mirror of https://github.com/Desuuuu/klipper.git
163 lines
7.1 KiB
Python
163 lines
7.1 KiB
Python
# Printer Skew Correction
|
|
#
|
|
# This implementation is a port of Marlin's skew correction as
|
|
# implemented in planner.h, Copyright (C) Marlin Firmware
|
|
#
|
|
# https://github.com/MarlinFirmware/Marlin/tree/1.1.x/Marlin
|
|
#
|
|
# Copyright (C) 2019 Eric Callahan <arksine.code@gmail.com>
|
|
#
|
|
# This file may be distributed under the terms of the GNU GPLv3 license.
|
|
|
|
import math
|
|
|
|
def calc_skew_factor(ac, bd, ad):
|
|
side = math.sqrt(2*ac*ac + 2*bd*bd - 4*ad*ad) / 2.
|
|
return math.tan(math.pi/2 - math.acos(
|
|
(ac*ac - side*side - ad*ad) / (2*side*ad)))
|
|
|
|
class PrinterSkew:
|
|
def __init__(self, config):
|
|
self.printer = config.get_printer()
|
|
self.name = config.get_name()
|
|
self.gcode = self.printer.lookup_object('gcode')
|
|
self.toolhead = None
|
|
self.xy_factor = 0.
|
|
self.xz_factor = 0.
|
|
self.yz_factor = 0.
|
|
self.skew_profiles = {}
|
|
self._load_storage(config)
|
|
self.printer.register_event_handler("klippy:ready",
|
|
self._handle_ready)
|
|
self.next_transform = None
|
|
self.gcode.register_command(
|
|
'GET_CURRENT_SKEW', self.cmd_GET_CURRENT_SKEW,
|
|
desc=self.cmd_GET_CURRENT_SKEW_help)
|
|
self.gcode.register_command(
|
|
'CALC_MEASURED_SKEW', self.cmd_CALC_MEASURED_SKEW,
|
|
desc=self.cmd_CALC_MEASURED_SKEW_help)
|
|
self.gcode.register_command(
|
|
'SET_SKEW', self.cmd_SET_SKEW,
|
|
desc=self.cmd_SET_SKEW_help)
|
|
self.gcode.register_command(
|
|
'SKEW_PROFILE', self.cmd_SKEW_PROFILE,
|
|
desc=self.cmd_SKEW_PROFILE_help)
|
|
def _handle_ready(self):
|
|
self.next_transform = self.gcode.set_move_transform(self, force=True)
|
|
def _load_storage(self, config):
|
|
stored_profs = config.get_prefix_sections(self.name)
|
|
# Remove primary skew_correction section, as it is not a stored profile
|
|
stored_profs = [s for s in stored_profs
|
|
if s.get_name() != self.name]
|
|
for profile in stored_profs:
|
|
name = profile.get_name().split(' ', 1)[1]
|
|
self.skew_profiles[name] = {
|
|
'xy_skew': profile.getfloat("xy_skew"),
|
|
'xz_skew': profile.getfloat("xz_skew"),
|
|
'yz_skew': profile.getfloat("yz_skew"),
|
|
}
|
|
def calc_skew(self, pos):
|
|
skewed_x = pos[0] - pos[1] * self.xy_factor \
|
|
- pos[2] * (self.xz_factor - (self.xy_factor * self.yz_factor))
|
|
skewed_y = pos[1] - pos[2] * self.yz_factor
|
|
return [skewed_x, skewed_y, pos[2], pos[3]]
|
|
def calc_unskew(self, pos):
|
|
skewed_x = pos[0] + pos[1] * self.xy_factor \
|
|
+ pos[2] * self.xz_factor
|
|
skewed_y = pos[1] + pos[2] * self.yz_factor
|
|
return [skewed_x, skewed_y, pos[2], pos[3]]
|
|
def get_position(self):
|
|
return self.calc_unskew(self.next_transform.get_position())
|
|
def move(self, newpos, speed):
|
|
corrected_pos = self.calc_skew(newpos)
|
|
self.next_transform.move(corrected_pos, speed)
|
|
cmd_GET_CURRENT_SKEW_help = "Report current printer skew"
|
|
def cmd_GET_CURRENT_SKEW(self, params):
|
|
out = "Current Printer Skew:"
|
|
planes = ["XY", "XZ", "YZ"]
|
|
factors = [self.xy_factor, self.xz_factor, self.yz_factor]
|
|
for plane, fac in zip(planes, factors):
|
|
out += '\n' + plane
|
|
out += " Skew: %.6f radians, %.2f degrees" % (
|
|
fac, math.degrees(fac))
|
|
self.gcode.respond_info(out)
|
|
cmd_CALC_MEASURED_SKEW_help = "Calculate skew from measured print"
|
|
def cmd_CALC_MEASURED_SKEW(self, params):
|
|
ac = self.gcode.get_float("AC", params, above=0.)
|
|
bd = self.gcode.get_float("BD", params, above=0.)
|
|
ad = self.gcode.get_float("AD", params, above=0.)
|
|
factor = calc_skew_factor(ac, bd, ad)
|
|
self.gcode.respond_info(
|
|
"Calculated Skew: %.6f radians, %.2f degrees" %
|
|
(factor, math.degrees(factor)))
|
|
cmd_SET_SKEW_help = "Set skew based on lengths of measured object"
|
|
def cmd_SET_SKEW(self, params):
|
|
if self.gcode.get_int("CLEAR", params, 0):
|
|
self.xy_factor = 0.
|
|
self.xz_factor = 0.
|
|
self.yz_factor = 0.
|
|
return
|
|
planes = ["XY", "XZ", "YZ"]
|
|
for plane in planes:
|
|
lengths = self.gcode.get_str(plane, params, None)
|
|
if lengths is not None:
|
|
try:
|
|
lengths = lengths.strip().split(",", 2)
|
|
lengths = [float(l.strip()) for l in lengths]
|
|
if len(lengths) != 3:
|
|
raise Exception
|
|
except Exception:
|
|
raise self.gcode.error(
|
|
"skew_correction: improperly formatted entry for "
|
|
"plane [%s]\n%s" % (plane, params['#original']))
|
|
factor = plane.lower() + '_factor'
|
|
setattr(self, factor, calc_skew_factor(*lengths))
|
|
cmd_SKEW_PROFILE_help = "Profile management for skew_correction"
|
|
def cmd_SKEW_PROFILE(self, params):
|
|
if 'LOAD' in params:
|
|
name = self.gcode.get_str('LOAD', params)
|
|
if name not in self.skew_profiles:
|
|
self.gcode.respond_info(
|
|
"skew_correction: Load failed, unknown profile [%s]" %
|
|
(name))
|
|
return
|
|
self.xy_factor = self.skew_profiles[name]['xy_skew']
|
|
self.xz_factor = self.skew_profiles[name]['xz_skew']
|
|
self.yz_factor = self.skew_profiles[name]['yz_skew']
|
|
elif 'SAVE' in params:
|
|
name = self.gcode.get_str('SAVE', params)
|
|
configfile = self.printer.lookup_object('configfile')
|
|
cfg_name = self.name + " " + name
|
|
configfile.set(cfg_name, 'xy_skew', self.xy_factor)
|
|
configfile.set(cfg_name, 'xz_skew', self.xz_factor)
|
|
configfile.set(cfg_name, 'yz_skew', self.yz_factor)
|
|
# Copy to local storage
|
|
self.skew_profiles[name] = {
|
|
'xy_skew': self.xy_factor,
|
|
'xz_skew': self.xz_factor,
|
|
'yz_skew': self.yz_factor
|
|
}
|
|
self.gcode.respond_info(
|
|
"Skew Correction state has been saved to profile [%s]\n"
|
|
"for the current session. The SAVE_CONFIG command will\n"
|
|
"update the printer config file and restart the printer."
|
|
% (name))
|
|
elif 'REMOVE' in params:
|
|
name = self.gcode.get_str('REMOVE', params)
|
|
if name in self.skew_profiles:
|
|
configfile = self.printer.lookup_object('configfile')
|
|
configfile.remove_section('skew_correction ' + name)
|
|
del self.skew_profiles[name]
|
|
self.gcode.respond_info(
|
|
"Profile [%s] removed from storage for this session.\n"
|
|
"The SAVE_CONFIG command will update the printer\n"
|
|
"configuration and restart the printer" % (name))
|
|
else:
|
|
self.gcode.respond_info(
|
|
"skew_correction: No profile named [%s] to remove" %
|
|
(name))
|
|
|
|
|
|
def load_config(config):
|
|
return PrinterSkew(config)
|