klipper-dgus/klippy
Kevin O'Connor 780e3c3022 klippy: Return an error code if batch input results in an error
When reading from a debug input file, propagate any errors to the
program return status.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-06-16 16:18:01 -04:00
..
chelper stepcompress: Fix comment typo. 2018-06-04 09:41:55 -04:00
extras Extras: Probing does reply with the z position where the probe triggers. 2018-06-13 22:34:25 -04:00
cartesian.py gcode: Add minval/maxval/above/below options to get_X parsers 2018-04-20 22:24:36 -04:00
clocksync.py clocksync: Simplify is_active() check 2018-05-31 18:20:30 -04:00
console.py console: Report timestamp on each read message 2018-05-21 12:01:26 -04:00
corexy.py homing_override: Allow moves prior to homing an axis 2018-01-28 12:19:26 -05:00
delta.py stepper: Raise an error if position_endstop is not in min/max range 2018-05-18 19:41:03 -04:00
extruder.py extruder: Report max_extrude_ratio in log 2018-06-05 20:48:55 -04:00
gcode.py klippy: Return an error code if batch input results in an error 2018-06-16 16:18:01 -04:00
heater.py temperature_fan: Add support for temperature-triggered fan. 2018-05-10 19:32:23 -04:00
homing.py homing: Apply speed rounding after calling home_prepare() 2018-05-14 11:40:35 -04:00
klippy.py klippy: Return an error code if batch input results in an error 2018-06-16 16:18:01 -04:00
mathutil.py mathutil: Move coordinate_descent() to new file 2018-03-04 09:56:50 -05:00
mcu.py mcu: config_reset_cmd typo fixed 2018-06-01 09:49:55 -04:00
msgproto.py msgproto: Add support for a get_constant_int() method 2018-05-28 10:43:40 -04:00
parsedump.py build: Request python2 for all directly executed python binaries 2017-06-27 20:26:02 -04:00
pins.py lpc176x: Add support for GPIO pins 2018-05-25 11:52:13 -04:00
queuelogger.py klippy: Automatically clear rollover_info on each restart 2018-04-03 13:18:52 -04:00
reactor.py reactor: Fix bug causing end() to not always work 2017-04-13 13:20:13 -04:00
serialhdl.py serialqueue: Limit message transmission to available receive buffer size 2018-05-28 11:12:30 -04:00
stepper.py stepper: Add STEPPER_BUZZ command 2018-05-24 09:49:17 -04:00
toolhead.py toolhead: Add support for the M204 command 2018-06-15 12:05:45 -04:00
util.py util: Change the /tmp/printer pty to be group readable 2018-05-16 13:25:21 -04:00