fess 0a9e3b744c quad_gantry_level: Limit maximum adjustment ... safety feature that prevents quad_gantry_level from trying to do a correction that might break things - if your probe fires early for whatever reason and tries to do an 8mm correction in one corner instead we abort if a correction is over a configurable limit by default 4mm configurable via `max_adjust` parameter in the config Signed-off-by: John "Fess" Fessenden <fess@fess.org>		2019-05-01 14:35:24 -04:00
..
chelper	serialqueue: Wrap code to 80 columns	2019-02-27 14:20:15 -05:00
extras	quad_gantry_level: Limit maximum adjustment	2019-05-01 14:35:24 -04:00
kinematics	corexy: Fix minimum halt velocity	2019-03-30 14:35:18 -04:00
clocksync.py	clocksync: Wrap code to 80 columns	2019-02-27 13:01:52 -05:00
configfile.py	configfile: Add "include" support (#1359)	2019-03-22 20:31:40 -04:00
console.py	bus: Support bus enumerations and add support for reserved pins	2019-04-04 18:29:31 -04:00
gcode.py	menu: Show current positions based on gcode positions (#1389)	2019-03-21 10:37:28 -04:00
heater.py	heater: Wrap code to 80 columns	2019-02-27 13:09:24 -05:00
homing.py	bltouch: Verify probe always deploys during a homing operation	2019-01-21 09:52:11 -05:00
klippy.py	klippy: Report the underlying error on an internal error during connect	2019-04-04 18:38:46 -04:00
mathutil.py	gcode: Change respond_info() to log by default	2019-03-04 13:04:18 -05:00
mcu.py	bus: Support bus enumerations and add support for reserved pins	2019-04-04 18:29:31 -04:00
msgproto.py	bus: Support bus enumerations and add support for reserved pins	2019-04-04 18:29:31 -04:00
parsedump.py	build: Request python2 for all directly executed python binaries	2017-06-27 20:26:02 -04:00
pins.py	bus: Support bus enumerations and add support for reserved pins	2019-04-04 18:29:31 -04:00
queuelogger.py	klippy: Automatically clear rollover_info on each restart	2018-04-03 13:18:52 -04:00
reactor.py	reactor: support for delayed callbacks	2019-01-07 21:38:36 -05:00
serialhdl.py	serialhdl: Enforce exclusive access on POSIX, this is default behavior on windows. (#1216)	2019-04-14 11:27:43 -04:00
stepper.py	endstop_phase: Move endstop phase homing code to new "extras" module	2018-10-16 13:09:23 -04:00
toolhead.py	gcode: Change respond_info() to log by default	2019-03-04 13:04:18 -05:00
util.py	util: Wrap code to 80 columns	2019-02-27 13:05:37 -05:00