klipper-dgus/lib/hal-stm32f0/source/stm32f0xx_hal_crc.c

532 lines
17 KiB
C

/**
******************************************************************************
* @file stm32f0xx_hal_crc.c
* @author MCD Application Team
* @brief CRC HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the Cyclic Redundancy Check (CRC) peripheral:
* + Initialization and de-initialization functions
* + Peripheral Control functions
* + Peripheral State functions
*
@verbatim
===============================================================================
##### How to use this driver #####
===============================================================================
[..]
(+) Enable CRC AHB clock using __HAL_RCC_CRC_CLK_ENABLE();
(+) Initialize CRC calculator
(++)specify generating polynomial (IP default or non-default one)
(++)specify initialization value (IP default or non-default one)
(++)specify input data format
(++)specify input or output data inversion mode if any
(+) Use HAL_CRC_Accumulate() function to compute the CRC value of the
input data buffer starting with the previously computed CRC as
initialization value
(+) Use HAL_CRC_Calculate() function to compute the CRC value of the
input data buffer starting with the defined initialization value
(default or non-default) to initiate CRC calculation
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx_hal.h"
/** @addtogroup STM32F0xx_HAL_Driver
* @{
*/
/** @defgroup CRC CRC
* @brief CRC HAL module driver.
* @{
*/
#ifdef HAL_CRC_MODULE_ENABLED
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/** @defgroup CRC_Private_Functions CRC Private Functions
* @{
*/
static uint32_t CRC_Handle_8(CRC_HandleTypeDef *hcrc, uint8_t pBuffer[], uint32_t BufferLength);
static uint32_t CRC_Handle_16(CRC_HandleTypeDef *hcrc, uint16_t pBuffer[], uint32_t BufferLength);
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup CRC_Exported_Functions CRC Exported Functions
* @{
*/
/** @defgroup CRC_Exported_Functions_Group1 Initialization/de-initialization functions
* @brief Initialization and Configuration functions.
*
@verbatim
===============================================================================
##### Initialization and de-initialization functions #####
===============================================================================
[..] This section provides functions allowing to:
(+) Initialize the CRC according to the specified parameters
in the CRC_InitTypeDef and create the associated handle
(+) DeInitialize the CRC peripheral
(+) Initialize the CRC MSP (MCU Specific Package)
(+) DeInitialize the CRC MSP
@endverbatim
* @{
*/
/**
* @brief Initialize the CRC according to the specified
* parameters in the CRC_InitTypeDef and initialize the associated handle.
* @param hcrc CRC handle
* @retval HAL status
*/
HAL_StatusTypeDef HAL_CRC_Init(CRC_HandleTypeDef *hcrc)
{
/* Check the CRC handle allocation */
if(hcrc == NULL)
{
return HAL_ERROR;
}
/* Check the parameters */
assert_param(IS_CRC_ALL_INSTANCE(hcrc->Instance));
if(hcrc->State == HAL_CRC_STATE_RESET)
{
/* Allocate lock resource and initialize it */
hcrc->Lock = HAL_UNLOCKED;
/* Init the low level hardware */
HAL_CRC_MspInit(hcrc);
}
hcrc->State = HAL_CRC_STATE_BUSY;
/* Extended initialization: if programmable polynomial feature is
applicable to device, set default or non-default generating
polynomial according to hcrc->Init parameters.
If feature is non-applicable to device in use, HAL_CRCEx_Init straight
away reports HAL_OK. */
if (HAL_CRCEx_Init(hcrc) != HAL_OK)
{
return HAL_ERROR;
}
/* check whether or not non-default CRC initial value has been
* picked up by user */
assert_param(IS_DEFAULT_INIT_VALUE(hcrc->Init.DefaultInitValueUse));
if (hcrc->Init.DefaultInitValueUse == DEFAULT_INIT_VALUE_ENABLE)
{
WRITE_REG(hcrc->Instance->INIT, DEFAULT_CRC_INITVALUE);
}
else
{
WRITE_REG(hcrc->Instance->INIT, hcrc->Init.InitValue);
}
/* set input data inversion mode */
assert_param(IS_CRC_INPUTDATA_INVERSION_MODE(hcrc->Init.InputDataInversionMode));
MODIFY_REG(hcrc->Instance->CR, CRC_CR_REV_IN, hcrc->Init.InputDataInversionMode);
/* set output data inversion mode */
assert_param(IS_CRC_OUTPUTDATA_INVERSION_MODE(hcrc->Init.OutputDataInversionMode));
MODIFY_REG(hcrc->Instance->CR, CRC_CR_REV_OUT, hcrc->Init.OutputDataInversionMode);
/* makes sure the input data format (bytes, halfwords or words stream)
* is properly specified by user */
assert_param(IS_CRC_INPUTDATA_FORMAT(hcrc->InputDataFormat));
/* Change CRC peripheral state */
hcrc->State = HAL_CRC_STATE_READY;
/* Return function status */
return HAL_OK;
}
/**
* @brief DeInitialize the CRC peripheral.
* @param hcrc CRC handle
* @retval HAL status
*/
HAL_StatusTypeDef HAL_CRC_DeInit(CRC_HandleTypeDef *hcrc)
{
/* Check the CRC handle allocation */
if(hcrc == NULL)
{
return HAL_ERROR;
}
/* Check the parameters */
assert_param(IS_CRC_ALL_INSTANCE(hcrc->Instance));
/* Check the CRC peripheral state */
if(hcrc->State == HAL_CRC_STATE_BUSY)
{
return HAL_BUSY;
}
/* Change CRC peripheral state */
hcrc->State = HAL_CRC_STATE_BUSY;
/* Reset CRC calculation unit */
__HAL_CRC_DR_RESET(hcrc);
/* Reset IDR register content */
CLEAR_BIT(hcrc->Instance->IDR, CRC_IDR_IDR) ;
/* DeInit the low level hardware */
HAL_CRC_MspDeInit(hcrc);
/* Change CRC peripheral state */
hcrc->State = HAL_CRC_STATE_RESET;
/* Process unlocked */
__HAL_UNLOCK(hcrc);
/* Return function status */
return HAL_OK;
}
/**
* @brief Initializes the CRC MSP.
* @param hcrc CRC handle
* @retval None
*/
__weak void HAL_CRC_MspInit(CRC_HandleTypeDef *hcrc)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(hcrc);
/* NOTE : This function should not be modified, when the callback is needed,
the HAL_CRC_MspInit can be implemented in the user file
*/
}
/**
* @brief DeInitialize the CRC MSP.
* @param hcrc CRC handle
* @retval None
*/
__weak void HAL_CRC_MspDeInit(CRC_HandleTypeDef *hcrc)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(hcrc);
/* NOTE : This function should not be modified, when the callback is needed,
the HAL_CRC_MspDeInit can be implemented in the user file
*/
}
/**
* @}
*/
/** @defgroup CRC_Exported_Functions_Group2 Peripheral Control functions
* @brief management functions.
*
@verbatim
===============================================================================
##### Peripheral Control functions #####
===============================================================================
[..] This section provides functions allowing to:
(+) compute the 7U, 8U, 16 or 32-bit CRC value of an 8U, 16 or 32-bit data buffer
using the combination of the previous CRC value and the new one
[..] or
(+) compute the 7U, 8U, 16 or 32-bit CRC value of an 8U, 16 or 32-bit data buffer
independently of the previous CRC value.
@endverbatim
* @{
*/
/**
* @brief Compute the 7, 8, 16 or 32-bit CRC value of an 8, 16 or 32-bit data buffer
* starting with the previously computed CRC as initialization value.
* @param hcrc CRC handle
* @param pBuffer pointer to the input data buffer, exact input data format is
* provided by hcrc->InputDataFormat.
* @param BufferLength input data buffer length (number of bytes if pBuffer
* type is * uint8_t, number of half-words if pBuffer type is * uint16_t,
* number of words if pBuffer type is * uint32_t).
* @note By default, the API expects a uint32_t pointer as input buffer parameter.
* Input buffer pointers with other types simply need to be cast in uint32_t
* and the API will internally adjust its input data processing based on the
* handle field hcrc->InputDataFormat.
* @retval uint32_t CRC (returned value LSBs for CRC shorter than 32 bits)
*/
uint32_t HAL_CRC_Accumulate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength)
{
uint32_t index = 0U; /* CRC input data buffer index */
uint32_t temp = 0U; /* CRC output (read from hcrc->Instance->DR register) */
/* Process locked */
__HAL_LOCK(hcrc);
/* Change CRC peripheral state */
hcrc->State = HAL_CRC_STATE_BUSY;
switch (hcrc->InputDataFormat)
{
case CRC_INPUTDATA_FORMAT_WORDS:
/* Enter Data to the CRC calculator */
for(index = 0U; index < BufferLength; index++)
{
hcrc->Instance->DR = pBuffer[index];
}
temp = hcrc->Instance->DR;
break;
case CRC_INPUTDATA_FORMAT_BYTES:
temp = CRC_Handle_8(hcrc, (uint8_t*)pBuffer, BufferLength);
break;
case CRC_INPUTDATA_FORMAT_HALFWORDS:
temp = CRC_Handle_16(hcrc, (uint16_t*)pBuffer, BufferLength);
break;
default:
break;
}
/* Change CRC peripheral state */
hcrc->State = HAL_CRC_STATE_READY;
/* Process unlocked */
__HAL_UNLOCK(hcrc);
/* Return the CRC computed value */
return temp;
}
/**
* @brief Compute the 7, 8, 16 or 32-bit CRC value of an 8, 16 or 32-bit data buffer
* starting with hcrc->Instance->INIT as initialization value.
* @param hcrc CRC handle
* @param pBuffer pointer to the input data buffer, exact input data format is
* provided by hcrc->InputDataFormat.
* @param BufferLength input data buffer length (number of bytes if pBuffer
* type is * uint8_t, number of half-words if pBuffer type is * uint16_t,
* number of words if pBuffer type is * uint32_t).
* @note By default, the API expects a uint32_t pointer as input buffer parameter.
* Input buffer pointers with other types simply need to be cast in uint32_t
* and the API will internally adjust its input data processing based on the
* handle field hcrc->InputDataFormat.
* @retval uint32_t CRC (returned value LSBs for CRC shorter than 32 bits)
*/
uint32_t HAL_CRC_Calculate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength)
{
uint32_t index = 0U; /* CRC input data buffer index */
uint32_t temp = 0U; /* CRC output (read from hcrc->Instance->DR register) */
/* Process locked */
__HAL_LOCK(hcrc);
/* Change CRC peripheral state */
hcrc->State = HAL_CRC_STATE_BUSY;
/* Reset CRC Calculation Unit (hcrc->Instance->INIT is
* written in hcrc->Instance->DR) */
__HAL_CRC_DR_RESET(hcrc);
switch (hcrc->InputDataFormat)
{
case CRC_INPUTDATA_FORMAT_WORDS:
/* Enter 32-bit input data to the CRC calculator */
for(index = 0U; index < BufferLength; index++)
{
hcrc->Instance->DR = pBuffer[index];
}
temp = hcrc->Instance->DR;
break;
case CRC_INPUTDATA_FORMAT_BYTES:
/* Specific 8-bit input data handling */
temp = CRC_Handle_8(hcrc, (uint8_t*)pBuffer, BufferLength);
break;
case CRC_INPUTDATA_FORMAT_HALFWORDS:
/* Specific 16-bit input data handling */
temp = CRC_Handle_16(hcrc, (uint16_t*)pBuffer, BufferLength);
break;
default:
break;
}
/* Change CRC peripheral state */
hcrc->State = HAL_CRC_STATE_READY;
/* Process unlocked */
__HAL_UNLOCK(hcrc);
/* Return the CRC computed value */
return temp;
}
/**
* @}
*/
/** @defgroup CRC_Exported_Functions_Group3 Peripheral State functions
* @brief Peripheral State functions.
*
@verbatim
===============================================================================
##### Peripheral State functions #####
===============================================================================
[..]
This subsection permits to get in run-time the status of the peripheral.
@endverbatim
* @{
*/
/**
* @brief Return the CRC handle state.
* @param hcrc CRC handle
* @retval HAL state
*/
HAL_CRC_StateTypeDef HAL_CRC_GetState(CRC_HandleTypeDef *hcrc)
{
/* Return CRC handle state */
return hcrc->State;
}
/**
* @}
*/
/**
* @}
*/
/** @defgroup CRC_Private_Functions CRC Private Functions
* @{
*/
/**
* @brief Enter 8-bit input data to the CRC calculator.
* Specific data handling to optimize processing time.
* @param hcrc CRC handle
* @param pBuffer pointer to the input data buffer
* @param BufferLength input data buffer length
* @retval uint32_t CRC (returned value LSBs for CRC shorter than 32 bits)
*/
static uint32_t CRC_Handle_8(CRC_HandleTypeDef *hcrc, uint8_t pBuffer[], uint32_t BufferLength)
{
uint32_t i = 0U; /* input data buffer index */
/* Processing time optimization: 4 bytes are entered in a row with a single word write,
* last bytes must be carefully fed to the CRC calculator to ensure a correct type
* handling by the IP */
for(i = 0U; i < (BufferLength/4U); i++)
{
hcrc->Instance->DR = ((uint32_t)pBuffer[4U*i]<<24U) | ((uint32_t)pBuffer[4U*i+1]<<16U) | ((uint32_t)pBuffer[4U*i+2]<<8U) | (uint32_t)pBuffer[4U*i+3];
}
/* last bytes specific handling */
if ((BufferLength%4U) != 0U)
{
if (BufferLength%4U == 1U)
{
*(uint8_t volatile*) (&hcrc->Instance->DR) = pBuffer[4*i];
}
if (BufferLength%4U == 2U)
{
*(uint16_t volatile*) (&hcrc->Instance->DR) = ((uint32_t)pBuffer[4*i]<<8) | (uint32_t)pBuffer[4*i+1];
}
if (BufferLength%4U == 3U)
{
*(uint16_t volatile*) (&hcrc->Instance->DR) = ((uint32_t)pBuffer[4*i]<<8) | (uint32_t)pBuffer[4*i+1];
*(uint8_t volatile*) (&hcrc->Instance->DR) = pBuffer[4*i+2];
}
}
/* Return the CRC computed value */
return hcrc->Instance->DR;
}
/**
* @brief Enter 16-bit input data to the CRC calculator.
* Specific data handling to optimize processing time.
* @param hcrc CRC handle
* @param pBuffer pointer to the input data buffer
* @param BufferLength input data buffer length
* @retval uint32_t CRC (returned value LSBs for CRC shorter than 32 bits)
*/
static uint32_t CRC_Handle_16(CRC_HandleTypeDef *hcrc, uint16_t pBuffer[], uint32_t BufferLength)
{
uint32_t i = 0U; /* input data buffer index */
/* Processing time optimization: 2 HalfWords are entered in a row with a single word write,
* in case of odd length, last HalfWord must be carefully fed to the CRC calculator to ensure
* a correct type handling by the IP */
for(i = 0U; i < (BufferLength/2U); i++)
{
hcrc->Instance->DR = ((uint32_t)pBuffer[2U*i]<<16U) | (uint32_t)pBuffer[2U*i+1];
}
if ((BufferLength%2U) != 0U)
{
*(uint16_t volatile*) (&hcrc->Instance->DR) = pBuffer[2*i];
}
/* Return the CRC computed value */
return hcrc->Instance->DR;
}
/**
* @}
*/
#endif /* HAL_CRC_MODULE_ENABLED */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/