mirror of https://github.com/Desuuuu/klipper.git
132 lines
5.8 KiB
Python
132 lines
5.8 KiB
Python
# Support for filament width sensor
|
|
#
|
|
# Copyright (C) 2019 Mustafa YILDIZ <mydiz@hotmail.com>
|
|
#
|
|
# This file may be distributed under the terms of the GNU GPLv3 license.
|
|
|
|
ADC_REPORT_TIME = 0.500
|
|
ADC_SAMPLE_TIME = 0.001
|
|
ADC_SAMPLE_COUNT = 8
|
|
MEASUREMENT_INTERVAL_MM = 10
|
|
|
|
class FilamentWidthSensor:
|
|
def __init__(self, config):
|
|
self.printer = config.get_printer()
|
|
self.reactor = self.printer.get_reactor()
|
|
self.pin = config.get('pin')
|
|
self.nominal_filament_dia = config.getfloat('default_nominal_filament_diameter', above=1.0)
|
|
self.measurement_delay = config.getfloat('measurement_delay', above=0.)
|
|
self.measurement_max_difference = config.getfloat('max_difference', above=0.)
|
|
self.max_diameter = self.nominal_filament_dia + self.measurement_max_difference
|
|
self.min_diameter = self.nominal_filament_dia - self.measurement_max_difference
|
|
self.is_active = True
|
|
# filament array [position, filamentWidth]
|
|
self.filament_array = []
|
|
self.lastFilamentWidthReading = 0
|
|
# printer objects
|
|
self.toolhead = self.ppins = self.mcu_adc = None
|
|
self.printer.register_event_handler("klippy:ready", self.handle_ready)
|
|
# Start adc
|
|
self.ppins = self.printer.lookup_object('pins')
|
|
self.mcu_adc = self.ppins.setup_pin('adc', self.pin)
|
|
self.mcu_adc.setup_minmax(ADC_SAMPLE_TIME, ADC_SAMPLE_COUNT)
|
|
self.mcu_adc.setup_adc_callback(ADC_REPORT_TIME, self.adc_callback)
|
|
# extrude factor updating
|
|
self.extrude_factor_update_timer = self.reactor.register_timer(
|
|
self.extrude_factor_update_event)
|
|
# Register commands
|
|
self.gcode = self.printer.lookup_object('gcode')
|
|
self.gcode.register_command('QUERY_FILAMENT_WIDTH', self.cmd_M407)
|
|
self.gcode.register_command('RESET_FILAMENT_WIDTH_SENSOR', self.cmd_ClearFilamentArray)
|
|
self.gcode.register_command('DISABLE_FILAMENT_WIDTH_SENSOR', self.cmd_M406)
|
|
self.gcode.register_command('ENABLE_FILAMENT_WIDTH_SENSOR', self.cmd_M405)
|
|
|
|
# Initialization
|
|
def handle_ready(self):
|
|
# Load printer objects
|
|
self.toolhead = self.printer.lookup_object('toolhead')
|
|
|
|
# Start extrude factor update timer
|
|
self.reactor.update_timer(self.extrude_factor_update_timer, self.reactor.NOW)
|
|
|
|
def adc_callback(self, read_time, read_value):
|
|
# read sensor value
|
|
self.lastFilamentWidthReading = round(read_value * 5, 2)
|
|
|
|
def update_filament_array(self, last_epos):
|
|
# Fill array
|
|
if len(self.filament_array) > 0:
|
|
# Get last reading position in array & calculate next reading position
|
|
next_reading_position = self.filament_array[-1][0] + MEASUREMENT_INTERVAL_MM
|
|
if next_reading_position <= (last_epos + self.measurement_delay):
|
|
self.filament_array.append([last_epos + self.measurement_delay, self.lastFilamentWidthReading])
|
|
else:
|
|
# add first item to array
|
|
self.filament_array.append([self.measurement_delay + last_epos, self.lastFilamentWidthReading])
|
|
|
|
def extrude_factor_update_event(self, eventtime):
|
|
# Update extrude factor
|
|
pos = self.toolhead.get_position()
|
|
last_epos = pos[3]
|
|
# Update filament array for lastFilamentWidthReading
|
|
self.update_filament_array(last_epos)
|
|
# Does filament exists
|
|
if self.lastFilamentWidthReading > 0.5:
|
|
if len(self.filament_array) > 0:
|
|
# Get first position in filament array
|
|
pending_position = self.filament_array[0][0]
|
|
if pending_position <= last_epos:
|
|
# Get first item in filament_array queue
|
|
item = self.filament_array.pop(0)
|
|
filament_width = item[1]
|
|
if (filament_width <= self.max_diameter) and (filament_width >= self.min_diameter):
|
|
percentage = round(self.nominal_filament_dia / filament_width * 100)
|
|
self.gcode.run_script("M221 S" + str(percentage))
|
|
else:
|
|
self.gcode.run_script("M221 S100")
|
|
else:
|
|
self.gcode.run_script("M221 S100")
|
|
self.filament_array = []
|
|
return eventtime + 1
|
|
|
|
def cmd_M407(self, params):
|
|
response = ""
|
|
if self.lastFilamentWidthReading > 0:
|
|
response += "Filament dia (measured mm): " + str(self.lastFilamentWidthReading)
|
|
else:
|
|
response += "Filament NOT present"
|
|
self.gcode.respond(response)
|
|
|
|
def cmd_ClearFilamentArray(self, params):
|
|
self.filament_array = []
|
|
self.gcode.respond("Filament width measurements cleared!")
|
|
# Set extrude multiplier to 100%
|
|
self.gcode.run_script_from_command("M221 S100")
|
|
|
|
def cmd_M405(self, params):
|
|
response = "Filament width sensor Turned On"
|
|
if self.is_active:
|
|
response = "Filament width sensor is already On"
|
|
else:
|
|
self.is_active = True
|
|
# Start extrude factor update timer
|
|
self.reactor.update_timer(self.extrude_factor_update_timer, self.reactor.NOW)
|
|
self.gcode.respond(response)
|
|
|
|
def cmd_M406(self, params):
|
|
response = "Filament width sensor Turned Off"
|
|
if not self.is_active:
|
|
response = "Filament width sensor is already Off"
|
|
else:
|
|
self.is_active = False
|
|
# Stop extrude factor update timer
|
|
self.reactor.update_timer(self.extrude_factor_update_timer, self.reactor.NEVER)
|
|
# Clear filament array
|
|
self.filament_array = []
|
|
# Set extrude multiplier to 100%
|
|
self.gcode.run_script_from_command("M221 S100")
|
|
self.gcode.respond(response)
|
|
|
|
def load_config(config):
|
|
return FilamentWidthSensor(config)
|