mirror of https://github.com/Desuuuu/klipper.git
291 lines
10 KiB
Python
291 lines
10 KiB
Python
# TMC2660 configuration
|
|
#
|
|
# Copyright (C) 2018-2019 Florian Heilmann <Florian.Heilmann@gmx.net>
|
|
# Copyright (C) 2019 Kevin O'Connor <kevin@koconnor.net>
|
|
#
|
|
# This file may be distributed under the terms of the GNU GPLv3 license.
|
|
import math, logging
|
|
from . import bus, tmc
|
|
|
|
Registers = {
|
|
"DRVCONF": 0xE, "SGCSCONF": 0xC, "SMARTEN": 0xA,
|
|
"CHOPCONF": 0x8, "DRVCTRL": 0x0
|
|
}
|
|
|
|
ReadRegisters = [ "READRSP@RDSEL0", "READRSP@RDSEL1", "READRSP@RDSEL2" ]
|
|
|
|
Fields = {}
|
|
|
|
Fields["DRVCTRL"] = {
|
|
"MRES": 0x0f,
|
|
"DEDGE": 0x01 << 8,
|
|
"intpol": 0x01 << 9,
|
|
}
|
|
|
|
Fields["CHOPCONF"] = {
|
|
"toff": 0x0f,
|
|
"HSTRT": 0x7 << 4,
|
|
"HEND": 0x0f << 7,
|
|
"HDEC": 0x03 << 11,
|
|
"RNDTF": 0x01 << 13,
|
|
"CHM": 0x01 << 14,
|
|
"TBL": 0x03 << 15
|
|
}
|
|
|
|
Fields["SMARTEN"] = {
|
|
"SEMIN" : 0x0f,
|
|
"SEUP": 0x03 << 5,
|
|
"SEMAX": 0x0f << 8,
|
|
"SEDN": 0x03 << 13,
|
|
"SEIMIN": 0x01 << 15
|
|
}
|
|
|
|
Fields["SGCSCONF"] = {
|
|
"CS": 0x1f,
|
|
"SGT": 0x7F << 8,
|
|
"SFILT": 0x01 << 16
|
|
}
|
|
|
|
Fields["DRVCONF"] = {
|
|
"RDSEL": 0x03 << 4,
|
|
"VSENSE": 0x01 << 6,
|
|
"SDOFF": 0x01 << 7,
|
|
"TS2G": 0x03 << 8,
|
|
"DISS2G": 0x01 << 10,
|
|
"SLPL": 0x03 << 12,
|
|
"SLPH": 0x03 << 14,
|
|
"TST": 0x01 << 16
|
|
}
|
|
|
|
Fields["READRSP@RDSEL0"] = {
|
|
"SG": 0x01,
|
|
"OT": 0x01 << 1,
|
|
"OTPW": 0x01 << 2,
|
|
"S2GA": 0x01 << 3,
|
|
"S2GB": 0x01 << 4,
|
|
"OLA": 0x01 << 5,
|
|
"OLB": 0x01 << 6,
|
|
"STST": 0x01 << 7,
|
|
"MSTEP": 0x3ff << 10
|
|
}
|
|
|
|
Fields["READRSP@RDSEL1"] = {
|
|
"SG": 0x01,
|
|
"OT": 0x01 << 1,
|
|
"OTPW": 0x01 << 2,
|
|
"S2GA": 0x01 << 3,
|
|
"S2GB": 0x01 << 4,
|
|
"OLA": 0x01 << 5,
|
|
"OLB": 0x01 << 6,
|
|
"STST": 0x01 << 7,
|
|
"SG@RDSEL1": 0x3ff << 10
|
|
}
|
|
|
|
Fields["READRSP@RDSEL2"] = {
|
|
"SG": 0x01,
|
|
"OT": 0x01 << 1,
|
|
"OTPW": 0x01 << 2,
|
|
"S2GA": 0x01 << 3,
|
|
"S2GB": 0x01 << 4,
|
|
"OLA": 0x01 << 5,
|
|
"OLB": 0x01 << 6,
|
|
"STST": 0x01 << 7,
|
|
"SG@RDSEL2": 0x1f << 15,
|
|
"SE": 0x1f << 10
|
|
}
|
|
|
|
SignedFields = ["SGT"]
|
|
|
|
FieldFormatters = {
|
|
"MRES": (lambda v: "%d(%dusteps)" % (v, 0x100 >> v)),
|
|
"DEDGE": (lambda v:
|
|
"1(Both Edges Active)" if v else "0(Only Rising Edge active)"),
|
|
"intpol": (lambda v: "1(On)" if v else "0(Off)"),
|
|
"toff": (lambda v: ("%d" % v) if v else "0(Driver Disabled!)"),
|
|
"CHM": (lambda v: "1(constant toff)" if v else "0(spreadCycle)"),
|
|
"SFILT": (lambda v: "1(Filtered mode)" if v else "0(Standard mode)"),
|
|
"VSENSE": (lambda v: "%d(%dmV)" % (v, 165 if v else 305)),
|
|
"SDOFF": (lambda v: "1(Step/Dir disabled" if v else "0(Step/dir enabled)"),
|
|
"DISS2G": (lambda v: "%d(Short to GND protection %s)" % (v,
|
|
"disabled" if v else "enabled")),
|
|
"MSTEP": (lambda v: "%d(%d, OA1 %s OA2)" % (v, v & 0xff,
|
|
"<=" if v & 0x100 else "=>")),
|
|
"SG": (lambda v: "%d(%s)" % (v, "Stall!" if v else "No Stall!")),
|
|
"OT": (lambda v: "1(Overtemp shutdown!)" if v else ""),
|
|
"OTPW": (lambda v: "1(Overtemp warning!)" if v else ""),
|
|
"S2GA": (lambda v: "1(Short to GND Coil A!)" if v else ""),
|
|
"S2GB": (lambda v: "1(Short to GND Coil B!)" if v else ""),
|
|
"OLA": (lambda v: "1(Open Load Coil A at slow speed!)" if v else ""),
|
|
"OLB": (lambda v: "1(Open Load Coil B at slow speed!)" if v else ""),
|
|
"STST": (lambda v: "1(Standstill detected!)" if v else ""),
|
|
}
|
|
|
|
|
|
######################################################################
|
|
# TMC stepper current config helper
|
|
######################################################################
|
|
|
|
MAX_CURRENT = 2.400
|
|
|
|
class TMC2660CurrentHelper:
|
|
def __init__(self, config, mcu_tmc):
|
|
self.printer = config.get_printer()
|
|
self.name = config.get_name().split()[-1]
|
|
self.mcu_tmc = mcu_tmc
|
|
self.fields = mcu_tmc.get_fields()
|
|
self.current = config.getfloat('run_current', minval=0.1,
|
|
maxval=MAX_CURRENT)
|
|
self.sense_resistor = config.getfloat('sense_resistor')
|
|
vsense, cs = self._calc_current(self.current)
|
|
self.fields.set_field("CS", cs)
|
|
self.fields.set_field("VSENSE", vsense)
|
|
|
|
# Register ready/printing handlers
|
|
self.idle_current_percentage = config.getint(
|
|
'idle_current_percent', default=100, minval=0, maxval=100)
|
|
if self.idle_current_percentage < 100:
|
|
self.printer.register_event_handler("idle_timeout:printing",
|
|
self._handle_printing)
|
|
self.printer.register_event_handler("idle_timeout:ready",
|
|
self._handle_ready)
|
|
|
|
gcode = self.printer.lookup_object("gcode")
|
|
gcode.register_mux_command("SET_TMC_CURRENT", "STEPPER", self.name,
|
|
self.cmd_SET_TMC_CURRENT,
|
|
desc=self.cmd_SET_TMC_CURRENT_help)
|
|
|
|
def _calc_current_bits(self, current, vsense):
|
|
vref = 0.165 if vsense else 0.310
|
|
cs = int(32 * current * self.sense_resistor * math.sqrt(2.) / vref
|
|
- 1. + .5)
|
|
return max(0, min(31, cs))
|
|
|
|
def _calc_current(self, run_current):
|
|
vsense = False
|
|
cs = self._calc_current_bits(run_current, vsense)
|
|
if cs < 16:
|
|
vsense = True
|
|
cs = self._calc_current_bits(run_current, vsense)
|
|
return vsense, cs
|
|
|
|
def _handle_printing(self, print_time):
|
|
print_time -= 0.100 # Schedule slightly before deadline
|
|
self.printer.get_reactor().register_callback(
|
|
(lambda ev: self._update_current(self.current, print_time)))
|
|
|
|
def _handle_ready(self, print_time):
|
|
current = self.current * float(self.idle_current_percentage) / 100.
|
|
self.printer.get_reactor().register_callback(
|
|
(lambda ev: self._update_current(current, print_time)))
|
|
|
|
def _update_current(self, current, print_time):
|
|
vsense, cs = self._calc_current(current)
|
|
val = self.fields.set_field("CS", cs)
|
|
self.mcu_tmc.set_register("SGCSCONF", val, print_time)
|
|
# Only update VSENSE if we need to
|
|
if vsense != self.fields.get_field("VSENSE"):
|
|
val = self.fields.set_field("VSENSE", vsense)
|
|
self.mcu_tmc.set_register("DRVCONF", val, print_time)
|
|
|
|
def get_current(self):
|
|
return self.current, None, MAX_CURRENT
|
|
|
|
def set_current(self, run_current, hold_current, print_time):
|
|
self.current = run_current
|
|
self._update_current(run_current, print_time)
|
|
|
|
cmd_SET_TMC_CURRENT_help = "Set the current of a TMC2660 driver"
|
|
def cmd_SET_TMC_CURRENT(self, gcmd):
|
|
cur = gcmd.get_float('CURRENT', None, minval=0.1, maxval=MAX_CURRENT)
|
|
if cur is None:
|
|
return
|
|
print_time = self.printer.lookup_object('toolhead').get_last_move_time()
|
|
self.set_current(cur, None, print_time)
|
|
|
|
|
|
######################################################################
|
|
# TMC2660 SPI
|
|
######################################################################
|
|
|
|
# Helper code for working with TMC2660 devices via SPI
|
|
class MCU_TMC2660_SPI:
|
|
def __init__(self, config, name_to_reg, fields):
|
|
self.printer = config.get_printer()
|
|
self.mutex = self.printer.get_reactor().mutex()
|
|
self.spi = bus.MCU_SPI_from_config(config, 0, default_speed=4000000)
|
|
self.name_to_reg = name_to_reg
|
|
self.fields = fields
|
|
def get_fields(self):
|
|
return self.fields
|
|
def get_register(self, reg_name):
|
|
reg = self.name_to_reg["DRVCONF"]
|
|
val = self.fields.set_field("RDSEL", ReadRegisters.index(reg_name))
|
|
if self.printer.get_start_args().get('debugoutput') is not None:
|
|
return 0
|
|
msg = [((val >> 16) | reg) & 0xff, (val >> 8) & 0xff, val & 0xff]
|
|
with self.mutex:
|
|
params = self.spi.spi_transfer(msg)
|
|
pr = bytearray(params['response'])
|
|
return (pr[0] << 16) | (pr[1] << 8) | pr[2]
|
|
def set_register(self, reg_name, val, print_time=None):
|
|
minclock = 0
|
|
if print_time is not None:
|
|
minclock = self.spi.get_mcu().print_time_to_clock(print_time)
|
|
reg = self.name_to_reg[reg_name]
|
|
msg = [((val >> 16) | reg) & 0xff, (val >> 8) & 0xff, val & 0xff]
|
|
with self.mutex:
|
|
self.spi.spi_send(msg, minclock)
|
|
|
|
|
|
######################################################################
|
|
# TMC2660 printer object
|
|
######################################################################
|
|
|
|
class TMC2660:
|
|
def __init__(self, config):
|
|
# Setup mcu communication
|
|
self.fields = tmc.FieldHelper(Fields, SignedFields, FieldFormatters)
|
|
self.fields.set_field("SDOFF", 0) # Access DRVCTRL in step/dir mode
|
|
self.mcu_tmc = MCU_TMC2660_SPI(config, Registers, self.fields)
|
|
# Register commands
|
|
cmdhelper = tmc.TMCCommandHelper(config, self.mcu_tmc)
|
|
cmdhelper.setup_register_dump(ReadRegisters)
|
|
|
|
# DRVCTRL
|
|
mh = tmc.TMCMicrostepHelper(config, self.mcu_tmc)
|
|
self.get_microsteps = mh.get_microsteps
|
|
self.get_phase = mh.get_phase
|
|
# CHOPCONF
|
|
set_config_field = self.fields.set_config_field
|
|
set_config_field(config, "TBL", 2)
|
|
set_config_field(config, "RNDTF", 0)
|
|
set_config_field(config, "HDEC", 0)
|
|
set_config_field(config, "CHM", 0)
|
|
set_config_field(config, "HEND", 3)
|
|
set_config_field(config, "HSTRT", 3)
|
|
set_config_field(config, "toff", 4)
|
|
if not self.fields.get_field("CHM"):
|
|
if (self.fields.get_field("HSTRT") +
|
|
self.fields.get_field("HEND")) > 15:
|
|
raise config.error("driver_HEND + driver_HSTRT must be <= 15")
|
|
# SMARTEN
|
|
set_config_field(config, "SEIMIN", 0)
|
|
set_config_field(config, "SEDN", 0)
|
|
set_config_field(config, "SEMAX", 0)
|
|
set_config_field(config, "SEUP", 0)
|
|
set_config_field(config, "SEMIN", 0)
|
|
|
|
# SGSCONF
|
|
set_config_field(config, "SFILT", 1)
|
|
set_config_field(config, "SGT", 0)
|
|
TMC2660CurrentHelper(config, self.mcu_tmc)
|
|
|
|
# DRVCONF
|
|
set_config_field(config, "SLPH", 0)
|
|
set_config_field(config, "SLPL", 0)
|
|
set_config_field(config, "DISS2G", 0)
|
|
set_config_field(config, "TS2G", 3)
|
|
|
|
def load_config_prefix(config):
|
|
return TMC2660(config)
|