mirror of https://github.com/Desuuuu/klipper.git
446 lines
20 KiB
Python
446 lines
20 KiB
Python
# TMC2130 configuration
|
|
#
|
|
# Copyright (C) 2018 Kevin O'Connor <kevin@koconnor.net>
|
|
#
|
|
# This file may be distributed under the terms of the GNU GPLv3 license.
|
|
import math, logging, collections
|
|
import bus
|
|
|
|
TMC_FREQUENCY=13200000.
|
|
|
|
Registers = {
|
|
"GCONF": 0x00, "GSTAT": 0x01, "IOIN": 0x04, "IHOLD_IRUN": 0x10,
|
|
"TPOWERDOWN": 0x11, "TSTEP": 0x12, "TPWMTHRS": 0x13, "TCOOLTHRS": 0x14,
|
|
"THIGH": 0x15, "XDIRECT": 0x2d, "MSLUT0": 0x60, "MSLUTSEL": 0x68,
|
|
"MSLUTSTART": 0x69, "MSCNT": 0x6a, "MSCURACT": 0x6b, "CHOPCONF": 0x6c,
|
|
"COOLCONF": 0x6d, "DCCTRL": 0x6e, "DRV_STATUS": 0x6f, "PWMCONF": 0x70,
|
|
"PWM_SCALE": 0x71, "ENCM_CTRL": 0x72, "LOST_STEPS": 0x73,
|
|
}
|
|
|
|
ReadRegisters = [
|
|
"GCONF", "GSTAT", "IOIN", "TSTEP", "XDIRECT", "MSCNT", "MSCURACT",
|
|
"CHOPCONF", "DRV_STATUS", "PWM_SCALE", "LOST_STEPS",
|
|
]
|
|
|
|
Fields = {}
|
|
Fields["GCONF"] = {
|
|
"I_scale_analog": 1<<0, "internal_Rsense": 1<<1, "en_pwm_mode": 1<<2,
|
|
"enc_commutation": 1<<3, "shaft": 1<<4, "diag0_error": 1<<5,
|
|
"diag0_otpw": 1<<6, "diag0_stall": 1<<7, "diag1_stall": 1<<8,
|
|
"diag1_index": 1<<9, "diag1_onstate": 1<<10, "diag1_steps_skipped": 1<<11,
|
|
"diag0_int_pushpull": 1<<12, "diag1_pushpull": 1<<13,
|
|
"small_hysteresis": 1<<14, "stop_enable": 1<<15, "direct_mode": 1<<16,
|
|
"test_mode": 1<<17
|
|
}
|
|
Fields["GSTAT"] = { "reset": 1<<0, "drv_err": 1<<1, "uv_cp": 1<<2 }
|
|
Fields["IOIN"] = {
|
|
"STEP": 1<<0, "DIR": 1<<1, "DCEN_CFG4": 1<<2, "DCIN_CFG5": 1<<3,
|
|
"DRV_ENN_CFG6": 1<<4, "DCO": 1<<5, "VERSION": 0xff << 24
|
|
}
|
|
Fields["IHOLD_IRUN"] = {
|
|
"IHOLD": 0x1f << 0, "IRUN": 0x1f << 8, "IHOLDDELAY": 0x0f << 16
|
|
}
|
|
Fields["TPOWERDOWN"] = { "TPOWERDOWN": 0xff }
|
|
Fields["TSTEP"] = { "TSTEP": 0xfffff }
|
|
Fields["TPWMTHRS"] = { "TPWMTHRS": 0xfffff }
|
|
Fields["TCOOLTHRS"] = { "TCOOLTHRS": 0xfffff }
|
|
Fields["THIGH"] = { "THIGH": 0xfffff }
|
|
Fields["MSCNT"] = { "MSCNT": 0x3ff }
|
|
Fields["MSCURACT"] = { "CUR_A": 0x1ff, "CUR_B": 0x1ff << 16 }
|
|
Fields["CHOPCONF"] = {
|
|
"toff": 0x0f, "hstrt": 0x07 << 4, "hend": 0x0f << 7, "fd3": 1<<11,
|
|
"disfdcc": 1<<12, "rndtf": 1<<13, "chm": 1<<14, "TBL": 0x03 << 15,
|
|
"vsense": 1<<17, "vhighfs": 1<<18, "vhighchm": 1<<19, "sync": 0x0f << 20,
|
|
"MRES": 0x0f << 24, "intpol": 1<<28, "dedge": 1<<29, "diss2g": 1<<30
|
|
}
|
|
Fields["COOLCONF"] = {
|
|
"semin": 0x0f, "seup": 0x03 << 5, "semax": 0x0f << 8, "sedn": 0x03 << 13,
|
|
"seimin": 1<<15, "sgt": 0x7f << 16, "sfilt": 1<<24
|
|
}
|
|
Fields["DRV_STATUS"] = {
|
|
"SG_RESULT": 0x3ff, "fsactive": 1<<15, "CS_ACTUAL": 0x1f << 16,
|
|
"stallGuard": 1<<24, "ot": 1<<25, "otpw": 1<<26, "s2ga": 1<<27,
|
|
"s2gb": 1<<28, "ola": 1<<29, "olb": 1<<30, "stst": 1<<31
|
|
}
|
|
Fields["PWMCONF"] = {
|
|
"PWM_AMPL": 0xff, "PWM_GRAD": 0xff << 8, "pwm_freq": 0x03 << 16,
|
|
"pwm_autoscale": 1<<18, "pwm_symmetric": 1<<19, "freewheel": 0x03 << 20
|
|
}
|
|
Fields["PWM_SCALE"] = { "PWM_SCALE": 0xff }
|
|
Fields["LOST_STEPS"] = { "LOST_STEPS": 0xfffff }
|
|
|
|
SignedFields = ["CUR_A", "CUR_B", "sgt"]
|
|
|
|
FieldFormatters = {
|
|
"I_scale_analog": (lambda v: "1(ExtVREF)" if v else ""),
|
|
"shaft": (lambda v: "1(Reverse)" if v else ""),
|
|
"drv_err": (lambda v: "1(ErrorShutdown!)" if v else ""),
|
|
"uv_cp": (lambda v: "1(Undervoltage!)" if v else ""),
|
|
"VERSION": (lambda v: "%#x" % v),
|
|
"MRES": (lambda v: "%d(%dusteps)" % (v, 0x100 >> v)),
|
|
"otpw": (lambda v: "1(OvertempWarning!)" if v else ""),
|
|
"ot": (lambda v: "1(OvertempError!)" if v else ""),
|
|
"s2ga": (lambda v: "1(ShortToGND_A!)" if v else ""),
|
|
"s2gb": (lambda v: "1(ShortToGND_B!)" if v else ""),
|
|
"ola": (lambda v: "1(OpenLoad_A!)" if v else ""),
|
|
"olb": (lambda v: "1(OpenLoad_B!)" if v else ""),
|
|
}
|
|
|
|
|
|
######################################################################
|
|
# Field helpers
|
|
######################################################################
|
|
|
|
# Return the position of the first bit set in a mask
|
|
def ffs(mask):
|
|
return (mask & -mask).bit_length() - 1
|
|
|
|
class FieldHelper:
|
|
def __init__(self, all_fields, signed_fields=[], field_formatters={},
|
|
registers=None):
|
|
self.all_fields = all_fields
|
|
self.signed_fields = {sf: 1 for sf in signed_fields}
|
|
self.field_formatters = field_formatters
|
|
self.registers = registers
|
|
if self.registers is None:
|
|
self.registers = {}
|
|
self.field_to_register = { f: r for r, fields in self.all_fields.items()
|
|
for f in fields }
|
|
def lookup_register(self, field_name, default=None):
|
|
return self.field_to_register.get(field_name, default)
|
|
def get_field(self, field_name, reg_value=None, reg_name=None):
|
|
# Returns value of the register field
|
|
if reg_name is None:
|
|
reg_name = self.field_to_register[field_name]
|
|
if reg_value is None:
|
|
reg_value = self.registers[reg_name]
|
|
mask = self.all_fields[reg_name][field_name]
|
|
field_value = (reg_value & mask) >> ffs(mask)
|
|
if field_name in self.signed_fields and ((reg_value & mask)<<1) > mask:
|
|
field_value -= (1 << field_value.bit_length())
|
|
return field_value
|
|
def set_field(self, field_name, field_value, reg_value=None, reg_name=None):
|
|
# Returns register value with field bits filled with supplied value
|
|
if reg_name is None:
|
|
reg_name = self.field_to_register[field_name]
|
|
if reg_value is None:
|
|
reg_value = self.registers.get(reg_name, 0)
|
|
mask = self.all_fields[reg_name][field_name]
|
|
new_value = (reg_value & ~mask) | ((field_value << ffs(mask)) & mask)
|
|
self.registers[reg_name] = new_value
|
|
return new_value
|
|
def set_config_field(self, config, field_name, default, config_name=None):
|
|
# Allow a field to be set from the config file
|
|
if config_name is None:
|
|
config_name = "driver_" + field_name.upper()
|
|
reg_name = self.field_to_register[field_name]
|
|
mask = self.all_fields[reg_name][field_name]
|
|
maxval = mask >> ffs(mask)
|
|
if maxval == 1:
|
|
val = config.getboolean(config_name, default)
|
|
elif field_name in self.signed_fields:
|
|
val = config.getint(config_name, default,
|
|
minval=-(maxval//2 + 1), maxval=maxval//2)
|
|
else:
|
|
val = config.getint(config_name, default, minval=0, maxval=maxval)
|
|
return self.set_field(field_name, val)
|
|
def pretty_format(self, reg_name, reg_value):
|
|
# Provide a string description of a register
|
|
reg_fields = self.all_fields.get(reg_name, {})
|
|
reg_fields = sorted([(mask, name) for name, mask in reg_fields.items()])
|
|
fields = []
|
|
for mask, field_name in reg_fields:
|
|
field_value = self.get_field(field_name, reg_value, reg_name)
|
|
sval = self.field_formatters.get(field_name, str)(field_value)
|
|
if sval and sval != "0":
|
|
fields.append(" %s=%s" % (field_name, sval))
|
|
return "%-11s %08x%s" % (reg_name + ":", reg_value, "".join(fields))
|
|
|
|
|
|
######################################################################
|
|
# G-Code command helpers
|
|
######################################################################
|
|
|
|
class TMCCommandHelper:
|
|
def __init__(self, config, mcu_tmc):
|
|
self.printer = config.get_printer()
|
|
self.name = config.get_name().split()[-1]
|
|
self.mcu_tmc = mcu_tmc
|
|
self.fields = mcu_tmc.get_fields()
|
|
self.query_registers = None
|
|
self.gcode = self.printer.lookup_object("gcode")
|
|
self.gcode.register_mux_command(
|
|
"SET_TMC_FIELD", "STEPPER", self.name,
|
|
self.cmd_SET_TMC_FIELD, desc=self.cmd_SET_TMC_FIELD_help)
|
|
self.gcode.register_mux_command(
|
|
"INIT_TMC", "STEPPER", self.name,
|
|
self.cmd_INIT_TMC, desc=self.cmd_INIT_TMC_help)
|
|
self.printer.register_event_handler("klippy:connect",
|
|
self._handle_connect)
|
|
def _init_registers(self, print_time):
|
|
# Send registers
|
|
for reg_name, val in self.fields.registers.items():
|
|
self.mcu_tmc.set_register(reg_name, val, print_time)
|
|
def _handle_connect(self):
|
|
try:
|
|
self._init_registers(0.)
|
|
except self.printer.command_error as e:
|
|
raise self.printer.config_error(str(e))
|
|
cmd_INIT_TMC_help = "Initialize TMC stepper driver registers"
|
|
def cmd_INIT_TMC(self, params):
|
|
logging.info("INIT_TMC %s", self.name)
|
|
print_time = self.printer.lookup_object('toolhead').get_last_move_time()
|
|
self._init_registers(print_time)
|
|
cmd_SET_TMC_FIELD_help = "Set a register field of a TMC driver"
|
|
def cmd_SET_TMC_FIELD(self, params):
|
|
if 'FIELD' not in params or 'VALUE' not in params:
|
|
raise self.gcode.error("Invalid command format")
|
|
field_name = self.gcode.get_str('FIELD', params)
|
|
reg_name = self.fields.lookup_register(field_name, None)
|
|
if reg_name is None:
|
|
raise self.gcode.error("Unknown field name '%s'" % (field_name,))
|
|
value = self.gcode.get_int('VALUE', params)
|
|
reg_val = self.fields.set_field(field_name, value)
|
|
print_time = self.printer.lookup_object('toolhead').get_last_move_time()
|
|
self.mcu_tmc.set_register(reg_name, reg_val, print_time)
|
|
# DUMP_TMC support
|
|
def setup_register_dump(self, query_registers):
|
|
self.query_registers = query_registers
|
|
self.gcode.register_mux_command(
|
|
"DUMP_TMC", "STEPPER", self.name,
|
|
self.cmd_DUMP_TMC, desc=self.cmd_DUMP_TMC_help)
|
|
cmd_DUMP_TMC_help = "Read and display TMC stepper driver registers"
|
|
def cmd_DUMP_TMC(self, params):
|
|
logging.info("DUMP_TMC %s", self.name)
|
|
print_time = self.printer.lookup_object('toolhead').get_last_move_time()
|
|
read_regs = self.query_registers(print_time)
|
|
read_regs_by_name = { reg_name: val for reg_name, val in read_regs }
|
|
self.gcode.respond_info("========== Write-only registers ==========")
|
|
for reg_name, val in self.fields.registers.items():
|
|
if reg_name not in read_regs_by_name:
|
|
self.gcode.respond_info(
|
|
self.fields.pretty_format(reg_name, val))
|
|
self.gcode.respond_info("========== Queried registers ==========")
|
|
for reg_name, val in read_regs:
|
|
self.gcode.respond_info(self.fields.pretty_format(reg_name, val))
|
|
|
|
|
|
######################################################################
|
|
# Config reading helpers
|
|
######################################################################
|
|
|
|
def current_bits(current, sense_resistor, vsense_on):
|
|
sense_resistor += 0.020
|
|
vsense = 0.32
|
|
if vsense_on:
|
|
vsense = 0.18
|
|
cs = int(32. * current * sense_resistor * math.sqrt(2.) / vsense - 1. + .5)
|
|
return max(0, min(31, cs))
|
|
|
|
def bits_to_current(bits, sense_resistor, vsense_on):
|
|
sense_resistor += 0.020
|
|
vsense = 0.32
|
|
if vsense_on:
|
|
vsense = 0.18
|
|
current = (bits + 1) * vsense / (32 * sense_resistor * math.sqrt(2.))
|
|
return round(current, 2)
|
|
|
|
def calc_current_config(run_current, hold_current, sense_resistor):
|
|
vsense = False
|
|
irun = current_bits(run_current, sense_resistor, vsense)
|
|
ihold = current_bits(hold_current, sense_resistor, vsense)
|
|
if irun < 16 and ihold < 16:
|
|
vsense = True
|
|
irun = current_bits(run_current, sense_resistor, vsense)
|
|
ihold = current_bits(hold_current, sense_resistor, vsense)
|
|
return vsense, irun, ihold
|
|
|
|
def get_config_current(config):
|
|
run_current = config.getfloat('run_current', above=0., maxval=2.)
|
|
hold_current = config.getfloat('hold_current', run_current,
|
|
above=0., maxval=2.)
|
|
sense_resistor = config.getfloat('sense_resistor', 0.110, above=0.)
|
|
vsense, irun, ihold = calc_current_config(
|
|
run_current, hold_current, sense_resistor)
|
|
return vsense, irun, ihold, sense_resistor
|
|
|
|
def get_config_microsteps(config):
|
|
steps = {'256': 0, '128': 1, '64': 2, '32': 3, '16': 4,
|
|
'8': 5, '4': 6, '2': 7, '1': 8}
|
|
return config.getchoice('microsteps', steps)
|
|
|
|
def get_config_stealthchop(config, tmc_freq):
|
|
mres = get_config_microsteps(config)
|
|
velocity = config.getfloat('stealthchop_threshold', 0., minval=0.)
|
|
if not velocity:
|
|
return mres, False, 0
|
|
stepper_name = " ".join(config.get_name().split()[1:])
|
|
stepper_config = config.getsection(stepper_name)
|
|
step_dist = stepper_config.getfloat('step_distance')
|
|
step_dist_256 = step_dist / (1 << mres)
|
|
threshold = int(tmc_freq * step_dist_256 / velocity + .5)
|
|
return mres, True, max(0, min(0xfffff, threshold))
|
|
|
|
|
|
######################################################################
|
|
# TMC2130 SPI
|
|
######################################################################
|
|
|
|
# Helper code for working with TMC devices via SPI
|
|
class MCU_TMC_SPI:
|
|
def __init__(self, config, name_to_reg, fields):
|
|
self.printer = config.get_printer()
|
|
self.spi = bus.MCU_SPI_from_config(config, 3, default_speed=4000000)
|
|
self.name_to_reg = name_to_reg
|
|
self.fields = fields
|
|
def get_fields(self):
|
|
return self.fields
|
|
def get_register(self, reg_name):
|
|
reg = self.name_to_reg[reg_name]
|
|
self.spi.spi_send([reg, 0x00, 0x00, 0x00, 0x00])
|
|
if self.printer.get_start_args().get('debugoutput') is not None:
|
|
return 0
|
|
params = self.spi.spi_transfer([reg, 0x00, 0x00, 0x00, 0x00])
|
|
pr = bytearray(params['response'])
|
|
return (pr[1] << 24) | (pr[2] << 16) | (pr[3] << 8) | pr[4]
|
|
def set_register(self, reg_name, val, print_time=0.):
|
|
min_clock = self.spi.get_mcu().print_time_to_clock(print_time)
|
|
reg = Registers[reg_name]
|
|
data = [(reg | 0x80) & 0xff, (val >> 24) & 0xff, (val >> 16) & 0xff,
|
|
(val >> 8) & 0xff, val & 0xff]
|
|
self.spi.spi_send(data, min_clock)
|
|
|
|
|
|
######################################################################
|
|
# TMC2130 printer object
|
|
######################################################################
|
|
|
|
class TMC2130:
|
|
def __init__(self, config):
|
|
self.printer = config.get_printer()
|
|
self.name = config.get_name().split()[-1]
|
|
# Setup mcu communication
|
|
self.regs = collections.OrderedDict()
|
|
self.fields = FieldHelper(Fields, SignedFields, FieldFormatters,
|
|
self.regs)
|
|
self.mcu_tmc = MCU_TMC_SPI(config, Registers, self.fields)
|
|
self.get_register = self.mcu_tmc.get_register
|
|
self.set_register = self.mcu_tmc.set_register
|
|
# Allow virtual endstop to be created
|
|
self.diag1_pin = config.get('diag1_pin', None)
|
|
ppins = self.printer.lookup_object("pins")
|
|
ppins.register_chip("tmc2130_" + self.name, self)
|
|
# Register commands
|
|
cmdhelper = TMCCommandHelper(config, self.mcu_tmc)
|
|
cmdhelper.setup_register_dump(self.query_registers)
|
|
gcode = self.printer.lookup_object("gcode")
|
|
gcode.register_mux_command(
|
|
"SET_TMC_CURRENT", "STEPPER", self.name,
|
|
self.cmd_SET_TMC_CURRENT, desc=self.cmd_SET_TMC_CURRENT_help)
|
|
# Setup basic register values
|
|
vsense, irun, ihold, self.sense_resistor = get_config_current(config)
|
|
self.fields.set_field("vsense", vsense)
|
|
self.fields.set_field("IHOLD", ihold)
|
|
self.fields.set_field("IRUN", irun)
|
|
mres, en_pwm, thresh = get_config_stealthchop(config, TMC_FREQUENCY)
|
|
self.fields.set_field("MRES", mres)
|
|
self.fields.set_field("en_pwm_mode", en_pwm)
|
|
self.fields.set_field("TPWMTHRS", thresh)
|
|
# Allow other registers to be set from the config
|
|
set_config_field = self.fields.set_config_field
|
|
set_config_field(config, "toff", 4)
|
|
set_config_field(config, "hstrt", 0)
|
|
set_config_field(config, "hend", 7)
|
|
set_config_field(config, "TBL", 1)
|
|
set_config_field(config, "intpol", True, "interpolate")
|
|
set_config_field(config, "IHOLDDELAY", 8)
|
|
set_config_field(config, "TPOWERDOWN", 0)
|
|
set_config_field(config, "PWM_AMPL", 128)
|
|
set_config_field(config, "PWM_GRAD", 4)
|
|
set_config_field(config, "pwm_freq", 1)
|
|
set_config_field(config, "pwm_autoscale", True)
|
|
set_config_field(config, "sgt", 0)
|
|
def setup_pin(self, pin_type, pin_params):
|
|
if pin_type != 'endstop' or pin_params['pin'] != 'virtual_endstop':
|
|
raise pins.error("tmc2130 virtual endstop only useful as endstop")
|
|
if pin_params['invert'] or pin_params['pullup']:
|
|
raise pins.error("Can not pullup/invert tmc2130 virtual endstop")
|
|
return TMC2130VirtualEndstop(self)
|
|
def query_registers(self, print_time=0.):
|
|
return [(reg_name, self.get_register(reg_name))
|
|
for reg_name in ReadRegisters]
|
|
def get_microsteps(self):
|
|
return 256 >> self.fields.get_field("MRES")
|
|
def get_phase(self):
|
|
mscnt = self.fields.get_field("MSCNT", self.get_register("MSCNT"))
|
|
return mscnt >> self.fields.get_field("MRES")
|
|
cmd_SET_TMC_CURRENT_help = "Set the current of a TMC2130 driver"
|
|
def cmd_SET_TMC_CURRENT(self, params):
|
|
gcode = self.printer.lookup_object('gcode')
|
|
vsense = bool(self.fields.get_field("vsense"))
|
|
if 'HOLDCURRENT' in params:
|
|
hold_current = gcode.get_float(
|
|
'HOLDCURRENT', params, above=0., maxval=2.)
|
|
else:
|
|
hold_current = bits_to_current(
|
|
self.fields.get_field("IHOLD"),
|
|
self.sense_resistor,
|
|
vsense)
|
|
if 'CURRENT' in params:
|
|
run_current = gcode.get_float(
|
|
'CURRENT', params, minval=hold_current, maxval=2.)
|
|
else:
|
|
run_current = bits_to_current(
|
|
self.fields.get_field("IRUN"),
|
|
self.sense_resistor,
|
|
vsense)
|
|
if 'HOLDCURRENT' in params or 'CURRENT' in params:
|
|
print_time = self.printer.lookup_object('toolhead')\
|
|
.get_last_move_time()
|
|
vsense_calc, irun, ihold = calc_current_config(run_current,
|
|
hold_current, self.sense_resistor)
|
|
if (vsense_calc != vsense):
|
|
self.fields.set_field("vsense", vsense_calc)
|
|
self.set_register("CHOPCONF", self.regs["CHOPCONF"], print_time)
|
|
self.fields.set_field("IHOLD", ihold)
|
|
self.fields.set_field("IRUN", irun)
|
|
self.set_register("IHOLD_IRUN", self.regs["IHOLD_IRUN"], print_time)
|
|
else:
|
|
gcode.respond_info(
|
|
"Run Current: %0.2fA Hold Current: %0.2fA"
|
|
% (run_current, hold_current))
|
|
|
|
# Endstop wrapper that enables tmc2130 "sensorless homing"
|
|
class TMC2130VirtualEndstop:
|
|
def __init__(self, tmc2130):
|
|
self.tmc2130 = tmc2130
|
|
if tmc2130.diag1_pin is None:
|
|
raise pins.error("tmc2130 virtual endstop requires diag1_pin")
|
|
ppins = tmc2130.printer.lookup_object('pins')
|
|
self.mcu_endstop = ppins.setup_pin('endstop', tmc2130.diag1_pin)
|
|
self.en_pwm = tmc2130.fields.get_field("en_pwm_mode")
|
|
# Wrappers
|
|
self.get_mcu = self.mcu_endstop.get_mcu
|
|
self.add_stepper = self.mcu_endstop.add_stepper
|
|
self.get_steppers = self.mcu_endstop.get_steppers
|
|
self.home_start = self.mcu_endstop.home_start
|
|
self.home_wait = self.mcu_endstop.home_wait
|
|
self.query_endstop = self.mcu_endstop.query_endstop
|
|
self.query_endstop_wait = self.mcu_endstop.query_endstop_wait
|
|
self.TimeoutError = self.mcu_endstop.TimeoutError
|
|
def home_prepare(self):
|
|
self.tmc2130.fields.set_field("en_pwm_mode", 0)
|
|
self.tmc2130.fields.set_field("diag1_stall", 1)
|
|
self.tmc2130.set_register("GCONF", self.tmc2130.regs['GCONF'])
|
|
self.tmc2130.set_register("TCOOLTHRS", 0xfffff)
|
|
self.mcu_endstop.home_prepare()
|
|
def home_finalize(self):
|
|
self.tmc2130.fields.set_field("en_pwm_mode", self.en_pwm)
|
|
self.tmc2130.fields.set_field("diag1_stall", 0)
|
|
self.tmc2130.set_register("GCONF", self.tmc2130.regs['GCONF'])
|
|
self.tmc2130.set_register("TCOOLTHRS", 0)
|
|
self.mcu_endstop.home_finalize()
|
|
|
|
def load_config_prefix(config):
|
|
return TMC2130(config)
|