..
chelper
winch: Add experimental support for cable winch kinematics
2018-12-24 11:38:59 -05:00
extras
controller_fan: Add support for a fan cooling the controller-board ( #1070 )
2019-01-10 12:12:15 -05:00
kinematics
heater: take a gcode_id when setting up a heater ( #1028 )
2019-01-02 17:44:02 -05:00
clocksync.py
clocksync: Simplify is_active() check
2018-05-31 18:20:30 -04:00
configfile.py
configfile: Strip trailing comments
2018-10-16 11:45:20 -04:00
console.py
console: Try to improve the description of the SUPPRESS command
2018-11-16 17:16:14 -05:00
gcode.py
klippy: Convert printer_state("ready") to an event handler
2019-01-08 10:59:43 -05:00
heater.py
heater: take a gcode_id when setting up a heater ( #1028 )
2019-01-02 17:44:02 -05:00
homing.py
homing: Always start endstop checking before the nominal move start
2019-01-10 12:17:57 -05:00
klippy.py
klippy: Fix error handling during connect phase
2019-01-08 13:46:26 -05:00
mathutil.py
delta_calibrate: Perform coordinate descent in a background process
2018-10-15 19:01:19 -04:00
mcu.py
mcu: Fix timing of endstop checking
2019-01-10 12:27:56 -05:00
msgproto.py
msgproto: Add support for a get_constant_int() method
2018-05-28 10:43:40 -04:00
parsedump.py
build: Request python2 for all directly executed python binaries
2017-06-27 20:26:02 -04:00
pins.py
sam3: Add support for sam4s8c chips
2019-01-07 19:34:31 -05:00
queuelogger.py
klippy: Automatically clear rollover_info on each restart
2018-04-03 13:18:52 -04:00
reactor.py
reactor: support for delayed callbacks
2019-01-07 21:38:36 -05:00
serialhdl.py
serialqueue: Limit message transmission to available receive buffer size
2018-05-28 11:12:30 -04:00
stepper.py
endstop_phase: Move endstop phase homing code to new "extras" module
2018-10-16 13:09:23 -04:00
toolhead.py
klippy: Convert printer_state("shutdown") to an event handler
2019-01-08 10:59:43 -05:00
util.py
util: Fix versioning when gitdir is absent ( #809 )
2018-10-27 10:44:38 -04:00
32632c8226