Kevin O'Connor f5c0148665 config: Warn Beaglebone PRU users that pinmux settings are not updated ... The Beaglebone hardware prevents the PRU from updating the pinmux board settings. As a result, the PRU can't directly change the pin direction or change the pullup resistor settings. Warn the Beaglebone users of this limitation. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>		2017-10-25 11:01:36 -04:00
..
avrsim.cfg	heater: Rename thermistor_type config name to sensor_type	2017-03-13 00:46:33 -04:00
example-corexy.cfg	stepper: Use a sane default for homing_positive_dir	2017-07-24 14:31:46 -04:00
example-delta.cfg	stepper: Use a sane default for homing_positive_dir	2017-07-24 14:31:46 -04:00
example-extras.cfg	fan: Enable heater_fan objects on an MCU shutdown event	2017-10-12 11:59:27 -04:00
example.cfg	serialhdl: Don't open port at 1200 baud	2017-10-12 21:46:09 -04:00
generic-cramps.cfg	config: Warn Beaglebone PRU users that pinmux settings are not updated	2017-10-25 11:01:36 -04:00
generic-melzi.cfg	config: Add generic-melzi.cfg file for Melzi boards	2017-10-12 12:43:13 -04:00
generic-rambo.cfg	chipmisc: Add support for configuring ad5206 digipots	2017-08-26 18:27:21 -04:00
generic-ramps.cfg	stepper: Use a sane default for homing_positive_dir	2017-07-24 14:31:46 -04:00
generic-replicape.cfg	config: Warn Beaglebone PRU users that pinmux settings are not updated	2017-10-25 11:01:36 -04:00
makergear-m2-2012.cfg	chipmisc: Add support for configuring ad5206 digipots	2017-08-26 18:27:21 -04:00