mirror of https://github.com/Desuuuu/klipper.git
185 lines
8.2 KiB
Python
185 lines
8.2 KiB
Python
# BLTouch support
|
|
#
|
|
# Copyright (C) 2018-2019 Kevin O'Connor <kevin@koconnor.net>
|
|
#
|
|
# This file may be distributed under the terms of the GNU GPLv3 license.
|
|
import math, logging
|
|
import homing, probe
|
|
|
|
SIGNAL_PERIOD = 0.020
|
|
MIN_CMD_TIME = 5 * SIGNAL_PERIOD
|
|
|
|
TEST_TIME = 5 * 60.
|
|
RETRY_RESET_TIME = 1.
|
|
ENDSTOP_REST_TIME = .001
|
|
ENDSTOP_SAMPLE_TIME = .000015
|
|
ENDSTOP_SAMPLE_COUNT = 4
|
|
|
|
Commands = {
|
|
None: 0.0, 'pin_down': 0.000650, 'touch_mode': 0.001165,
|
|
'pin_up': 0.001475, 'self_test': 0.001780, 'reset': 0.002190,
|
|
}
|
|
|
|
# BLTouch "endstop" wrapper
|
|
class BLTouchEndstopWrapper:
|
|
def __init__(self, config):
|
|
self.printer = config.get_printer()
|
|
self.printer.register_event_handler("klippy:connect",
|
|
self.handle_connect)
|
|
self.position_endstop = config.getfloat('z_offset')
|
|
# Create a pwm object to handle the control pin
|
|
ppins = self.printer.lookup_object('pins')
|
|
self.mcu_pwm = ppins.setup_pin('pwm', config.get('control_pin'))
|
|
self.mcu_pwm.setup_max_duration(0.)
|
|
self.mcu_pwm.setup_cycle_time(SIGNAL_PERIOD)
|
|
self.next_cmd_time = 0.
|
|
# Create an "endstop" object to handle the sensor pin
|
|
pin = config.get('sensor_pin')
|
|
pin_params = ppins.lookup_pin(pin, can_invert=True, can_pullup=True)
|
|
mcu = pin_params['chip']
|
|
mcu.register_config_callback(self._build_config)
|
|
self.mcu_endstop = mcu.setup_pin('endstop', pin_params)
|
|
# Setup for sensor test
|
|
self.next_test_time = 0.
|
|
self.pin_up_not_triggered = config.getboolean(
|
|
'pin_up_reports_not_triggered', True)
|
|
self.pin_up_touch_triggered = config.getboolean(
|
|
'pin_up_touch_mode_reports_triggered', True)
|
|
self.start_mcu_pos = []
|
|
# Calculate pin move time
|
|
pmt = max(config.getfloat('pin_move_time', 0.675), MIN_CMD_TIME)
|
|
self.pin_move_time = math.ceil(pmt / SIGNAL_PERIOD) * SIGNAL_PERIOD
|
|
# Wrappers
|
|
self.get_mcu = self.mcu_endstop.get_mcu
|
|
self.add_stepper = self.mcu_endstop.add_stepper
|
|
self.get_steppers = self.mcu_endstop.get_steppers
|
|
self.home_wait = self.mcu_endstop.home_wait
|
|
self.query_endstop = self.mcu_endstop.query_endstop
|
|
self.TimeoutError = self.mcu_endstop.TimeoutError
|
|
# Register BLTOUCH_DEBUG command
|
|
self.gcode = self.printer.lookup_object('gcode')
|
|
self.gcode.register_command("BLTOUCH_DEBUG", self.cmd_BLTOUCH_DEBUG,
|
|
desc=self.cmd_BLTOUCH_DEBUG_help)
|
|
def _build_config(self):
|
|
kin = self.printer.lookup_object('toolhead').get_kinematics()
|
|
for stepper in kin.get_steppers('Z'):
|
|
stepper.add_to_endstop(self)
|
|
def handle_connect(self):
|
|
try:
|
|
self.raise_probe()
|
|
except homing.CommandError as e:
|
|
logging.warning("BLTouch raise probe error: %s", str(e))
|
|
def sync_mcu_print_time(self):
|
|
curtime = self.printer.get_reactor().monotonic()
|
|
est_time = self.mcu_pwm.get_mcu().estimated_print_time(curtime)
|
|
self.next_cmd_time = max(self.next_cmd_time, est_time + MIN_CMD_TIME)
|
|
def sync_print_time(self):
|
|
toolhead = self.printer.lookup_object('toolhead')
|
|
print_time = toolhead.get_last_move_time()
|
|
if self.next_cmd_time > print_time:
|
|
toolhead.dwell(self.next_cmd_time - print_time)
|
|
else:
|
|
self.next_cmd_time = print_time
|
|
def send_cmd(self, cmd, duration=MIN_CMD_TIME):
|
|
self.mcu_pwm.set_pwm(self.next_cmd_time, Commands[cmd] / SIGNAL_PERIOD)
|
|
# Translate duration to ticks to avoid any secondary mcu clock skew
|
|
mcu = self.mcu_pwm.get_mcu()
|
|
cmd_clock = mcu.print_time_to_clock(self.next_cmd_time)
|
|
cmd_clock += mcu.seconds_to_clock(max(duration, MIN_CMD_TIME))
|
|
self.next_cmd_time = mcu.clock_to_print_time(cmd_clock)
|
|
return self.next_cmd_time
|
|
def verify_state(self, check_start_time, check_end_time, triggered, msg):
|
|
# Perform endstop check to verify bltouch reports desired state
|
|
prev_positions = [s.get_commanded_position()
|
|
for s in self.mcu_endstop.get_steppers()]
|
|
self.mcu_endstop.home_start(check_start_time, ENDSTOP_SAMPLE_TIME,
|
|
ENDSTOP_SAMPLE_COUNT, ENDSTOP_REST_TIME,
|
|
triggered=triggered)
|
|
try:
|
|
self.mcu_endstop.home_wait(check_end_time)
|
|
except self.mcu_endstop.TimeoutError as e:
|
|
raise homing.EndstopError("BLTouch failed to %s" % (msg,))
|
|
for s, pos in zip(self.mcu_endstop.get_steppers(), prev_positions):
|
|
s.set_commanded_position(pos)
|
|
def raise_probe(self):
|
|
for retry in range(3):
|
|
self.sync_mcu_print_time()
|
|
if retry or not self.pin_up_not_triggered:
|
|
self.send_cmd('reset')
|
|
check_start_time = self.send_cmd('pin_up',
|
|
duration=self.pin_move_time)
|
|
check_end_time = self.send_cmd(None)
|
|
if self.pin_up_not_triggered:
|
|
try:
|
|
self.verify_state(check_start_time, check_end_time,
|
|
False, "raise probe")
|
|
except homing.CommandError as e:
|
|
if retry >= 2:
|
|
raise
|
|
msg = "Failed to verify BLTouch probe is raised; retrying."
|
|
self.gcode.respond_info(msg)
|
|
self.next_cmd_time += RETRY_RESET_TIME
|
|
continue
|
|
break
|
|
def test_sensor(self):
|
|
if not self.pin_up_touch_triggered:
|
|
# Nothing to test
|
|
return
|
|
toolhead = self.printer.lookup_object('toolhead')
|
|
print_time = toolhead.get_last_move_time()
|
|
if print_time < self.next_test_time:
|
|
self.next_test_time = print_time + TEST_TIME
|
|
return
|
|
# Raise the bltouch probe and test if probe is raised
|
|
self.sync_print_time()
|
|
check_start_time = self.send_cmd('reset', duration=self.pin_move_time)
|
|
check_end_time = self.send_cmd('touch_mode')
|
|
self.send_cmd(None)
|
|
self.verify_state(check_start_time, check_end_time, True,
|
|
"verify sensor state")
|
|
# Test was successful
|
|
self.next_test_time = check_end_time + TEST_TIME
|
|
self.sync_print_time()
|
|
def home_prepare(self):
|
|
self.test_sensor()
|
|
self.sync_print_time()
|
|
duration = max(MIN_CMD_TIME, self.pin_move_time - MIN_CMD_TIME)
|
|
self.send_cmd('pin_down', duration=duration)
|
|
self.send_cmd(None)
|
|
self.sync_print_time()
|
|
self.mcu_endstop.home_prepare()
|
|
self.start_mcu_pos = [(s, s.get_mcu_position())
|
|
for s in self.mcu_endstop.get_steppers()]
|
|
def home_finalize(self):
|
|
self.raise_probe()
|
|
self.sync_print_time()
|
|
# Verify the probe actually deployed during the attempt
|
|
for s, mcu_pos in self.start_mcu_pos:
|
|
if s.get_mcu_position() == mcu_pos:
|
|
raise homing.EndstopError("BLTouch failed to deploy")
|
|
self.mcu_endstop.home_finalize()
|
|
def home_start(self, print_time, sample_time, sample_count, rest_time,
|
|
notify=None):
|
|
rest_time = min(rest_time, ENDSTOP_REST_TIME)
|
|
self.mcu_endstop.home_start(print_time, sample_time, sample_count,
|
|
rest_time, notify=notify)
|
|
def get_position_endstop(self):
|
|
return self.position_endstop
|
|
cmd_BLTOUCH_DEBUG_help = "Send a command to the bltouch for debugging"
|
|
def cmd_BLTOUCH_DEBUG(self, params):
|
|
cmd = self.gcode.get_str('COMMAND', params, None)
|
|
if cmd is None or cmd not in Commands:
|
|
self.gcode.respond_info("BLTouch commands: %s" % (
|
|
", ".join(sorted([c for c in Commands if c is not None]))))
|
|
return
|
|
self.gcode.respond_info("Sending BLTOUCH_DEBUG COMMAND=%s" % (cmd,))
|
|
self.sync_print_time()
|
|
self.send_cmd(cmd, duration=self.pin_move_time)
|
|
self.send_cmd(None)
|
|
self.sync_print_time()
|
|
|
|
def load_config(config):
|
|
blt = BLTouchEndstopWrapper(config)
|
|
config.get_printer().add_object('probe', probe.PrinterProbe(config, blt))
|
|
return blt
|