mirror of https://github.com/Desuuuu/klipper.git
47 lines
1.1 KiB
INI
47 lines
1.1 KiB
INI
# This file provides example config file settings for use on a printer
|
|
# that uses a Z probe instead of a traditional Z endstop switch. This
|
|
# file is just a "snippet" of config sections - it must be added to a
|
|
# config file containing the configuration of the rest of the printer.
|
|
|
|
# Be sure to review and update this config with the appropriate pins
|
|
# and coordinates for your printer.
|
|
|
|
# See docs/Config_Reference.md for a description of parameters.
|
|
|
|
# Define a probe
|
|
[probe]
|
|
pin: ar30
|
|
z_offset: 2.345
|
|
|
|
# Example settings to add to stepper_z section
|
|
[stepper_z]
|
|
endstop_pin: probe:z_virtual_endstop
|
|
position_min: -2 # The Z carriage may need to travel below the Z=0
|
|
# homing point if the bed has a significant tilt.
|
|
|
|
# The safe_z_home section modifies the default G28 behavior
|
|
[safe_z_home]
|
|
home_xy_position: 100,100
|
|
speed: 50
|
|
z_hop: 15
|
|
z_hop_speed: 5
|
|
|
|
# Example bed_tilt config section
|
|
[bed_tilt]
|
|
points:
|
|
100,100
|
|
10,10
|
|
10,100
|
|
10,190
|
|
100,10
|
|
100,190
|
|
190,10
|
|
190,100
|
|
190,190
|
|
|
|
# Example bed_mesh config section
|
|
[bed_mesh]
|
|
mesh_min: 20,20
|
|
mesh_max: 200,200
|
|
probe_count: 4,4
|