mirror of https://github.com/Desuuuu/klipper.git
356 lines
16 KiB
Python
356 lines
16 KiB
Python
# Z-Probe support
|
|
#
|
|
# Copyright (C) 2017-2019 Kevin O'Connor <kevin@koconnor.net>
|
|
#
|
|
# This file may be distributed under the terms of the GNU GPLv3 license.
|
|
import pins, homing, manual_probe
|
|
|
|
HINT_TIMEOUT = """
|
|
Make sure to home the printer before probing. If the probe
|
|
did not move far enough to trigger, then consider reducing
|
|
the Z axis minimum position so the probe can travel further
|
|
(the Z minimum position can be negative).
|
|
"""
|
|
|
|
class PrinterProbe:
|
|
def __init__(self, config, mcu_probe):
|
|
self.printer = config.get_printer()
|
|
self.name = config.get_name()
|
|
self.mcu_probe = mcu_probe
|
|
self.speed = config.getfloat('speed', 5.0)
|
|
self.x_offset = config.getfloat('x_offset', 0.)
|
|
self.y_offset = config.getfloat('y_offset', 0.)
|
|
self.z_offset = config.getfloat('z_offset')
|
|
self.probe_calibrate_z = 0.
|
|
# Infer Z position to move to during a probe
|
|
if config.has_section('stepper_z'):
|
|
zconfig = config.getsection('stepper_z')
|
|
self.z_position = zconfig.getfloat('position_min', 0.)
|
|
else:
|
|
pconfig = config.getsection('printer')
|
|
self.z_position = pconfig.getfloat('minimum_z_position', 0.)
|
|
# Multi-sample support (for improved accuracy)
|
|
self.sample_count = config.getint('samples', 1, minval=1)
|
|
self.sample_retract_dist = config.getfloat('sample_retract_dist', 2.,
|
|
above=0.)
|
|
atypes = {'median': 'median', 'average': 'average'}
|
|
self.samples_result = config.getchoice('samples_result', atypes,
|
|
'average')
|
|
self.samples_tolerance = config.getfloat('samples_tolerance', 0.100,
|
|
minval=0.)
|
|
self.samples_retries = config.getint('samples_tolerance_retries', 0,
|
|
minval=0)
|
|
# Register z_virtual_endstop pin
|
|
self.printer.lookup_object('pins').register_chip('probe', self)
|
|
# Register PROBE/QUERY_PROBE commands
|
|
self.gcode = self.printer.lookup_object('gcode')
|
|
self.gcode.register_command('PROBE', self.cmd_PROBE,
|
|
desc=self.cmd_PROBE_help)
|
|
self.gcode.register_command('QUERY_PROBE', self.cmd_QUERY_PROBE,
|
|
desc=self.cmd_QUERY_PROBE_help)
|
|
self.gcode.register_command('PROBE_CALIBRATE', self.cmd_PROBE_CALIBRATE,
|
|
desc=self.cmd_PROBE_CALIBRATE_help)
|
|
self.gcode.register_command('PROBE_ACCURACY', self.cmd_PROBE_ACCURACY,
|
|
desc=self.cmd_PROBE_ACCURACY_help)
|
|
def setup_pin(self, pin_type, pin_params):
|
|
if pin_type != 'endstop' or pin_params['pin'] != 'z_virtual_endstop':
|
|
raise pins.error("Probe virtual endstop only useful as endstop pin")
|
|
if pin_params['invert'] or pin_params['pullup']:
|
|
raise pins.error("Can not pullup/invert probe virtual endstop")
|
|
return self.mcu_probe
|
|
def get_offsets(self):
|
|
return self.x_offset, self.y_offset, self.z_offset
|
|
def _probe(self, speed):
|
|
toolhead = self.printer.lookup_object('toolhead')
|
|
homing_state = homing.Homing(self.printer)
|
|
pos = toolhead.get_position()
|
|
pos[2] = self.z_position
|
|
endstops = [(self.mcu_probe, "probe")]
|
|
verify = self.printer.get_start_args().get('debugoutput') is None
|
|
try:
|
|
homing_state.homing_move(pos, endstops, speed,
|
|
probe_pos=True, verify_movement=verify)
|
|
except homing.CommandError as e:
|
|
reason = str(e)
|
|
if "Timeout during endstop homing" in reason:
|
|
reason += HINT_TIMEOUT
|
|
raise homing.CommandError(reason)
|
|
pos = toolhead.get_position()
|
|
self.gcode.respond_info("probe at %.3f,%.3f is z=%.6f" % (
|
|
pos[0], pos[1], pos[2]))
|
|
self.gcode.reset_last_position()
|
|
return pos[:3]
|
|
def _move(self, coord, speed):
|
|
toolhead = self.printer.lookup_object('toolhead')
|
|
curpos = toolhead.get_position()
|
|
for i in range(len(coord)):
|
|
if coord[i] is not None:
|
|
curpos[i] = coord[i]
|
|
toolhead.move(curpos, speed)
|
|
self.gcode.reset_last_position()
|
|
def _calc_mean(self, positions):
|
|
count = float(len(positions))
|
|
return [sum([pos[i] for pos in positions]) / count
|
|
for i in range(3)]
|
|
def _calc_median(self, positions):
|
|
z_sorted = sorted(positions, key=(lambda p: p[2]))
|
|
middle = len(positions) // 2
|
|
if (len(positions) & 1) == 1:
|
|
# odd number of samples
|
|
return z_sorted[middle]
|
|
# even number of samples
|
|
return self._calc_mean(z_sorted[middle-1:middle+1])
|
|
def run_probe(self, params={}):
|
|
speed = self.gcode.get_float(
|
|
"PROBE_SPEED", params, self.speed, above=0.)
|
|
sample_count = self.gcode.get_int(
|
|
"SAMPLES", params, self.sample_count, minval=1)
|
|
sample_retract_dist = self.gcode.get_float(
|
|
"SAMPLE_RETRACT_DIST", params, self.sample_retract_dist, above=0.)
|
|
samples_tolerance = self.gcode.get_float(
|
|
"SAMPLES_TOLERANCE", params, self.samples_tolerance, minval=0.)
|
|
samples_retries = self.gcode.get_int(
|
|
"SAMPLES_TOLERANCE_RETRIES", params, self.samples_retries, minval=0)
|
|
samples_result = self.gcode.get_str(
|
|
"SAMPLES_RESULT", params, self.samples_result)
|
|
retries = 0
|
|
positions = []
|
|
while len(positions) < sample_count:
|
|
# Probe position
|
|
pos = self._probe(speed)
|
|
positions.append(pos)
|
|
# Check samples tolerance
|
|
z_positions = [p[2] for p in positions]
|
|
if max(z_positions) - min(z_positions) > samples_tolerance:
|
|
if retries >= samples_retries:
|
|
raise homing.CommandError(
|
|
"Probe samples exceed samples_tolerance")
|
|
self.gcode.respond_info(
|
|
"Probe samples exceed tolerance. Retrying...")
|
|
retries += 1
|
|
positions = []
|
|
# Retract
|
|
if len(positions) < sample_count:
|
|
liftpos = [None, None, pos[2] + sample_retract_dist]
|
|
self._move(liftpos, speed)
|
|
# Calculate and return result
|
|
if samples_result == 'median':
|
|
return self._calc_median(positions)
|
|
return self._calc_mean(positions)
|
|
cmd_PROBE_help = "Probe Z-height at current XY position"
|
|
def cmd_PROBE(self, params):
|
|
pos = self.run_probe(params)
|
|
self.gcode.respond_info("Result is z=%.6f" % (pos[2],))
|
|
cmd_QUERY_PROBE_help = "Return the status of the z-probe"
|
|
def cmd_QUERY_PROBE(self, params):
|
|
toolhead = self.printer.lookup_object('toolhead')
|
|
print_time = toolhead.get_last_move_time()
|
|
res = self.mcu_probe.query_endstop(print_time)
|
|
self.gcode.respond_info(
|
|
"probe: %s" % (["open", "TRIGGERED"][not not res],))
|
|
cmd_PROBE_ACCURACY_help = "Probe Z-height accuracy at current XY position"
|
|
def cmd_PROBE_ACCURACY(self, params):
|
|
speed = self.gcode.get_float(
|
|
"PROBE_SPEED", params, self.speed, above=0.)
|
|
sample_count = self.gcode.get_int("SAMPLES", params, 10, minval=1)
|
|
sample_retract_dist = self.gcode.get_float(
|
|
"SAMPLE_RETRACT_DIST", params, self.sample_retract_dist, above=0.)
|
|
toolhead = self.printer.lookup_object('toolhead')
|
|
pos = toolhead.get_position()
|
|
self.gcode.respond_info("PROBE_ACCURACY at X:%.3f Y:%.3f Z:%.3f"
|
|
" (samples=%d retract=%.3f speed=%.1f\n"
|
|
% (pos[0], pos[1], pos[2],
|
|
sample_count, sample_retract_dist, speed))
|
|
# Probe bed sample_count times
|
|
positions = []
|
|
while len(positions) < sample_count:
|
|
# Probe position
|
|
pos = self._probe(speed)
|
|
positions.append(pos)
|
|
# Retract
|
|
liftpos = [None, None, pos[2] + sample_retract_dist]
|
|
self._move(liftpos, speed)
|
|
# Calculate maximum, minimum and average values
|
|
max_value = max([p[2] for p in positions])
|
|
min_value = min([p[2] for p in positions])
|
|
range_value = max_value - min_value
|
|
avg_value = self._calc_mean(positions)[2]
|
|
median = self._calc_median(positions)[2]
|
|
# calculate the standard deviation
|
|
deviation_sum = 0
|
|
for i in range(len(positions)):
|
|
deviation_sum += pow(positions[i][2] - avg_value, 2.)
|
|
sigma = (deviation_sum / len(positions)) ** 0.5
|
|
# Show information
|
|
self.gcode.respond_info(
|
|
"probe accuracy results: maximum %.6f, minimum %.6f, range %.6f, "
|
|
"average %.6f, median %.6f, standard deviation %.6f" % (
|
|
max_value, min_value, range_value, avg_value, median, sigma))
|
|
def probe_calibrate_finalize(self, kin_pos):
|
|
if kin_pos is None:
|
|
return
|
|
z_offset = self.probe_calibrate_z - kin_pos[2]
|
|
self.gcode.respond_info(
|
|
"%s: z_offset: %.3f\n"
|
|
"The SAVE_CONFIG command will update the printer config file\n"
|
|
"with the above and restart the printer." % (self.name, z_offset))
|
|
configfile = self.printer.lookup_object('configfile')
|
|
configfile.set(self.name, 'z_offset', "%.3f" % (z_offset,))
|
|
cmd_PROBE_CALIBRATE_help = "Calibrate the probe's z_offset"
|
|
def cmd_PROBE_CALIBRATE(self, params):
|
|
manual_probe.verify_no_manual_probe(self.printer)
|
|
# Perform initial probe
|
|
curpos = self.run_probe(params)
|
|
# Move away from the bed
|
|
self.probe_calibrate_z = curpos[2]
|
|
curpos[2] += 5.
|
|
self._move(curpos, self.speed)
|
|
# Move the nozzle over the probe point
|
|
curpos[0] += self.x_offset
|
|
curpos[1] += self.y_offset
|
|
self._move(curpos, self.speed)
|
|
# Start manual probe
|
|
manual_probe.ManualProbeHelper(self.printer, params,
|
|
self.probe_calibrate_finalize)
|
|
|
|
# Endstop wrapper that enables probe specific features
|
|
class ProbeEndstopWrapper:
|
|
def __init__(self, config):
|
|
self.printer = config.get_printer()
|
|
self.gcode = self.printer.lookup_object('gcode')
|
|
self.position_endstop = config.getfloat('z_offset')
|
|
gcode_macro = self.printer.try_load_module(config, 'gcode_macro')
|
|
self.activate_gcode = gcode_macro.load_template(
|
|
config, 'activate_gcode', '')
|
|
self.deactivate_gcode = gcode_macro.load_template(
|
|
config, 'deactivate_gcode', '')
|
|
# Create an "endstop" object to handle the probe pin
|
|
ppins = self.printer.lookup_object('pins')
|
|
pin = config.get('pin')
|
|
pin_params = ppins.lookup_pin(pin, can_invert=True, can_pullup=True)
|
|
mcu = pin_params['chip']
|
|
mcu.register_config_callback(self._build_config)
|
|
self.mcu_endstop = mcu.setup_pin('endstop', pin_params)
|
|
# Wrappers
|
|
self.get_mcu = self.mcu_endstop.get_mcu
|
|
self.add_stepper = self.mcu_endstop.add_stepper
|
|
self.get_steppers = self.mcu_endstop.get_steppers
|
|
self.home_start = self.mcu_endstop.home_start
|
|
self.home_wait = self.mcu_endstop.home_wait
|
|
self.query_endstop = self.mcu_endstop.query_endstop
|
|
self.TimeoutError = self.mcu_endstop.TimeoutError
|
|
def _build_config(self):
|
|
kin = self.printer.lookup_object('toolhead').get_kinematics()
|
|
for stepper in kin.get_steppers('Z'):
|
|
self.add_stepper(stepper)
|
|
def home_prepare(self):
|
|
toolhead = self.printer.lookup_object('toolhead')
|
|
start_pos = toolhead.get_position()
|
|
self.activate_gcode.run_gcode_from_command()
|
|
if toolhead.get_position()[:3] != start_pos[:3]:
|
|
raise homing.CommandError(
|
|
"Toolhead moved during probe activate_gcode script")
|
|
self.mcu_endstop.home_prepare()
|
|
def home_finalize(self):
|
|
toolhead = self.printer.lookup_object('toolhead')
|
|
start_pos = toolhead.get_position()
|
|
self.deactivate_gcode.run_gcode_from_command()
|
|
if toolhead.get_position()[:3] != start_pos[:3]:
|
|
raise homing.CommandError(
|
|
"Toolhead moved during probe deactivate_gcode script")
|
|
self.mcu_endstop.home_finalize()
|
|
def get_position_endstop(self):
|
|
return self.position_endstop
|
|
|
|
# Helper code that can probe a series of points and report the
|
|
# position at each point.
|
|
class ProbePointsHelper:
|
|
def __init__(self, config, finalize_callback, default_points=None):
|
|
self.printer = config.get_printer()
|
|
self.finalize_callback = finalize_callback
|
|
self.probe_points = default_points
|
|
self.name = config.get_name()
|
|
self.gcode = self.printer.lookup_object('gcode')
|
|
# Read config settings
|
|
if default_points is None or config.get('points', None) is not None:
|
|
points = config.get('points').split('\n')
|
|
try:
|
|
points = [line.split(',', 1) for line in points if line.strip()]
|
|
self.probe_points = [(float(p[0].strip()), float(p[1].strip()))
|
|
for p in points]
|
|
except:
|
|
raise config.error("Unable to parse probe points in %s" % (
|
|
self.name))
|
|
self.horizontal_move_z = config.getfloat('horizontal_move_z', 5.)
|
|
self.speed = config.getfloat('speed', 50., above=0.)
|
|
# Internal probing state
|
|
self.lift_speed = self.speed
|
|
self.probe_offsets = (0., 0., 0.)
|
|
self.results = []
|
|
def minimum_points(self,n):
|
|
if len(self.probe_points) < n:
|
|
raise self.printer.config_error(
|
|
"Need at least %d probe points for %s" % (n, self.name))
|
|
def get_lift_speed(self):
|
|
return self.lift_speed
|
|
def _move_next(self):
|
|
toolhead = self.printer.lookup_object('toolhead')
|
|
# Lift toolhead
|
|
speed = self.lift_speed
|
|
if not self.results:
|
|
# Use full speed to first probe position
|
|
speed = self.speed
|
|
curpos = toolhead.get_position()
|
|
curpos[2] = self.horizontal_move_z
|
|
toolhead.move(curpos, speed)
|
|
# Check if done probing
|
|
if len(self.results) >= len(self.probe_points):
|
|
self.gcode.reset_last_position()
|
|
toolhead.get_last_move_time()
|
|
res = self.finalize_callback(self.probe_offsets, self.results)
|
|
if res != "retry":
|
|
return True
|
|
self.results = []
|
|
# Move to next XY probe point
|
|
curpos[:2] = self.probe_points[len(self.results)]
|
|
toolhead.move(curpos, self.speed)
|
|
self.gcode.reset_last_position()
|
|
return False
|
|
def start_probe(self, params):
|
|
manual_probe.verify_no_manual_probe(self.printer)
|
|
# Lookup objects
|
|
probe = self.printer.lookup_object('probe', None)
|
|
method = self.gcode.get_str('METHOD', params, 'automatic').lower()
|
|
self.results = []
|
|
if probe is None or method != 'automatic':
|
|
# Manual probe
|
|
self.lift_speed = self.speed
|
|
self.probe_offsets = (0., 0., 0.)
|
|
self._manual_probe_start()
|
|
return
|
|
# Perform automatic probing
|
|
self.lift_speed = min(self.speed, probe.speed)
|
|
self.probe_offsets = probe.get_offsets()
|
|
if self.horizontal_move_z < self.probe_offsets[2]:
|
|
raise self.gcode.error("horizontal_move_z can't be less than"
|
|
" probe's z_offset")
|
|
while 1:
|
|
done = self._move_next()
|
|
if done:
|
|
break
|
|
pos = probe.run_probe(params)
|
|
self.results.append(pos)
|
|
def _manual_probe_start(self):
|
|
done = self._move_next()
|
|
if not done:
|
|
manual_probe.ManualProbeHelper(self.printer, {},
|
|
self._manual_probe_finalize)
|
|
def _manual_probe_finalize(self, kin_pos):
|
|
if kin_pos is None:
|
|
return
|
|
self.results.append(kin_pos)
|
|
self._manual_probe_start()
|
|
|
|
def load_config(config):
|
|
return PrinterProbe(config, ProbeEndstopWrapper(config))
|