klipper-dgus/klippy
Kevin O'Connor 5e6127869a mcu: Do not invert the direction of pullup pins by default
A pullup setting on an input pin (ie, '^') should enable the hardware
pullup resistor, but it should not invert the trigger level (ie, it
should remain trigger on high).  Those that need to change the trigger
level (ie, trigger on low) must now do that explicitly (ie, '^!').
This makes the code match what other firmwares do.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2016-11-08 09:29:38 -05:00
..
cartesian.py cartesian.py: Determine start step offset using last commanded position 2016-10-31 11:06:19 -04:00
chelper.py serialhdl: Calculate baudadjust from MCU's baud instead of host baud 2016-07-16 21:33:35 -04:00
console.py console: Update the debugging console to support setting local varables 2016-06-13 23:18:58 -04:00
extruder.py extruder: Don't do pressure advance on velocity changes due to cornering 2016-11-05 11:06:58 -04:00
fan.py mcu: Convert PWM and ADC objects to take mcu_time instead of clock 2016-08-24 15:16:02 -04:00
gcode.py gcode: Reset current position after an endstop error 2016-10-11 15:10:19 -04:00
heater.py heater: Do not require target temperature be above min_extrude_temp 2016-11-08 09:22:43 -05:00
homing.py cartesian: Enforce endstop min and max boundaries 2016-09-30 21:36:51 -04:00
klippy.py extruder: Create a new class and python file to track the printer extruder 2016-07-10 22:49:02 -04:00
list.h Initial commit of source code. 2016-05-25 11:37:40 -04:00
mcu.py mcu: Do not invert the direction of pullup pins by default 2016-11-08 09:29:38 -05:00
msgproto.py Initial commit of source code. 2016-05-25 11:37:40 -04:00
parsedump.py Initial commit of source code. 2016-05-25 11:37:40 -04:00
pins.py pins: Add Arduino Due pin name aliases 2016-06-14 15:41:18 -04:00
reactor.py Initial commit of source code. 2016-05-25 11:37:40 -04:00
serialhdl.py serialhdl: Calculate baudadjust from MCU's baud instead of host baud 2016-07-16 21:33:35 -04:00
serialqueue.c serialhdl: Calculate baudadjust from MCU's baud instead of host baud 2016-07-16 21:33:35 -04:00
serialqueue.h serialhdl: Calculate baudadjust from MCU's baud instead of host baud 2016-07-16 21:33:35 -04:00
stepcompress.c stepcompress: Do 32bit integer overflow checks internally in C code 2016-11-02 13:22:35 -04:00
stepper.py stepper: Return homing offset in steps instead of an absolute position 2016-10-13 10:09:56 -04:00
toolhead.py toolhead: Support calculation of cornering minimum and maximum 2016-11-05 10:59:36 -04:00
util.py Initial commit of source code. 2016-05-25 11:37:40 -04:00