klipper-dgus/lib/sam4s/include/instance/tc1.h

121 lines
11 KiB
C

/* ---------------------------------------------------------------------------- */
/* Atmel Microcontroller Software Support */
/* SAM Software Package License */
/* ---------------------------------------------------------------------------- */
/* Copyright (c) %copyright_year%, Atmel Corporation */
/* */
/* All rights reserved. */
/* */
/* Redistribution and use in source and binary forms, with or without */
/* modification, are permitted provided that the following condition is met: */
/* */
/* - Redistributions of source code must retain the above copyright notice, */
/* this list of conditions and the disclaimer below. */
/* */
/* Atmel's name may not be used to endorse or promote products derived from */
/* this software without specific prior written permission. */
/* */
/* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR */
/* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF */
/* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE */
/* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, */
/* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT */
/* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, */
/* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF */
/* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING */
/* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */
/* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */
/* ---------------------------------------------------------------------------- */
#ifndef _SAM4S_TC1_INSTANCE_
#define _SAM4S_TC1_INSTANCE_
/* ========== Register definition for TC1 peripheral ========== */
#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
#define REG_TC1_CCR0 (0x40014000U) /**< \brief (TC1) Channel Control Register (channel = 0) */
#define REG_TC1_CMR0 (0x40014004U) /**< \brief (TC1) Channel Mode Register (channel = 0) */
#define REG_TC1_SMMR0 (0x40014008U) /**< \brief (TC1) Stepper Motor Mode Register (channel = 0) */
#define REG_TC1_CV0 (0x40014010U) /**< \brief (TC1) Counter Value (channel = 0) */
#define REG_TC1_RA0 (0x40014014U) /**< \brief (TC1) Register A (channel = 0) */
#define REG_TC1_RB0 (0x40014018U) /**< \brief (TC1) Register B (channel = 0) */
#define REG_TC1_RC0 (0x4001401CU) /**< \brief (TC1) Register C (channel = 0) */
#define REG_TC1_SR0 (0x40014020U) /**< \brief (TC1) Status Register (channel = 0) */
#define REG_TC1_IER0 (0x40014024U) /**< \brief (TC1) Interrupt Enable Register (channel = 0) */
#define REG_TC1_IDR0 (0x40014028U) /**< \brief (TC1) Interrupt Disable Register (channel = 0) */
#define REG_TC1_IMR0 (0x4001402CU) /**< \brief (TC1) Interrupt Mask Register (channel = 0) */
#define REG_TC1_CCR1 (0x40014040U) /**< \brief (TC1) Channel Control Register (channel = 1) */
#define REG_TC1_CMR1 (0x40014044U) /**< \brief (TC1) Channel Mode Register (channel = 1) */
#define REG_TC1_SMMR1 (0x40014048U) /**< \brief (TC1) Stepper Motor Mode Register (channel = 1) */
#define REG_TC1_CV1 (0x40014050U) /**< \brief (TC1) Counter Value (channel = 1) */
#define REG_TC1_RA1 (0x40014054U) /**< \brief (TC1) Register A (channel = 1) */
#define REG_TC1_RB1 (0x40014058U) /**< \brief (TC1) Register B (channel = 1) */
#define REG_TC1_RC1 (0x4001405CU) /**< \brief (TC1) Register C (channel = 1) */
#define REG_TC1_SR1 (0x40014060U) /**< \brief (TC1) Status Register (channel = 1) */
#define REG_TC1_IER1 (0x40014064U) /**< \brief (TC1) Interrupt Enable Register (channel = 1) */
#define REG_TC1_IDR1 (0x40014068U) /**< \brief (TC1) Interrupt Disable Register (channel = 1) */
#define REG_TC1_IMR1 (0x4001406CU) /**< \brief (TC1) Interrupt Mask Register (channel = 1) */
#define REG_TC1_CCR2 (0x40014080U) /**< \brief (TC1) Channel Control Register (channel = 2) */
#define REG_TC1_CMR2 (0x40014084U) /**< \brief (TC1) Channel Mode Register (channel = 2) */
#define REG_TC1_SMMR2 (0x40014088U) /**< \brief (TC1) Stepper Motor Mode Register (channel = 2) */
#define REG_TC1_CV2 (0x40014090U) /**< \brief (TC1) Counter Value (channel = 2) */
#define REG_TC1_RA2 (0x40014094U) /**< \brief (TC1) Register A (channel = 2) */
#define REG_TC1_RB2 (0x40014098U) /**< \brief (TC1) Register B (channel = 2) */
#define REG_TC1_RC2 (0x4001409CU) /**< \brief (TC1) Register C (channel = 2) */
#define REG_TC1_SR2 (0x400140A0U) /**< \brief (TC1) Status Register (channel = 2) */
#define REG_TC1_IER2 (0x400140A4U) /**< \brief (TC1) Interrupt Enable Register (channel = 2) */
#define REG_TC1_IDR2 (0x400140A8U) /**< \brief (TC1) Interrupt Disable Register (channel = 2) */
#define REG_TC1_IMR2 (0x400140ACU) /**< \brief (TC1) Interrupt Mask Register (channel = 2) */
#define REG_TC1_BCR (0x400140C0U) /**< \brief (TC1) Block Control Register */
#define REG_TC1_BMR (0x400140C4U) /**< \brief (TC1) Block Mode Register */
#define REG_TC1_QIER (0x400140C8U) /**< \brief (TC1) QDEC Interrupt Enable Register */
#define REG_TC1_QIDR (0x400140CCU) /**< \brief (TC1) QDEC Interrupt Disable Register */
#define REG_TC1_QIMR (0x400140D0U) /**< \brief (TC1) QDEC Interrupt Mask Register */
#define REG_TC1_QISR (0x400140D4U) /**< \brief (TC1) QDEC Interrupt Status Register */
#define REG_TC1_FMR (0x400140D8U) /**< \brief (TC1) Fault Mode Register */
#define REG_TC1_WPMR (0x400140E4U) /**< \brief (TC1) Write Protection Mode Register */
#else
#define REG_TC1_CCR0 (*(__O uint32_t*)0x40014000U) /**< \brief (TC1) Channel Control Register (channel = 0) */
#define REG_TC1_CMR0 (*(__IO uint32_t*)0x40014004U) /**< \brief (TC1) Channel Mode Register (channel = 0) */
#define REG_TC1_SMMR0 (*(__IO uint32_t*)0x40014008U) /**< \brief (TC1) Stepper Motor Mode Register (channel = 0) */
#define REG_TC1_CV0 (*(__I uint32_t*)0x40014010U) /**< \brief (TC1) Counter Value (channel = 0) */
#define REG_TC1_RA0 (*(__IO uint32_t*)0x40014014U) /**< \brief (TC1) Register A (channel = 0) */
#define REG_TC1_RB0 (*(__IO uint32_t*)0x40014018U) /**< \brief (TC1) Register B (channel = 0) */
#define REG_TC1_RC0 (*(__IO uint32_t*)0x4001401CU) /**< \brief (TC1) Register C (channel = 0) */
#define REG_TC1_SR0 (*(__I uint32_t*)0x40014020U) /**< \brief (TC1) Status Register (channel = 0) */
#define REG_TC1_IER0 (*(__O uint32_t*)0x40014024U) /**< \brief (TC1) Interrupt Enable Register (channel = 0) */
#define REG_TC1_IDR0 (*(__O uint32_t*)0x40014028U) /**< \brief (TC1) Interrupt Disable Register (channel = 0) */
#define REG_TC1_IMR0 (*(__I uint32_t*)0x4001402CU) /**< \brief (TC1) Interrupt Mask Register (channel = 0) */
#define REG_TC1_CCR1 (*(__O uint32_t*)0x40014040U) /**< \brief (TC1) Channel Control Register (channel = 1) */
#define REG_TC1_CMR1 (*(__IO uint32_t*)0x40014044U) /**< \brief (TC1) Channel Mode Register (channel = 1) */
#define REG_TC1_SMMR1 (*(__IO uint32_t*)0x40014048U) /**< \brief (TC1) Stepper Motor Mode Register (channel = 1) */
#define REG_TC1_CV1 (*(__I uint32_t*)0x40014050U) /**< \brief (TC1) Counter Value (channel = 1) */
#define REG_TC1_RA1 (*(__IO uint32_t*)0x40014054U) /**< \brief (TC1) Register A (channel = 1) */
#define REG_TC1_RB1 (*(__IO uint32_t*)0x40014058U) /**< \brief (TC1) Register B (channel = 1) */
#define REG_TC1_RC1 (*(__IO uint32_t*)0x4001405CU) /**< \brief (TC1) Register C (channel = 1) */
#define REG_TC1_SR1 (*(__I uint32_t*)0x40014060U) /**< \brief (TC1) Status Register (channel = 1) */
#define REG_TC1_IER1 (*(__O uint32_t*)0x40014064U) /**< \brief (TC1) Interrupt Enable Register (channel = 1) */
#define REG_TC1_IDR1 (*(__O uint32_t*)0x40014068U) /**< \brief (TC1) Interrupt Disable Register (channel = 1) */
#define REG_TC1_IMR1 (*(__I uint32_t*)0x4001406CU) /**< \brief (TC1) Interrupt Mask Register (channel = 1) */
#define REG_TC1_CCR2 (*(__O uint32_t*)0x40014080U) /**< \brief (TC1) Channel Control Register (channel = 2) */
#define REG_TC1_CMR2 (*(__IO uint32_t*)0x40014084U) /**< \brief (TC1) Channel Mode Register (channel = 2) */
#define REG_TC1_SMMR2 (*(__IO uint32_t*)0x40014088U) /**< \brief (TC1) Stepper Motor Mode Register (channel = 2) */
#define REG_TC1_CV2 (*(__I uint32_t*)0x40014090U) /**< \brief (TC1) Counter Value (channel = 2) */
#define REG_TC1_RA2 (*(__IO uint32_t*)0x40014094U) /**< \brief (TC1) Register A (channel = 2) */
#define REG_TC1_RB2 (*(__IO uint32_t*)0x40014098U) /**< \brief (TC1) Register B (channel = 2) */
#define REG_TC1_RC2 (*(__IO uint32_t*)0x4001409CU) /**< \brief (TC1) Register C (channel = 2) */
#define REG_TC1_SR2 (*(__I uint32_t*)0x400140A0U) /**< \brief (TC1) Status Register (channel = 2) */
#define REG_TC1_IER2 (*(__O uint32_t*)0x400140A4U) /**< \brief (TC1) Interrupt Enable Register (channel = 2) */
#define REG_TC1_IDR2 (*(__O uint32_t*)0x400140A8U) /**< \brief (TC1) Interrupt Disable Register (channel = 2) */
#define REG_TC1_IMR2 (*(__I uint32_t*)0x400140ACU) /**< \brief (TC1) Interrupt Mask Register (channel = 2) */
#define REG_TC1_BCR (*(__O uint32_t*)0x400140C0U) /**< \brief (TC1) Block Control Register */
#define REG_TC1_BMR (*(__IO uint32_t*)0x400140C4U) /**< \brief (TC1) Block Mode Register */
#define REG_TC1_QIER (*(__O uint32_t*)0x400140C8U) /**< \brief (TC1) QDEC Interrupt Enable Register */
#define REG_TC1_QIDR (*(__O uint32_t*)0x400140CCU) /**< \brief (TC1) QDEC Interrupt Disable Register */
#define REG_TC1_QIMR (*(__I uint32_t*)0x400140D0U) /**< \brief (TC1) QDEC Interrupt Mask Register */
#define REG_TC1_QISR (*(__I uint32_t*)0x400140D4U) /**< \brief (TC1) QDEC Interrupt Status Register */
#define REG_TC1_FMR (*(__IO uint32_t*)0x400140D8U) /**< \brief (TC1) Fault Mode Register */
#define REG_TC1_WPMR (*(__IO uint32_t*)0x400140E4U) /**< \brief (TC1) Write Protection Mode Register */
#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#endif /* _SAM4S_TC1_INSTANCE_ */