Mirror
/
klipper-dgus
mirror of https://github.com/Desuuuu/klipper.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
klipper-dgus/config
History
Manuel Fichtner 5d52a3b19f
config: Anycubic Vyper (#4740) 
This commit contains a configuration for the Anycubic Vyper printer from 2021.
It uses a clone of the STM32F103 chip named GD32F103.
There are 2 Mainboard versions out there v0.0.5 and v0.0.6, this config has
been tested with the v0.0.6 only. It should probably work for v0.0.5 as well
since there are no different changes in the Anycubic Marlin firmware.
The LCD is not supported yet (might work, but didn't try yet).

Signed-off-by: Marc Neuhaus <marc@neuhaus.nrw>
Signed-off-by: Manuel Fichtner <manuel.fichtner@me.com>
 		2021-10-11 16:26:14 -04:00
..
example-cartesian.cfg config: Don't use arduino aliases in example-xxx.cfg files 2021-03-25 10:49:17 -04:00
example-corexy.cfg config: Don't use arduino aliases in example-xxx.cfg files 2021-03-25 10:49:17 -04:00
example-corexz.cfg config: Don't use arduino aliases in example-xxx.cfg files 2021-03-25 10:49:17 -04:00
example-delta.cfg config: Don't use arduino aliases in example-xxx.cfg files 2021-03-25 10:49:17 -04:00
example-extras.cfg config: Add dummy example.cfg and example-extras.cfg files 2020-11-28 12:09:03 -05:00
example-hybrid-corexy.cfg kinematics: Add hybrid-corexy and hybrid-corexz (#4229) 2021-05-03 14:31:23 -04:00
example-hybrid-corexz.cfg kinematics: Add hybrid-corexy and hybrid-corexz (#4229) 2021-05-03 14:31:23 -04:00
example-polar.cfg config: Don't use arduino aliases in example-xxx.cfg files 2021-03-25 10:49:17 -04:00
example-rotary-delta.cfg config: Don't use arduino aliases in example-xxx.cfg files 2021-03-25 10:49:17 -04:00
example-winch.cfg config: Don't use arduino aliases in example-xxx.cfg files 2021-03-25 10:49:17 -04:00
example.cfg config: Add dummy example.cfg and example-extras.cfg files 2020-11-28 12:09:03 -05:00
generic-archim2.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
generic-azteeg-x5-mini-v3.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
generic-bigtreetech-e3-rrf-v1.1.cfg config: Adds generic config for BigTreeTech SKR E3 RRF 1.1 2021-08-17 14:48:34 -04:00
generic-bigtreetech-gtr.cfg config: Use "stealthchop_threshold: 999999" if set 2021-05-09 09:02:43 -04:00
generic-bigtreetech-octopus.cfg config: Fix EXP2_10 alias in generic-bigtreetech-octopus.cfg 2021-09-21 13:42:52 -04:00
generic-bigtreetech-skr-2.cfg config: Document motor_power pin in skr2 config (#4677) 2021-09-15 18:58:30 -04:00
generic-bigtreetech-skr-cr6-v1.0.cfg config: Add generic-bigtreetech-skr-cr6-v1.0.cfg and fixes 2021-06-14 20:48:55 -04:00
generic-bigtreetech-skr-e3-dip.cfg config: Use "stealthchop_threshold: 999999" if set 2021-05-09 09:02:43 -04:00
generic-bigtreetech-skr-e3-turbo.cfg config: Use "stealthchop_threshold: 999999" if set 2021-05-09 09:02:43 -04:00
generic-bigtreetech-skr-mini-e3-v1.0.cfg config: Use "stealthchop_threshold: 999999" if set 2021-05-09 09:02:43 -04:00
generic-bigtreetech-skr-mini-e3-v1.2.cfg config: Use "stealthchop_threshold: 999999" if set 2021-05-09 09:02:43 -04:00
generic-bigtreetech-skr-mini-e3-v2.0.cfg config: Minor indentation changes to skr configs 2021-06-01 11:28:07 -04:00
generic-bigtreetech-skr-mini-mz.cfg config: Minor indentation changes to skr configs 2021-06-01 11:28:07 -04:00
generic-bigtreetech-skr-mini.cfg stm32: Simplify USB/Serial/CANbus Kconfig selection 2021-03-18 13:33:33 -04:00
generic-bigtreetech-skr-pro.cfg config: Use "stealthchop_threshold: 999999" if set 2021-05-09 09:02:43 -04:00
generic-bigtreetech-skr-v1.1.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
generic-bigtreetech-skr-v1.3.cfg config: Use "stealthchop_threshold: 999999" if set 2021-05-09 09:02:43 -04:00
generic-bigtreetech-skr-v1.4.cfg config: Use "stealthchop_threshold: 999999" if set 2021-05-09 09:02:43 -04:00
generic-cramps.cfg config: Do not use beagleboard aliases in example config files 2021-03-25 10:49:17 -04:00
generic-creality-v4.2.7.cfg config: Fix missing trailing commas in board_pins config sections 2021-08-19 17:10:54 -04:00
generic-creality-v4.2.10.cfg config: Minor changes to printer-creality-cr30-2021.cfg 2021-05-06 11:08:57 -04:00
generic-duet2-duex.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
generic-duet2-maestro.cfg config: Use "stealthchop_threshold: 999999" if set 2021-05-09 09:02:43 -04:00
generic-duet2.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
generic-duet3-mini.cfg config: Fix spi bus comment in generic-duet3-mini.cfg 2021-09-26 13:44:45 -04:00
generic-einsy-rambo.cfg config: Warn about prusa einsy boards in generic-einsy-rambo.cfg 2021-01-20 10:52:23 -05:00
generic-flyboard.cfg config: Use "stealthchop_threshold: 999999" if set 2021-05-09 09:02:43 -04:00
generic-fysetc-cheetah-v1.1.cfg config: Use "stealthchop_threshold: 999999" if set 2021-05-09 09:02:43 -04:00
generic-fysetc-cheetah-v1.2.cfg config: Update generic-fysetc-cheetah-v1.2.cfg (#4315) 2021-05-25 13:31:03 -04:00
generic-fysetc-f6.cfg config: Use "stealthchop_threshold: 999999" if set 2021-05-09 09:02:43 -04:00
generic-fysetc-s6-v2.cfg config: Use "stealthchop_threshold: 999999" if set 2021-05-09 09:02:43 -04:00
generic-fysetc-s6.cfg config: Use "stealthchop_threshold: 999999" if set 2021-05-09 09:02:43 -04:00
generic-fysetc-spider.cfg config: Use "stealthchop_threshold: 999999" if set 2021-05-09 09:02:43 -04:00
generic-gt2560.cfg config: Don't use arduino mega aliases in example config files 2021-03-25 10:49:17 -04:00
generic-mellow-super-infinty-hv.cfg config: Added the Mellow Super Infinity HV board (#4691) 2021-09-21 14:06:15 -04:00
generic-melzi.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
generic-mightyboard.cfg pca9533: RGB support for the mightyboard (#4150) 2021-04-09 17:47:16 -04:00
generic-mini-rambo.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
generic-minitronics1.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
generic-mks-robin-e3.cfg config: Fix missing trailing commas in board_pins config sections 2021-08-19 17:10:54 -04:00
generic-mks-robin-nano-v1.cfg stm32: Simplify USB/Serial/CANbus Kconfig selection 2021-03-18 13:33:33 -04:00
generic-mks-robin-nano-v2.cfg config: Fix extruder1 step_pin in Robin Nano V2 example (#4098) 2021-03-23 10:52:10 -04:00
generic-mks-robin-nano-v3.cfg config: fan pin number correction for Robin Nano 3 (#4005) 2021-02-28 16:17:21 -05:00
generic-mks-rumba32-v1.0.cfg config: Add generic-mks-rumba32-v1.0.cfg to tests 2021-02-11 18:23:42 -05:00
generic-mks-sgenl.cfg config: Use "stealthchop_threshold: 999999" if set 2021-05-09 09:02:43 -04:00
generic-printrboard-g2.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
generic-printrboard.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
generic-prusa-buddy.cfg config: Rename generic-buddy.cfg to generic-prusa-buddy.cfg 2021-06-14 12:40:36 -04:00
generic-radds.cfg config: Don't use arduino due aliases in example config files 2021-03-25 10:49:17 -04:00
generic-rambo.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
generic-ramps.cfg config: Don't use arduino mega aliases in example config files 2021-03-25 10:49:17 -04:00
generic-re-arm.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
generic-replicape.cfg config: Fix missing trailing commas in board_pins config sections 2021-08-19 17:10:54 -04:00
generic-rumba.cfg config: Don't use arduino mega aliases in example config files 2021-03-25 10:49:17 -04:00
generic-ruramps-v1.3.cfg config: Add generic-ruramps-v1.3.cfg to test cases and minor updates 2021-05-12 10:25:41 -04:00
generic-simulavr.cfg config: Don't use sanguino aliases in example config files 2021-03-25 10:49:17 -04:00
generic-smoothieboard.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
generic-th3d-ezboard-lite-v1.2.cfg config: Fixes for generic-th3d-ezboard-lite-v1.2.cfg 2021-06-08 21:29:52 -04:00
generic-ultimaker-ultimainboard-v2.cfg config: Change current scale on generic-ultimaker-ultimainboard-v2.cfg 2021-05-28 18:56:33 -04:00
kit-voron2-250mm.cfg config: Remove URLs to github repository 2021-09-23 19:45:22 -04:00
kit-zav3d-2019.cfg config: Don't use arduino mega aliases in example config files 2021-03-25 10:49:17 -04:00
printer-adimlab-2018.cfg config: Don't use arduino mega aliases in example config files 2021-03-25 10:49:17 -04:00
printer-alfawise-u30-2018.cfg stm32: Simplify USB/Serial/CANbus Kconfig selection 2021-03-18 13:33:33 -04:00
printer-anet-a4-2018.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-anet-a8-2017.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-anet-e10-2018.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-anet-e16-2019.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-anycubic-4max-2018.cfg config: Don't use arduino mega aliases in example config files 2021-03-25 10:49:17 -04:00
printer-anycubic-4maxpro-2.0-2021.cfg config: Config for Anycubic 4MaxPro_2.0-2021 (#4557) 2021-09-21 12:56:30 -04:00
printer-anycubic-i3-mega-2017.cfg config: Don't use arduino mega aliases in example config files 2021-03-25 10:49:17 -04:00
printer-anycubic-kossel-2016.cfg config: Don't use arduino mega aliases in example config files 2021-03-25 10:49:17 -04:00
printer-anycubic-kossel-plus-2017.cfg config: Don't use arduino mega aliases in example config files 2021-03-25 10:49:17 -04:00
printer-anycubic-vyper-2021.cfg config: Anycubic Vyper (#4740) 2021-10-11 16:26:14 -04:00
printer-creality-cr6se-2020.cfg stm32: Simplify USB/Serial/CANbus Kconfig selection 2021-03-18 13:33:33 -04:00
printer-creality-cr6se-2021.cfg config: Added Config For Creality CR6 SE With Board Revision 4.5.3 (#4147) 2021-04-22 21:13:54 -04:00
printer-creality-cr10-2017.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-creality-cr10mini-2017.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-creality-cr10s-2017.cfg config: Don't use arduino mega aliases in example config files 2021-03-25 10:49:17 -04:00
printer-creality-cr20-2018.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-creality-cr20-pro-2019.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-creality-cr30-2021.cfg config: Minor changes to printer-creality-cr30-2021.cfg 2021-05-06 11:08:57 -04:00
printer-creality-ender2-2017.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-creality-ender3-2018.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-creality-ender3-v2-2020.cfg stm32: Simplify USB/Serial/CANbus Kconfig selection 2021-03-18 13:33:33 -04:00
printer-creality-ender3max-2021.cfg config: Remove URLs to github repository 2021-09-23 19:45:22 -04:00
printer-creality-ender3pro-2020.cfg stm32: Simplify USB/Serial/CANbus Kconfig selection 2021-03-18 13:33:33 -04:00
printer-creality-ender5-2019.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-creality-ender5plus-2019.cfg config: Ender5Plus add filament sensor (#4031) 2021-03-14 22:04:45 -04:00
printer-creality-ender6-2020.cfg stm32: Simplify USB/Serial/CANbus Kconfig selection 2021-03-18 13:33:33 -04:00
printer-creality-sermoonD1-2021.cfg config: add support for creality sermoon D1 printer (#4621) 2021-09-25 12:17:02 -04:00
printer-elegoo-neptune2-v1.2-2021.cfg test: Add printer-elegoo-neptune2-v1.2-2021.cfg to printers.test 2021-08-31 13:12:15 -04:00
printer-eryone-er20-2021.cfg config: New printer profile for Eryone ER20 and minor update for Eryone Thinker Series (#4491) 2021-07-15 14:11:55 -04:00
printer-eryone-thinker-series-v2-2020.cfg config: Minor Eryone Thinker S config fixes. (#4695) 2021-09-21 14:12:58 -04:00
printer-flashforge-creator-pro-2018.cfg config: Add printer-flashforge-creator-pro-2018.cfg to test cases 2021-04-16 13:58:24 -04:00
printer-flsun-q5-2020.cfg config: Update printer-flsun-q5-2020.cfg (#4488) 2021-07-20 11:01:26 -04:00
printer-flsun-qqs-2020.cfg config: added a configuration file for FLSUN QQ-S Pro delta printer (#4237) 2021-06-27 18:27:39 -04:00
printer-fokoos-odin5-f3-2021.cfg config: Enable PID for bed heater in printer-fokoos-odin5-f3-2021.cfg (#4288) 2021-05-13 22:33:00 -04:00
printer-hiprecy-leo-2019.cfg config: Remove URLs to github repository 2021-09-23 19:45:22 -04:00
printer-longer-lk4-pro-2019.cfg config: Don't use arduino mega aliases in example config files 2021-03-25 10:49:17 -04:00
printer-lulzbot-mini1-2016.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-lulzbot-taz6-2017.cfg config: Updates to TAZ6 single extruder config (#3750) 2021-01-14 11:01:58 -05:00
printer-lulzbot-taz6-dual-v3-2017.cfg docs: Prefer Jinja2 "set" directive to default_parameter_xxx in examples 2021-04-26 12:44:51 -04:00
printer-makergear-m2-2012.cfg endstop_phase: Obtain phases directly from stepper microsteps config 2020-12-18 10:30:32 -05:00
printer-makergear-m2-2016.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-micromake-d1-2016.cfg config: Don't use arduino mega aliases in example config files 2021-03-25 10:49:17 -04:00
printer-monoprice-mini-delta-2017.cfg stm32: Simplify USB/Serial/CANbus Kconfig selection 2021-03-18 13:33:33 -04:00
printer-monoprice-select-mini-v2-2018.cfg stm32: Simplify USB/Serial/CANbus Kconfig selection 2021-03-18 13:33:33 -04:00
printer-mtw-create-2015.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-prusa-mini-plus-2020.cfg config: Update gear_ratio for Prusa Mini+ extruder based on counting teeth 2021-06-22 15:39:26 -04:00
printer-robo3d-r2-2017.cfg config: Update printer-robo3d-r2-2017.cfg 2021-03-27 12:55:17 -04:00
printer-seemecnc-rostock-max-v2-2015.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-sovol-sv01-2020.cfg config: Don't use arduino mega aliases in example config files 2021-03-25 10:49:17 -04:00
printer-sunlu-s8-2020.cfg config: Don't use arduino mega aliases in example config files 2021-03-25 10:49:17 -04:00
printer-tevo-flash-2018.cfg config: Don't use arduino mega aliases in example config files 2021-03-25 10:49:17 -04:00
printer-tevo-tarantula-pro-2020.cfg config: Don't use arduino mega aliases in example config files 2021-03-25 10:49:17 -04:00
printer-tronxy-p802e-2020.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-tronxy-p802m-2020.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-tronxy-x5s-2018.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-tronxy-x5sa-pro-2020.cfg config: Modify printer-tronxy-x5sa-pro-2020.cfg (#4330) 2021-06-02 10:48:24 -04:00
printer-tronxy-x5sa-v6-2019.cfg stm32: Simplify USB/Serial/CANbus Kconfig selection 2021-03-18 13:33:33 -04:00
printer-tronxy-x8-2018.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-twotrees-sapphire-plus-2020.cfg config: Fix rotation_distance for Sapphire Plus 2021-05-12 10:00:55 -04:00
printer-twotrees-sapphire-pro-2020.cfg config: Comment updates for recent "make menuconfig" updates 2021-03-29 20:00:26 -04:00
printer-velleman-k8200-2013.cfg config: Don't use arduino mega aliases in example config files 2021-03-25 10:49:17 -04:00
printer-velleman-k8800-2017.cfg config: Minor updates to printer-velleman-k8800-2017.cfg 2021-05-06 11:38:31 -04:00
printer-wanhao-duplicator-6-2016.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-wanhao-duplicator-9-2018.cfg config: Don't use arduino mega aliases in example config files 2021-03-25 10:49:17 -04:00
printer-wanhao-duplicator-i3-mini-2017.cfg config: Don't use arduino mega aliases in example config files 2021-03-25 10:49:17 -04:00
printer-wanhao-duplicator-i3-plus-2017.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-wanhao-duplicator-i3-plus-mark2-2019.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-wanhao-duplicator-i3-v2.1-2017.cfg config: Remove URLs to github repository 2021-09-23 19:45:22 -04:00
sample-aliases.cfg avr: Rename the analog-only PE0/PE1 pins on atmega168/328 to PE2/PE3 2021-08-14 22:00:17 -04:00
sample-bigtreetech-exp-mot.cfg config: Use "stealthchop_threshold: 999999" if set 2021-05-09 09:02:43 -04:00
sample-glyphs.cfg docs: Move config reference information to new Config_Reference.md 2020-11-18 20:10:21 -05:00
sample-idex.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
sample-lcd.cfg config: Add a note on wiring EXP1 to EXP3 on Creality 12864 displays 2021-05-28 11:55:18 -04:00
sample-macros.cfg config: Fix M300 beeper example. (#4480) 2021-07-20 11:00:11 -04:00
sample-mmu2s-diy.cfg config: Use "stealthchop_threshold: 999999" if set 2021-05-09 09:02:43 -04:00
sample-multi-extruder.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
sample-multi-mcu.cfg config: Don't use arduino aliases in example-xxx.cfg files 2021-03-25 10:49:17 -04:00
sample-probe-as-z-endstop.cfg docs: Move config reference information to new Config_Reference.md 2020-11-18 20:10:21 -05:00
sample-pwm-tool.cfg docs: Add referenced config example for PWM tools (#4537) 2021-09-03 18:10:09 -04:00
sample-raspberry-pi.cfg docs: Prefer Jinja2 "set" directive to default_parameter_xxx in examples 2021-04-26 12:44:51 -04:00