|
|
#define REG_TC0_IMR2 (*(__I uint32_t*)0x400100ACU) /**< \brief (TC0) Interrupt Mask Register (channel = 2) */
|
|
#define REG_TC0_BCR (*(__O uint32_t*)0x400100C0U) /**< \brief (TC0) Block Control Register */
|
|
#define REG_TC0_BMR (*(__IO uint32_t*)0x400100C4U) /**< \brief (TC0) Block Mode Register */
|
|
#define REG_TC0_QIER (*(__O uint32_t*)0x400100C8U) /**< \brief (TC0) QDEC Interrupt Enable Register */
|
|
#define REG_TC0_QIDR (*(__O uint32_t*)0x400100CCU) /**< \brief (TC0) QDEC Interrupt Disable Register */
|
|
#define REG_TC0_QIMR (*(__I uint32_t*)0x400100D0U) /**< \brief (TC0) QDEC Interrupt Mask Register */
|
|
#define REG_TC0_QISR (*(__I uint32_t*)0x400100D4U) /**< \brief (TC0) QDEC Interrupt Status Register */
|
|
#define REG_TC0_FMR (*(__IO uint32_t*)0x400100D8U) /**< \brief (TC0) Fault Mode Register */
|
|
#define REG_TC0_WPMR (*(__IO uint32_t*)0x400100E4U) /**< \brief (TC0) Write Protection Mode Register */
|
|
#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
|
|
|
|
#endif /* _SAM4S_TC0_INSTANCE_ */
|