Kevin O'Connor 8a830ff0ce chelper: Compile with gcc -fwhole-program option ... Use the -fwhole-program option when compiling the host C code. This makes it easier to support inlining across C files. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>		2018-06-20 09:26:10 -04:00
..
chelper	chelper: Compile with gcc -fwhole-program option	2018-06-20 09:26:10 -04:00
extras	stepper_buzz: Move STEPPER_BUZZ command from stepper.py to new file	2018-06-20 09:26:10 -04:00
cartesian.py	gcode: Add minval/maxval/above/below options to get_X parsers	2018-04-20 22:24:36 -04:00
clocksync.py	clocksync: Simplify is_active() check	2018-05-31 18:20:30 -04:00
console.py	console: Report timestamp on each read message	2018-05-21 12:01:26 -04:00
corexy.py	homing_override: Allow moves prior to homing an axis	2018-01-28 12:19:26 -05:00
delta.py	stepper: Raise an error if position_endstop is not in min/max range	2018-05-18 19:41:03 -04:00
extruder.py	extruder: Report max_extrude_ratio in log	2018-06-05 20:48:55 -04:00
gcode.py	klippy: Return an error code if batch input results in an error	2018-06-16 16:18:01 -04:00
heater.py	temperature_fan: Add support for temperature-triggered fan.	2018-05-10 19:32:23 -04:00
homing.py	homing: Apply speed rounding after calling home_prepare()	2018-05-14 11:40:35 -04:00
klippy.py	klippy: try_load_module() should return the module loaded	2018-06-20 09:26:10 -04:00
mathutil.py	mathutil: Move coordinate_descent() to new file	2018-03-04 09:56:50 -05:00
mcu.py	mcu: config_reset_cmd typo fixed	2018-06-01 09:49:55 -04:00
msgproto.py	msgproto: Add support for a get_constant_int() method	2018-05-28 10:43:40 -04:00
parsedump.py	build: Request python2 for all directly executed python binaries	2017-06-27 20:26:02 -04:00
pins.py	lpc176x: Add support for GPIO pins	2018-05-25 11:52:13 -04:00
queuelogger.py	klippy: Automatically clear rollover_info on each restart	2018-04-03 13:18:52 -04:00
reactor.py	reactor: Fix bug causing end() to not always work	2017-04-13 13:20:13 -04:00
serialhdl.py	serialqueue: Limit message transmission to available receive buffer size	2018-05-28 11:12:30 -04:00
stepper.py	stepper_buzz: Move STEPPER_BUZZ command from stepper.py to new file	2018-06-20 09:26:10 -04:00
toolhead.py	toolhead: Add support for the M204 command	2018-06-15 12:05:45 -04:00
util.py	util: Change the /tmp/printer pty to be group readable	2018-05-16 13:25:21 -04:00