Kevin O'Connor 46355f903e toolhead: Don't clear sync_print_time on a get_next_move_time() call ... Only clear the internal sync_print_time flag if the code performs a regular "lazy" flush of the look-ahead queue. This helps build the look-ahead queue even when running internal scripts. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>		2018-10-15 18:24:15 -04:00
..
chelper	serialqueue: Increase receive message debug queue to 100 messages	2018-09-02 12:16:13 -04:00
extras	homing: Implement second home from homing.py	2018-10-10 12:14:27 -04:00
kinematics	homing: Move homing offset adjustment logic to generic homing code	2018-10-10 14:30:09 -04:00
clocksync.py	clocksync: Simplify is_active() check	2018-05-31 18:20:30 -04:00
configfile.py	configfile: add get_prefix_options method	2018-09-30 11:51:26 -04:00
console.py	console: Use reactor register_callback() mechanism	2018-09-02 12:31:36 -04:00
gcode.py	gcode: Report state message after any error in a STATUS response	2018-10-13 17:24:37 -04:00
heater.py	heater: Add new TURN_OFF_HEATERS command	2018-09-18 16:01:07 -04:00
homing.py	homing: Move homing offset adjustment logic to generic homing code	2018-10-10 14:30:09 -04:00
klippy.py	configfile: Move config file code from klippy.py to new file	2018-09-25 13:48:46 -04:00
mathutil.py	mathutil: Log starting error in coordinate_descent()	2018-07-24 08:32:35 -04:00
mcu.py	mcu: Add a set_commanded_position() method to MCU_stepper	2018-10-10 14:30:09 -04:00
msgproto.py	msgproto: Add support for a get_constant_int() method	2018-05-28 10:43:40 -04:00
parsedump.py	build: Request python2 for all directly executed python binaries	2017-06-27 20:26:02 -04:00
pins.py	pins: Verify the pin_map setting	2018-09-03 18:16:44 -04:00
queuelogger.py	klippy: Automatically clear rollover_info on each restart	2018-04-03 13:18:52 -04:00
reactor.py	reactor: Add ability to register callbacks	2018-06-30 14:13:47 -04:00
serialhdl.py	serialqueue: Limit message transmission to available receive buffer size	2018-05-28 11:12:30 -04:00
stepper.py	mcu: Add a set_commanded_position() method to MCU_stepper	2018-10-10 14:30:09 -04:00
toolhead.py	toolhead: Don't clear sync_print_time on a get_next_move_time() call	2018-10-15 18:24:15 -04:00
util.py	util: Change the /tmp/printer pty to be group readable	2018-05-16 13:25:21 -04:00