mirror of https://github.com/Desuuuu/klipper.git
130 lines
9.7 KiB
C
130 lines
9.7 KiB
C
/**
|
|
* \file
|
|
*
|
|
* \brief Instance description for SERCOM0
|
|
*
|
|
* Copyright (c) 2018 Microchip Technology Inc.
|
|
*
|
|
* \asf_license_start
|
|
*
|
|
* \page License
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*
|
|
* Licensed under the Apache License, Version 2.0 (the "License"); you may
|
|
* not use this file except in compliance with the License.
|
|
* You may obtain a copy of the Licence at
|
|
*
|
|
* http://www.apache.org/licenses/LICENSE-2.0
|
|
*
|
|
* Unless required by applicable law or agreed to in writing, software
|
|
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
|
|
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
* See the License for the specific language governing permissions and
|
|
* limitations under the License.
|
|
*
|
|
* \asf_license_stop
|
|
*
|
|
*/
|
|
|
|
#ifndef _SAMD21_SERCOM0_INSTANCE_
|
|
#define _SAMD21_SERCOM0_INSTANCE_
|
|
|
|
/* ========== Register definition for SERCOM0 peripheral ========== */
|
|
#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
|
|
#define REG_SERCOM0_I2CM_CTRLA (0x42000800) /**< \brief (SERCOM0) I2CM Control A */
|
|
#define REG_SERCOM0_I2CM_CTRLB (0x42000804) /**< \brief (SERCOM0) I2CM Control B */
|
|
#define REG_SERCOM0_I2CM_BAUD (0x4200080C) /**< \brief (SERCOM0) I2CM Baud Rate */
|
|
#define REG_SERCOM0_I2CM_INTENCLR (0x42000814) /**< \brief (SERCOM0) I2CM Interrupt Enable Clear */
|
|
#define REG_SERCOM0_I2CM_INTENSET (0x42000816) /**< \brief (SERCOM0) I2CM Interrupt Enable Set */
|
|
#define REG_SERCOM0_I2CM_INTFLAG (0x42000818) /**< \brief (SERCOM0) I2CM Interrupt Flag Status and Clear */
|
|
#define REG_SERCOM0_I2CM_STATUS (0x4200081A) /**< \brief (SERCOM0) I2CM Status */
|
|
#define REG_SERCOM0_I2CM_SYNCBUSY (0x4200081C) /**< \brief (SERCOM0) I2CM Syncbusy */
|
|
#define REG_SERCOM0_I2CM_ADDR (0x42000824) /**< \brief (SERCOM0) I2CM Address */
|
|
#define REG_SERCOM0_I2CM_DATA (0x42000828) /**< \brief (SERCOM0) I2CM Data */
|
|
#define REG_SERCOM0_I2CM_DBGCTRL (0x42000830) /**< \brief (SERCOM0) I2CM Debug Control */
|
|
#define REG_SERCOM0_I2CS_CTRLA (0x42000800) /**< \brief (SERCOM0) I2CS Control A */
|
|
#define REG_SERCOM0_I2CS_CTRLB (0x42000804) /**< \brief (SERCOM0) I2CS Control B */
|
|
#define REG_SERCOM0_I2CS_INTENCLR (0x42000814) /**< \brief (SERCOM0) I2CS Interrupt Enable Clear */
|
|
#define REG_SERCOM0_I2CS_INTENSET (0x42000816) /**< \brief (SERCOM0) I2CS Interrupt Enable Set */
|
|
#define REG_SERCOM0_I2CS_INTFLAG (0x42000818) /**< \brief (SERCOM0) I2CS Interrupt Flag Status and Clear */
|
|
#define REG_SERCOM0_I2CS_STATUS (0x4200081A) /**< \brief (SERCOM0) I2CS Status */
|
|
#define REG_SERCOM0_I2CS_SYNCBUSY (0x4200081C) /**< \brief (SERCOM0) I2CS Syncbusy */
|
|
#define REG_SERCOM0_I2CS_ADDR (0x42000824) /**< \brief (SERCOM0) I2CS Address */
|
|
#define REG_SERCOM0_I2CS_DATA (0x42000828) /**< \brief (SERCOM0) I2CS Data */
|
|
#define REG_SERCOM0_SPI_CTRLA (0x42000800) /**< \brief (SERCOM0) SPI Control A */
|
|
#define REG_SERCOM0_SPI_CTRLB (0x42000804) /**< \brief (SERCOM0) SPI Control B */
|
|
#define REG_SERCOM0_SPI_BAUD (0x4200080C) /**< \brief (SERCOM0) SPI Baud Rate */
|
|
#define REG_SERCOM0_SPI_INTENCLR (0x42000814) /**< \brief (SERCOM0) SPI Interrupt Enable Clear */
|
|
#define REG_SERCOM0_SPI_INTENSET (0x42000816) /**< \brief (SERCOM0) SPI Interrupt Enable Set */
|
|
#define REG_SERCOM0_SPI_INTFLAG (0x42000818) /**< \brief (SERCOM0) SPI Interrupt Flag Status and Clear */
|
|
#define REG_SERCOM0_SPI_STATUS (0x4200081A) /**< \brief (SERCOM0) SPI Status */
|
|
#define REG_SERCOM0_SPI_SYNCBUSY (0x4200081C) /**< \brief (SERCOM0) SPI Syncbusy */
|
|
#define REG_SERCOM0_SPI_ADDR (0x42000824) /**< \brief (SERCOM0) SPI Address */
|
|
#define REG_SERCOM0_SPI_DATA (0x42000828) /**< \brief (SERCOM0) SPI Data */
|
|
#define REG_SERCOM0_SPI_DBGCTRL (0x42000830) /**< \brief (SERCOM0) SPI Debug Control */
|
|
#define REG_SERCOM0_USART_CTRLA (0x42000800) /**< \brief (SERCOM0) USART Control A */
|
|
#define REG_SERCOM0_USART_CTRLB (0x42000804) /**< \brief (SERCOM0) USART Control B */
|
|
#define REG_SERCOM0_USART_BAUD (0x4200080C) /**< \brief (SERCOM0) USART Baud Rate */
|
|
#define REG_SERCOM0_USART_RXPL (0x4200080E) /**< \brief (SERCOM0) USART Receive Pulse Length */
|
|
#define REG_SERCOM0_USART_INTENCLR (0x42000814) /**< \brief (SERCOM0) USART Interrupt Enable Clear */
|
|
#define REG_SERCOM0_USART_INTENSET (0x42000816) /**< \brief (SERCOM0) USART Interrupt Enable Set */
|
|
#define REG_SERCOM0_USART_INTFLAG (0x42000818) /**< \brief (SERCOM0) USART Interrupt Flag Status and Clear */
|
|
#define REG_SERCOM0_USART_STATUS (0x4200081A) /**< \brief (SERCOM0) USART Status */
|
|
#define REG_SERCOM0_USART_SYNCBUSY (0x4200081C) /**< \brief (SERCOM0) USART Syncbusy */
|
|
#define REG_SERCOM0_USART_DATA (0x42000828) /**< \brief (SERCOM0) USART Data */
|
|
#define REG_SERCOM0_USART_DBGCTRL (0x42000830) /**< \brief (SERCOM0) USART Debug Control */
|
|
#else
|
|
#define REG_SERCOM0_I2CM_CTRLA (*(RwReg *)0x42000800UL) /**< \brief (SERCOM0) I2CM Control A */
|
|
#define REG_SERCOM0_I2CM_CTRLB (*(RwReg *)0x42000804UL) /**< \brief (SERCOM0) I2CM Control B */
|
|
#define REG_SERCOM0_I2CM_BAUD (*(RwReg *)0x4200080CUL) /**< \brief (SERCOM0) I2CM Baud Rate */
|
|
#define REG_SERCOM0_I2CM_INTENCLR (*(RwReg8 *)0x42000814UL) /**< \brief (SERCOM0) I2CM Interrupt Enable Clear */
|
|
#define REG_SERCOM0_I2CM_INTENSET (*(RwReg8 *)0x42000816UL) /**< \brief (SERCOM0) I2CM Interrupt Enable Set */
|
|
#define REG_SERCOM0_I2CM_INTFLAG (*(RwReg8 *)0x42000818UL) /**< \brief (SERCOM0) I2CM Interrupt Flag Status and Clear */
|
|
#define REG_SERCOM0_I2CM_STATUS (*(RwReg16*)0x4200081AUL) /**< \brief (SERCOM0) I2CM Status */
|
|
#define REG_SERCOM0_I2CM_SYNCBUSY (*(RoReg *)0x4200081CUL) /**< \brief (SERCOM0) I2CM Syncbusy */
|
|
#define REG_SERCOM0_I2CM_ADDR (*(RwReg *)0x42000824UL) /**< \brief (SERCOM0) I2CM Address */
|
|
#define REG_SERCOM0_I2CM_DATA (*(RwReg8 *)0x42000828UL) /**< \brief (SERCOM0) I2CM Data */
|
|
#define REG_SERCOM0_I2CM_DBGCTRL (*(RwReg8 *)0x42000830UL) /**< \brief (SERCOM0) I2CM Debug Control */
|
|
#define REG_SERCOM0_I2CS_CTRLA (*(RwReg *)0x42000800UL) /**< \brief (SERCOM0) I2CS Control A */
|
|
#define REG_SERCOM0_I2CS_CTRLB (*(RwReg *)0x42000804UL) /**< \brief (SERCOM0) I2CS Control B */
|
|
#define REG_SERCOM0_I2CS_INTENCLR (*(RwReg8 *)0x42000814UL) /**< \brief (SERCOM0) I2CS Interrupt Enable Clear */
|
|
#define REG_SERCOM0_I2CS_INTENSET (*(RwReg8 *)0x42000816UL) /**< \brief (SERCOM0) I2CS Interrupt Enable Set */
|
|
#define REG_SERCOM0_I2CS_INTFLAG (*(RwReg8 *)0x42000818UL) /**< \brief (SERCOM0) I2CS Interrupt Flag Status and Clear */
|
|
#define REG_SERCOM0_I2CS_STATUS (*(RwReg16*)0x4200081AUL) /**< \brief (SERCOM0) I2CS Status */
|
|
#define REG_SERCOM0_I2CS_SYNCBUSY (*(RoReg *)0x4200081CUL) /**< \brief (SERCOM0) I2CS Syncbusy */
|
|
#define REG_SERCOM0_I2CS_ADDR (*(RwReg *)0x42000824UL) /**< \brief (SERCOM0) I2CS Address */
|
|
#define REG_SERCOM0_I2CS_DATA (*(RwReg8 *)0x42000828UL) /**< \brief (SERCOM0) I2CS Data */
|
|
#define REG_SERCOM0_SPI_CTRLA (*(RwReg *)0x42000800UL) /**< \brief (SERCOM0) SPI Control A */
|
|
#define REG_SERCOM0_SPI_CTRLB (*(RwReg *)0x42000804UL) /**< \brief (SERCOM0) SPI Control B */
|
|
#define REG_SERCOM0_SPI_BAUD (*(RwReg8 *)0x4200080CUL) /**< \brief (SERCOM0) SPI Baud Rate */
|
|
#define REG_SERCOM0_SPI_INTENCLR (*(RwReg8 *)0x42000814UL) /**< \brief (SERCOM0) SPI Interrupt Enable Clear */
|
|
#define REG_SERCOM0_SPI_INTENSET (*(RwReg8 *)0x42000816UL) /**< \brief (SERCOM0) SPI Interrupt Enable Set */
|
|
#define REG_SERCOM0_SPI_INTFLAG (*(RwReg8 *)0x42000818UL) /**< \brief (SERCOM0) SPI Interrupt Flag Status and Clear */
|
|
#define REG_SERCOM0_SPI_STATUS (*(RwReg16*)0x4200081AUL) /**< \brief (SERCOM0) SPI Status */
|
|
#define REG_SERCOM0_SPI_SYNCBUSY (*(RoReg *)0x4200081CUL) /**< \brief (SERCOM0) SPI Syncbusy */
|
|
#define REG_SERCOM0_SPI_ADDR (*(RwReg *)0x42000824UL) /**< \brief (SERCOM0) SPI Address */
|
|
#define REG_SERCOM0_SPI_DATA (*(RwReg *)0x42000828UL) /**< \brief (SERCOM0) SPI Data */
|
|
#define REG_SERCOM0_SPI_DBGCTRL (*(RwReg8 *)0x42000830UL) /**< \brief (SERCOM0) SPI Debug Control */
|
|
#define REG_SERCOM0_USART_CTRLA (*(RwReg *)0x42000800UL) /**< \brief (SERCOM0) USART Control A */
|
|
#define REG_SERCOM0_USART_CTRLB (*(RwReg *)0x42000804UL) /**< \brief (SERCOM0) USART Control B */
|
|
#define REG_SERCOM0_USART_BAUD (*(RwReg16*)0x4200080CUL) /**< \brief (SERCOM0) USART Baud Rate */
|
|
#define REG_SERCOM0_USART_RXPL (*(RwReg8 *)0x4200080EUL) /**< \brief (SERCOM0) USART Receive Pulse Length */
|
|
#define REG_SERCOM0_USART_INTENCLR (*(RwReg8 *)0x42000814UL) /**< \brief (SERCOM0) USART Interrupt Enable Clear */
|
|
#define REG_SERCOM0_USART_INTENSET (*(RwReg8 *)0x42000816UL) /**< \brief (SERCOM0) USART Interrupt Enable Set */
|
|
#define REG_SERCOM0_USART_INTFLAG (*(RwReg8 *)0x42000818UL) /**< \brief (SERCOM0) USART Interrupt Flag Status and Clear */
|
|
#define REG_SERCOM0_USART_STATUS (*(RwReg16*)0x4200081AUL) /**< \brief (SERCOM0) USART Status */
|
|
#define REG_SERCOM0_USART_SYNCBUSY (*(RoReg *)0x4200081CUL) /**< \brief (SERCOM0) USART Syncbusy */
|
|
#define REG_SERCOM0_USART_DATA (*(RwReg16*)0x42000828UL) /**< \brief (SERCOM0) USART Data */
|
|
#define REG_SERCOM0_USART_DBGCTRL (*(RwReg8 *)0x42000830UL) /**< \brief (SERCOM0) USART Debug Control */
|
|
#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
|
|
|
|
/* ========== Instance parameters for SERCOM0 peripheral ========== */
|
|
#define SERCOM0_DMAC_ID_RX 1 // Index of DMA RX trigger
|
|
#define SERCOM0_DMAC_ID_TX 2 // Index of DMA TX trigger
|
|
#define SERCOM0_GCLK_ID_CORE 20 // Index of Generic Clock for Core
|
|
#define SERCOM0_GCLK_ID_SLOW 19 // Index of Generic Clock for SMbus timeout
|
|
#define SERCOM0_INT_MSB 6
|
|
|
|
#endif /* _SAMD21_SERCOM0_INSTANCE_ */
|