mirror of https://github.com/Desuuuu/klipper.git
1805 lines
62 KiB
C
1805 lines
62 KiB
C
/**
|
|
******************************************************************************
|
|
* @file stm32f1xx_hal_nand.c
|
|
* @author MCD Application Team
|
|
* @version V1.1.1
|
|
* @date 12-May-2017
|
|
* @brief NAND HAL module driver.
|
|
* This file provides a generic firmware to drive NAND memories mounted
|
|
* as external device.
|
|
*
|
|
@verbatim
|
|
==============================================================================
|
|
##### How to use this driver #####
|
|
==============================================================================
|
|
[..]
|
|
This driver is a generic layered driver which contains a set of APIs used to
|
|
control NAND flash memories. It uses the FSMC layer functions to interface
|
|
with NAND devices. This driver is used as follows:
|
|
|
|
(+) NAND flash memory configuration sequence using the function HAL_NAND_Init()
|
|
with control and timing parameters for both common and attribute spaces.
|
|
|
|
(+) Read NAND flash memory maker and device IDs using the function
|
|
HAL_NAND_Read_ID(). The read information is stored in the NAND_ID_TypeDef
|
|
structure declared by the function caller.
|
|
|
|
(+) Access NAND flash memory by read/write operations using the functions
|
|
HAL_NAND_Read_Page_8b()/HAL_NAND_Read_SpareArea_8b(),
|
|
HAL_NAND_Write_Page_8b()/HAL_NAND_Write_SpareArea_8b(),
|
|
HAL_NAND_Read_Page_16b()/HAL_NAND_Read_SpareArea_16b(),
|
|
HAL_NAND_Write_Page_16b()/HAL_NAND_Write_SpareArea_16b()
|
|
to read/write page(s)/spare area(s). These functions use specific device
|
|
information (Block, page size..) predefined by the user in the NAND_DeviceConfigTypeDef
|
|
structure. The read/write address information is contained by the Nand_Address_Typedef
|
|
structure passed as parameter.
|
|
|
|
(+) Perform NAND flash Reset chip operation using the function HAL_NAND_Reset().
|
|
|
|
(+) Perform NAND flash erase block operation using the function HAL_NAND_Erase_Block().
|
|
The erase block address information is contained in the Nand_Address_Typedef
|
|
structure passed as parameter.
|
|
|
|
(+) Read the NAND flash status operation using the function HAL_NAND_Read_Status().
|
|
|
|
(+) You can also control the NAND device by calling the control APIs HAL_NAND_ECC_Enable()/
|
|
HAL_NAND_ECC_Disable() to respectively enable/disable the ECC code correction
|
|
feature or the function HAL_NAND_GetECC() to get the ECC correction code.
|
|
|
|
(+) You can monitor the NAND device HAL state by calling the function
|
|
HAL_NAND_GetState()
|
|
|
|
[..]
|
|
(@) This driver is a set of generic APIs which handle standard NAND flash operations.
|
|
If a NAND flash device contains different operations and/or implementations,
|
|
it should be implemented separately.
|
|
|
|
@endverbatim
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32f1xx_hal.h"
|
|
|
|
/** @addtogroup STM32F1xx_HAL_Driver
|
|
* @{
|
|
*/
|
|
|
|
#ifdef HAL_NAND_MODULE_ENABLED
|
|
|
|
#if defined (STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG) || defined(STM32F103xG)
|
|
|
|
/** @defgroup NAND NAND
|
|
* @brief NAND HAL module driver
|
|
* @{
|
|
*/
|
|
|
|
/* Private typedef -----------------------------------------------------------*/
|
|
/* Private define ------------------------------------------------------------*/
|
|
/** @defgroup NAND_Private_Constants NAND Private Constants
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Private macro -------------------------------------------------------------*/
|
|
/** @defgroup NAND_Private_Macros NAND Private Macros
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Private variables ---------------------------------------------------------*/
|
|
/* Private function prototypes -----------------------------------------------*/
|
|
/* Exported functions --------------------------------------------------------*/
|
|
/** @defgroup NAND_Exported_Functions NAND Exported Functions
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup NAND_Exported_Functions_Group1 Initialization and de-initialization functions
|
|
* @brief Initialization and Configuration functions
|
|
*
|
|
@verbatim
|
|
==============================================================================
|
|
##### NAND Initialization and de-initialization functions #####
|
|
==============================================================================
|
|
[..]
|
|
This section provides functions allowing to initialize/de-initialize
|
|
the NAND memory
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Perform NAND memory Initialization sequence
|
|
* @param hnand: pointer to a NAND_HandleTypeDef structure that contains
|
|
* the configuration information for NAND module.
|
|
* @param ComSpace_Timing: pointer to Common space timing structure
|
|
* @param AttSpace_Timing: pointer to Attribute space timing structure
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_NAND_Init(NAND_HandleTypeDef *hnand, FSMC_NAND_PCC_TimingTypeDef *ComSpace_Timing, FSMC_NAND_PCC_TimingTypeDef *AttSpace_Timing)
|
|
{
|
|
/* Check the NAND handle state */
|
|
if(hnand == NULL)
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
if(hnand->State == HAL_NAND_STATE_RESET)
|
|
{
|
|
/* Allocate lock resource and initialize it */
|
|
hnand->Lock = HAL_UNLOCKED;
|
|
/* Initialize the low level hardware (MSP) */
|
|
HAL_NAND_MspInit(hnand);
|
|
}
|
|
|
|
/* Initialize NAND control Interface */
|
|
FSMC_NAND_Init(hnand->Instance, &(hnand->Init));
|
|
|
|
/* Initialize NAND common space timing Interface */
|
|
FSMC_NAND_CommonSpace_Timing_Init(hnand->Instance, ComSpace_Timing, hnand->Init.NandBank);
|
|
|
|
/* Initialize NAND attribute space timing Interface */
|
|
FSMC_NAND_AttributeSpace_Timing_Init(hnand->Instance, AttSpace_Timing, hnand->Init.NandBank);
|
|
|
|
/* Enable the NAND device */
|
|
__FSMC_NAND_ENABLE(hnand->Instance, hnand->Init.NandBank);
|
|
|
|
/* Update the NAND controller state */
|
|
hnand->State = HAL_NAND_STATE_READY;
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Perform NAND memory De-Initialization sequence
|
|
* @param hnand: pointer to a NAND_HandleTypeDef structure that contains
|
|
* the configuration information for NAND module.
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_NAND_DeInit(NAND_HandleTypeDef *hnand)
|
|
{
|
|
/* Initialize the low level hardware (MSP) */
|
|
HAL_NAND_MspDeInit(hnand);
|
|
|
|
/* Configure the NAND registers with their reset values */
|
|
FSMC_NAND_DeInit(hnand->Instance, hnand->Init.NandBank);
|
|
|
|
/* Reset the NAND controller state */
|
|
hnand->State = HAL_NAND_STATE_RESET;
|
|
|
|
/* Release Lock */
|
|
__HAL_UNLOCK(hnand);
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief NAND MSP Init
|
|
* @param hnand: pointer to a NAND_HandleTypeDef structure that contains
|
|
* the configuration information for NAND module.
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_NAND_MspInit(NAND_HandleTypeDef *hnand)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hnand);
|
|
/* NOTE : This function Should not be modified, when the callback is needed,
|
|
the HAL_NAND_MspInit could be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @brief NAND MSP DeInit
|
|
* @param hnand: pointer to a NAND_HandleTypeDef structure that contains
|
|
* the configuration information for NAND module.
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_NAND_MspDeInit(NAND_HandleTypeDef *hnand)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hnand);
|
|
/* NOTE : This function Should not be modified, when the callback is needed,
|
|
the HAL_NAND_MspDeInit could be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
|
|
/**
|
|
* @brief This function handles NAND device interrupt request.
|
|
* @param hnand: pointer to a NAND_HandleTypeDef structure that contains
|
|
* the configuration information for NAND module.
|
|
* @retval HAL status
|
|
*/
|
|
void HAL_NAND_IRQHandler(NAND_HandleTypeDef *hnand)
|
|
{
|
|
/* Check NAND interrupt Rising edge flag */
|
|
if(__FSMC_NAND_GET_FLAG(hnand->Instance, hnand->Init.NandBank, FSMC_FLAG_RISING_EDGE))
|
|
{
|
|
/* NAND interrupt callback*/
|
|
HAL_NAND_ITCallback(hnand);
|
|
|
|
/* Clear NAND interrupt Rising edge pending bit */
|
|
__FSMC_NAND_CLEAR_FLAG(hnand->Instance, hnand->Init.NandBank, FSMC_FLAG_RISING_EDGE);
|
|
}
|
|
|
|
/* Check NAND interrupt Level flag */
|
|
if(__FSMC_NAND_GET_FLAG(hnand->Instance, hnand->Init.NandBank, FSMC_FLAG_LEVEL))
|
|
{
|
|
/* NAND interrupt callback*/
|
|
HAL_NAND_ITCallback(hnand);
|
|
|
|
/* Clear NAND interrupt Level pending bit */
|
|
__FSMC_NAND_CLEAR_FLAG(hnand->Instance, hnand->Init.NandBank, FSMC_FLAG_LEVEL);
|
|
}
|
|
|
|
/* Check NAND interrupt Falling edge flag */
|
|
if(__FSMC_NAND_GET_FLAG(hnand->Instance, hnand->Init.NandBank, FSMC_FLAG_FALLING_EDGE))
|
|
{
|
|
/* NAND interrupt callback*/
|
|
HAL_NAND_ITCallback(hnand);
|
|
|
|
/* Clear NAND interrupt Falling edge pending bit */
|
|
__FSMC_NAND_CLEAR_FLAG(hnand->Instance, hnand->Init.NandBank, FSMC_FLAG_FALLING_EDGE);
|
|
}
|
|
|
|
/* Check NAND interrupt FIFO empty flag */
|
|
if(__FSMC_NAND_GET_FLAG(hnand->Instance, hnand->Init.NandBank, FSMC_FLAG_FEMPT))
|
|
{
|
|
/* NAND interrupt callback*/
|
|
HAL_NAND_ITCallback(hnand);
|
|
|
|
/* Clear NAND interrupt FIFO empty pending bit */
|
|
__FSMC_NAND_CLEAR_FLAG(hnand->Instance, hnand->Init.NandBank, FSMC_FLAG_FEMPT);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief NAND interrupt feature callback
|
|
* @param hnand: pointer to a NAND_HandleTypeDef structure that contains
|
|
* the configuration information for NAND module.
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_NAND_ITCallback(NAND_HandleTypeDef *hnand)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hnand);
|
|
/* NOTE : This function Should not be modified, when the callback is needed,
|
|
the HAL_NAND_ITCallback could be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup NAND_Exported_Functions_Group2 Input and Output functions
|
|
* @brief Input Output and memory control functions
|
|
*
|
|
@verbatim
|
|
==============================================================================
|
|
##### NAND Input and Output functions #####
|
|
==============================================================================
|
|
[..]
|
|
This section provides functions allowing to use and control the NAND
|
|
memory
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Read the NAND memory electronic signature
|
|
* @param hnand: pointer to a NAND_HandleTypeDef structure that contains
|
|
* the configuration information for NAND module.
|
|
* @param pNAND_ID: NAND ID structure
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_NAND_Read_ID(NAND_HandleTypeDef *hnand, NAND_IDTypeDef *pNAND_ID)
|
|
{
|
|
__IO uint32_t data = 0U;
|
|
__IO uint32_t data1 = 0U;
|
|
uint32_t deviceaddress = 0U;
|
|
|
|
/* Process Locked */
|
|
__HAL_LOCK(hnand);
|
|
|
|
/* Check the NAND controller state */
|
|
if(hnand->State == HAL_NAND_STATE_BUSY)
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
|
|
/* Identify the device address */
|
|
if(hnand->Init.NandBank == FSMC_NAND_BANK2)
|
|
{
|
|
deviceaddress = NAND_DEVICE1;
|
|
}
|
|
else
|
|
{
|
|
deviceaddress = NAND_DEVICE2;
|
|
}
|
|
|
|
/* Update the NAND controller state */
|
|
hnand->State = HAL_NAND_STATE_BUSY;
|
|
|
|
/* Send Read ID command sequence */
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_READID;
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00;
|
|
|
|
/* Read the electronic signature from NAND flash */
|
|
if (hnand->Init.MemoryDataWidth == FSMC_NAND_PCC_MEM_BUS_WIDTH_8)
|
|
{
|
|
data = *(__IO uint32_t *)deviceaddress;
|
|
|
|
/* Return the data read */
|
|
pNAND_ID->Maker_Id = ADDR_1ST_CYCLE(data);
|
|
pNAND_ID->Device_Id = ADDR_2ND_CYCLE(data);
|
|
pNAND_ID->Third_Id = ADDR_3RD_CYCLE(data);
|
|
pNAND_ID->Fourth_Id = ADDR_4TH_CYCLE(data);
|
|
}
|
|
else
|
|
{
|
|
data = *(__IO uint32_t *)deviceaddress;
|
|
data1 = *((__IO uint32_t *)deviceaddress + 4U);
|
|
|
|
/* Return the data read */
|
|
pNAND_ID->Maker_Id = ADDR_1ST_CYCLE(data);
|
|
pNAND_ID->Device_Id = ADDR_3RD_CYCLE(data);
|
|
pNAND_ID->Third_Id = ADDR_1ST_CYCLE(data1);
|
|
pNAND_ID->Fourth_Id = ADDR_3RD_CYCLE(data1);
|
|
}
|
|
|
|
/* Update the NAND controller state */
|
|
hnand->State = HAL_NAND_STATE_READY;
|
|
|
|
/* Process unlocked */
|
|
__HAL_UNLOCK(hnand);
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief NAND memory reset
|
|
* @param hnand: pointer to a NAND_HandleTypeDef structure that contains
|
|
* the configuration information for NAND module.
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_NAND_Reset(NAND_HandleTypeDef *hnand)
|
|
{
|
|
uint32_t deviceaddress = 0U;
|
|
|
|
/* Process Locked */
|
|
__HAL_LOCK(hnand);
|
|
|
|
/* Check the NAND controller state */
|
|
if(hnand->State == HAL_NAND_STATE_BUSY)
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
|
|
/* Identify the device address */
|
|
if(hnand->Init.NandBank == FSMC_NAND_BANK2)
|
|
{
|
|
deviceaddress = NAND_DEVICE1;
|
|
}
|
|
else
|
|
{
|
|
deviceaddress = NAND_DEVICE2;
|
|
}
|
|
|
|
/* Update the NAND controller state */
|
|
hnand->State = HAL_NAND_STATE_BUSY;
|
|
|
|
/* Send NAND reset command */
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = 0xFF;
|
|
|
|
|
|
/* Update the NAND controller state */
|
|
hnand->State = HAL_NAND_STATE_READY;
|
|
|
|
/* Process unlocked */
|
|
__HAL_UNLOCK(hnand);
|
|
|
|
return HAL_OK;
|
|
|
|
}
|
|
|
|
/**
|
|
* @brief Configure the device: Enter the physical parameters of the device
|
|
* @param hnand: pointer to a NAND_HandleTypeDef structure that contains
|
|
* the configuration information for NAND module.
|
|
* @param pDeviceConfig : pointer to NAND_DeviceConfigTypeDef structure
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_NAND_ConfigDevice(NAND_HandleTypeDef *hnand, NAND_DeviceConfigTypeDef *pDeviceConfig)
|
|
{
|
|
hnand->Config.PageSize = pDeviceConfig->PageSize;
|
|
hnand->Config.SpareAreaSize = pDeviceConfig->SpareAreaSize;
|
|
hnand->Config.BlockSize = pDeviceConfig->BlockSize;
|
|
hnand->Config.BlockNbr = pDeviceConfig->BlockNbr;
|
|
hnand->Config.PlaneSize = pDeviceConfig->PlaneSize;
|
|
hnand->Config.PlaneNbr = pDeviceConfig->PlaneNbr;
|
|
hnand->Config.ExtraCommandEnable = pDeviceConfig->ExtraCommandEnable;
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Read Page(s) from NAND memory block (8-bits addressing)
|
|
* @param hnand: pointer to a NAND_HandleTypeDef structure that contains
|
|
* the configuration information for NAND module.
|
|
* @param pAddress : pointer to NAND address structure
|
|
* @param pBuffer : pointer to destination read buffer
|
|
* @param NumPageToRead : number of pages to read from block
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_NAND_Read_Page_8b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumPageToRead)
|
|
{
|
|
__IO uint32_t index = 0U;
|
|
uint32_t tickstart = 0U;
|
|
uint32_t deviceaddress = 0U, size = 0U, numPagesRead = 0U, nandaddress = 0U;
|
|
|
|
/* Process Locked */
|
|
__HAL_LOCK(hnand);
|
|
|
|
/* Check the NAND controller state */
|
|
if(hnand->State == HAL_NAND_STATE_BUSY)
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
|
|
/* Identify the device address */
|
|
if(hnand->Init.NandBank == FSMC_NAND_BANK2)
|
|
{
|
|
deviceaddress = NAND_DEVICE1;
|
|
}
|
|
else
|
|
{
|
|
deviceaddress = NAND_DEVICE2;
|
|
}
|
|
|
|
/* Update the NAND controller state */
|
|
hnand->State = HAL_NAND_STATE_BUSY;
|
|
|
|
/* NAND raw address calculation */
|
|
nandaddress = ARRAY_ADDRESS(pAddress, hnand);
|
|
|
|
/* Page(s) read loop */
|
|
while((NumPageToRead != 0U) && (nandaddress < ((hnand->Config.BlockSize) * (hnand->Config.BlockNbr))))
|
|
{
|
|
/* update the buffer size */
|
|
size = (hnand->Config.PageSize) + ((hnand->Config.PageSize) * numPagesRead);
|
|
|
|
/* Send read page command sequence */
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_A;
|
|
|
|
/* Cards with page size <= 512 bytes */
|
|
if((hnand->Config.PageSize) <= 512U)
|
|
{
|
|
if (((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) <= 65535U)
|
|
{
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00;
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
|
|
}
|
|
else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */
|
|
{
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00;
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress);
|
|
}
|
|
}
|
|
else /* (hnand->Config.PageSize) > 512 */
|
|
{
|
|
if (((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) <= 65535U)
|
|
{
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00;
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00;
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
|
|
}
|
|
else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */
|
|
{
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00;
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00;
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress);
|
|
}
|
|
}
|
|
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_TRUE1;
|
|
|
|
/* Check if an extra command is needed for reading pages */
|
|
if(hnand->Config.ExtraCommandEnable == ENABLE)
|
|
{
|
|
/* Get tick */
|
|
tickstart = HAL_GetTick();
|
|
|
|
/* Read status until NAND is ready */
|
|
while(HAL_NAND_Read_Status(hnand) != NAND_READY)
|
|
{
|
|
if((HAL_GetTick() - tickstart ) > NAND_WRITE_TIMEOUT)
|
|
{
|
|
return HAL_TIMEOUT;
|
|
}
|
|
}
|
|
|
|
/* Go back to read mode */
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = ((uint8_t)0x00);
|
|
}
|
|
|
|
/* Get Data into Buffer */
|
|
for(; index < size; index++)
|
|
{
|
|
*(uint8_t *)pBuffer++ = *(uint8_t *)deviceaddress;
|
|
}
|
|
|
|
/* Increment read pages number */
|
|
numPagesRead++;
|
|
|
|
/* Decrement pages to read */
|
|
NumPageToRead--;
|
|
|
|
/* Increment the NAND address */
|
|
nandaddress = (uint32_t)(nandaddress + 1U);
|
|
}
|
|
|
|
/* Update the NAND controller state */
|
|
hnand->State = HAL_NAND_STATE_READY;
|
|
|
|
/* Process unlocked */
|
|
__HAL_UNLOCK(hnand);
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Read Page(s) from NAND memory block (16-bits addressing)
|
|
* @param hnand: pointer to a NAND_HandleTypeDef structure that contains
|
|
* the configuration information for NAND module.
|
|
* @param pAddress : pointer to NAND address structure
|
|
* @param pBuffer : pointer to destination read buffer. pBuffer should be 16bits aligned
|
|
* @param NumPageToRead : number of pages to read from block
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_NAND_Read_Page_16b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint16_t *pBuffer, uint32_t NumPageToRead)
|
|
{
|
|
__IO uint32_t index = 0U;
|
|
uint32_t tickstart = 0U;
|
|
uint32_t deviceaddress = 0U, size = 0U, numPagesRead = 0U, nandaddress = 0U;
|
|
|
|
/* Process Locked */
|
|
__HAL_LOCK(hnand);
|
|
|
|
/* Check the NAND controller state */
|
|
if(hnand->State == HAL_NAND_STATE_BUSY)
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
|
|
/* Identify the device address */
|
|
if(hnand->Init.NandBank == FSMC_NAND_BANK2)
|
|
{
|
|
deviceaddress = NAND_DEVICE1;
|
|
}
|
|
else
|
|
{
|
|
deviceaddress = NAND_DEVICE2;
|
|
}
|
|
|
|
/* Update the NAND controller state */
|
|
hnand->State = HAL_NAND_STATE_BUSY;
|
|
|
|
/* NAND raw address calculation */
|
|
nandaddress = ARRAY_ADDRESS(pAddress, hnand);
|
|
|
|
/* Page(s) read loop */
|
|
while((NumPageToRead != 0U) && (nandaddress < ((hnand->Config.BlockSize) * (hnand->Config.BlockNbr))))
|
|
{
|
|
/* update the buffer size */
|
|
size = (hnand->Config.PageSize) + ((hnand->Config.PageSize) * numPagesRead);
|
|
|
|
/* Send read page command sequence */
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_A;
|
|
|
|
/* Cards with page size <= 512 bytes */
|
|
if((hnand->Config.PageSize) <= 512U)
|
|
{
|
|
if (((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) <= 65535U)
|
|
{
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00;
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
|
|
}
|
|
else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */
|
|
{
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00;
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress);
|
|
}
|
|
}
|
|
else /* (hnand->Config.PageSize) > 512 */
|
|
{
|
|
if (((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) <= 65535U)
|
|
{
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00;
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00;
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
|
|
}
|
|
else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */
|
|
{
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00;
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00;
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress);
|
|
}
|
|
}
|
|
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_TRUE1;
|
|
|
|
if(hnand->Config.ExtraCommandEnable == ENABLE)
|
|
{
|
|
/* Get tick */
|
|
tickstart = HAL_GetTick();
|
|
|
|
/* Read status until NAND is ready */
|
|
while(HAL_NAND_Read_Status(hnand) != NAND_READY)
|
|
{
|
|
if((HAL_GetTick() - tickstart ) > NAND_WRITE_TIMEOUT)
|
|
{
|
|
return HAL_TIMEOUT;
|
|
}
|
|
}
|
|
|
|
/* Go back to read mode */
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = ((uint8_t)0x00);
|
|
}
|
|
|
|
/* Get Data into Buffer */
|
|
for(; index < size; index++)
|
|
{
|
|
*(uint16_t *)pBuffer++ = *(uint16_t *)deviceaddress;
|
|
}
|
|
|
|
/* Increment read pages number */
|
|
numPagesRead++;
|
|
|
|
/* Decrement pages to read */
|
|
NumPageToRead--;
|
|
|
|
/* Increment the NAND address */
|
|
nandaddress = (uint32_t)(nandaddress + 1U);
|
|
}
|
|
|
|
/* Update the NAND controller state */
|
|
hnand->State = HAL_NAND_STATE_READY;
|
|
|
|
/* Process unlocked */
|
|
__HAL_UNLOCK(hnand);
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Write Page(s) to NAND memory block (8-bits addressing)
|
|
* @param hnand: pointer to a NAND_HandleTypeDef structure that contains
|
|
* the configuration information for NAND module.
|
|
* @param pAddress : pointer to NAND address structure
|
|
* @param pBuffer : pointer to source buffer to write
|
|
* @param NumPageToWrite : number of pages to write to block
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_NAND_Write_Page_8b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumPageToWrite)
|
|
{
|
|
__IO uint32_t index = 0U;
|
|
uint32_t tickstart = 0U;
|
|
uint32_t deviceaddress = 0U, size = 0U, numPagesWritten = 0U, nandaddress = 0U;
|
|
|
|
/* Process Locked */
|
|
__HAL_LOCK(hnand);
|
|
|
|
/* Check the NAND controller state */
|
|
if(hnand->State == HAL_NAND_STATE_BUSY)
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
|
|
/* Identify the device address */
|
|
if(hnand->Init.NandBank == FSMC_NAND_BANK2)
|
|
{
|
|
deviceaddress = NAND_DEVICE1;
|
|
}
|
|
else
|
|
{
|
|
deviceaddress = NAND_DEVICE2;
|
|
}
|
|
|
|
/* Update the NAND controller state */
|
|
hnand->State = HAL_NAND_STATE_BUSY;
|
|
|
|
/* NAND raw address calculation */
|
|
nandaddress = ARRAY_ADDRESS(pAddress, hnand);
|
|
|
|
/* Page(s) write loop */
|
|
while((NumPageToWrite != 0U) && (nandaddress < ((hnand->Config.BlockSize) * (hnand->Config.BlockNbr))))
|
|
{
|
|
/* update the buffer size */
|
|
size = hnand->Config.PageSize + ((hnand->Config.PageSize) * numPagesWritten);
|
|
|
|
/* Send write page command sequence */
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_A;
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE0;
|
|
|
|
/* Cards with page size <= 512 bytes */
|
|
if((hnand->Config.PageSize) <= 512U)
|
|
{
|
|
if (((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) <= 65535U)
|
|
{
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00;
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
|
|
}
|
|
else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */
|
|
{
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00;
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress);
|
|
}
|
|
}
|
|
else /* (hnand->Config.PageSize) > 512 */
|
|
{
|
|
if (((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) <= 65535U)
|
|
{
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00;
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00;
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
|
|
}
|
|
else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */
|
|
{
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00;
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00;
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress);
|
|
}
|
|
}
|
|
|
|
|
|
/* Write data to memory */
|
|
for(; index < size; index++)
|
|
{
|
|
*(__IO uint8_t *)deviceaddress = *(uint8_t *)pBuffer++;
|
|
}
|
|
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE_TRUE1;
|
|
|
|
/* Read status until NAND is ready */
|
|
while(HAL_NAND_Read_Status(hnand) != NAND_READY)
|
|
{
|
|
/* Get tick */
|
|
tickstart = HAL_GetTick();
|
|
|
|
if((HAL_GetTick() - tickstart ) > NAND_WRITE_TIMEOUT)
|
|
{
|
|
return HAL_TIMEOUT;
|
|
}
|
|
}
|
|
|
|
/* Increment written pages number */
|
|
numPagesWritten++;
|
|
|
|
/* Decrement pages to write */
|
|
NumPageToWrite--;
|
|
|
|
/* Increment the NAND address */
|
|
nandaddress = (uint32_t)(nandaddress + 1U);
|
|
}
|
|
|
|
/* Update the NAND controller state */
|
|
hnand->State = HAL_NAND_STATE_READY;
|
|
|
|
/* Process unlocked */
|
|
__HAL_UNLOCK(hnand);
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Write Page(s) to NAND memory block (16-bits addressing)
|
|
* @param hnand: pointer to a NAND_HandleTypeDef structure that contains
|
|
* the configuration information for NAND module.
|
|
* @param pAddress : pointer to NAND address structure
|
|
* @param pBuffer : pointer to source buffer to write. pBuffer should be 16bits aligned
|
|
* @param NumPageToWrite : number of pages to write to block
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_NAND_Write_Page_16b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint16_t *pBuffer, uint32_t NumPageToWrite)
|
|
{
|
|
__IO uint32_t index = 0U;
|
|
uint32_t tickstart = 0U;
|
|
uint32_t deviceaddress = 0U, size = 0U, numPagesWritten = 0U, nandaddress = 0U;
|
|
|
|
/* Process Locked */
|
|
__HAL_LOCK(hnand);
|
|
|
|
/* Check the NAND controller state */
|
|
if(hnand->State == HAL_NAND_STATE_BUSY)
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
|
|
/* Identify the device address */
|
|
if(hnand->Init.NandBank == FSMC_NAND_BANK2)
|
|
{
|
|
deviceaddress = NAND_DEVICE1;
|
|
}
|
|
else
|
|
{
|
|
deviceaddress = NAND_DEVICE2;
|
|
}
|
|
|
|
/* Update the NAND controller state */
|
|
hnand->State = HAL_NAND_STATE_BUSY;
|
|
|
|
/* NAND raw address calculation */
|
|
nandaddress = ARRAY_ADDRESS(pAddress, hnand);
|
|
|
|
/* Page(s) write loop */
|
|
while((NumPageToWrite != 0U) && (nandaddress < ((hnand->Config.BlockSize) * (hnand->Config.BlockNbr))))
|
|
{
|
|
/* update the buffer size */
|
|
size = (hnand->Config.PageSize) + ((hnand->Config.PageSize) * numPagesWritten);
|
|
|
|
/* Send write page command sequence */
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_A;
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE0;
|
|
|
|
/* Cards with page size <= 512 bytes */
|
|
if((hnand->Config.PageSize) <= 512U)
|
|
{
|
|
if (((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) <= 65535U)
|
|
{
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00;
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
|
|
}
|
|
else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */
|
|
{
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00;
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress);
|
|
}
|
|
}
|
|
else /* (hnand->Config.PageSize) > 512 */
|
|
{
|
|
if (((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) <= 65535U)
|
|
{
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00;
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00;
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
|
|
}
|
|
else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */
|
|
{
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00;
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00;
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress);
|
|
}
|
|
}
|
|
|
|
/* Write data to memory */
|
|
for(; index < size; index++)
|
|
{
|
|
*(__IO uint16_t *)deviceaddress = *(uint16_t *)pBuffer++;
|
|
}
|
|
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE_TRUE1;
|
|
|
|
/* Read status until NAND is ready */
|
|
while(HAL_NAND_Read_Status(hnand) != NAND_READY)
|
|
{
|
|
/* Get tick */
|
|
tickstart = HAL_GetTick();
|
|
|
|
if((HAL_GetTick() - tickstart ) > NAND_WRITE_TIMEOUT)
|
|
{
|
|
return HAL_TIMEOUT;
|
|
}
|
|
}
|
|
|
|
/* Increment written pages number */
|
|
numPagesWritten++;
|
|
|
|
/* Decrement pages to write */
|
|
NumPageToWrite--;
|
|
|
|
/* Increment the NAND address */
|
|
nandaddress = (uint32_t)(nandaddress + 1U);
|
|
}
|
|
|
|
/* Update the NAND controller state */
|
|
hnand->State = HAL_NAND_STATE_READY;
|
|
|
|
/* Process unlocked */
|
|
__HAL_UNLOCK(hnand);
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Read Spare area(s) from NAND memory (8-bits addressing)
|
|
* @param hnand: pointer to a NAND_HandleTypeDef structure that contains
|
|
* the configuration information for NAND module.
|
|
* @param pAddress : pointer to NAND address structure
|
|
* @param pBuffer: pointer to source buffer to write
|
|
* @param NumSpareAreaToRead: Number of spare area to read
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_NAND_Read_SpareArea_8b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumSpareAreaToRead)
|
|
{
|
|
__IO uint32_t index = 0U;
|
|
uint32_t tickstart = 0U;
|
|
uint32_t deviceaddress = 0U, size = 0U, numSpareAreaRead = 0U, nandaddress = 0U, columnaddress = 0U;
|
|
|
|
/* Process Locked */
|
|
__HAL_LOCK(hnand);
|
|
|
|
/* Check the NAND controller state */
|
|
if(hnand->State == HAL_NAND_STATE_BUSY)
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
|
|
/* Identify the device address */
|
|
if(hnand->Init.NandBank == FSMC_NAND_BANK2)
|
|
{
|
|
deviceaddress = NAND_DEVICE1;
|
|
}
|
|
else
|
|
{
|
|
deviceaddress = NAND_DEVICE2;
|
|
}
|
|
|
|
/* Update the NAND controller state */
|
|
hnand->State = HAL_NAND_STATE_BUSY;
|
|
|
|
/* NAND raw address calculation */
|
|
nandaddress = ARRAY_ADDRESS(pAddress, hnand);
|
|
|
|
/* Column in page address */
|
|
columnaddress = COLUMN_ADDRESS(hnand);
|
|
|
|
/* Spare area(s) read loop */
|
|
while((NumSpareAreaToRead != 0U) && (nandaddress < ((hnand->Config.BlockSize) * (hnand->Config.BlockNbr))))
|
|
{
|
|
/* update the buffer size */
|
|
size = (hnand->Config.SpareAreaSize) + ((hnand->Config.SpareAreaSize) * numSpareAreaRead);
|
|
|
|
/* Cards with page size <= 512 bytes */
|
|
if((hnand->Config.PageSize) <= 512U)
|
|
{
|
|
/* Send read spare area command sequence */
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_C;
|
|
|
|
if (((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) <= 65535U)
|
|
{
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00;
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
|
|
}
|
|
else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */
|
|
{
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00;
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress);
|
|
}
|
|
}
|
|
else /* (hnand->Config.PageSize) > 512 */
|
|
{
|
|
/* Send read spare area command sequence */
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_A;
|
|
|
|
if (((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) <= 65535U)
|
|
{
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_1ST_CYCLE(columnaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_2ND_CYCLE(columnaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
|
|
}
|
|
else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */
|
|
{
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_1ST_CYCLE(columnaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_2ND_CYCLE(columnaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress);
|
|
}
|
|
}
|
|
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_TRUE1;
|
|
|
|
if(hnand->Config.ExtraCommandEnable == ENABLE)
|
|
{
|
|
/* Get tick */
|
|
tickstart = HAL_GetTick();
|
|
|
|
/* Read status until NAND is ready */
|
|
while(HAL_NAND_Read_Status(hnand) != NAND_READY)
|
|
{
|
|
if((HAL_GetTick() - tickstart ) > NAND_WRITE_TIMEOUT)
|
|
{
|
|
return HAL_TIMEOUT;
|
|
}
|
|
}
|
|
|
|
/* Go back to read mode */
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = ((uint8_t)0x00);
|
|
}
|
|
|
|
/* Get Data into Buffer */
|
|
for(; index < size; index++)
|
|
{
|
|
*(uint8_t *)pBuffer++ = *(uint8_t *)deviceaddress;
|
|
}
|
|
|
|
/* Increment read spare areas number */
|
|
numSpareAreaRead++;
|
|
|
|
/* Decrement spare areas to read */
|
|
NumSpareAreaToRead--;
|
|
|
|
/* Increment the NAND address */
|
|
nandaddress = (uint32_t)(nandaddress + 1U);
|
|
}
|
|
|
|
/* Update the NAND controller state */
|
|
hnand->State = HAL_NAND_STATE_READY;
|
|
|
|
/* Process unlocked */
|
|
__HAL_UNLOCK(hnand);
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Read Spare area(s) from NAND memory (16-bits addressing)
|
|
* @param hnand: pointer to a NAND_HandleTypeDef structure that contains
|
|
* the configuration information for NAND module.
|
|
* @param pAddress : pointer to NAND address structure
|
|
* @param pBuffer: pointer to source buffer to write. pBuffer should be 16bits aligned.
|
|
* @param NumSpareAreaToRead: Number of spare area to read
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_NAND_Read_SpareArea_16b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint16_t *pBuffer, uint32_t NumSpareAreaToRead)
|
|
{
|
|
__IO uint32_t index = 0U;
|
|
uint32_t tickstart = 0U;
|
|
uint32_t deviceaddress = 0U, size = 0U, numSpareAreaRead = 0U, nandaddress = 0U, columnaddress = 0U;
|
|
|
|
/* Process Locked */
|
|
__HAL_LOCK(hnand);
|
|
|
|
/* Check the NAND controller state */
|
|
if(hnand->State == HAL_NAND_STATE_BUSY)
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
|
|
/* Identify the device address */
|
|
if(hnand->Init.NandBank == FSMC_NAND_BANK2)
|
|
{
|
|
deviceaddress = NAND_DEVICE1;
|
|
}
|
|
else
|
|
{
|
|
deviceaddress = NAND_DEVICE2;
|
|
}
|
|
|
|
/* Update the NAND controller state */
|
|
hnand->State = HAL_NAND_STATE_BUSY;
|
|
|
|
/* NAND raw address calculation */
|
|
nandaddress = ARRAY_ADDRESS(pAddress, hnand);
|
|
|
|
/* Column in page address */
|
|
columnaddress = (uint32_t)(COLUMN_ADDRESS(hnand) * 2U);
|
|
|
|
/* Spare area(s) read loop */
|
|
while((NumSpareAreaToRead != 0U) && (nandaddress < ((hnand->Config.BlockSize) * (hnand->Config.BlockNbr))))
|
|
{
|
|
/* update the buffer size */
|
|
size = (hnand->Config.SpareAreaSize) + ((hnand->Config.SpareAreaSize) * numSpareAreaRead);
|
|
|
|
/* Cards with page size <= 512 bytes */
|
|
if((hnand->Config.PageSize) <= 512U)
|
|
{
|
|
/* Send read spare area command sequence */
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_C;
|
|
|
|
if (((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) <= 65535U)
|
|
{
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00;
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
|
|
}
|
|
else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */
|
|
{
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00;
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress);
|
|
}
|
|
}
|
|
else /* (hnand->Config.PageSize) > 512 */
|
|
{
|
|
/* Send read spare area command sequence */
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_A;
|
|
|
|
if (((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) <= 65535U)
|
|
{
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_1ST_CYCLE(columnaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_2ND_CYCLE(columnaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
|
|
}
|
|
else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */
|
|
{
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_1ST_CYCLE(columnaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_2ND_CYCLE(columnaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress);
|
|
}
|
|
}
|
|
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_TRUE1;
|
|
|
|
if(hnand->Config.ExtraCommandEnable == ENABLE)
|
|
{
|
|
/* Get tick */
|
|
tickstart = HAL_GetTick();
|
|
|
|
/* Read status until NAND is ready */
|
|
while(HAL_NAND_Read_Status(hnand) != NAND_READY)
|
|
{
|
|
if((HAL_GetTick() - tickstart ) > NAND_WRITE_TIMEOUT)
|
|
{
|
|
return HAL_TIMEOUT;
|
|
}
|
|
}
|
|
|
|
/* Go back to read mode */
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = ((uint8_t)0x00);
|
|
}
|
|
|
|
/* Get Data into Buffer */
|
|
for(; index < size; index++)
|
|
{
|
|
*(uint16_t *)pBuffer++ = *(uint16_t *)deviceaddress;
|
|
}
|
|
|
|
/* Increment read spare areas number */
|
|
numSpareAreaRead++;
|
|
|
|
/* Decrement spare areas to read */
|
|
NumSpareAreaToRead--;
|
|
|
|
/* Increment the NAND address */
|
|
nandaddress = (uint32_t)(nandaddress + 1U);
|
|
}
|
|
|
|
/* Update the NAND controller state */
|
|
hnand->State = HAL_NAND_STATE_READY;
|
|
|
|
/* Process unlocked */
|
|
__HAL_UNLOCK(hnand);
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Write Spare area(s) to NAND memory (8-bits addressing)
|
|
* @param hnand: pointer to a NAND_HandleTypeDef structure that contains
|
|
* the configuration information for NAND module.
|
|
* @param pAddress : pointer to NAND address structure
|
|
* @param pBuffer : pointer to source buffer to write
|
|
* @param NumSpareAreaTowrite : number of spare areas to write to block
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_NAND_Write_SpareArea_8b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumSpareAreaTowrite)
|
|
{
|
|
__IO uint32_t index = 0U;
|
|
uint32_t tickstart = 0U;
|
|
uint32_t deviceaddress = 0U, size = 0U, numSpareAreaWritten = 0U, nandaddress = 0U, columnaddress = 0U;
|
|
|
|
/* Process Locked */
|
|
__HAL_LOCK(hnand);
|
|
|
|
/* Check the NAND controller state */
|
|
if(hnand->State == HAL_NAND_STATE_BUSY)
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
|
|
/* Identify the device address */
|
|
if(hnand->Init.NandBank == FSMC_NAND_BANK2)
|
|
{
|
|
deviceaddress = NAND_DEVICE1;
|
|
}
|
|
else
|
|
{
|
|
deviceaddress = NAND_DEVICE2;
|
|
}
|
|
|
|
/* Update the FSMC_NAND controller state */
|
|
hnand->State = HAL_NAND_STATE_BUSY;
|
|
|
|
/* Page address calculation */
|
|
nandaddress = ARRAY_ADDRESS(pAddress, hnand);
|
|
|
|
/* Column in page address */
|
|
columnaddress = COLUMN_ADDRESS(hnand);
|
|
|
|
/* Spare area(s) write loop */
|
|
while((NumSpareAreaTowrite != 0U) && (nandaddress < ((hnand->Config.BlockSize) * (hnand->Config.BlockNbr))))
|
|
{
|
|
/* update the buffer size */
|
|
size = (hnand->Config.SpareAreaSize) + ((hnand->Config.SpareAreaSize) * numSpareAreaWritten);
|
|
|
|
/* Cards with page size <= 512 bytes */
|
|
if((hnand->Config.PageSize) <= 512U)
|
|
{
|
|
/* Send write Spare area command sequence */
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_C;
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE0;
|
|
|
|
if (((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) <= 65535U)
|
|
{
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00;
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
|
|
}
|
|
else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */
|
|
{
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00;
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress);
|
|
}
|
|
}
|
|
else /* (hnand->Config.PageSize) > 512 */
|
|
{
|
|
/* Send write Spare area command sequence */
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_A;
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE0;
|
|
|
|
if (((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) <= 65535U)
|
|
{
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_1ST_CYCLE(columnaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_2ND_CYCLE(columnaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
|
|
}
|
|
else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */
|
|
{
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_1ST_CYCLE(columnaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_2ND_CYCLE(columnaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress);
|
|
}
|
|
}
|
|
|
|
/* Write data to memory */
|
|
for(; index < size; index++)
|
|
{
|
|
*(__IO uint8_t *)deviceaddress = *(uint8_t *)pBuffer++;
|
|
}
|
|
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE_TRUE1;
|
|
|
|
/* Get tick */
|
|
tickstart = HAL_GetTick();
|
|
|
|
/* Read status until NAND is ready */
|
|
while(HAL_NAND_Read_Status(hnand) != NAND_READY)
|
|
{
|
|
if((HAL_GetTick() - tickstart ) > NAND_WRITE_TIMEOUT)
|
|
{
|
|
return HAL_TIMEOUT;
|
|
}
|
|
}
|
|
|
|
/* Increment written spare areas number */
|
|
numSpareAreaWritten++;
|
|
|
|
/* Decrement spare areas to write */
|
|
NumSpareAreaTowrite--;
|
|
|
|
/* Increment the NAND address */
|
|
nandaddress = (uint32_t)(nandaddress + 1U);
|
|
}
|
|
|
|
/* Update the NAND controller state */
|
|
hnand->State = HAL_NAND_STATE_READY;
|
|
|
|
/* Process unlocked */
|
|
__HAL_UNLOCK(hnand);
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Write Spare area(s) to NAND memory (16-bits addressing)
|
|
* @param hnand: pointer to a NAND_HandleTypeDef structure that contains
|
|
* the configuration information for NAND module.
|
|
* @param pAddress : pointer to NAND address structure
|
|
* @param pBuffer : pointer to source buffer to write. pBuffer should be 16bits aligned.
|
|
* @param NumSpareAreaTowrite : number of spare areas to write to block
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_NAND_Write_SpareArea_16b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint16_t *pBuffer, uint32_t NumSpareAreaTowrite)
|
|
{
|
|
__IO uint32_t index = 0U;
|
|
uint32_t tickstart = 0U;
|
|
uint32_t deviceaddress = 0U, size = 0U, numSpareAreaWritten = 0U, nandaddress = 0U, columnaddress = 0U;
|
|
|
|
/* Process Locked */
|
|
__HAL_LOCK(hnand);
|
|
|
|
/* Check the NAND controller state */
|
|
if(hnand->State == HAL_NAND_STATE_BUSY)
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
|
|
/* Identify the device address */
|
|
if(hnand->Init.NandBank == FSMC_NAND_BANK2)
|
|
{
|
|
deviceaddress = NAND_DEVICE1;
|
|
}
|
|
else
|
|
{
|
|
deviceaddress = NAND_DEVICE2;
|
|
}
|
|
|
|
/* Update the FSMC_NAND controller state */
|
|
hnand->State = HAL_NAND_STATE_BUSY;
|
|
|
|
/* NAND raw address calculation */
|
|
nandaddress = ARRAY_ADDRESS(pAddress, hnand);
|
|
|
|
/* Column in page address */
|
|
columnaddress = (uint32_t)(COLUMN_ADDRESS(hnand) * 2U);
|
|
|
|
/* Spare area(s) write loop */
|
|
while((NumSpareAreaTowrite != 0U) && (nandaddress < ((hnand->Config.BlockSize) * (hnand->Config.BlockNbr))))
|
|
{
|
|
/* update the buffer size */
|
|
size = (hnand->Config.SpareAreaSize) + ((hnand->Config.SpareAreaSize) * numSpareAreaWritten);
|
|
|
|
/* Cards with page size <= 512 bytes */
|
|
if((hnand->Config.PageSize) <= 512U)
|
|
{
|
|
/* Send write Spare area command sequence */
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_C;
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE0;
|
|
|
|
if (((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) <= 65535U)
|
|
{
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00;
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
|
|
}
|
|
else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */
|
|
{
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00;
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress);
|
|
}
|
|
}
|
|
else /* (hnand->Config.PageSize) > 512 */
|
|
{
|
|
/* Send write Spare area command sequence */
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_A;
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE0;
|
|
|
|
if (((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) <= 65535U)
|
|
{
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_1ST_CYCLE(columnaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_2ND_CYCLE(columnaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
|
|
}
|
|
else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */
|
|
{
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_1ST_CYCLE(columnaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_2ND_CYCLE(columnaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress);
|
|
}
|
|
}
|
|
|
|
/* Write data to memory */
|
|
for(; index < size; index++)
|
|
{
|
|
*(__IO uint16_t *)deviceaddress = *(uint16_t *)pBuffer++;
|
|
}
|
|
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE_TRUE1;
|
|
|
|
/* Read status until NAND is ready */
|
|
while(HAL_NAND_Read_Status(hnand) != NAND_READY)
|
|
{
|
|
/* Get tick */
|
|
tickstart = HAL_GetTick();
|
|
|
|
if((HAL_GetTick() - tickstart ) > NAND_WRITE_TIMEOUT)
|
|
{
|
|
return HAL_TIMEOUT;
|
|
}
|
|
}
|
|
|
|
/* Increment written spare areas number */
|
|
numSpareAreaWritten++;
|
|
|
|
/* Decrement spare areas to write */
|
|
NumSpareAreaTowrite--;
|
|
|
|
/* Increment the NAND address */
|
|
nandaddress = (uint32_t)(nandaddress + 1U);
|
|
}
|
|
|
|
/* Update the NAND controller state */
|
|
hnand->State = HAL_NAND_STATE_READY;
|
|
|
|
/* Process unlocked */
|
|
__HAL_UNLOCK(hnand);
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief NAND memory Block erase
|
|
* @param hnand: pointer to a NAND_HandleTypeDef structure that contains
|
|
* the configuration information for NAND module.
|
|
* @param pAddress : pointer to NAND address structure
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_NAND_Erase_Block(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress)
|
|
{
|
|
uint32_t deviceaddress = 0U;
|
|
uint32_t tickstart = 0U;
|
|
|
|
/* Process Locked */
|
|
__HAL_LOCK(hnand);
|
|
|
|
/* Check the NAND controller state */
|
|
if(hnand->State == HAL_NAND_STATE_BUSY)
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
|
|
/* Identify the device address */
|
|
if(hnand->Init.NandBank == FSMC_NAND_BANK2)
|
|
{
|
|
deviceaddress = NAND_DEVICE1;
|
|
}
|
|
else
|
|
{
|
|
deviceaddress = NAND_DEVICE2;
|
|
}
|
|
|
|
/* Update the NAND controller state */
|
|
hnand->State = HAL_NAND_STATE_BUSY;
|
|
|
|
/* Send Erase block command sequence */
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_ERASE0;
|
|
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(ARRAY_ADDRESS(pAddress, hnand));
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(ARRAY_ADDRESS(pAddress, hnand));
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(ARRAY_ADDRESS(pAddress, hnand));
|
|
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_ERASE1;
|
|
|
|
/* Update the NAND controller state */
|
|
hnand->State = HAL_NAND_STATE_READY;
|
|
|
|
/* Get tick */
|
|
tickstart = HAL_GetTick();
|
|
|
|
/* Read status until NAND is ready */
|
|
while(HAL_NAND_Read_Status(hnand) != NAND_READY)
|
|
{
|
|
if((HAL_GetTick() - tickstart ) > NAND_WRITE_TIMEOUT)
|
|
{
|
|
/* Process unlocked */
|
|
__HAL_UNLOCK(hnand);
|
|
|
|
return HAL_TIMEOUT;
|
|
}
|
|
}
|
|
|
|
/* Process unlocked */
|
|
__HAL_UNLOCK(hnand);
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief NAND memory read status
|
|
* @param hnand: pointer to a NAND_HandleTypeDef structure that contains
|
|
* the configuration information for NAND module.
|
|
* @retval NAND status
|
|
*/
|
|
uint32_t HAL_NAND_Read_Status(NAND_HandleTypeDef *hnand)
|
|
{
|
|
uint32_t data = 0U;
|
|
uint32_t deviceaddress = 0U;
|
|
|
|
/* Identify the device address */
|
|
if(hnand->Init.NandBank == FSMC_NAND_BANK2)
|
|
{
|
|
deviceaddress = NAND_DEVICE1;
|
|
}
|
|
else
|
|
{
|
|
deviceaddress = NAND_DEVICE2;
|
|
}
|
|
|
|
/* Send Read status operation command */
|
|
*(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_STATUS;
|
|
|
|
/* Read status register data */
|
|
data = *(__IO uint8_t *)deviceaddress;
|
|
|
|
/* Return the status */
|
|
if((data & NAND_ERROR) == NAND_ERROR)
|
|
{
|
|
return NAND_ERROR;
|
|
}
|
|
else if((data & NAND_READY) == NAND_READY)
|
|
{
|
|
return NAND_READY;
|
|
}
|
|
|
|
return NAND_BUSY;
|
|
}
|
|
|
|
/**
|
|
* @brief Increment the NAND memory address
|
|
* @param hnand: pointer to a NAND_HandleTypeDef structure that contains
|
|
* the configuration information for NAND module.
|
|
* @param pAddress: pointer to NAND address structure
|
|
* @retval The new status of the increment address operation. It can be:
|
|
* - NAND_VALID_ADDRESS: When the new address is valid address
|
|
* - NAND_INVALID_ADDRESS: When the new address is invalid address
|
|
*/
|
|
uint32_t HAL_NAND_Address_Inc(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress)
|
|
{
|
|
uint32_t status = NAND_VALID_ADDRESS;
|
|
|
|
/* Increment page address */
|
|
pAddress->Page++;
|
|
|
|
/* Check NAND address is valid */
|
|
if(pAddress->Page == hnand->Config.BlockSize)
|
|
{
|
|
pAddress->Page = 0U;
|
|
pAddress->Block++;
|
|
|
|
if(pAddress->Block == hnand->Config.PlaneSize)
|
|
{
|
|
pAddress->Block = 0U;
|
|
pAddress->Plane++;
|
|
|
|
if(pAddress->Plane == (hnand->Config.PlaneNbr))
|
|
{
|
|
status = NAND_INVALID_ADDRESS;
|
|
}
|
|
}
|
|
}
|
|
|
|
return (status);
|
|
}
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup NAND_Exported_Functions_Group3 Peripheral Control functions
|
|
* @brief management functions
|
|
*
|
|
@verbatim
|
|
==============================================================================
|
|
##### NAND Control functions #####
|
|
==============================================================================
|
|
[..]
|
|
This subsection provides a set of functions allowing to control dynamically
|
|
the NAND interface.
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
|
|
/**
|
|
* @brief Enables dynamically NAND ECC feature.
|
|
* @param hnand: pointer to a NAND_HandleTypeDef structure that contains
|
|
* the configuration information for NAND module.
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_NAND_ECC_Enable(NAND_HandleTypeDef *hnand)
|
|
{
|
|
/* Check the NAND controller state */
|
|
if(hnand->State == HAL_NAND_STATE_BUSY)
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
|
|
/* Update the NAND state */
|
|
hnand->State = HAL_NAND_STATE_BUSY;
|
|
|
|
/* Enable ECC feature */
|
|
FSMC_NAND_ECC_Enable(hnand->Instance, hnand->Init.NandBank);
|
|
|
|
/* Update the NAND state */
|
|
hnand->State = HAL_NAND_STATE_READY;
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Disables dynamically FSMC_NAND ECC feature.
|
|
* @param hnand: pointer to a NAND_HandleTypeDef structure that contains
|
|
* the configuration information for NAND module.
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_NAND_ECC_Disable(NAND_HandleTypeDef *hnand)
|
|
{
|
|
/* Check the NAND controller state */
|
|
if(hnand->State == HAL_NAND_STATE_BUSY)
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
|
|
/* Update the NAND state */
|
|
hnand->State = HAL_NAND_STATE_BUSY;
|
|
|
|
/* Disable ECC feature */
|
|
FSMC_NAND_ECC_Disable(hnand->Instance, hnand->Init.NandBank);
|
|
|
|
/* Update the NAND state */
|
|
hnand->State = HAL_NAND_STATE_READY;
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Disables dynamically NAND ECC feature.
|
|
* @param hnand: pointer to a NAND_HandleTypeDef structure that contains
|
|
* the configuration information for NAND module.
|
|
* @param ECCval: pointer to ECC value
|
|
* @param Timeout: maximum timeout to wait
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_NAND_GetECC(NAND_HandleTypeDef *hnand, uint32_t *ECCval, uint32_t Timeout)
|
|
{
|
|
HAL_StatusTypeDef status = HAL_OK;
|
|
|
|
/* Check the NAND controller state */
|
|
if(hnand->State == HAL_NAND_STATE_BUSY)
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
|
|
/* Update the NAND state */
|
|
hnand->State = HAL_NAND_STATE_BUSY;
|
|
|
|
/* Get NAND ECC value */
|
|
status = FSMC_NAND_GetECC(hnand->Instance, ECCval, hnand->Init.NandBank, Timeout);
|
|
|
|
/* Update the NAND state */
|
|
hnand->State = HAL_NAND_STATE_READY;
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
|
|
/** @defgroup NAND_Exported_Functions_Group4 Peripheral State functions
|
|
* @brief Peripheral State functions
|
|
*
|
|
@verbatim
|
|
==============================================================================
|
|
##### NAND State functions #####
|
|
==============================================================================
|
|
[..]
|
|
This subsection permits to get in run-time the status of the NAND controller
|
|
and the data flow.
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief return the NAND state
|
|
* @param hnand: pointer to a NAND_HandleTypeDef structure that contains
|
|
* the configuration information for NAND module.
|
|
* @retval HAL state
|
|
*/
|
|
HAL_NAND_StateTypeDef HAL_NAND_GetState(NAND_HandleTypeDef *hnand)
|
|
{
|
|
return hnand->State;
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#endif /* STM32F101xE || STM32F103xE || STM32F101xG || STM32F103xG */
|
|
#endif /* HAL_NAND_MODULE_ENABLED */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|